ERA

Fluted Alloy Seatpost / Seat Pin: 26.4mm - 99g (Near Mint)

Lovely fluted seat pin that weighs sub 100 grams! This one measures 26.33mm with a digital caliper, making it a great candidate for those 1970's French frames that 26.2mm is a bit too small and a...

NOS Milremo Gran Sport Luxe Seatpost: 26.6mm - Fluted - Polished & Black - 2 Bolt - French Made

Rare and gorgeous seatpost that was distributed by Ron Kitching's British company Milremo, but was made in France (Perhaps by JPR or Spidel?). This is a two bolt model that kind of blurs the...

NOS 1990's Velocity Aerohead Rims: 700c x 28H - Gold Anodized - Semi-Aero - RARE (PAIR)

Early version of the classically styled Aero-Head rims straight out of Australia! These are an early version based on the decal, and in rare gold ano. These would be wonderful for a 1990's to early...

NOS Hi-E Asymmetrical Hi-Lo Rear Hub & QR Skewer: 32H x 130mm - Silver

Hi-E hubs were produced out of Tennessee from about 1972 into the early 1990's.  The rear high-low version is a rare one, Campagnolo & Phil Wood made similar hubs with high flange on one side and low...

Cinelli 1A Old Logo Quill Stem: 100mm x 26.4mm - Silver (worn)

Pre 1978 1A, with the old oval logo. Great choice for L'Eroica bikes  and any Italian classic road bike. Condition Fair shape. Lots of wear but still usable Details

Cinelli 1A Quill Stem: 130mm x 26.4mm - Silver (EXC)

Popular classic Cinelli stem, with the new Flying C" winged logo circa 1978 to the early 1990's. Condition Excellent used shape. Some light marks on the driveside extension, and heavier insertion...

Hand Built Track Quill Stem: 115mm x 25.4mm x 65D - Fillet Brazed - Faux Lug - Steel - Unfinished (Needs Slot in Clamp To Ride)

This gorgeous track/pista stem was likely made by a small framebuilder and never quite finished.  All it needs to be ready to ride is cutting a slot in the bolt area of the clamp so it can tighten...

Cinelli XA Quill Stem: 120mm x 26.4mm (Mint But Missing Face Decal)

Cinelli's aero styled alloy quill stem, circa 1980's to mid 1990's.  Condition Mint barely used shape, but the decal/coin faceplate thing is missing. Use that space to put your own decal or find a...

NIB/NOS Raleigh 3/32" Loose Bearings: RML 101(?) - Vintage 1960's 1970's

Pack of 3/32" ball bearings from Raleigh circa 1960's and 1970's. This was originally a pack of 100 bearings, but it was opened and I didn't count. Estimate somewhere between 80 and 100 bearings...

1940's-1970's Hub Axle Nuts & Locknuts LOT: Raleigh - Carlton - Misc French & Italian - 24 pcs

24 piece lot of track nuts, locknuts, etc. Two red Raleigh's, one Carlton, a bunch of random ones. Condition Varied used condition. See photos Details

Magistroni (Frejus?) Seat Binder Collar: 28.5mm - Greco-Roman Pattern - 1940's 1950's 1960's- Steel

Cool Greco Roman geometric pattern on a classic Magistroni seatpost clamp. This clamp has been seen on a few Frejus models, though I don't know if this is Magistroni's own design for aftermarket sale...

Huret Touriste Léger Rear Derailleur: 1940's - Alloy Plates (EXC)

This rare rear derailleur out of France circa wartime to post-war 1943 to 1950.  It was designed around the materials Huret could source during the war, thus the piano wire. The pulley cage slides...

NOS Simplex #1146 Wing Nut For Double Shifters: Steel Plated Bronze - 1940's 1950's

Wingnut screw for 1930's, 1940's, and 1950's braze on shifters. These were found most often on the higher end models such as JUY and Tour De France, lower end models often had simple flat head screws...

Simplex #843 Wing Nut Screw For Single Shifters: Steel Plated Bronze - 1940's 1950's

Wingnut screw for 1930's, 1940's, and 1950's braze on shifters. These were found most often on the higher end models such as JUY and Tour De France, lower end models often had simple flat head screws...

Simplex Route Leger Monobloc Bell Crank Rear Derailleur + Shifter: 3V - 3/32" - 1930's 1940's French (EXC)

This derailleur was fairly similar to the Le Cyclo & Cyclo standard rear derailleurs, consisting largely of a cage with two pulleys, a bell crank, and a chainstay clamp. According to Velobase this...

NOS Le Lewis Rear Derailleur: Alloy - Chainstay Clamp - Two Large Pulleys - 1930's-1940's - Shifter - French - RARE

The Lewis rear derailleur was made in France circa 1934 into the late 1940's. The derailleur is primarily aluminum construction, particularly curious if it was available during the war! It's a pretty...

Large French Bicycle Mudflap: Black Rubber w/ Metal Stars - Antique 1940's / 1950's?

Super rad and huge mud flap from France! My best guess on this is somewhere between 1930 and 1960. It is rubber (though one side has a leather feel) and has neat metal stars riveted to it. The...

Sheffield Mod. 645 Quill Pedals: 1940's 1950's 1960's - Chrome (EXC)

Lovely early set of Sheffield road pedals! These are model 645, and seem to be the same as the earliest Sheffield Sprint pedals except those had one piece center shells. Velobase attributes these to...

Vintage Touring Saddle Bag: Large - Vinyl / Faux Leather (Near Mint)

Vintage faux leather saddlebag, intended for touring. Large size. It is very similar to the Schwinn Approved touring bag Con

NIB/NOS 1950's Toothed & Knurled Headset: 1" Italian 26.4mm - Magistroni / Agrati / Stronglight?

1940's, 1950's headset with knurled top cup and toothed adjustment. The headset appears closest to a Magistroni or Agratii, though came to me in a French box ("Jeu De Direction Legere Marque...

Balilla Mod 61 Brake Levers: Freshly Polished (Near Mint++)

Top of the line levers from the 1960's and 1970's, made by Universal. One of the lever blades has an extra hole drilled by the cable head holder on just one side of the lever, not sure what that's...

Universal Sport Centerpull Brakeset: 1960's 1970's - Long Reach 56/72mm (EXC)

The Sport was a less expensive version of the Universal 61. The springs were different being wrapped under the caliper arms, whereas the Mod.61 springs have short ends on the tops pinned into holes...

NOS CODA Tarantula TX3 Competition Tandem Crankset: 175mm x 44/32/22t + 29t - Octalink - Silver - 1998-2000 - RARE

Extraordinarily RARE tandem crank circa 1999 to 2000.  The Tarantula was first released in 1998 only in Expert TX2 format which was square taper. In 1999 and 2000 the Tarantula Competition TX3 with...

ABL Amateur Bicycling League Waterslide Decal: Small - 1.5" x 2"

Lovely decals  from Amateur Bicycling League of America, which is the predecessor to the current USA Cycling. Condition New Details

ABL Amateur Bicycling League Headtube Waterslide Decal: - 3"

Lovely decals  from Amateur Bicycling League of America, which is the predecessor to the current USA Cycling. Condition New Details

ABL Amateur Bicycling League Patch: Embroidered - 3"

Lovely patches from Amateur Bicycling League of America, which is the predecessor to the current USA Cycling.l Condition New Details

NOS Lyotard Pedal Dust Caps: Screw On - Chrome (Sold In Pairs)

These dust caps were the most prevalent version of caps for Lyotard pedals from sometime in the 1950's (or early 1960's?) all the way through the 1980's.  They were found on most models save the low...

Cane Creek 40-Series Alloy Crown Race: +3mm - 52/40mm - BAA0855K

Crown race for 1.5" steerer, 40 series headsets Condition New Details Model: BAA0855K

Maxxis Freeride Tube: 26" x 2.20/2.50 - Presta - 1.2mm Thick - 293g

1.2mm thick tube for freeride and DH riding Condition New Details 26x2.20/2.50 Pr

Aheadset TF3 Hollow Bolt Star Nut & Top Cap: 1 1/8" - Freestyle / BMX (NEW)

Hollow bolt stem bolt, starnut, & top cap for Freestyle / BMX bikes that need the brake cable routed through the stem.  Distributed by Cane Creek Condition New Details

SPIKE Spank Race 2 Stem: 1 1/8" x 35mm x 31.8mm Clamp - Black (NEW)

Highly rated MTB stem! Condition New in box Details Length: 35mm Bar clamp: 31.8m

Race Face Ride XC Seatpost: 31.6mm x 375mm - 0 Setback - Black (NEW)

Strong, attractive, reliable, and affordable post from RF in a harder to find 31.6mm size. Condition New in box Details Diameter: 3

NOS Campagnolo Record 10 Speed Front Hub & QR Skewer: 36H - Silver/Polished

This is a 1999-2006 Record hub, which is unique in that it has an oversized hollow axle.  This generation were truly great hubs, and pretty hard to find. They were the last of the classically styled...

Selle SMP Lite 209 Saddle: White & Pink "Lady" - Stainless Steel Rails (NEW)

Harder to find white with pink version, that for no real reason says "Lady". Per the SMP website it's the exact same saddle as the solid color versions. It's not a women's specific saddle, both women...

NIB/NOS Galli Criterium Brake Levers: Red Ano - Drilled - Gum Hoods - RARE

RARE red version of the 1980's Galli Criterium levers. These are seen occasionally in silver and gold, but almost never in red. The lever blades are drilled on the lower half's front and sides and...

FSA Vision Tri-Gel Road/TT/Tri Saddle: Black (New)

Supportive and sleek saddle for triathlon and time trial racing Condition New, no box Details Black

KMC Missing Link CL555 11-Speed: Shimano/SRAM/Campagnolo - Silver (Sold in Pairs)

Perfectly connects KMC, Shimano and Campagnolo 11 Speed Chains. Non-reuseable. Requires chain connector pliers Condition New Details

Campagnolo Gran Sport 1005/2 Front Derailleur: Matchbox Push Rod - 1950's - 1960's (NEAR MINT+ Show Worthy)

Exceptionally clean example of Campagnolo's top level front mech from 1954 (the first year the world logo appeared on this derailleur) to 1957 when the Record model was released.  The first gen was...

Polished Campagnolo Nuovo Record Front Derailleur: 28.6mm 1052/1 - 1970's (EXC+)

This polished NR FD seems to be a 1970's model, though it has the wide upper arm barrel that's usually not found in the 70's. Circlip, no cable stop/lip, pebbled clamp.  These are a bit less common...

Campagnolo C-Record A010 Rear Derailleur: 2nd Gen 1987-1989 (Near Mint)

Super rare new old stock example of the 2nd gen Campy C-Record rear derailleur circa ~1987 to 1989.  This second generation was in my opinion the most refined aesthetically out of the three...

NIB/NOS JPR 1" Threaded Headset: ITA Threads - Dural Ultralight 68g - JP Routens Designed / BF Belleri Built(?) - Black - RARE

From the workshop of Jo Routens / Jean Paul Routens, an exceedingly rare and extra light all-aluminum French headset from the 1970's into early 1980's! It was the prime headset choice of...

Stronglight 49 Cyclotourist Crankset: 170mm - French - 1950's 1960's Early Model - Alloy Dust Caps

The model 49 / 49D crank was introduced in 1949 and ran until the 80's with only minor changes.  This very clean example is an early model from the late 1950's or 1960's. It's identified as such via...

Campagnolo Chorus 8/9 Speed Front Derailleur: 34.9mm - Pre 2000 (Near Mint)

This is a hard to source 8 speed into early 9 speed Chorus front derailleur that ran from about 1995 to 2000.  It has a flat outer plate without cutouts, and is the last version to not state 9/10...

NOS Specialized Flag Bottom Bracket Spindle: 124.5mm x 73mm - Triple - Square Taper - 1980's - 1990's

This BB spindle is a mid 1980's version to work with the Specialized Flag crank among others. Works with most cup and cone bottom bracket cups. Condition New old stock, no box. Some shop wear Det

NIB/NOS Specialized Bottom Bracket Spindle: 122.5mm x 73mm - MTB Triple - Square Taper - 1980's - 1990's - Bolts

This BB spindle is a late 1980's to early 1990's version. It is a 122.5mm length, for many triple mountain bike cranks such as Shimano XT M730/M735/M739 / Deore / LX / DX, Specialized Pro, etc. Works...

Chris King 1" NoThreadset Stem Top Cap: Silver - One Inch (New)

Top cap for your vintage or modern one inch Chris King NoThreadset threadless headset in silver. Condition New, no package. Slightest shop wear, though they're way cleaner than they look in the...

NOS REG ATOX 313 Bidon Water Bottle: 1960's-1980's - Classic Blue - Knurled Grips - L'Eroica

Classic Italian water bottle from the 1960's, 1970's, and early 1980's.  These were very popular with racers and randonneur's alike. Condition New old stock.  Just a tiny bit of shop wear.  Plastic...

NOS REG ATOX 313 Bidon Water Bottle: 1960's-1980's - Yellow - Knurled Grips - L'Eroica

Classic Italian water bottle from the 1960's, 1970's, and early 1980's.  These were very popular with racers and randonneur's alike. Condition New old stock.  Just a tiny bit of shop wear.  Plastic...