Road Brake Levers

Velo Orange Grand Cru Brake Levers: Caliper/Cantilever Short Pull - 76g! 23.8mm & 22.2mm - Polished (NEW)

These may be the lightest flat bar brake levers on the market (or ever?) at 76 grams per pair! They are remiscent of Kooka Racha levers from the 1990's, and weigh 20 grams lighter!  They fit both 22.2mm mtb and city handlebars (with included shims)...

Campagnolo Nuovo Record Brake Levers: #2030 - NOS GUM Hoods (Near Mint+)

3rd generation NR levers from ~1978-1985. This is the only generation with the shorter reach levers. Brev Camp in pivots Comes with a set of mismatched Shield logo gum hoods, tan and brown. Condition Near mint or better lightly used shape levers plus...

Campagnolo Nuovo Record Brake Levers: 1st Gen #2030 - NOS GUM Hoods (Near Mint

Rare set of first gen NR levers, identified by the round hole on the back of the blades vs the later (and MUCH more common) lever's "U" shaped opening.  The lever blade is also slightly different, with a bit more bend producing a LONG reach and a...

Campagnolo Super Record Brake Levers: #4062 - Brown GUM Hoods (Near Mint & One w/ Scrape)

Drillium Super Record levers with their original brown/tan gum hoods. Condition One lever is near mint or better with barely a mark, the other has a scrape down the outside but otherwise near mint shape.  The gum hood on the scraped one is supple...

Campagnolo Super Record Brake Levers: #4062 - Brown GUM Hoods (Near Mint+)

Drillium Super Record levers from their 2nd generation circa ~1976-1983. These come with their original brown/tan gum hoods. Condition Near mint or better lightly used shape. Levers have some tiny marks but none significant.  Hoods are supple and...

Campagnolo Super Record Brake Levers: #4062 - White Original Hoods (Mint LOW MILES

Drillium Super Record levers from their third generation circa 1984 to 1987. These are identified by their white hoods, no markings in lever pivots, and shield logo clamps. Condition These are so clean I almost thought they were NOS. They're mint with...

Campagnolo Athena D500 Brake Levers: White Hoods - Aero/Non - Lighter Than C-Record!

Mid to late 1980's Athena levers with textured white hoods.  These differentiate quite minimally from C-record, with the major difference being the lack of the word "BREV" engraved on the pivots as well as plastic bodies (which make them lighter...

Campagnolo C-Record Brake Levers: 4th Gen 1992-1993 - Top Hole - Black Hoods (Near Mint++ LOW Miles)

Last generation of the C-Record brake levers circa ~1992 to 1993. These are identified via the round hole at the top of the lever blades, only available in aero routing, black hoods only, and alloy bodies. These C-Records have polished lever clamps with...

NIB/NOS Shimano Dura Ace EX BL-7200 Brake Levers & Gum Hoods: Drilled - Vintage 1970s 1980s

Rare untouched set of EX levers with original tan gum hoods! The Dura Ace EX group ran concurrently with the wild aero 7300 Dura Ace AX series, circa ~1978 to 1984.  Condition New old stock in sealed retail package. Hoods feel great and show no...

Tektro RX 2.0 Inline Cross Top Brake Levers: 23.8mm - Black/Polished (NEW)

Inline brake levers for the flats of your cx bike, townie, or road bike.  This is the smaller 23.8mm clamp size, that fits bars with 25.4mm/26mm/26.4mm clamps or some 31.8mm bars that taper down  after the clamp area. Condition  New, no...

Shimano Dura Ace SW-7971 Di1 10s Bar End Shifters + BL-TT79 TT Brake Levers: Carbon

Matching set of Dura Ace 7900 series Di2 bar end shifters and time trial brake levers. Condition Shifters are almost mint. I was told they work just fine, but I have no way to test them. Levers are excellent. Somehow the inside face of the left lever...

Campagnolo Super Record Brake Levers: #4062 - Drilled - Rustines Gum Hoods

Fairly nice set of SR drillium levers with gum hoods from Rustines! Identified as Super Record by the drilled blades with vertical text shield logo.  Perfect for your restoration show road bike.  Condition There's some...

Campagnolo C-Record / Croce D'Aune Powergrade Brake Levers (LOW MILES Near Mint++)

3rd/4th gen Corsa Record brake levers from 1987-1991.  These came with Delta brakes, and feature the Powergrade adjustment capabilities.  The Croce D'Aune and C-Record Powergrade levers are the same. The lever blades seem shinier than normal, I...

NOS Gipiemme Azzura / Crono Sprint Brake Levers: Snakeskin Pattern! Same As Modolo Professional

These rare and unique levers are Gipiemme's 2nd from top of the line, just below the drilled Crono Special. They were made by Modolo, and are essentially the same as Modolo Professional levers. They have the large knurled pivots, both Modolo and GPM's...

Balilla Mod 61 Brake Levers: Freshly Polished (Near Mint++)

Top of the line levers from the 1960's and 1970's, made by Universal. One of the lever blades has an extra hole drilled by the cable head holder on just one side of the lever, not sure what that's about. These don't have clamps, but they have clamp bolts...

Universal Mod 61 Brake Levers: Freshly Polished (Near Mint++)

Top of the line levers from the 1960's and 1970's.  These were also available with Balilla logos, and are often used to replace the inferior Mafac brake levers. These have been polished on every surface including blades, bodies, barrel adjusters...

NIB/NOS Galli Criterium Brake Levers: Red Ano - Drilled - Gum Hoods - RARE

RARE red version of the 1980's Galli Criterium levers. These are seen occasionally in silver and gold, but almost never in red. The lever blades are drilled on the lower half's front and sides and Galli logo engraved vertically at the top.  These...

Paul Cross Levers: Left/Right Pair - 31.8mm - Silver (NEW)

The Cross Lever is an inline brake designed for use on the flat upper section of drop handlebars. It can be used with short-pull or long-pull brakes and road bars. Obviously popular on cyclocross bikes.  They're also a great safety feature for...

NOS MAFAC Course / 2000 Brake Levers w/ 1 Brown Full Hood

This set of Mafac levers comes with one pristine full hood in brown with barrel adjuster and barrel adjuster cover! Racing levers to fit both half hoods (Course model) and full hoods (2000 model).  The model of these is determined by the hood and...

Mafac Course 130 Promotion Brake Levers: White Plastic Body & Barrel Adjusters - Hoodless Design (EXC+)

These surprisingly sleek brake levers are called both the Promotion and the Course 130 brake levers in Mafac literature from the 1970's and 1980's.  They were designed to be ridden without hoods, and thus have a smooth and continuous derlin plastic...

NIB/NOS MAFAC Racing Brake Levers: Twin Cable Tandem + Standard - For Half or Full Hood (Pair)

This is a lever set consisting of one twin cable lever and one standard single cable lever.  The twin cable lever is designed to control two brakes from one lever, and was marketed to tandem bikes (particularly when running both a drum brake and rim...

NIB/NOS MAFAC Course / 2000 Brake Levers: For Half or Full Hood (Pair)

Racing levers to fit both half hoods (Course model) and full hoods (2000 model).  The model of these is determined by the hood and the barrel adjuster.   Condition: New old stock in oem bag with model tag.  Pristine. First set...

Mafac Course 121 Competition Half Hood Racing Brake Levers: Polished (Near Mint+, Dry Hoods)

This are the half-hood Mafac professional racing Course 121 levers from the 1960's, 1970's, and into the 1980's.  This is the racing version identified by the small adjuster barrels, vs the competition with larger barrels.  This pair has been...

NOS Campagnolo C-Record Graphite Powergrade Brake Lever: Single - 3rd/4th Gen

This is a single C-Record PowerGrade brake lever in the increasingly rare "Graphite" finish.  The Graphite was a darker grey than the Century finish, which was only offered at the Record level. These were issued with both later generation Delta...

NOS Mafac Tandem Dual Cable Brake Lever: Course 121 - 1950's 1960's

This lever is designed to control two brakes from one lever, and was marketed to tandem bikes (particularly when running both a drum brake and rim brakes).  These are a half hood design, and the hoods with 2 cable holes are extremely rare. Condition...