Vintage Bicycle Tools

Campagnolo "N" Wheel Dishing Tool: 1960's 1970's

This Campy wheel dish gauge is a highly visible piece in the complete Campagnolo tool kit.  It's listed in the older catalogs only as "N", and the more modern catalogs as UT-HU010 or 2236001 (though the tool remains unchanged from the 1960's to...

Campagnolo #770 Crank Extractor / Puller Tool: Standard 22mm x 1" Size

This 1970's or 1980's Campy crank puller works on most Campagnolo, Sugino, Shimano, etc cranksets.  It is right hand threaded.  The only square taper cranks it will not fit are 1980's C-Record, Athena, and Chorus which required left hand thread...

Campagnolo #770 Crank Extractor / Puller Tool: Standard 22mm x 1" Size (Near Mint)

This 1970's or 1980's Campy crank puller works on most Campagnolo, Sugino, Shimano, etc cranksets.  It is right hand threaded.  The only square taper cranks it will not fit are 1980's C-Record, Athena, and Chorus which required left hand thread...

Campagnolo Pedal Dust Cap Wrench: #710 - Splined Tool (EXC)

This is the tool required to remove the dust caps from your Campagnolo Nuovo/Super Record or Gran Sport pedals.  It also fits MKS and many other pedals.  The other end is an 11mm hex wrench, to fit the bearing nut on your pedals...

Campagnolo L Wrench #767: 5mm Allen Key w/ Pineapple Grip (EXC)

Every cyclist's tool kit can be improved with a genuine Campy hex wrench!  Cool to hang from your keychain too. Campagnolo officially designated this for chainring bolts as that was often the only 5mm allen bolt on bikes in the classic 1960s...

Campagnolo T-Wrench #143/2: 8mm + 6mm - 1960's 1970's Early Version (EXC)

This is an early version of the classy Campy "T" wrench. It is easily identified via the allen key shaped vertical shaft, which became a round shaft somewhere in the later 1970's. Socket wrench in 8mm socket + 6mm hex.  This is what you need to...

Campagnolo T-Wrench #143/2: 8mm + 6mm - For Pedal Bearing Adjustment (Near Mint)

Classy Campy "T" socket wrench in 8mm socket + 6mm hex format.  This is what you need to adjust the bearings on your NR/SR pedals. Condition near mint lightly used shape Details Model #143/2 (called model #1130006 by the late...

Campagnolo Peanut Butter Wrench #769: 15mm Track Spanner / Crank Bolt Remover - Early Version (Near Mint)

Every mechanic needs a Campy PB wrench in their toolbox (and one in their cupboard for making a PB&J sandwich!).  Most often used as a pista axle nut wrench at the track, or to remove/install 15mm crank fixing bolts. This is an early version...

Campagnolo #771 Seatpost Spanner: 2-bolt Campy Seatposts & Brooks Saddles (Near Mint)

A tool that was once in every cyclists repair kit and is nearly a requirement for L'Eroica rides!  This offset spanner wrench makes adjustment of the 2-pin Campy seatpost a snap.  The other end adjusts Brooks saddle tension...

Campagnolo "Q" Cone Spanner / Locknut Wrench Set: 15/16mm (2) + 13/14mm (2) (Pair)

This is a set of four Campy cone wrenches, two 13/14mm and two 15/16mm. Condition Excellent used shape. Details Model: Q 

Campagnolo #713 Pedal Wrench 15mm / Fixed Cup BB Spanner Tool

Cool combination 15mm pedal wrench and bottom bracket fixed cup wrench. Condition Average used shape with some wear.  

Campagnolo #713 Pedal Wrench 15mm / Fixed Cup BB Spanner Tool (Near Mint+ Barely Used)

Cool combination 15mm pedal wrench and bottom bracket fixed cup wrench. Condition Near Mint barely used shape! Clean enough look great in a wooden Campy tool box  

Campagnolo #712 Bottom Bracket Lockring Adjusting Tool / Headset 32mm Wrench (EXC)

Classic Campy wrench for installing, removing, and adjusting your headset and BB.  Wrench end is 32mm.  From the 1960's through 1990's. Condition Excellent lightly used shape.  Slight cosmetic wear, almost no wrench flats or adjusting...

Campagnolo Fork Crown Race Remover #729: For 1" Fork Crowns (Near Mint)

Rare Campy crown race remover tool!  These are invaluable when working with vintage steel bicycles.  They're one of the best ways to remove a race without damaging it or the fork crown.  This tool goes around the crown from the bottom,...

Campagnolo Freewheel Tool: "I Handle" + #704 Reducer Bit For 14t (EXC)

Earlier steel I handle and 704 freewheel tool for 14t cog freewheels. Condition Excellent used shape, some patina. Details Steel handle 704 bit for 14 & 15 tooth small cog freewheels   

Campagnolo "R" Derailleur Alignment Gauge Tool - Part # IT-VS030 (EXC)

Legendary Italian version of the Park Tool DAG.  Stands out visibly in the Campy tool box. Condition Excellent used shape!  It has a nice light patina, and the screw spins nicely.  No damage, no rust. Details Model: R,...

NOS Zeus Pump Umbrella Clip: Ref. 15 - Chrome

Clone of the Campagnolo #632 frame pump umbrella clip.  circa 1970's to 1980's. Condition New old stock.  pristine Details Steel

NIB/NOS Campagnolo Pawl / Spring Holder Tool: #7260223

One of the two tools needed to hold your pawls and springs in while installing on Campy freehub bodies.  This is needed for your C-Record and similar hubs. Condition New in package

Var 302 Lockring Spanner: 250mm (Near Mint)

Vintage lockring wrench for track/pista bikes. Condition Near mint lightly used shape

NIB/NOS Silca Impero Frame Pump & Head: 45.5cm Full / 32.5cm Body - Black

Fresh Silca Impero with head in black. Short ones like these are great for chainstay mounting randonneur style. Condition New old stock in retail packaging!  Hardly any shop wear.  The last one purchased does not have a...

NIB/NOS Silca Impero Frame Pump & Head: 46cm Full / 33cm Body - Silver

Fresh Silca Impero with head in silver. This one's rather short and ideal for mounting along the seatstay, randonneur style. Condition New old stock in retail packaging!  Hardly any shop wear.  The last one purchased does not have a...

Campagnolo Grasso 10-N 500g Grease Tub: 3/4+ Full - 1980's C-Record Era - RARE!

This is arare 500 gram white jar of Campagnolo Grasso-10-N grease from the mid to late 1980's "C-Record era".  Even back in the day, this would have been so cost prohibitive that only pro bike shops that do a large quantity of Campy builds would...

NIB/NOS Campagnolo Grasso 10-N 1000g Grease Tub: Sealed! - 1980's C-Record Era - RARE!

This is an absurdly rare UNOPENED 1,000 gram white jar of Campagnolo Grasso-10-N grease from the mid to late 1980's.  Even back in the day, this would have been so cost prohibitive that only pro bike shops that do a large quantity of Campy builds...

NOS Silca Impero Frame Pump: XL Size! Silver / Metallic Gold - Silca Head - Fits ~60cm to 65cm

Killer deal on extra long Impero frame pumps!  These will fit XL sized frames roughly 60cm and larger, with openings between tubes of 55cm and 60cm. Condition New old stock, no package.  I bought these in a bulk oem box from the estate of...

NOS GT I-Drive Perfect Preload Gauge: For Sag Adjustment

Sag gauge for the early 2000's GT I Drive full suspension frames, such as the XCR and Timberline FS. Condition New old stock, no package

1970's Bicycle Helmet Sizing Gauge: Skid-lid II

This appears to be a head sizing tool for the mid 1970's San Diego helmet manufacturer, Skid Lid.  It's surely useless today, but it's a weird piece of ephemera from cycling's dangerous history. Condition Excellent used shape  

Phil Wood 1st Generation Hub Bearing Tool Part: 1970's

This domed cylinder tool piece is part of Phil Wood's first ever tool made, which was a bearing press/removal tool for their first gen 3 piece hubs.  There's a photo of the entire tool set, please note this ONLY includes the domed cylinder piece in...

Retro Rockshox Suspension Fork Oil: 1990's - Made in USA - Green Label - 5wt - 8oz

Impossible to find early edition Rockshox suspension oil.  This is from the 1990's, before the SRAM buyout and when it was still made in the USA!  Perfect if you repair vintage forks and like how this oil works better than the new stuff. ...