Shimano Downtube Cable Stops: STI / Bar End Adapter Barrel Adjusters: SM-CS50 Concave - Bolts (pair, New)

These adapters bolt onto your vintage bike's downtube shifter mounts, and act as cable stops & barrel adjusters for STI, Ergo, and bar end shifters.  This is the version with housings that are curved (concave) to fit around your steel or...

NIB/NOS Shimano Dura Ace Shifter Hardware Kit: Downtube Cable Stop STI Adapter Barrel Adjusters (SM-ST74) - BB Cable Guide (SM-SP17-M) - Ferrules

The adapters bolt onto your vintage bike's downtube shifter mounts, and act as cable stops for STI, Ergo, and bar end shifters.  This is the version with housings that are curved (concave) to fit around your frame's downtube.   This is...

NOS Shimano Stainless Steel Top Tube Cable Clips: Set of 3 w/bolts - Later 1980's

Nice finishing touch for your Shimano equipped vintage road bike!  These are the 2nd gen version, with a smooth face featuring the bold SHIMANO in a rectangle.  These are a lot sleeker than the early ones with ridged chevron faces and a chrome...

NOS Sachs Huret Downtube Shifter Braze On Adapter Clamp: 28.6mm - Silver

This works on all standard 1 1/8" downtubes.  It is compatible with most shifters of both friction and indexed nature.  They will also fit barrel adjuster adapters to work with STI and bar end shifters. Condition New old stock,...

NOS Shimano Downtube Shifter Braze On Adapter Clamp: 28.6mm - 600 Arabesque SL-6200

This downtube shifter clamp from the 1980's came stock on the 600 EX Arabesque SL-6200, with slight variations in the Dura Ace models.  This works on all standard 1 1/8" downtubes.  It is compatible with most shifters of both friction and...

NOS DIA COMPE / Weinmann Step Down Brake Lever Ferrules: Road / BMX / Flat Bar (Sold in Pairs)

These ferrules fit in the top of non-aero road brake levers, as well as for flat bar bmx and city brake levers.  They came with DIA COMPE, Gran COMPE, Gipiemme, Weinmann, and similar levers.  They work with most levers that don't have threaded...

NOS Modolo 919 Anatomic Brake Hood: RIGHT Only - Gum / Tan

Do you need a new hood for your right Modolo lever?  Grab this one at a discount over a full set!  This fits most Modolo levers, including Professional, Master Pro, Prestige, Speedy, Equipe, etc as well as Scott Superbrake levers...

NOS Shimano Dura Ace EX 7200 FRONT Shift Cable: Braided Stainless Steel - Vintage 1970's 1980's (Sold Individually)

These are top level derailleur cables from the late 1970's to mid 1980's.  They are braided from fine wires of stainless steel, and have a diameter of roughly 1.47mm to fit vintage 5mm housing.  These are designed for friction systems, as...

NOS Shimano Dura Ace EX 7200 Shift Cable: Braided Stainless Steel - Vintage 1970's 1980's (Sold Individually)

These are top level derailleur cables from the late 1970's to mid 1980's.  They are braided from fine wires of stainless steel, and have a diameter of roughly 1.47mm to fit vintage 5mm housing.  These are designed for friction systems, as...

NIB/NOS Paramount ATB Oversized 2mm Brake Cable & Housing: FRONT - Brass Cable Head Shim For 4-Finger Levers - Silver Housing - Ferrules

Front brake cable in OS 2mm size that came on early retro mountain bikes from the 1980's.  The cable is thicker than modern cables (2mm vs 1.6mm), and features the larger oversized end that will only work with early mountain bike brake levers...

Rustine's Campagnolo Nuovo/Super Record + Modolo/Superbe Brake Lever Hoods: White (NEW)

Set of Euro Asia reproduction rubber hoods to fit Campagnolo brake levers including Nuovo Record, Super Record, Triomphe, Victory, Gran Sport.  They also fit Suntour Superbe, Gipiemme Crono Sprint, Modolo Corsa & Speedy levers.  These...

Rustine's Campagnolo Nuovo/Super Record + Modolo/Superbe Brake Lever Hoods: Black (NEW)

Set of Euro Asia reproduction rubber hoods to fit Campagnolo brake levers including Nuovo Record, Super Record, Triomphe, Victory, Gran Sport.  They also fit Suntour Superbe, Gipiemme Crono Sprint, Modolo Corsa & Speedy levers.  These...

Campagnolo Nuovo/Super Record + Suntour Superbe Brake Lever Hoods: Tan/Brown - No Logo (NEW)

Set of Euro Asia reproduction rubber hoods to fit Campagnolo brake levers including Nuovo Record, Super Record, Triomphe, Victory, Gran Sport.  They also fit Suntour Superbe, Gipiemme Crono Sprint, Modolo Corsa & Speedy levers.  These...

Shimano Mountain Bike Brake Cable Set: Two Cables, Housing, Ferrules

Set of brake cables and housing for a full bike. Condition New Details 2 MTB cables 2200mm of M-System housing Ferrules Cable Ends

Sunlite Velo Classic Mountain Bike Grips: Black - Oury Moto Style

Slip-on MTB grips in the style of old school moto grips from the 1980's. Condition New Details Black

NOS Vintage Grey Brake Cable Housing: Campagnolo Nuovo Record / Modolo Style - Unlined - 1500mm

This vintage unlined and unbranded housing looks extremely similar to Campagnolo Nuovo/Super Record housing.  It's grey color is a very close match, and it has that semi translucent look where you can just faintly see the inner steel coil. ...

XL Seatpost Binder Bolt: 22mm I.D. - Chrome (NEW)

Attractive chrome logo seatpost binder bolts for any classic or modern road bike. Condition New Details Chrome Inside diameter (between lips): 22mm

NOS Sugino Seatpost Binder Bolt: 19mm - Chrome

Attractive chrome Sugino logo seatpost binder bolts for any classic road bike. Condition New old stock. Details Chrome Inside diameter (between lips): 19mm

NOS Campagnolo Quick Release Seat Binder QR: #1240 - 1970's 1980's - Chrome

The classy seatpost quick release from Campy, circa 1978 (post-CSPC) to 1987ish.  These are great for when your traditional seat pin binder bolt isn't gripping the ears well enough, for early mountain bikes (quite the upgrade!) or anyone who wants...

NOS/NIB Benotto Professional Cello Bar Tape: Bianchi Blue - Textured - End Caps - Vintage 1970's 1980's

An old favorite for vintage road bikes!  This tape is thin, flexible, and does not get dirty!  This is a deep blue with lighter blue caps.   Benotto tape was introduced in about 1975 and ran through the mid 1980's, and is a top choice...

NOS Velox JANTEX Sew-Up Thread for Tubular Tires: Vintage 1970's L'Eroica Collectible - 10 Meters

Original sewup tire thread for when your L'Eroica bike's repair kit needs 100% period correct authenticity.  Great little cycling knick knack gift too! Condition New Old Stock

NOS/NIB Rockshox Judy Long Travel Rebuild Kit: 80mm - Hydracoil - 1998-2002 - Springs (no spring retainers/circlip)

This is all you need to extend your 63mm travel Judy fork to 80mm, and/or restore your Judy's performance to factory new levels!  It's essentially a full rebuild kit, minus seals and wipers (which are readily available for $15-$30).  Fits all...

Paul Components Funky Monkey Front Cable Hanger: 1" - Silver (New Take-off)

Classy and super stiff front brake cable hanger for your centerpull and cantilever brakes.  This fits on your one inch steerer in place of a headset spacer. Condition New, take off.  Less than 20 miles, close to perfect Details 1"

NIB/NOS DIA-COMPE 287 Aero Brake Lever Hoods: Black - 287. 7K (Pair)

Hard to find replacement hoods for the DIA-COMPE 287 brake levers which were designed for specifically cantilever brakes.   Condition New in factory sealed bag Details Black Model on package: 287.7K

Shimano Dura-Ace SL-BS79 Outer Cable Guide - Y86B22000 - For Bar End & STI Shifters (PAIR)

Shimano recommends the use of these SL-BS79 outer cable guides when you are running outer cables under bar tape (ie higher end STI levers or bar end shifters/brakes). They hold the outer cable straight and prevent the bar tape causing any kinks or...

NOS Marcel Torino Wing-Nuts: Brass + Chrome - 5/16" Axle (Sold In Pairs)

Before Tullio Campagnolo invented quick releases in 1927, the best method of wheel attachment was the axle wing nut.  They provide a tool-free installation and removal, vs traditional axle nuts which require a wrench.  Today, they are loved by...

Campagnolo Porta-Catena Chain Holder: 1-Bolt Version (7316008)

This is a rare 1970's and early 1980's dropout chain rest, which was a part of the Campagnolo Nuovo Record Portacatena 1013/6 downtube shifter system.  It's largely a standard friction shifter, but the lever has a flip lever which shifts the...

Middleburn R01 Triple Road Crank Spider: 104/64mm - 44mm Chainline (NEW)

This 4 bolt, 104mm BCD is designed for triple and double on the Middleburn R01 crank arms (and probably Middleburn's other crank arms, they're all the same interface.  The difference seems to be the chainline the spider produces on a given crank...

Middleburn RS7 Mono X1 Crank Spider: 104mm - 50mm Chainline (New, take off)

This 4 bolt, 104mm BCD is designed for one-by and singlespeed setups on the Middleburn RS7 crank arms (and probably Middleburn's other crank arms, they're all the same interface.  The difference seems to be the chainline the spider produces on a...

Beacon Bar Tape: White Pebbled / Textured - Thicker Vinyl - Vintage 1980's - Made in Japan

Unique vintage bar tape!  This is a strong plastic/vinyl with a high contrast pebbled texture. Condition New in package  

NOS/NIB Vintage Benotto Professional Cello Bar Tape: Blue / Gold / Purple - Blue Caps - Smooth Type

Part of Benotto's flag colored series, this features navy blue to match the standard blue Benotto end caps, the yellow/gold Benotto uses, and a royal purple.  This is a brilliant gem-like color...

NOS/NIB Vintage Benotto Professional Cello Bar Tape: Dark Blue / White / Dark Blue - White Caps - Smooth Type

Part of Benotto's flag colored series, this features very dark navy blue outers sandwiching a layer of white.   Condition New Details Blue/White/Blue White handlebar end caps Smooth Type

NOS/NIB Vintage Benotto Professional Cello Bar Tape: French & USA Flag - Tri Color Red-White-Blue - Smooth Type

Rare patriotic color scheme on the famous Benotto Cello-Tape!  These colors are both of the French flag and the USA flag. Condition New Details Red, white, and blue Blue handlebar end caps Smooth Type

NOS/NIB Vintage Benotto Professional Cello Bar Tape: Italian Flag Red-White-Green - Red End Caps - Smooth Type

Rare Italy flag color scheme on the famous Benotto Cello-Tape!  Great for your L'Eroica bike.  This set has red Benotto handlebar end caps. Condition New Details Red, white, and green stripe Red Benotto Caps Smooth Type

Shimano SIS-SP40 Step Down Ferrule: 4mm I.D. Derailleur Housing to 4mm Cable Stop - Alloy - Sealed Type (Sold Individually)

This OEM Shimano cable stop is designed to fit standard/modern 4mm derailleur cable housing, and steps down to fit the common 4mm chainstay cable stop that's found on both modern frames and vintage Campagnolo-equipped frames.  These have oddly...

NIB/NOS 1990's Shimano Ceramic Bushing Guide Pulley: XTR M900 / Dura Ace 7400/7401/7402

This is an OEM replacement ceramic bush G-Pulley for the XTR RD-M900 / RD-M950 / RD-M952, plus XTR RD-7400/7401/7402, among other high end derailleurs from the late 1980's into 1990's. Condition New old stock in sealed oem plastic bag Details One...

NOS Huret Luxe Wing Nuts: Chromed Brass - 5/16" For Front Hub Axle (Sold In Pairs)

Before Tullio Campagnolo invented quick releases in 1927, the best method of wheel attachment was the axle wing nut.  They provide a tool-free installation and removal, vs traditional axle nuts which require a wrench.  Today, they are loved by...

Grab On MTB-1 Foam Grips & End Caps: Early MTB / Old School BMX - 1980's 1990's - Black (Near Mint)

Rare and minty set of original Grab-On Mountain 1 foam grips with logo end caps.  These are the round version with subtle flare to small flanges at each end.  The MTB-2 was a hex shape. These were a higher density foam than the current foam...

Tommaselli Moto Grips: Klunker / Early MTB / Old School BMX - 1970's 1980's - Black - Diamond Pattern (EXC-Near Mint)

Rare set of Tommaselli moto grips, that were often paired with Tommaselli Racer brake levers and XT Deerhead BL-M700 brake levers on Klunkers like the 1940's Schwinn Excelsior and on to the first Specialized Stumpjumper mountain bike and...

Phil Wood Rear Track Hub Shell: High Flange - 36H - Silver - Single (NEW)

Fresh track hub shell, sans any hardware.  This is for the Track Classic high flange, single sided (not flip flop).  We have two of these.  The first one that gets ordered will come with one bearing pressed in. Condition  New, never...

Frank Spivey(?) Long Cage For Campagnolo Nuovo Record: Drillium - Bullseye Pulleys - 123mm c-c - Cupertino/Spence Wolf (Near Mint+)

This custom extra long cage quite likely came out of Frank Spivey's workshop, alongside the better known yet ultra rare Spence Wolf Alpine.  This one is even longer, at 123mm center to center on the pulley bolts!  The cage consists of two...

Campagnolo EC-RE600 1998-08 Ergopower 9/10 Speed Replacement Ergo Hoods : BLACK EC-RE600 w/ Round Tip (NEW)

Replacement hoods for all 10 speed Ergo shifters from 1998 to 2008 (Record, Chorus, Athena, Daytona, Veloce...), as well as the post 1998 9s shifters that have the rounded front piece Condition  New in sealed retail box (1st photo is stock...

Campagnolo 8/9 Speed EC-RE500 Ergopower Hoods: Pre-1998 w/ Pointy Tip - Black (NEW)

Replacement hoods for 1st generation Ergopower shifters before 1998.  This includes all 8 speed Ergo and most 9 speed.  These are the levers with the more pronounced point in front.  They fit pre '98 Record/Chorus, pre '99...

NIB/NOS Shimano XTR M952 Shift Cable: Coated Stainless Steel - 1.2mm x 2100mm - Dura Ace 7700

These are the original inner derailleur cables from the XTR M950 and M952 groups, and the parallel Dura Ace 7700 / 7410 on the road side.  It is the late 1990's and early 2000's precursor to the current XTR/DA Polymer Coated cables that retail at...

Shimano XT SL-M770 9 Speed LEFT/FRONT Gear Indicator: (New take-off)

Replacement gear indicator for 9 speed XT shifter, left side Condition New old stock take off?.  Just barely any wear. No mounting screws Details front indicator only

SRAM Rival Medium Derailleur Cage Kit: NO PULLEYS - 11.7515.033.040

Replacement medium cage for SRAM Rival rear derailleurs.  Does NOT include pulleys.  Kit includes inner & outer cage plates, bolts for jockey wheels, spring. Condition New in package Details Part number: 11.7515.033.040

NIB/NOS Campagnolo Alloy Pedal Dust Caps: Nuovo/Super Record / Superleggeri / Gran Sport (pair)

Sooner or later, everybody needs to replace their Campy pedal dust caps! These are the alloy version, which are aesthetically very close to the newer plastic covers, but came stock on a few versions of Record & Gran Sport pedals in the 1960's (of...

Shimano Bicycle Roller Brake Grease for Nexus / Alfine Roller Brakes: 100g Tube

Special grease designed to lubricate Shimano internal hub roller bearings. Condition New Details 100g