Italian Bike Parts

Bottom Bracket Tap: Italian 36mm x 24TPI - 18mm VAR Standard (Fair)

Designed for use with the VAR 380 (or it's modern equivilant the CD-38200) & 40 BB Tapping Set to tap Italian 70mm threaded bottom bracket shells. This right hand threaded tap is used on both sides of the bike, as both sides of the Italian...

Bottom Bracket Tap Set: Italian 36mm x 24TPI - VAR Standard 18mm (Near Mint, Slightly Mismatched)

 Top quality tap designed for use with the VAR 380 (or it's modern equivilant the CD-38200) & 40 BB Tapping Set to tap Italian 70mm threaded bottom bracket shells. Note that while these are both right hand thread Italian for VAR tap handles,...

Bottom Bracket Tap Set: Italian 36mm x 24TPI - VAR Standard 18mm

 Top quality tap designed for use with the VAR 380 (or it's modern equivilant the CD-38200) & 40 BB Tapping Set to tap Italian 70mm threaded bottom bracket shells.  Condition Excellent used shape.  I acquired this from a bike shop...

NOS(?) VAR Bottom Bracket Tap: Italian 36mm x 24TPI

  Top quality tap designed for use with the VAR 380 (or it's modern equivilant the CD-38200) & 40 BB Tapping Set to tap Italian 70mm threaded bottom bracket shells. This right hand threaded tap is used on both sides of the bike, as both...

Fixed Cup Bottom Bracket Remover Jaw Set: VAR 30/1 + 30/2 + 30/3 (Near Mint+)

Complete set of bottom bracket fixed cup jaw adapters for the VAR 30 (and current version VAR BP-03000) & Hozan C-358 fixed cup tools. Condition Near mint or better very lightly used. Cup edges are square with only minor spots of wear. Center...

HKC Hozan Fork Die: 1" x 24 tpi ISO / JIS / English - Steerer Threading & Chasing (EXC)

Invaluable tool for threading and chasing 1" steerers!  Condition Excellent used shape.  Die appears sharp (untested, sharpness not guaranteed) Details 1" x 24tpi for ISO, JIS, BSA, English steer tubes Diameter: 55mm (match this to your...

Threadwell Fork Mill Steer Tube Thread Chasing / Cutting Tool Set: 1" x 24 English Die - Clean Up Threads - Shorten Your Steerer & Re-Thread or Add Threads

Invaluable tool for threading and chasing 1" steerers!  With this you can buy a fork with a steer tube that's too long for your frame, cut it down, and re-thread!  This has extra long arms for control. Condition Excellent used shape. ...

Hozan C-432 Fork Mill Steer Tube Thread Chasing / Cutting Tool Set: Hozan 1" x 24 English/JIS/ISO Die - Clean Up Threads - Shorten Your Steerer & Re-Thread or Add Threads

Invaluable tool for threading and chasing 1" steerers!  With this you can buy a fork with a steer tube that's too long for your frame, cut it down, and re-thread!  This has extra long arms for control. Condition Excellent used shape. ...

NIB/NOS Campagnolo Record/Chorus EC-RE500 8 & 9 Speed Ergo Hoods: 1992-1997 - ORIGINAL Production - RARE

Original 1990's production hoods for 1st generation Ergopower shifters before 1998.  This includes all 8 speed Ergo and most 9 speed.  These are the levers with the more pronounced point in front. Condition  New in original blister,...

Custom Drillium Chainring: 50t x 144mm - Silver (EXC)

Pretty custom drilled alloy chainring for 144mm cranks. Unknown make, but it sure is cool. Condition Excellent lightly used shape. Details 50t BCD: 144mm

Custom Drillium Chainring: 48t x 144mm - Silver (EXC)

Pretty custom drilled alloy chainring for 144mm cranks. Unknown make, but it sure is cool. Condition Excellent lightly used shape. Details 48t BCD: 144mm

Custom Drillium Chainring: 49t x 144mm - Silver (Near Mint+ Low Miles or NOS)

Pretty custom drilled alloy chainring for 144mm cranks. Unknown make, but it sure is cool. Condition Either new old stock or mint barely used. Just a few minor imperfections Details 49t BCD: 144mm

Custom Drillium Chainring: 54t x 144mm - Silver (Mint Low Miles or NOS)

Pretty custom drilled alloy chainring for 144mm cranks. Unknown make, but it sure is cool. Condition Either new old stock or mint barely used. Very minimal imperfections Details 54t BCD: 144mm

Regina CX/CX-S Freewheel: 6 Speed - 13-31t Wide Range MTB / Touring (MINT <100 Miles)

Rare extreme wide range version of the CX/CX-S, suitable for early mountain bikes, touring, or for a hill climbing still appropriate freewheel for your Italian L'Eroica bicycle. This was likely custom built, as it's unusual to see a 31t cog version and...

Campagnolo Nuovo Record Three Hole Front Derailleur: 1052/NT - 25.4mm Clamp (EXC+ Low Miles)

Vintage 3 hole NR front mech from the 1980's, in clamp on format for your classic steel road bike.   Condition This derailleur is really clean, but has a chrome chip on the outer cage. Near mint otherwise with only light marks. Could be...

Campagnolo Nuovo Record Front Derailleur: 28.6mm 1052/1 - Pre 1978 no lip

This is an early version Campy NR front derailleur, from the 1973-77.  It has no lip (introduced in 1978) or cable stop, but it has a circlip.  These are a bit less common than the later 3-hole versions.  Condition Very good used shape...

Campagnolo Nuovo Record Low Flange Hubset: 36H x 126mm - Curved QR - Front/Rear - BSA (Near Mint+ Perfect Bearings)

Curved blade quick releases.  Post-CSPS, made from 1978-1987.   Low flange NR/SR hubs are the gold standard training and racing hubs for classic road bicycles from the 1960's to late 1980's.  They are great looking, last forever,...

Campagnolo Nuovo Record Headset: 1960's 1970's Early Version - Strada 1039 - English (EXC+ Low Miles)

This is a tougher to find early version of the Nuovo Record headset. The locknut and crown race on the 1960's to mid 1970s headsets had smaller font and the locknut had long dashes between words.  In 1970 through the mid 70's the cups had <C>...

Campagnolo #770 Crank Extractor / Puller Tool: Standard 22mm x 1" Size

This 1970's or 1980's Campy crank puller works on most Campagnolo, Sugino, Shimano, etc cranksets.  It is right hand threaded.  The only square taper cranks it will not fit are 1980's C-Record, Athena, and Chorus which required left hand thread...

Campagnolo #770 Crank Extractor / Puller Tool: Standard 22mm x 1" Size (Near Mint)

This 1970's or 1980's Campy crank puller works on most Campagnolo, Sugino, Shimano, etc cranksets.  It is right hand threaded.  The only square taper cranks it will not fit are 1980's C-Record, Athena, and Chorus which required left hand thread...

Campagnolo T-Wrench #143/2: 8mm + 6mm - 1960's 1970's Early Version (EXC)

This is an early version of the classy Campy "T" wrench. It is easily identified via the allen key shaped vertical shaft, which became a round shaft somewhere in the later 1970's. Socket wrench in 8mm socket + 6mm hex.  This is what you need to...

Campagnolo T-Wrench #143/2: 8mm + 6mm - For Pedal Bearing Adjustment (Near Mint)

Classy Campy "T" socket wrench in 8mm socket + 6mm hex format.  This is what you need to adjust the bearings on your NR/SR pedals. Condition near mint lightly used shape Details Model #143/2 (called model #1130006 by the late...

Campagnolo #771 Seatpost Spanner: 2-bolt Campy Seatposts & Brooks Saddles (Near Mint)

A tool that was once in every cyclists repair kit and is nearly a requirement for L'Eroica rides!  This offset spanner wrench makes adjustment of the 2-pin Campy seatpost a snap.  The other end adjusts Brooks saddle tension...

Campagnolo Super Record Titanium Strada Pedals: #4021 - Black Cages (Near Mint)

True Super Record pedals with the Ti spindles, vs the MUCH more common Record SL Superleggeri #1037/a that are the same with steel axles. Quite rare! Condition Near mint lightly used shape. Buttery smooth bearings, though they sound a bit dry and could...

Campagnolo Nuovo Record Downtube Shifters: Milled + Yellow Fill - #1013 Braze

Heavily milled out Campagnolo NR/SR DT shifters with a yellow fill paint! Condition Average used condition with some cosmetic wear. Details Braze on Friction ~1967- mid 1980's

1st Gen Campagnolo Super Record 2-Bolt Fluted Seatpost: 27.2mm - 1970's - Alloy Ears (EXC)

This is a genuine 1st generation Super Record seatpost from 1973-1978.  It is distinguished from the much more common Nuovo Record two-pin seatpost with it's factory flutes, drilled out pivots, alloy clamp side ears, and different inscriptions that...

Campagnolo Super Record Front Derailleur: Braze On - 1052/SR (Near Mint)

Lovely braze on version of the vintage Super Record front mech. Condition Near mint lightly used shape. Near perfect outer cage, slight inner cage wear. Hardware in wonderful shape. Black parts are almost mint. Appropriate for most show...

Campagnolo Super Record 4001 Rear Derailleur: Red Bullseye Pulleys - Pat 1984 (Near MINT+ Low Miles)

Exceptionally clean vintage Super Record rear mech, from the early 1980's.  The jockey wheels are nearly NOS Bullseye in red.  Classic road bicycle show worthy!  Condition Very close to MINT, show bike worthy condition.  There are...

1st Gen Campagnolo "Super Record" Brake Levers: Aftermarket Drillium Front/Back < Long Reach Early NR Levers > Brown Hoods (EXC++)

This is a ~1972-1977 set of Nuovo Record long reach brake levers which has been drilled aftermarket in the format of the 1st gen Super Record levers! They're also drilled on the rear of the levers, something not really seen before on these.  The...

1st Gen Campagnolo Super Record Headset: 1973-1975 - Italian - #4041 Strada - Italian - Alloy (Near Mint, RARE0)

Exceptionally and truly rare early Campagnolo Super Record headset! This version showed up on high level bikes in the early to mid 1970's (roughly 1973 to 1976?), and were very expensive. As such, apparently not many were made. One of the more rare...

1975 Campagnolo Super Record Rear Derailleur 1st Gen: #4001 (Near Mint+)

Super rare first generation Campy SR rear derailleur! These were introduced in 1973/1974 as an upgrade to the Nuovo Record. They were essentially the NR with black anodized alloy pivots, titanium pivot bolts, and Super Record on the faceplate.  They...

Campagnolo C-Record Brake Levers: 4th Gen 1992/1993 - Aero (EXC)

Last generation of Record brake levers, identified easily via the small round hole at the top of the blades. Condition Excellent used condition overall, with a light to scuffing to the top faces of lever blades. Otherwise quite clean. Hoods are near...

Campagnolo 1st Gen C-Record / Cobalto Brake Levers: 1983-1985 (EXC)

These levers were issued with both the first generation C-Record group, and the Super Record Cobalto brakeset.  They were made from 1983 to 1986.  They are identifiable as 1st gen via the white hoods with ribbed top, the lack of a quick...

NOS Campagnolo 1st Gen C-Record / Cobalto Brake Levers: White Hoods - 1983-1985 (Take-Off)

These levers were issued with both the first generation C-Record group, and the Super Record Cobalto brakeset.  They were made from 1983 to 1986.  They are identifiable as 1st gen via the white hoods with ribbed top, the lack of a quick...

Campagnolo C-Record 1st Gen Downtube Shifters: Pure Friction - #0118074

This is a 1st gen C-Record friction downtube shifter set.  They were issued from 1983 to 1985, and in 1986 they started making retrofriction and then Syncro indexed shifters. Condition Overall excellent or better lightly used shape.  Screws...

Campagnolo C-Record Syncro II Downtube Shifters: 6s Indexed/Friction (MINT)

C-Record Syncro 2 rear shifter, with friction front shifter.  These come with a yellow insert, which indexes 6 speed rear derailleurs. The rear shifter can switch to pure friction mode by pulling the knurled knob outward and twisting...

Campagnolo Record Syncro 8 Speed Downtube Shifters: SL-01RE CG (MINT Barely Used)

These are the final version of Campy's downtube shifters.  These are Record (NOT C-Record), made from 1992-1994.  They have a micro-adjust knob on the rear shifter for indexing adjustment.  These are considered the best shifting of the...

Campagnolo C-Record A022 Front Derailleur: Braze On - 2nd Gen 1984-1991 (Near Mint+ Low Miles)

This 2nd gen FD was made from late 1984 to 1991.  It is easily identified as 2nd gen by the flat cage plates (1992+ 3rd gen FD had a bent inner plate for better indexed shifting), mount bolt in the middle of the body (1st gen was at very bottom),...

Campagnolo C-Record R010 Rear Derailleur: 1990-1991 - Last Gen (Near MINT+ Low Miles)

This is the last generation of the C-Record rear mech, before they dropped the C and the gruppo became simply Record.  This model is most easily identified via 1) both pivot bolts visible and upper is higher than lower (1989 A010 & before had...

NOS Campagnolo C-Record SGR Cleats: Original Production (Pair)

Rare set of fresh cleats for SGR-1 pedals! These revolutionary C-Record clipless pedals are the perfect choice for 1980's vintage road bikes, and they look awesome on show bikes!  They were among the world's first production clipless pedals, and...

Campagnolo C-Record SGR-1 Delta Clipless Pedals: Cleats/Hardware (Near Mint+ Low Miles)

These revolutionary C-Record clipless pedals are the perfect choice for 1980's vintage road bikes, and they look awesome on show bikes!  They were among the world's first production clipless pedals, and had a few unique features such as float adjust...

Campagnolo Victory/Chorus Aero Pedals: #405/000 - Toe Clips (M/L) & Straps (Near Mint Perfect Bearings)

Cool aero pedals from the mid 80's, complete with it's original Campagnolo toe clips and white/blue striped nylon straps with INOX clamps.  These are IDENTICAL to Chorus & Athena aero pedals aside from these lacking the outer strap guides (by...

Campagnolo Record Superleggeri #1038/A Pista Pedals: Black Alloy Cages (Barely Used Near Mint+)

Produced from 1971 to 1985, the Record Superleggeri (SL) pedals were between Nuovo Record and Super Record on the hierarchy.   The N/R pedals had silver steel cages.  The SL pedals had the lighter black anodized aluminum cages, but still the...

NIB/NOS Campagnolo Nuovo Record #1037 Strada Pedals: Chrome - Toe Clip Bolts

Produced from 1969 to 1987, these NR pedals are all shiny chrome vs the black alloy Record SL pedals. Condition: New old stock in retail box!  These are essentially pristine and untouched, with perfect bearings.   Details: 9/16"

NIB/NOS EARLY Campagnolo Record Pedals w/ Strap Loop: #1037 (1950's 1960's)

The elusive early model Record pedals with toe strap loops, in all their chromed glory.  These are pretty tough to find, especially in nice shape.   And boy are these nice.  These were originally released 1958, and lost their loop straps...

NIB/NOS Campagnolo Record Superleggeri #1038/A Pista Pedals: Black - Toe Clip Bolts - Track

Produced from 1971 to 1985, the Record Superleggeri (SL) pedals were between Nuovo Record and Super Record on the hierarchy.   The N/R pedals had silver steel cages.  The SL pedals had the lighter black anodized cages, but still the durable...

NIB/NOS Campagnolo FH-SC015 9/10/11/12 Speed Freehub Body: Standard Axle 12mm

This freehub body is for Campy hubs with standard 12mm axles. Condition New in box Details Fits: Standard axle Campagnolo Centaur. Veloce, Khamsin, Vento, Scirocco, Fulcrum Racing 5, Fulcrum Racing 7 FH-BU015 and FH-SC015 are identical and...

Cinelli Unicanitor MOD 50 Uncovered Plastic Saddle: 1960's - Old Cinelli Logo

Before the legendary Cinelli Unica-Nitor saddle was released in the 1960's, all saddles were either Brooks style solid leather, or plastic junk.  The Unicantor was the first to have a plastic shell, (some) covered with a bit of padding and leather...