DIA-COMPE SS-7 Short Stop Cantilever Brake Levers: Black/Polished - 1980's / 1990's (Near Mint)

One of the more popular non-boutique canti brake levers from the 1990's.  All alloy construction, reach adjust screws.  They were often used with DIA COMPE 986, Suntour XC Pro, and XTR M900 brakes. Condition Near mint lightly used shape...

Bontrager Select Seatpost: 31.6mm - Zero Setback - Late 1990's / 2000's - Two Bolt (EXC+)

Hard to find post that was stock equipment on mid to high level road/mountain bikes circa late 1990's to early 2000's.  Specifically Trek branded bikes, but it was available aftermarket/OEM and came stock on other brands too.  Zero setback, two...

NOS Ritchey Logic Comp 1 1/8" Threaded Headset: Black - 1990's (No Crown Race)

Somewhat tough to find headset from Ritchey's lineup in the early to mid 1990's.  This was just below the WCS headset, and above the Logic headset.  It would have been found stock on Ritchey P-22 and P-23 models among others...

Paul Cross Lever: Right - 26.0mm - Inline/Interrupter (Near Mint+)

The Paul Cross Lever is designed to be run on it's on for on the tops road drop bar setup, or as an inline lever secondary to a standard road lever.  They work with both short and long pull brakes (v-brake, cantilever, mechanical disc)...

Paul Cross Lever: Left - Black/Silver - 31.8mm w/ 26.0mm Shim- Inline/Interrupter (Near Mint+)

The Paul Cross Lever is designed to be run on it's on for on the tops road drop bar setup, or as an inline lever secondary to a standard road lever.  They work with both short and long pull brakes (v-brake, cantilever, mechanical disc)...

Mafac Course 121 Competition Half Hood Racing Brake Levers: Polished (Near Mint+, Dry Hoods)

This are the half-hood Mafac professional racing Course 121 levers from the 1960's, 1970's, and into the 1980's.  This is the racing version identified by the small adjuster barrels, vs the competition with larger barrels.  This pair has been...

Shimano Dura Ace BL-7401 Brake Levers: Aero (One Near Mint+, One missing one clamp/hood)

One very clean aero brake lever and hood from the 7400 series with a bonus lever missing hood and clamp Condition The lever on the left of the photos is complete with a nice hood and clamp, and is near mint+ with only light marks.  The one on the...

WTB Laser V Titanium Saddle: Black Leather w/ Red Stitching - 1st Gen

1st generation of one of WTB's historically most popular saddles, in titanium rail format!  This early version features stitching that runs from the tip of the nose all the way to the rear where it meets the shell, on each side.  This gives it...

Lyotard REF 45 CA-N Quill Pedals: 9/16" - Black Alloy Cages (Near Mint)

Rare black anodized version of the Lyotard 45CA pedals in English thread!  These are from the late 1970's into early 1980's. Condition Near mint lightly used condition with relatively low miles. Buttery smooth perfect bearings.  Just about...

Mavic 305 SSC/Zap Headset: 1" Threaded - Silver/Black - Italian (EXC)

Rare and sought after Mavic headset from the SSC & Zap groupsets, produced 1989-1999.  This the road oriented version, whereas the 315 and 316 were marketed for mountain bikes (of course it works for both road and mtb).  It features a...

Shimano XT BL-M739 Brake Levers: Disc / V-Brake - Black/Silver

Solid set of XT brake levers, for v-brakes and mechanical disc brakes.  You will notice a big increase in power and modulation with these over most Avid and other stock brake levers.   Condition Clean, but average to very good used shape...

Dia-Compe Gran Compe GC-202 Non Aero Brake Levers: Tan Hoods - Barrel Adjusters (Almost New ~20 Miles))

Re-issue of some lovely classic cable routed brake levers from DIA-COMPE.  They are exact replicas of the originals.  Barrel adjusters have black o-rings.  This is the non drilled version Condition Just barely used. A few touches of dirt...

Suntour Cyclone LD-1600 Clamp Band Downtube Shifters: 1st Gen 1970's 1980's

These are 1st generation Cyclone shifters with a band clamp-on design.  Lovely polished and milled lever blades, knurled edge caps. Condition  Very good shape, some light wear Details Friction For use with any speed drivetrain (5, 6, 7,...

Shimano Ultegra BR-6600 Road Brake: Front (Mint LOW Miles)

This is the first Ultegra 10 speed group.  These brakes are ultra powerful with great modulation.  Original pads.   Condition: Mint with just enough miles to put a slight glaze on the pads. Will present as new Details: Reach: short...

Cane Creek SCR-5 Road Brake Levers: Aero - Black (Near Mint+ Low Miles)

Comfortable road brake levers for drop bars that mimic the feel of brifters.  Wide, chunky bodies compared to vintage road brake levers with flat-ish hood tops. Condition These are mint with the exception of a light scuff on the face of one lever...

Lyotard Berthet MB-23 Pedals: 9/16" English - L/XL Clips Christophe (EXC)

Lyotard's most popular pedal was named after Marcel Berthet, the three-time holder of the Hour Record.  The pedals were produced from the 1920s through the mid 80's with few variations.  They're popular with the randonneur crowd as well as...

Suntour XC Pro Pedals: WTB Grease Guard - PL-XP01 - Black

Some of the most popular platform pedals of the 1990's mountain bike world!  These feature the ingenious WTB "Grease Guard", which is a grease port that allows you to lubricate the inner bearings via a grease gun without taking the pedal apart...

Ritchey WCS Seatpost: 27.2mm - Black/Silver - Alloy Two Bolt

Top level Ritchey post circa early 2000's.  Alloy, with a two bolt clamp. Condition Average to very good shape. Shaft has light insertion marks up close to the bottom of the logos.  Logos look great. Clamp would look nice with a better clean...

Fi'zi:k Arione Titanio Saddle: Black / Suede - Wingflex Gills (Near Mint)

Much loved Fizik Arione from the early to mid 2000's, in ti rail format!  This earlier one had a suede strip down the center Condition near mint lightly used shape.  Overall the saddle is very clean and shows little miles, though the suede...

Bontrager Titec Titanium MTB Flat Handlebars: 1990's

These bars were all the rage in the 90's, and subsequentially these were found on many top end mountain bikes!  They can be used with either a 22.2mm BMX stem, or with shims for 25.4mm stems (Not included, but available readily for under...

Nitto RM-016N Moustache Handlebars: Heat Treated - 26.0mm (NEW)

Heat treated moustache bars for your road/touring/townie/commuter/bar bike.  Perfect way to convert a vintage road bike with downtube shifters to an upright commuter bike. Condition New in package Details Clamp: 26mm Width:...

Giant TCX Carbon Cyclocross Fork: Overdrive 2 - Disc - 700c - 15QR

This is a high end Giant carbon cx disc fork, from around 2014.  It uses the carbon Giant Overdrive 2 tapered steerer, which is 1 1/4" to 1 1/2". Condition Average used shape, with little marks showing easily on the white glossy paint throughout...

Giant Advanced Carbon Road Fork: Overdrive Steerer (227mm) - 700c - QR (EXC+)

This is a high end Giant carbon road fork, likely from a Defy or Avail but applicable for other Giant road frames.  It uses the Giant Overdrive 1 tapered steerer, which is 1 1/8" to 1 1/4". Condition Excellent to near mint lightly used shape...

NOS Reynolds Ouzo Pro Carbon Road Fork: 1" Carbon Steerer - 43mm Rake (Take-Off)

Harder to find 1" carbon on carbon fork!  This is the late 1990's to mid 2000's era version. This is known as a stiff and reliable fork with great vibration dampening functions.  Great for your high end race or endurance road bike. ...

Manitou Two (M2) Fork: 1" Threaded - Fresh Rebuild? (Near Mint)

Released in 1993, the Manitou 2 was the first of the Answer-Manitou forks to gain this colorful and playful graphics, a stark diversion from the grey and black monochrome of the M1 and earlier Bradbury forks.   Condition Near mint cosmetics,...

NOS Syncros Composite Carbon Fiber Seatpost: 27.2mm - Vintage 1990's - 159g (Take-Off)

Rare carbon version of the Syncros Pro Hardcore post, circa mid to late 1990's. Condition New old stock, though it was installed on a show bike for a short period. No signs of use.  There is a ring line where the post was clamped a few inches from...

Speedplay Zero Stainless Clipless Pedals: Blue (Buttery, R Average, L Near Mint )

The durability and value combined with the brilliant Zero pedal design make this one of our most popular offerings from Speedplay. The choice of many, many riders and staff alike, they offer a simple and proven design that is durable and reliable. Great...

Campagnolo Nuovo Record Brakeset: #2040 - Standard Reach - Nutted (Near Mint+ LOW MILES)

Standard reach and nutted Nuovo Record sidepull road brakes from the post CPSC era, 1978 to 1984+.  Domed qr levers, original adjusters.   Condition Near mint+ barely used, as clean as many "NOS take off" brakesets.  The one...

NOS Campagnolo Super Record / C-Record Grey Brake Housing & Ferrule Set: Lined - Front/Rear

Enough for a complete bicycle's brakes front and rear.  The housing is lined, indicating ~1984-1987 make for C-Record and late Super Record, but otherwise they're the same as earlier Nuovo Record/ Gran Sport <C> head cables...

Shimano XTR BR-M900 Cantilever Brakeset: No Pads/Bolts/Straddle (EXC)

Some of the most powerful, reliable, and simplest to set up cantilever brakes to come out of the 90's.  This is a set of 4 arms with springs, spring covers, and brake pad eyebolts. Condition Excellent used condition.  One decal is mint, other...

NOS SRP Titanium Shimano V-Brake Upgrade Kit: Deore/XT/XTR - Mounting Bolts/pad bolts/nuts/cable pinch/Spring Tension (Sold in Sets for One Brake)

Sleek ultralight upgrade kit for your Shimano Parallel Pull v-brakes. These were designed with the high end XTR BR-M950 / BR-M952, but will work with most other Shimano V-brakes and likely other brands.  To name a few, XT BR-M750, XT BR-M760,...

NIB/NOS Campagnolo C-Record Brake Lever Hood Plugs for Aero Routing: White (Pair)

These are the little rubber plugs that seal the non-aero routing cable holes in the tops of the hoods for 1980's and early 1990's Chorus/Athena/C-Record brake levers. Condition New old stock Details Pair

NOS Campagnolo Nuovo/Super Record Brake Bolt: Rear Nutted - Concave Spacers & Acorn Nuts

Fresh center mounting bolt with all hardware for your Campy brakes 1960's through 1980's! Condition New old stock, clean Details

NOS Avocet Racing 1 (R1) Saddle: Softer Leather (Buffalo?) Black w/ White Decals - 1980's 1990's

This saddle has a softer/smoother feeling leather than was usually found on the Racing models.  Still smooth leather and not suede, but very soft.  Is it buffalo leather? Buffalo leather was the premium leather Avocet offered on the Racing II...

NOS DIA-COMPE G-Series Road Side Pull Caliper REAR Brake: Silver w/ Red Washer

G-series caliper brake from the 1980's. This is essentially a Weinmann style brake for entry/mid level bikes Condition New old stock. Original pads supple. Super clean, slight shop wear Details Rear brake only Nutted Silver Stamps: 5588, 0183

NOS Universal 51 Brakeset + Levers: 1960's Short/Long Reach - Supple Gum Hoods

These Italian brakes were popular stock models on racing bikes from the 1950's through the 1960's and into the early 1970's.  It features a long reach brake for the rear and a front reach on the front, which was a common setup on earlier Italian...

Campagnolo PD-RE021 Pro-Fit Fixed Cleats: Record / Chorus (New)

OEM cleats for your Campy Pro-Fit pedals Condition New in sealed box Details Pair

1990's Rockshox Judy XC Fork: 1 1/8" Threadless - 26" - Champagne/Gold a(EXC)

Very nice suspension fork from 1995 and 1996. Great for your retro mtb restoration, or as an inexpensive alternative to today's low end garbage forks on your backup/beater mountain bike.  It's even lighter than a Fox F100 or Float, at under 3...

MSK / CKC FUBAR Fit-A Sports Track Toe Straps: Double Leather Straps

These appear to be the exact same design as the MKS Fit-A-Sports double track straps, just with a different logo and smooth leather vs suede Condition Near mint ++ Barely used, just a few tiny marks.   Details pair Dark brown

CKC FUBAR Double Twin Toe Clips: Large - Bronze Gold (Near New)

These are some lovely bronze/brass/gold toe clips designed for double leather straps.   Condition Near mint ++ Barely used, just a few tiny marks.   Details Size large

Wolf Tooth Compression Plug w/ Integrated Spacer Stem Cap: Black (Drilled For Dynamo Light/Charger)

This plug has been drilled to allow a dynamo setup to pass through, for a charger wire to run through it. There is a small hole in the top cap, and a side cut out of the plug for the wire to pass through.   The Wolf Tooth Compression Plug...

Tektro CR710 Cantilever Brake: CX/MTB/Touring - Black (NEW Take Off)

Highly rated and affordable canti brakeset from Tektro.  Complete with the Tri-Dangle style cable carriers, straddle cables, bolts. Condition New, removed from a new bike after just a test ride or two. Details One pair (enough for one wheel,...

Tektro CR720 Wide Profile Cantilever Brake: CX & Touring - Silver (NEW Take Off)

Highly rated and affordable canti brakeset from Tektro, for your cyclocross, randonneur, or touring bike.  These 720 brakes are upgrades from practically any cantilever brake, save high end stuff like Paul Neo-Retro or TRP EuroX.  Complete with...

Tektro CR720 Wide Profile Cantilever Brake: CX & Touring - Silver (NEW)

Highly rated and affordable canti brakeset from Tektro, for your cyclocross, randonneur, or touring bike.  These 720 brakes are upgrades from practically any cantilever brake, save high end stuff like Paul Neo-Retro or TRP EuroX.  Complete with...

Shimano Dura Ace EX / AX Toe Straps: Blue Nylon (Near Mint)

These straps came with the Dura Ace EX PD-7200, Dura Ace AX PD-7300, Dura Ace PD-7400, and 600 EX / PD-6400. Condition Near mint very lightly used shape. No real wear, but some grease stains (likely from shop wear more than riding) Details Pair

Dura Ace EX PD-7200 + AX PD-7300 Dyna Drive Pedal LOT: 5 Pairs - Large Clips/Straps

Bulk lot consisting of five pairs of Dura Ace Dyna Drive pedals, complete with large/medium toe clips + cleats. Most of these are rideable, with the only issue being a few loose/tight bearings (can be adjusted). DD pedals feature oversized pedal...

Dura Ace AX PD-7300 Dyna Drive Pedals: Large Clips/Straps (Mint 50 Miles)

Complete and barely used example of the infamous Dura Ace Dyna Drive pedals complete with size large toe clips and mounting hardware.  This is the later 7300 AX version.  The main difference between these and the earlier pd-7200 EX version is...

Shimano 600 / Dura Ace Aero Toe Clips: XL - 7200/7300/7400/6400/A550 - 3 Bolt (Near Mint+)

These toe clips fit all the aero Shimano pedals including Dura Ace, 600, and 105 aero toe clips that require a three bolt clip. Condition Near mint or better lightly used shape. There's a scrape on an edge of one pedal loop tip, and microscratching...