Vintage Campagnolo Parts

Vintage Barrel Adjuster O-Rings: Green - Campagnolo / Suntour / Dura Ace (Sold in Pairs)

Did your Campy brake's barrel adjuster o-rings dry rot into oblivion?  These are your solution! These are a forest green, or perhaps more accurately British Racing Green. Condition Brand new.   Details Color: Green Compatibility includes (but...

Vintage Barrel Adjuster O-Rings: Red - Campagnolo / Suntour / Dura Ace (Sold in Pairs)

Did your Campy brake's barrel adjuster o-rings dry rot into oblivion?  These are your solution! These red ones are a VERY close match for Suntour Superbe Pro. Condition Brand new.   Details Color: Red Compatibility includes (but not limited...

Campagnolo Model Competition Record Brooks Seatpost Clamp Parts: Ears & Rail Brackets (EXC+)

From 1958 to roughly 1961, Campagnolo made the Brooks Competition narrow railed version of their 2-bolt Record seatpost (model 1045).  Brooks (Brooks Campagnolo Modell), Ideale, and Unica made this saddle with narrow rails specifically for that...

Campagnolo Record-D 10 Skeleton Differential Brakeset: Single / Dual Pivot - Black (MINT <20 Miles)

This is the black version of the Campy 10 speed "differential" brakes which matched a dual pivot front brake to a single pivot rear.  This was done because 70% of your braking power comes from the front, and you simply don't need that much braking...

Cobra Crown Race Remover: 1" + 1-1/8" - Vintage 1980's 1990's (Near Mint)

This tool is on par with the Campagnolo #729 crown race puller, but even more useful as it fits both 1" and 1 1/8". Plus, it's WAY more rare. These are invaluable when working with vintage steel bicycles.  They're one of the best ways to remove a...

Campagnolo Clone Derailleur Alignment Gauge Tool - Nearly Identical (EXC)

This is essentially a Campy "R" DAG tool without the Campagnolo branding and slightly different finishing touches. The handle to tighten the tool to the hanger has different end knobby bits, the long arm's end is a bit more of a pointy dome vs campy's...

Campagnolo "R" Derailleur Alignment Gauge Tool - #TL-1301001 (Near Mint)

Legendary Italian version of the Park Tool DAG.  Stands out visibly in the Campy tool box. Condition Near mint lightly used shape!  It has a nice light patina, and the screw spins nicely.  No damage, no rust. Details Model numbers...

Campagnolo Nuovo Record Three Hole Front Derailleur: 1052/NT - 25.4mm Clamp (EXC+ Low Miles)

Vintage 3 hole NR front mech from the 1980's, in clamp on format for your classic steel road bike.   Condition This derailleur is really clean, but has a chrome chip on the outer cage. Near mint otherwise with only light marks. Could be...

Campagnolo Nuovo Record Low Flange Hubset: 36H x 126mm - Curved QR - Front/Rear - BSA (Near Mint+ Perfect Bearings)

Curved blade quick releases.  Post-CSPS, made from 1978-1987.   Low flange NR/SR hubs are the gold standard training and racing hubs for classic road bicycles from the 1960's to late 1980's.  They are great looking, last forever,...

Campagnolo Nuovo Record Headset: 1960's 1970's Early Version - Strada 1039 - English (EXC+ Low Miles)

This is a tougher to find early version of the Nuovo Record headset. The locknut and crown race on the 1960's to mid 1970s headsets had smaller font and the locknut had long dashes between words.  In 1970 through the mid 70's the cups had <C>...

Campagnolo Super Record 4001 Rear Derailleur: Red Bullseye Pulleys - Pat 1984 (Near MINT+ Low Miles)

Exceptionally clean vintage Super Record rear mech, from the early 1980's.  The jockey wheels are nearly NOS Bullseye in red.  Classic road bicycle show worthy!  Condition Very close to MINT, show bike worthy condition.  There are...

1st Gen Campagnolo Super Record Headset: 1973-1975 - Italian - #4041 Strada - Italian - Alloy (Near Mint, RARE)

Exceptionally and truly rare early Campagnolo Super Record headset! This version showed up on high level bikes in the early to mid 1970's (roughly 1973 to 1976?), and were very expensive. As such, apparently not many were made. One of the more rare...

Campagnolo 1st Gen C-Record / Cobalto Brake Levers: 1983-1985 (EXC)

These levers were issued with both the first generation C-Record group, and the Super Record Cobalto brakeset.  They were made from 1983 to 1986.  They are identifiable as 1st gen via the white hoods with ribbed top, the lack of a quick...

NOS Campagnolo 1st Gen C-Record / Cobalto Brake Levers: White Hoods - 1983-1985 (Take-Off)

These levers were issued with both the first generation C-Record group, and the Super Record Cobalto brakeset.  They were made from 1983 to 1986.  They are identifiable as 1st gen via the white hoods with ribbed top, the lack of a quick...

Campagnolo C-Record 1st Gen Downtube Shifters: Pure Friction - #0118074

This is a 1st gen C-Record friction downtube shifter set.  They were issued from 1983 to 1985, and in 1986 they started making retrofriction and then Syncro indexed shifters. Condition Overall excellent or better lightly used shape.  Screws...

Campagnolo C-Record Syncro II Downtube Shifters: 6s Indexed/Friction (MINT)

C-Record Syncro 2 rear shifter, with friction front shifter.  These come with a yellow insert, which indexes 6 speed rear derailleurs. The rear shifter can switch to pure friction mode by pulling the knurled knob outward and twisting...

Campagnolo Record Syncro 8 Speed Downtube Shifters: SL-01RE CG (MINT Barely Used)

These are the final version of Campy's downtube shifters.  These are Record (NOT C-Record), made from 1992-1994.  They have a micro-adjust knob on the rear shifter for indexing adjustment.  These are considered the best shifting of the...

Campagnolo C-Record A022 Front Derailleur: Braze On - 2nd Gen 1984-1991 (Near Mint+ Low Miles)

This 2nd gen FD was made from late 1984 to 1991.  It is easily identified as 2nd gen by the flat cage plates (1992+ 3rd gen FD had a bent inner plate for better indexed shifting), mount bolt in the middle of the body (1st gen was at very bottom),...

Campagnolo C-Record SGR-1 Delta Clipless Pedals: Cleats/Hardware (Near Mint+ Low Miles)

These revolutionary C-Record clipless pedals are the perfect choice for 1980's vintage road bikes, and they look awesome on show bikes!  They were among the world's first production clipless pedals, and had a few unique features such as float adjust...

NIB/NOS Campagnolo Nuovo Record #1037 Strada Pedals: Chrome - Toe Clip Bolts

Produced from 1969 to 1987, these NR pedals are all shiny chrome vs the black alloy Record SL pedals. Condition: New old stock in retail box!  These are essentially pristine and untouched, with perfect bearings.   Details: 9/16"

NIB/NOS EARLY Campagnolo Record Pedals w/ Strap Loop: #1037 (1950's 1960's)

The elusive early model Record pedals with toe strap loops, in all their chromed glory.  These are pretty tough to find, especially in nice shape.   And boy are these nice.  These were originally released 1958, and lost their loop straps...

NIB/NOS Campagnolo Record Superleggeri #1038/A Pista Pedals: Black - Toe Clip Bolts - Track

Produced from 1971 to 1985, the Record Superleggeri (SL) pedals were between Nuovo Record and Super Record on the hierarchy.   The N/R pedals had silver steel cages.  The SL pedals had the lighter black anodized cages, but still the durable...

Campagnolo Freewheel Tool: "I Handle" + #704 Reducer Bit For 14t (EXC)

Earlier steel I handle and 704 freewheel tool for 14t cog freewheels. Condition Excellent used shape, some patina. Details Steel handle 704 bit for 14 & 15 tooth small cog freewheels   

Campagnolo "R" Derailleur Alignment Gauge Tool - Part # IT-VS030 (EXC)

Legendary Italian version of the Park Tool DAG.  Stands out visibly in the Campy tool box. Condition Excellent used shape!  It has a nice light patina, and the screw spins nicely.  No damage, no rust. Details Model: R,...

NIB/NOS Campagnolo Nuovo Record #1046/A Bottom Bracket: 114.5mm X 68mm English (Take off)

BB for 1977-1987 Nuovo Record Strada crankset, at 114.5mm long English threads.  Rifled thick cups.  The spindle is a world logo.   Condition New old stock, take off.  It was installed on a show bike, and then removed before...

1st Gen Campagnolo " No Record" Nuovo Record Strada High Flange REAR Hub: 36H x 126mm (EXC Perfect Bearings)

This is a first generation "Nuovo" Record rear hub! It was made from 1960 to 1963, and is just like the later and more common NR hubs, but lacks the word "RECORD" under the Campy "World" logo.  These are quite rare, and a must if you have an Italian...

NOS Zeus Criterium Return Spring: Ref. 52105.00

Fresh return springs for the Zeus Criterium rear derailleur! Condition New old stock Details  

NOS Zeus 2000 Return Spring: Ref. 52005.00

Fresh return springs for the legendary Zeus 2000 rear derailleur! Condition New old stock Details  

NOS(?) Zeus 2000 Titanox Lower Knuckle: Black Ano - Ref. 52008.00

Lower knuckle body piece for the legendary Zeus 2000 rear derailleur! Condition Appears new old stock, slightest  shop wear Details Black anodized

NOS(?) Zeus 2000 Titanox Upper Knuckle: Black Ano - Ref. 52002.00

Upper knuckle body piece for the legendary Zeus 2000 rear derailleur! Condition Appears new old stock Details Black anodized

Zeus Rear Derailleur Lower Pivot Bolt: 2000 / Criterium (used)

I THINK this is for the 1st generation Zeus 2000 and Criterium derailleurs, but I can't positively ID it via catalogs. Enjoy the low price if you think it'll work for you! Condition Great used shape Details Steel

NOS Zeus Rear Derailleur Upper Pivot Bolt: 2000 / Criterium

I THINK this is for the 1st generation Zeus 2000 and Criterium derailleurs, but I can't positively ID it via catalogs. Enjoy the low price if you think it'll work for you! Condition New old stock, no package Details Steel

NOS Zeus Rear Derailleur Upper Pivot Bolt: 2000 / Criterium?

I THINK this is for the 1st generation Zeus 2000 and Criterium derailleurs, but I can't positively ID it via catalogs. Enjoy the low price if you think it'll work for you! Condition New old stock, no package Details Steel

NOS Zeus Supercronos Rear Derailleur Lower Pivot Bolt

Original lower pivot bolt from the Supercronos rd Condition New old stock, no package Details Steel

NOS Zeus Supercronos Rear Derailleur Upper Pivot Bolt

Original upper pivot bolt from the Supercronos rd Condition New old stock, no package Details Steel

NOS Zeus 2000 & Criterium Rear Derailleur Lower Pivot Bolt: Ref. 52106.00

Original lower pivot bolt from the 1st generation Zeus 2000 and later generation Zeus Criterium rd, part number ref. 22100.00 Condition New old stock, no package Details  Part number: 52106.00 Steel

NOS Zeus 2000 Titanox Rear Derailleur Lower Pivot Bolt

Super rare original lower pivot bolt from the legendary Zeus 2000 Titanox #22000.00 (and steel?) rear derailleur. Unlike the titanium upper bolt, the lower bolt was chrome steel. Condition New old stock, no package Details  Part number: 52006...

NOS Zeus 2000 Titanox / Campagnolo Record Steel Rear Derailleur Upper Pivot Bolt

Super rare original upper pivot / mounting bolt from the legendary Zeus 2000 Titanox #22000.00 (and steel?) rear derailleur. It is also a killer upgrade for the 1st generation Campagnolo Record #1020 chromed bronze rear derailleur! It fits PERFECTLY (see...

NOS Bottle Cage / Fender / Rack Bolts: Thin Hex Head - Chrome - 5m (Pair)

Hard to source steel hex head bolts for your water bottle cages, mudguard & rack attachment to eyelets, extra long toe clip bolts, or a variety of other uses that take M5 bolts.  Great for your L'Eroica bikes or vintage road bike restoration...

NOS Zeus Bottle Cage / Fender / Rack Bolts: Chrome Hex Head - 5m (Pair)

Hard to source steel hex head bolts for your water bottle cages, mudguard & rack attachment to eyelets, extra long toe clip bolts, or a variety of other uses that take M5 bolts.  Great for your L'Eroica bikes or vintage road bike restoration...

NOS Zeus Toe Clip / Cable Cinch Bolts: Chrome Hex Head - 9mm Shaft (Pair)

Chromed hex head bolts for toe clips, derailleur cable bolts, etc. Condition New old stock Details Pair Chrome steel Shaft length: 9mm  

NOS Zeus Jockey Wheel Bolts SET: 2000 / Supercronos / Criterium / Gran Sport / Alfa / New Racer / Cosmos

Fresh Zeus rear derailleur pulley bolts! Hex head. Condition New old stock, no package. Details Pair Chrome steel  

NIB/NOS Zeus New Racer Rear Derailleur: No Pulleys

Mostly complete New Racer RD, the version with metal knuckles. Missing jockey wheels/bolts. Condition I believe this is new old stock in retail bag with some shop wear, though a few of the pieces such as the inner plate look like they could have been...

Zeus Supercronos Rear Derailleur Inner Parallelogram Plate

Inner derailleur parallelogram plate for the high end Zeus Supercronos RD. Condition Great used shape. No scrapes but light scratching throughout Details    

Zeus Supercronos Rear Derailleur Outer Parallelogram Plate

Outer derailleur parallelogram plate for the high end Zeus Supercronos RD. Condition Great used shape. Decals look great with minimal wear. No scrapes. Light scratching throughout Details    

NOS Zeus Jockey Wheels Pulleys Set: 10t - Later Model - 2000 / Supercronos / Criterium / Gran Sport / Alfa / New Racer / Cosmos

Fresh Zeus jockey wheels! These were used on practically all of their models for their entire run. These are a later version with the markings "Zeus-Patent Made in Spain". They are otherwise identical to their earlier ones with just "Zeus...

NOS Zeus Jockey Wheels Pulleys Set: 10t - 2000 / Supercronos / Criterium / Gran Sport / Alfa / New Racer / Cosmos

Fresh Zeus jockey wheels! These were used on practically all of their models for their entire run (though they subbed in these otherwise identical "Zeus-Patent" marked pulleys very late in their run). Condition New old stock, no package...

NIB/NOS Campagnolo Pawl / Spring Holder Tool: #7260223

One of the two tools needed to hold your pawls and springs in while installing on Campy freehub bodies.  This is needed for your C-Record and similar hubs. Condition New in package