French Bike Parts

NOS Mafac Guidonnet City/Touring Brake Levers: White Plastic Blades

Unique French city, townie, or touring brake levers from the 1960s and 1970's.  They're designed for French riser city bars, moustache bars, or flat bars. Condition New old stock! Bodies/clamps are close to pristine. Plastic covering on levers has...

NOS Mafac Racer Centerpull Brakeset: (1) Straddle Cable - Long Reach

Fresh set of Mafac Racer centerpull brakes from the 1970s and 1980s.  Condition New old stock, never installed. Some light shop wear. Note one caliper's straddle cable & anchor are missing. Details Reach: Long Reach (~50mm-75mm) Nutted Silver

NOS Mafac Racer Centerpull Brakeset: Straddle Cables - Long Reach

Fresh set of Mafac Racer centerpull brakes from the 1970s and 1980s.  Condition New old stock, never installed. Some light shop wear. Details Reach: Long Reach (~50mm-75mm) Nutted Silver

NOS Mafac Racer Centerpull Brakeset: Polished - Straddle Cables

Fresh set of Mafac Racer centerpull brakes from the 1970s and 1980s. These arms have been polished, and one of the caliper's pivot & stationary straddle cable anchor are polished too.  Condition New old stock, never installed. Some light shop...

NIB/NOS Cyclo Pans Freewheel Kit: 6 Speed 13-24t FW + 10 Cogs / Pawls / Springs / Tool / Oil

This is a 1980's freewheel kit from Cyclo.  It comes with a ready to ride 5 speed 14-21t freewheel, as well as 10 loose cogs (up to 24t) to customize your gear ratio.  It includes pawls, springs, and spacers.   Uses a 4 prong remover...

Kingsbridge Fixed Cup Tool: Universal Bottom Bracket Cup Remover - Works on Cups w/ Damaged Wrench Flats (RARE)

This is a very tough to find old shop tool used to remove stubborn or broken bottom bracket cups.  It works with practically all cup and cone square taper BB cups, as it is friction based and doesn't rely on the wrench flats.  The longer piece...

VAR 30 Bottom Bracket Fixed Cup Remover Tool: No Jaws

VAR's legendary French tool for removing the fixed cup of your bottom bracket. This one is known for not leaving marks on the cup, while making removal a cinch.  It is pretty tough to find, and sought after by mechanics who love vintage and antique...

VAR 30 Bottom Bracket Fixed Cup Remover Tool: 30/1 Jaw Campagnolo/ Shimano (Near Mint)

VAR's legendary French tool for removing the fixed cup of your bottom bracket. This one is known for not leaving marks on the cup, while making removal a cinch.  It includes VAR 30/1 jaw that fits Campagnolo, Shimano, Spidel, etc.  It is pretty...

Specialties TA Crank Puller / Extractor: 23mm

Original TA crank puller!  Tough to find.  Why use a modern 23mm extractor on your TA when you can get a TA? Condition Excellent used condition. Threads are very smooth. Details 23.0mm

Specialties TA REF. 24 Chainring Bolt Tool: 8mm T-Wrench For Hex Nuts (RARE!)

Excessively rare and useful key specifically for the older style domed Specialties T.A. chainring bolts (as well as other 8mm French chainring bolts). The special bit here is the wrench's opening is straight and untapered so it grabs the entirety of the...

Sachs-Huret Jubilee Rear Derailleur: Short Cage - Drilled - 1980s (Near Mint)

This is the final version of the Jubilee RD circa ~1985! Sachs acquired Huret in 1980 but the rebadge didn't happen until around 1985. It remained largely the same as the Huret drillium version but the badges on both sides became SACHS-HURET). This is...

Huret Jubilee Rear Derailleur: Short Cage - Non-Drilled (LOW MILES Near Mint+)

The Huret Jubilee was designed as the ultimate derailleur, to commemorate the French company's 50th anniversary.  It featured a drilled cage, adjustable ball bearing jockey wheels, and tiny hardware.  It weighed a scant 150 grams, and is...

NOS Mavic 860 Front Derailleur: 28.6mm Clamp - Black

The mid 1980's Mavic 860/862 derailleurs are the stuff of legend.  They work amazingly well, look great, and stand out from the crowd.  Highly sought after and fairly rare. Condition New old stock, no box. Very minor shop wear not worth...

Mavic 851 SSC Rear Derailleur: RARE Vintage 1980's Pro Version of 801 RD (EXC)

This mid 1980's derailleur was the peak of Mavic's rear mech technology in the SSC era.  It was the professional version of the similar 801 derailleur, the main differences being the 851's needle bearing jockey wheels (though this one has upgraded...

Gilles Berthoud GB-2886 Handlebar Bag: Large 12L (Near Mint)

This is GB's largest randonneur bag! The GB2886 is a upgraded version of the GB28 which uses elastic bungees to close all pockets. Includes the bag side of a decaleur. Condition Near mint lightly used shape with a few stains (shown well in photos). No...

Acorn Mini Handlebar Bag: Tan Waxed Canvas & Leather (Near Mint+)

This appears to be a discontinued model. Its similar to the Compact Handlebar Bag in size but a bit less deep. It has one front flap secured with a leather strap and a big zipper pouch beneath that. Great for keys/wallet/phone/snack and a few tools or...

Rivendell Brand V Holier Than Cow Grabsack Hip Pack / Shoulder Bag (LOW USE Near Mint++)

Brand V was Riv's vegan line of bags next to the non-vegan Sackville. The Grabsack is a versatile, classically styled everyday bag that works as a shoulder bag, a hip pack / fanny pack, and even as a pannier in a pinch. This has been discontinued for...

Vintage Kama Wool Beanie: Made in Czech Republic - Red / White - 1990's? (Near Mint)

Wool / acrylic beanie from Czeck company Kama. This gives vibes of Apres ski time in the lodge, chopping wood up in the mountains.  Condition Near mint to mint. Clean, no stains or odors. No significant wear to note. Details  

NOS/NIB Cateye Cello Bar Tape: Dark Blue - Smooth - End Plugs (Sold in Pairs)

This is Cateye's version of the cello tape that was prevalent on high end road bikes in the 1970s to mid 1980's. It is very similar to the famous Benotto tape, even the same tone of blue. These have nicer bar plugs than the rubber caps on the Benotto...

Quill Stem Bar Clamp Bolt + Nut: Drilled/Hollow! Chrome - 7.85mm x 38mm - Vintage 1940's 1950's 1960's

Gorgeous handlebar pinch bolt and nut for quill stems! Unknown make, but its really a step above most stock stem bolts aside from something like a Chater Lea. Its fully chromed and has a lightening hole drilled all the way through its center. The taper...

Zeus 2000 6 Speed Alloy Freewheel: 14-24t - French Thread (Near Mint+)

Rare French threaded aluminum Zeus 2000 freewheel!  This is a great alternative to the Regina Extra for your Campagnolo Nuovo/Super Record gruppo, French randonneur, or for any Zeus bike.   Condition Near mint or better with very few miles...

Ideale 90 TITANE Special Competition Saddle: Titanium Rails + Copper Rivets (Near Mint - Not Dry/cracking!)

This beauty may be the penultimate leather saddle of the classic era! Its the direct continuance of the idea behind the legendary French Constructeur era Ideale saddles flat duralumin alloy rails—take a popular performance saddle and put...

NIB/NOS Mavic 501 Hubset & QR Skewers: 28H x 130mm (Or 1276mm by removing spacers)

These are late 1980's to early 1990's hubs, which are a very slight refinement of the earlier 1980's 500 / 550RD hubs. They're also very similar to the 530 mtb hubs except those have a stiffer axle. They have a 130mm rear spacing, which smartly...

NIB/NOS CLB Nouve Aute Duralinox Autolubrifiees Brake Cables & Housing Set: 85g - Clear Rubber over Alloy Casing - Braided Cables - Front/Rear

High spec upgrade brake housing and cable set from France, circa 1980's. The whole setup weighs 85 grams! With the translucent covering, you can see the wound aluminum coil of the brake housing!  Condition New old stock in sealed retail...

NIB/NOS Tacx Toothless Jockey Wheels: Sealed Bearings - White - EARLY

Tacx is known for their rear derailleur pulleys today, but these toothless sealed bearing from the 1970's or 1980's are truly elusive! They were perhaps marketed as aftermarket upgrades for derailleurs such as the Campagnolo Gran Sport, Simplex Simplex...

VAR #13 Adjustable Pin Spanner for BB's & Headset: Brass Wingnut (Near Mint)

Nice adjustable pin spanner for bottom bracket adjustable cups/lockrings, headsets, dust caps, etc. It has pin holes for inward facing as well, to remove the 1940's / 1950's Bianchi and early Cinelli two pin headsets. The alternative is the uber rare and...

Huret Jubilee Group: Front & Rear Derailleurs + Cable Guides (Near Mint+)

Super clean examples of the legendary Huret Jubilee derailleurs and cable guides! Front derailleur is the four hole version was second gen, issued in 1977 and ran through the early/mid 1980's. The first gen was 1972-1976 and had a 5th hole at the far...

NIB/NOS T.A. Criterium REF #38 Cleats: Modele J. Anquetil - Nail On - Silver

These are for the old leather cycling shoes, and nail directly to the sole.  Great for display cases as well! Condition New in sealed factory packaging, with nails  

Velo Orange City Touring Brake Levers: 22.2mm (NEW)

These levers from VO are a modern version of brake levers such as the Mafac Ville VDA and CLB town bike brake levers. They fit 22.2mm handlebars, which is what most "flat" type bars are unless they're specifically designed for drop bar brake levers...

ENE Gran Compe DC-204QC Road Brake Levers: Non-Aero (NEW)

Tough to find brake levers with quick access ports at the top of the levers to make changing brake cables easier. Condition New in package Details Non-aero  Brown hoods Ferrules

Mavic Helium SUP Tubular Wheelset: Red! 26/28H - Shimano 8/9/10s - Vintage 1990's

The iconic Mavic Helium came out in 1995 or 1996, and was the company's first success into the pre-built wheel systems which mated a specific hub to a specific rim! They released the Cosmic a couple years earlier, which failed to catch on. There are some...

NIB/NOS Mavic 6702 Bearing Press: Vintage 1980's 1990's (RARE)

Super hard to find bearing press from the rare Mavic tool kit. Condition New old stock in sealed retail package

Specialties T.A. P4690so Orthopedic Pedal! RIGHT - French (RARE)

Uber rare "orthopaedic" Specialties TA pedal, for accessibility with difficulties like different leg lengths. The only difference here is the cage being taller to reach that shorter leg. Otherwise it is identical to a P4690 pistal pedal. This is perhaps...

NIB/NOS Specialties T.A. P4690 Pista Pedals: 9/16" BSA - Modern - Hard Anodized

This is the 1990's and 2000's modernized version of the classic Specialties TA P4690 track pedals. They are VERY similar to the vintage 1970's and 1980's verson.  The only real differences are the modern ones no longer came with a decal on the dust...

Specialties T.A. 4690 Route / Strada Pedals: 9/16" BSA - Modern (Cracked Body At Cap)

*Note the right pedal body is cracked from the dust cap being over tightened. The right pedal is considered for parts or display only. I do not recommend riding the right pedal. Bike Recyclery & it's owner assume zero liability for damages or injury...

Vintage Barrel Adjuster O-Rings: Green - Campagnolo / Suntour / Dura Ace (Sold in Pairs)

Did your Campy brake's barrel adjuster o-rings dry rot into oblivion?  These are your solution! These are a forest green, or perhaps more accurately British Racing Green. Condition Brand new.   Details Color: Green Compatibility includes (but...

Vintage Barrel Adjuster O-Rings: Red - Campagnolo / Suntour / Dura Ace (Sold in Pairs)

Did your Campy brake's barrel adjuster o-rings dry rot into oblivion?  These are your solution! These red ones are a VERY close match for Suntour Superbe Pro. Condition Brand new.   Details Color: Red Compatibility includes (but not limited...

Pre-War / 1950's Chrome Seat Binder Collar: 29mm - Center Line - 1930's 1940's 1950's 1960's (

Lovely earlier seatpost binder clamp.  Origins/make are unknown, but it came from a collection of 1930's to 1960's parts (primarily English and French but some Italian)   Condition Excellent or better lightly used shape. This looks a lot...

Belleri BF Track / Pista Drop Handlebars: 42cm x 25.0mm - 1960's 1970's - Alloy (Near Mint)

Rare track bars from Belleri (also spelled Belri) of St. Etienne, France circa 1960's and 1970's.  Oddly these have a slightly angular "dog leg" bend from the stem clamp reminiscent of the more pronounced angles of 1990's pista bars, while most from...

Waxwing Rackless Handlebar Bag: Medium - Analog Fifth Season Colors! (Near Mint)

This bag was custom ordered by a rider who also ordered a Fifth Season Key Pa saddle bag (we have it for sale!) and wanted a handlebar bag to match! The Rackless facilitates the convenience of a front bag without the need for a dedicated rack. This new...

Gilles Berthoud GB-587 Rear Rack Top Bag: Large 9L - Grey Canvas & Leather (Near Mint+ Barely Used)

Berthoud's large sized rear top rack bag.  Attaches on the rear rack with two leather toe clip straps (not included). Cover closed by zipper under flap.Holder on the rear for a tailligh. tMade with very strong water resistant cotton canvas...

Huret Jubilee Front Derailleur: 5-Hole - 28.6mm Clamp (EXC)

One of the lightest vintage front derailleurs out there, matched with some very angular lines that give it an almost industrial steampunk aesthetic.  Super smooth shifting! The four hole version was second gen, issued in 1977 and ran through the...

VAR 225 Bottom Bracket Fixed Cup Tightening C-Spanner Wrench (225/4)

This is part of a setup to tighten your BB's fixed cup. It works in tandem with a set of jaws to grip the cup and an adapter end piece (neither included) Condition Excellent used shape Details  Made in France

VAR 30/2 Fixed Cup Bottom Bracket Remover Jaw For Maillard + French

Stronglight version 30/3 bottom bracket fixed cup jaw adapter for the VAR 30 (and current version VAR BP-03000) & Hozan C-358 fixed cup tools. Note this tool is unmarked but identical to the VAR Condition Smaller side is near mint, larger side...

1" / 25.4mm Pilot Guide Fork Die Set: 40mm O.D.

One inch fork stock die pilot guide, unknown make Condition Excellent used shape Includes 1" / 25.4mm Outside diameter: 40mm

VAR Pilot Guide Set For 40/B Fork Die: 1" + 1 1/8" + 1 1/4"

Set of steer tube pilot guides for the VAR 40/D fork stock die. Condition Excellent used shape Includes 1" / 25.4mm 1 1/8" 1 1/4"

VAR 33/A Tension Nut For Fork Die & Crown Race Cutter: 1" / 25.4mm

This tension nut works for the #963 and 33 crown race cutters as well as the 40/B fork die mill. It will work with most any other brand's fork mill or die as well. Condition Near mint lightly used shape. Super smooth threads. Includes Model: #33 /...

HKC Hozan Fork Die: FRENCH M25 x 1.00 - Steerer Threading & Chasing (EXC)

Super hard to find French die for fork steerers! Invaluable tool for threading and chasing steerers!  Condition Excellent used shape.  Die appears sharp (untested, sharpness not guaranteed) Details M25x1.0", French Diameter: 55mm (match...