NOS Campagnolo 627/a Downtube Single Cable Guide Clip: Right/Rear Side - Bolt/Nut

Single sided clamp on downtube mounted cable guides for rear shift cable. Condition New old stock, mint. Details Chrome  

NIB/NOS Shimano Straddle Cable Carrier Yoke: Silver

Silver cable carrier, that were OEM equipment on many cantilever and centerpull brakes. Condition New old stock in bag w/ hardware Details silver

Huret Top Tube Cable Clips: Chrome w/ Cutout - Set of 3

Full set of standard 1" top tube clips for your French road bike.  These have a cool round cutout showing the cable at the top. Condition Average used shape.  Cosmetic marks throughout, though no rust except a tiny bit of it on one screw head

NOS Campagnolo #626 Downtube Tubular Cable Guide & Stop Clip: 1950s/1960's - Bolt/Nut - RARE

This is a very rare #626 downtube mounted cable guide from the 1950's to very early 1960's.  This generation features the distinctive round tube as the guide, instead of the upside-down "V" shaped guide the common 60's to 1980's ones have.  If...

NIB/NOS Early Campagnolo Top Tube Cable Clips: #649 - 1950's / 1960's - Chrome - Set of Three

This is a rare set of mid 1950's to early 1960's top tube clips in era-correct bag!  These are made of steel, and are closed "C".  These have the nut on the right side, when looking at the logo.  In 1962-1963, they flipped the nut to the...

Campagnolo #631 Seat Tube Cable Guide Tube & Stop Clip w/ Pump Rest: Tubular! 1950's / 1960's / 1970's - Bolt/Nut (Near Mint)

This is a very rare #631 seat tube mounted cable guide available from the 1950's (Earliest Catalog #12 1953) through 1970's.  The #630 alternatively, was for the downtube and only had one pump arm vs the 631's two angled ones.  This generation...

SIMPLEX Dual Tunnel Cable Guide Ref. 3594 L (EXC+)

Dual downtube shift cable guide.  This straight band clamp with the Simplex moniker was used in the 1970's and 1980's.  The earlier 1960's version had a pointed band with the S logo. Condition Excellent to near mint lightly used shape...

Suntour WL-120 Derailleur Cable Guide: DT Clamp Under BB Shell Mount - No Bolt (Near Mint_)

This hard to find double cable guide clamps on a standard 1 1/8" downtube and places cable guides under the bottom bracket shell for both front and rear derailleurs Condition Almost mint with very few imperfections.  Missing it's clamp bolt...

himano Dura Ace STI Cable Stops for Downtube Braze On: SM-ST74 Concave (pair - NEW)

These adapters bolt onto your vintage bike's downtube shifter mounts, and act as cable stops for STI, Ergo, and bar end shifters.  This is the version with housings that are curved (concave) to fit around your frame's downtube.  Includes...

Campagnolo #629 Downtube Cable Stop: Single Sided! For Bar End Shifters (Near Mint+)

This cable stop is for running barcon shifters on frames without downtube braze on shifter mounts.  These came from the factory with stops on both sides, but this one has been modified to only have a stop on the driveside.  This is a clean...

1950's Campagnolo 626 Downtube Cable Guide & Stop Clip: Tubular! Bolt/Nut - RARE

This is a very rare #626 downtube mounted cable guide from the 1950's to very early 1960's.  This generation features the distinctive round tube as the guide, instead of the upside-down "V" shaped guide the common 60's to 1980's ones have.  If...

Shimano Ultegra ST-6700 & 105 ST-5700 Lever Reach Reducing Blocks For Small Hands + Bottom Bracket Cable Guide SM-SP17

This lil bag comes in the box with Ultegra ST-6700 & 105 ST-5700 STI shifters. It includes a pair of 10mm lever reach adjusting blocks and a purple resin BB shell cable guide with rivet.  These blocks are great for those that have smaller hands,...

Shimano Dura Ace Downtube Cable Right/Rear Stop: STI + Bar End Barrel Adjuster: SM-CT74 - FLAT - Bolt (Single, New)

This adapter bolts onto your vintage bike's downtube braze on mounts, and act as cable stops for STI, Ergo, and bar end shifters.  This is the version with housings that are flat, to fit your alloy and carbon frames.  Includes stainless steel...

NIB/NOS Shimano Dura Ace Shifter Hardware Kit: Downtube Cable Stop STI Adapter Barrel Adjusters (SM-ST74) - BB Cable Guide (SM-SP17-M) - Ferrules

The adapters bolt onto your vintage bike's downtube shifter mounts, and act as cable stops for STI, Ergo, and bar end shifters.  This is the version with housings that are curved (concave) to fit around your frame's downtube.   This is...

NOS Shimano Downtube Shifter Braze On Adapter Clamp: 28.6mm - 600 Arabesque SL-6200

This downtube shifter clamp from the 1980's came stock on the 600 EX Arabesque SL-6200, with slight variations in the Dura Ace models.  This works on all standard 1 1/8" downtubes.  It is compatible with most shifters of both friction and...

NOS DIA COMPE / Weinmann Step Down Brake Lever Ferrules: Road / BMX / Flat Bar (Sold in Pairs)

These ferrules fit in the top of non-aero road brake levers, as well as for flat bar bmx and city brake levers.  They came with DIA COMPE, Gran COMPE, Gipiemme, Weinmann, and similar levers.  They work with most levers that don't have threaded...

Shimano SIS-SP40 Step Down Ferrule: 4mm I.D. Derailleur Housing to 4mm Cable Stop - Alloy - Sealed Type (Sold Individually)

This OEM Shimano cable stop is designed to fit standard/modern 4mm derailleur cable housing, and steps down to fit the common 4mm chainstay cable stop that's found on both modern frames and vintage Campagnolo-equipped frames.  These have oddly...

NIB/NOS Campagnolo #636 Chainstay Cable Housing Stop Clamp for Rear Derailleur: Chrome Steel - 5/8" Bolt/Nut (Many Available)

For those of you with frames lacking a braze on cable stop for your rear derailleur, this clamps onto your chainstay to provide one.  It fits the standard 5/8" chainstays that the vast majority of classic steel frames feature, and probably will...

NOS Campagnolo MTB Centaur / Euclid Headset-Mounted Canti Cable Stop Carrier: Grey - 1990

Quite scarce cable carrier that integrates into the Campy Euclid & Centaur mountain bike headsets from about 1989-1992. Condition New old stock, no package. Details Grey derlin

NOS SIMPLEX Demultiplicator + Cable Guide Ref. 3637 L: Dual Downtube Clamp

This gizmo is used (primarily) with friction bar end shifters to make the rear shifter less "sensitive" to input and easier to shift smoothly.  It changes the shift ratio to allow for bigger lever movements per shift.  The left side is a simple...

NOS Alloy Cable Stops: #A281 - 1990's MTB specific? Add an arm for seat pin mount? (pair)

These cable stops are a curiosity.  They strike me as a 1990's Cannondale thing, but I have not been able to identify what exactly they're for. Maybe you know? Condition New in OEM package Details pair