Modern Tools

DT Swiss Hub Tool Kit: HWTXXX00NTK00S (EXC)

DT tool kit for mostly ratchet type hubs and front hubs. This kit is complete except it doesn't have grease, the fabric strap, or two of the four bearing installation cylinders shown in the stock photo (last photo in this listing) and listed at the top...

Race Face Cinch Power Meter Crank Puller (Near mint)

Tool to remove Race Race Cinch powermeter cranksets Condition Near mint very lightly used shape.

INGRID Cassette Adapter Lock Tool (NEW)

Tool for  INGRID cassettes with long notches Condition New Details MSRP: $55

Bicycle Research SBP Sealed Bearing Press: American Bottom Brackets 3/4" + 20mm + 22mm

Rare press for installing sealed bearings in American style bottom brackets Condition Near mint used shape. Details Fits 3/4", 20mm, 22mm internal diameter

Bicycle Research SBRK Sealed Bearing Removal Kit: 10mm / 15mm / 17mm - MADE IN USA

Special sealed bearing extractor from Bicycle Research! This pulls the bearings out via tightening bolts and thus expanding collets, much more precise than the hammer type.  Works for all sealed bearings with a combination of 10mm, 15mm, 17mm...

Park Tool BBT-6 Cartridge Bottom Bracket Adjusting Tool: CS & LP Series (EXC)

Long out of production tool to adjust the bearing preload on 1990's and 2000's Shimano CS and LP series bottom brackets. These were entry level units that often came from the factory too tight. Scan of manual shown in photos. Condition Excellent...

Park Tool TW-5 Torque Wrench: Ratcheting Click-Type - 1/4" Drive (Barely Used)

With today’s lightweight components, torque wrench use in the shop is no longer an option — it’s a must for every mechanic. The TW-5 is a high quality, ratcheting, click-type torque wrench that accurately measures and applies the proper...

Park Tool TM-1 Spoke Tension Meter (NEW)

  A properly-tensioned wheel is stronger and stays true longer. The TM-1 Spoke Tension Meter is an essential tool for achieving that proper tension, and belongs on the workbench of anyone building or truing wheels, diagnosing wheel problems, or...

Park Tool Pedal Tap Set: 1/2" - TAP-3 LH & RH - Thread Cutter Chaser (NEW)

Reliable set of pedal taps for steel and alloy cranks. This is the size for BMX bikes, many old 3 speed cruisers and heavyweights, etc. Condition New. Details  1/2" x 20 TPI

Park Tool #607 Fork Die: 1 1/8" x 26 tpi - For FTS-1 (Near Mint)

Invaluable tool for threading and chasing 1 1/8" steerers! This is just about the only steer tube die on the current production market that you can readily find. Condition Near mint used shape.  Die appears sharp (untested, sharpness not...

Var 373 Crank Arm Straightener: RARE Bending Tool!

Rare yet simple tool for fixing bent cranks, both cottered and cotterless. Condition Great used condition.  

Park Tool HCS-1 Crank Arm Straightener: RARE Bending Tool!

Long out of production and absurdly rare to come by, but very useful tool.  This is used to bend steel cranks back into place. It was heavily used in the old school bmx world, as well as cruisers and heavyweights. Great for any steel crank, 1 piece...

Park Tool SS-1 Chainstay & Seatstay Straightener: RARE Frame Repair Tool!

Long out of production and absurdly rare to come by, but very useful tool.  This is used to bend stays back into place after frame damage. This could save a repair shop or frame builder some serious time and headache. Condition Great used...

Park Tool HTS-1 Head Tube Straightener: RARE Frame Repair Tool! (EXC)

Long out of production and absurdly rare to come by, but very useful tool.  This is used to bend the headtube back after a front end collision. This could save a repair shop or frame builder some serious time and headache or make your beloved steel...

Enduro Bayonet Handle Ends for BRT-005 Bearing Press (EXC)

Handle ends for your Enduro bearing press. Condition Excellent used shape. Details  

Enduro Bayonet Handle for BRT-005 Bearing Press (EXC)

End handle for your Enduro bearing press. Condition Excellent used shape. Details  

Park Tool TS-TA Thru Axle Adapter For Truing Stands: 12mm 15mm 20mm (NEW)

  This simple adapter installs onto any thru axle hub so the wheel can be used in any Park Tool truing stand.   Use of the included centering cones is not necessary when truing 12 mm hubs. When using the TS-TA to true 15 mm or 20 mm hubs,...

Park Tool RT-2 Headset Cup Remover: Oversized - 1 1/4" & 1 1.5" (EXC)

  The RT-2 makes headset bearing cup removal easy. The tool is pulled through the frame until the flared ends snap in behind the cup. The tool end is struck with a mallet and the flared ends evenly distribute force around the cup as the cup is...

Park Tool CRS-15 Oversize Crown Race Setting System: 1 1/4" & 1.5" (EXC)

The CRS-15 uses two different insert rings to install bearing races on the 1.5" and 1 1/4" forks. The bearing surface is spared a direct hit by using an aluminum inserts. Using a hammer, tap firmly on the end cap of the tube and seat the race into its...

Park Tool BTS-1 Bottom Bracket Tap & Handle Set: English #691/692 (Near Mint)

This set includes left and right taps with English/BSA threads, but does not have the #690 45 degree facer (that sells for $112 new on it's own) From the Manufacturer: The BTS-1 is a precision tool system which provides a piloted means of tapping the...

Park Tool DT-1 Disc Post Mount Brake Mount Facing Set (Near Mint+ Low Use)

  In order to ensure disc brakes function smoothly and accurately, the frame’s mounting tabs must be parallel with the brake pads and rotor. The DT-1 is designed to perfectly machine the face of each tab, removing paint and material to create...

Park Tool CCP-4 Crank Puller Tool For Splined BB: ISIS / Octalink

The CCP-4 is specifically designed to remove crank arms from Shimano® splined, oversized, "Pipe Billet" bottom bracket spindles and ISIS systems that do not use a "One Key Release" system. It uses a long handle and a fine thread for the leverage...

Campagnolo Grasso 10-N 500g Grease Tub: 3/4+ Full - 1980's C-Record Era - RARE!

This is arare 500 gram white jar of Campagnolo Grasso-10-N grease from the mid to late 1980's "C-Record era".  Even back in the day, this would have been so cost prohibitive that only pro bike shops that do a large quantity of Campy builds would...

NIB/NOS Campagnolo Grasso 10-N 1000g Grease Tub: Sealed! - 1980's C-Record Era - RARE!

This is an absurdly rare UNOPENED 1,000 gram white jar of Campagnolo Grasso-10-N grease from the mid to late 1980's.  Even back in the day, this would have been so cost prohibitive that only pro bike shops that do a large quantity of Campy builds...

ROTOR BSA30 Bottom Bracket Spanner Wrench

This is Rotor's external bearing bottom bracket wrench.  It is compatible with SRAM® DUB™, Zipp® Vuma™, Race Face® Cinch™, Rotor® BSA30, Hawk Racing™ BB3086™ From the...