NOS VINTAGE

NIB/NOS (Unica) Nitor Mod. 63 Seatpost: 27.2mm - Red Synthetic Friction Plates - 1960's / 1970's

The Nitor - Unica model 63 seatpost was released in 1963 and ran into the 70's.  It was a very expensive upgrade to the Campagnolo Nuovo Record 2-pin seatpost that was the gold standard of that era. These were only ever marked Nitor, which was...

NIB/NOS Weyless Hubset w/ QR Skewers: 36H - 1970's - Mirror Polish

Though these look like a product of the 1990's CNC era, these were actually made from 1974 to 1978 in the USA.  Great choice for Exxon Graftek, Teledyne Titan, Bruce Gordon, and other top shelf boutiquey USA made bikes of the era. They were designed...

NIB/NOS Suntour Superbe Pro Brakeset: CB-3600 - Short Reach - Nutted (Front & Rear)

These brakes were used for both the Superbe and Superbe Pro groups from about 1979 to 1986 with minimal changes. This is a later version indicated by the cone-shaped center nut where the earlier ones had acorn nuts. Made by DIA COMPE for Suntour, these...

NIB/NOS Suntour Superbe Pro Crankset: CW-SB10 - 172.5mm x 53/42t x 130mm - Dust Caps (Pristine)

This is an early version of the last gen Superbe Pro cranks that ran 1987-1994.  Until 1991, the arms had the SUNTOUR SUPERBE PRO logo in bold etching on the center flat of the arms.  Starting in 91, the logos moved to one of the side slants,...

NIB/NOS Shimano Dura Ace EX BL-7200 Brake Levers & Gum Hoods: Drilled - Vintage 1970s 1980s

Rare untouched set of EX levers with original tan gum hoods! The Dura Ace EX group ran concurrently with the wild aero 7300 Dura Ace AX series, circa ~1978 to 1984.  Condition New old stock in sealed retail package. Hoods feel great and show no...

NIB/NOS Shimano Dura Ace EX RD-7200 Rear Derailleur: Silver - Short Cage - Vintage 1970s 1980s

The Dura Ace EX group ran concurrently with the wild aero 7300 Dura Ace AX series, circa ~1978 to 1984. These were the last truly classically styled Dura Ace derailleurs before the somewhat modern 7400 took over. Includes EX decal and allen...

NIB/NOS Cinelli 1R OLD LOGO Quill Stem: FRENCH 22.0mm x120mm x 26.4mm - Ti Bolt - 1970's Early Version

Rare early version of Cinelli's top of the line quill, made even more scarce by being 22.0mm quill for French bikes.  French Cinelli stems are super easy to identify via a dimple above the top of the expander cone relief slots. It's also marked on...

NIB/NOS ICS Campagnolo Super Record Ti 1052/SR Front Derailleur: Chain Guide - Braze On - RARE!

This is an exceptionally rare 1985 Campy Super Record front derailleur that has been modified/improved by ICS (Ital Cicli Systems) to include a chain guide to prevent the chain from dropping off the inside of either big or small chainring.  This...

NIB/NOS Campagnolo Nuovo Record Brakeset + Levers: #2040/1 - Nutted - Standard Reach - Original Gum Hoods

Fresh NR/SR brakes have gotten really tough to source!  This set is post-1978 with domed QR levers, and has original gum hoods in supple mint shape. Condition New old stock in original tan box! They are very close to pristine, and perfectly clean...

NOS Suntour AP 6-Speed Freewheel: 13-21t - 4 Prong - Black/Gold - 1980's

The AP (Accushift Plus) was a technically mid to high level FW from the mid to late 1980's, and was one of the most durable in their lineup.  It uses the same 4 prong remover as the Winner Pro.  This along with the Alpha were designed to work...

NOS Shimano XT M780 Left / Front Shifter Base Cap

Replacement oem basecap for your front SL-M780 Condition New old stock Details Front 

NIB/NOS Shimano Dura Ace FC-7800 10sp Inner Chainring: 39t B - 130mm BCD

Inner ring from the 10 speed Dura Ace 7800 group.  130mm BCD fits standard road double 8/9/10 (and some 11) speed cranks of most brands. Condition New in sealed retail packaging Details BCD: 130mm 39 tooth

NIB/NOS Shimano XT SL-M740 Gear Indicator: Front/Left - Screws

Did your XT M740 8 speed shifter have a busted or ugly gear indicator window?  This is a rare offering of a new replacement indicator plate with screws!  This was the best of the XT 8 speed shifters, and is worth restoring.  The M740 was...

NIB/NOS Shimano XT ST-M739 Gear Indicator: Left/Rear - Screws

Impossible to source replacement gear indicator w/ screws for both SL-m739 shifter pods and ST-M739 combos. Condition New old stock in sealed OEM package.  Details Front / Left only

NOS Shimano XTR FD-M950 Front Derailleur: 28.6mm - Top Swing/Low Clamp (Slight Shop Wear)

Top shelf front mech for 8 and 9 speed drivetrains. Condition New old stock with slight shop wear Details Clamp: 28.6mm Top pull Top swing

NIB/NOS Shimano Deore XT HB-M775 Front Hub & QR Skewer: 32H - Centerlock - Silver

Centerlock front hub and quick release skewer from the last 9 speed XT group Condition New in box, never mounted. Slight shop dirt that I didn't try to clean off Details 32 hole Centerlock disc HB-M775S

NOS Scott Mathauser Superbrake Pad Inserts: Size "S" for Finned Holders (Sold in Pairs)

Set of four brake shoes, in size "S" to fit Mathauser finned Superbrake pad holders.   Condition New old stock. Pads are supple and not at all drying. Details Sold in pairs (for a whole bike front and rear, order quantity two) Salmon 

Shimano Deore XT II SL-M732 REAR Thumb Shifter: 7 Speed SIS / Friction (Near Mint+ Low Miles)

Clean XT thumbie! These last generation XT shifters ran from 1989 to 1992, and Shimano went Rapidfire shifter only in catalogs in 1993. These were likely issued for a year or two after 1992 for bikes that desired thumbies.   Condition Near...

Shimano Dura Ace RD-7900 Rear Derailleur: 10s - Grey (<100 Miles Near Mint ++)

Smooth shifting and wild aesthetics from the last 10 speed Dura Ace rear mech.  Its weird to see the original H.R. Geiger Alien styled derailleur become "outdated" and affordable, but this is where we are in the world.   Condition Near...

NOS Campagnolo FC-RA002 Crank Bolts: Square Taper - 8/9/10s (Pair)

Crank bolts from the 8 speed, 9 speed and 10 speed era of the mid 1990's to early 2000's. Includes washers. Condition New old stock, pristine. Never installed  

NOS Shimano Brake Lever Rubber Dust Boots / Hoods (Pair)

These rubber covers came stock on 3 and 4 finger brake levers from the early to mid 1980's.  Condition New old stock, no package. Supple Details One pair (two boots)

NIB/NOS Shimano XTR CN-IG90 Chain: 7/8 Speed -116L - M900 + M950 + Dura Ace 7400

This chain was part of the 1st Generation XTR M900 group and later M950 group as well as the Dura Ace 7400 series, and was the top chain available in the early 1990's.  It was often an upgrade to M737 and M739 groups, or Dura Ace / 600 on the road...

NOS Campagnolo Montreal 76 Clincher Rims: PAIR - 700c x 36H - Late 1990's - Silver -1st Version - RARE

Quite rare set of Campy Montreal 76 rims. These were part of a 1996-1999 series of rims commemorating The Olympics & their cities. This set is the first version Montreal 76, from 1998 only. They are deep box section, with a satin finish and...

NOS Mavic G.L. 330 Tubular Rims: PAIR - 36H x 28" - Hard Ano Grey - Vintage 1970's 1980's

The GL330 was Mavic's all conditions racing / training tubular rim in the 1970's and 1980's.  They weigh 330 grams,  was situated between the amateur GP 4 at 395g and the ultralight race only GEL 280 at (you guessed it) 280g. Condition New...

NIB/NOS Suntour Barcon Rubber Lever Covers: #1246 (Sold In Pairs)

Restore your classic retrofriction bar end shifters to their former glory with minty fresh lever blade covers! These are made for the Suntour 3090 shifters, as well as the Suntour shifters rebranded as Raleigh, Schwinn Approved, etc. They'll probably...

NIB/NOS DIA-COMPE 2001 Straddle Cable Carrier/Hangers: Pink Ano - DC 988 / 990 (PAIR)

These unique straddle cable carriers came stock on high end MTB/BMX cantilever and U-brakes in the 1980's and 1990's, such as the 988 and 990. They're anodized a pretty violet pink color. They're great for wild colorful townies, cruisers, and 1990's...

NOS Shimano XT ST-M765 Dual Control 9 Speed Shifter / Hydraulic Disc Brake Set (Front Take-Off)

The Dual Control shifters were all the rage in the early 2000's, as Shimano brought essentially STI shifters from the road bike world to mountain bikes / hybrids.  Condition Rear is new in factory sealed inner plastic bag. Front is a new take-off...

NOS/NIB Benotto Professional Cello Bar Tape: Light Blue - Smooth - End Caps - Vintage 1970's 1980's

An old favorite for vintage road bikes!  This tape is thin, flexible, and does not get dirty! Benotto tape was introduced in about 1975 and ran through the mid 1980's and is a top choice for classic road bikes and L'Eroica rides.  This light...

NOS/NIB Benotto Professional Cello Bar Tape: Dark Blue - Smooth - End Caps - Vintage 1970's 1980's

An old favorite for vintage road bikes!  This tape is thin, flexible, and does not get dirty! Benotto tape was introduced in about 1975 and ran through the mid 1980's and is a top choice for classic road bikes and L'Eroica rides.  This dark...

Shimano Deore II / DX SL-MT62 Thumb Shifters: 7 Speed (Barely Used Near MINT+++)

Smooth shifting and attractive 5/6/7 speed shifter from 1989 to 1993.  In 1989, they were listed as Deore II and in 1990 the same MT62 model became Deore DX. Very similar to the XT SL-M732, just with a different mounting bracket Condition Very...

NIB/NOS Shimano Bar End Shifter Body & Fixing Bolt Plug Set: Front/Rear - 8/9/10s - Dura Ace SL-BS77 / SL-BS78 / Ultegra SL-BS64

Do you have a working set of Shimano 8s, 9s, or 10s bar end shifters but you've scraped up the outsides of the bodies? This is your quick and cheap fix! These original bodies with fixing bolts and expanders will bolt directly to you levers for all 8 and...

NOS Specialties TA 2-Pin Crank Dust Caps: Chrome - 22.81mm - Zephyr & Modern Production Pro 5 Vis

I believe these are modern production TA dust caps that came on the Zephyr crank and current production Pro 5 Vis. Measuring the outside diameter over the threads comes to 22.81mm. They're also shallower than most dust caps. If anyone can confirm my...

NOS Two-Pin Dust Caps: Deeper Than Most - Chrome Plated Plastic

2-pin dust caps that look very similar to XT FC-M730 caps, but are a lot deeper front to back. Unsure who made these or why they're so deep. Condition New old stock! Slightest hints of shop wear microscratching Details Pair

NOS Two-Pin Dust Caps: Chrome Plated Plastic

2-pin dust caps that look very similar to XT FC-M730 caps. Condition New old stock! Slightest hints of shop wear microscratching Details Pair

NOS Shimano XT FC-M730 / FC-M730 Dust Caps: 2 Pin - Chrome Plated Plastic

Clean caps for your 1980's Shimano XT cranks! These cosmetically look the same as XTR FC-M900 1st gen cranks, and look great on Dura Ace 7400/7402 cranks, as they use the two-pin style too. Condition New old stock! Slightest hints of shop wear...

NOS Specialties TA Crank Dust Caps: Chrome - Vintage Pro 5 Vis Cyclotouriste (Sold in Pairs)

Original chrome dust covers from TA Pro 5 Vis Cyclotourist and other vintage cranks. Condition New old stock. Barely a hint of shop wear Details Pair Steel

NOS Specialized Dust Caps: Chrome - Flag Crank - 1980's / 1990's (pair)

These caps came the Specialized "Flag" crankset and many other models of the 1980's and early 1990's Condition True new old stock, never installed and slightest shop wear Details Chrome Fits standard cranks and square taper bottom brackets

NOS Suntour Superbe Pro Crank Dust Caps: Chrome - 1980's / 1990's - Cyclone - Sprint - XC Pro - BMX

These caps came on various high end Suntour cranks in the 1980's and early 90's, including Superbe, XC Comp / Pro, Cyclone, Sprint, BMX, etc. Condition True new old stock, never installed and pristine Details Chrome Fits standard cranks and square...

NOS Grafton Pedal Clipless Tension Elastomers: Set of 8 - Speedtrap / Speedlite - 3.38mm Thick Extra Firm?

These elastomers came to me in the bag with all my Grafton cleat/pedal parts and appear identical to the original SpeedTrap tension elastomers, just thicker. These measure 3.38mm thick. Is this just an extra firm version? Condition New old stock,...

NIB/NOS Grafton Pedal Cage Plate Bolts: Set of 8 - Speedtrap / Speedlite

Fresh set of original 1990's bolts to attach your cages to the bodies on all Grafton Speedtrap / Speedlite pedals. Condition New old stock in retail bag Details Set of 8 bolts (enough for two pedals)  

NOS Grafton SpeedTraps CLEATS! MTB / Road / Cross - Wrenches & Hardware

Fresh set of cleats for 1990's Grafton pedals! I believe these are complete, see photos. Condition New old stock. Small cleat screws are still in factory bag  

NOS Campagnolo Nuovo Record Tandem Crank Arm: Captain Driveside - 170mm - #1051 (Take-Off)

Non driveside orphan arm for the classic NR tandem crankset. The "D" stands for right thread pedals (D and S stand for "Destra" and "Sinestra" in Italian) and this one being without a spider makes it the captain's driveside arm. The arm does not...

NIB/NOS Shimano Deore XT BB-M730 Bottom Bracket (No Cups): 122.5mm Spindle + Bearings/Bolts/Washers/Accordian

Original XT BB, just missing the cups! This cup and cone bottom bracket ran from 1987 through 1993.  In 1994, they went to sealed cartridge units. Condition New in stock in retail package, never mounted Details length: 122.5mm JIS

NOS Vitus 979 / 992 Seatstay Cap Ear / Slug: For Right or Left (Sold Individually)

OEM replacement seatstay caps for the legendary Vitus 979 and 992 bonded frames from the 1970's, 1980's, and 1990's! These were sometimes called ears, sometimes slugs.  They work for both right and left sides. if you need a pair, order two of these...

NOS Vitus 979 / 992 Seatstay Brake Bridge: "B"

OEM replacement seatstay bridge for the legendary Vitus 979 and 992 bonded frames from the 1970's, 1980's, and 1990's! Condition New old stock, slight shop wear Details Stamped: B

NOS Vitus 979 Non-Driveside Dropout: 58cm / 60cm

OEM replacement dropout for the legendary Vitus 979 bonded frames from the 1970's, 1980's, and 1990's! These likely fit other Vitus / Alan models as well as bikes marketed by other brands using Vitus frame parts. They had different dropouts for specific...

NOS Vitus 979 Non-Driveside Dropout: 55cm / 57cm

OEM replacement dropout for the legendary Vitus 979 bonded frames from the 1970's, 1980's, and 1990's! These likely fit other Vitus / Alan models as well as bikes marketed by other brands using Vitus frame parts. They had different dropouts for specific...

NOS Vitus 979 Non-Driveside Dropout: 52cm / 54cm

OEM replacement dropout for the legendary Vitus 979 bonded frames from the 1970's, 1980's, and 1990's! These likely fit other Vitus / Alan models as well as bikes marketed by other brands using Vitus frame parts. They had different dropouts for specific...