NIB/NOS Suntour XC Pro Headset: 1" Threaded - HS-HP01 - Grease Guard - Italian - Black

XC Pro is the best mountain bike group of the late 80's and early 90's, before XTR M900 took over the reign.  This model has Wilderness Trail Bike's (WTB) "Grease Guard", which are grease ports...

NOS Suntour GPX Seatpost: 26.6mm - SP-SU00-S - One Bolt - Silver

This GPS seatpost was made from about 1989 to 1991.  It uses the same clamp as the Suntour quill seatpost. Condition New old stock, though it was test fit on the bottom 3 inches of the post as...

NIB/NOS Suntour Superbe Pro NJS Seatpost: 27.2mm x 250mm - SP-SB00-L - Track/Keirin/Road - Polished

Rare high end track post that ran from 1987 to 1994. It's NJS-stamped and fully certified for Keirin racing in Japan.  It works just as well on the road as it does the track. It has a sultry...

NIB/NOS Suntour SP-XC00 XC 9000 / Pro Seatpost: 26.8mm x 300mm - Champagne Ano

This SP-XC00 post was occupied the top spot in Suntour's hierarchy as XC 9000 from 1987-1989, and continued albiet with a different decal as XC Pro from 1990-1995.  It was champagne anodized the...

NOS Suntour SP-XC00 XC 9000 / Pro Seatpost: 26.6mm x 300mm - Champagne (Shop Wear)

This SP-XC00 post was occupied the top spot in Suntour's hierarchy as XC 9000 from 1987-1989, and continued albiet with a different decal as XC Pro from 1990-1995.  It was champagne anodized the...

NOS Suntour XC Front Derailleur: 28.6mm - MTB Triple - Bottom Pull - Black

This late 1980's or early 1990's front mech looks similar to the XC Pro & XC 9000 models, but I'm unsure exactly which model it is. Condition  New old stock, no package Details 28.6mm...

NOS Suntour Superbe Pro BB-SB11 Bottom Bracket Spindle: 112mm - Square Taper

This 112mm spindle was from the late 1980's to early 1990's Superbe Pro group.  Condition New old stock, minor shop wear. Details  112mm 

NOS Suntour Superbe Pro HB-SB00 Hubset & Skewers: 32H x 126mm - Front/Rear (Take Off)

Tough to find 3rd gen late 1980's to early 1990's Superbe Pro hubset for your 126mm spacing classic road bikes. Highly polished finish and high quality bearings compliment the classy style...

Suntour Edge SL-4050 Downtube Shifters: Accushift - 6 Speed Indexed / Friction - Dark Grey (EXC+)

Mid level downtube shifters from the late 1980's or early 1990's.  These are one piece units, with built in shift plates.  The shift plates are a hybrid design, made to fit both steel...

Suntour Superbe RD-2100 Rear Derailleur: 1st Gen 1970's - Silver (Near Mint)

This Superbe rear mech was made from about 1977-1983.  It is the same body as the RD-3100 Superbe pro model, with slightly different hardware.   Condition Near mint lightly used...

Suntour GPX Mini Road Groupset: Crankset - Front/Rear Derailleurs - Brake Levers

Budget priced mid range road group from the late 1980's to early 1990's Condition Average to well used condition.  Wear throughout, though all components are in functional shape with no real...

NIB/NOS Suntour 888 5 Speed Downtube Shifter: Clamp on - Ratchet - 1970's

Clamp on downtube shifter for your 5 speed drivetrains.  Cable and white housing included. Condition New old stock in factory sealed retail package. Details Rear shifter only Part number:...

NIB/NOS Suntour Mighty Rear Thumb Shifter: 5sp Ratchet - Stingray Fastback + 1982 Stumpjumper - Excelsior Klunker - Breezer - Lawwill Pro Cruiser...

This rare shifter from the 1970's into the early 1980's was first prominent on muscle bikes like the Schwinn Stingray Fastback and then klunker mountain bikes based off the pre-war Schwinn Excelsior...

NIB/NOS Paramount ATB Oversized 2mm Brake Cable & Housing: FRONT - Brass Cable Head Shim For 4-Finger Levers - Silver Housing - Ferrules

Front brake cable in OS 2mm size that came on early retro mountain bikes from the 1980's.  The cable is thicker than modern cables (2mm vs 1.6mm), and features the larger oversized end that will...

Suntour Sprint / Superbe Pro / Cyclone 7000 Downtube Shifters: SL-IP00-B - 6/7sp (Near Mint)

Hard to find later version of the Accushift shifters, issued with the three top groups; Superbe Pro, Sprint, and Cyclone 7000.  The rear shifter has three settings: UL is for Ultra freewheels...

Suntour Power LD-1500 Retro-friction Downtube Shifters: Clamp On

These were among the first ratcheting "retrofriction" DT shifters Suntour released in the 1970's and into the 1980's.  They were a revolution at the time, and remain a great performing shifter...

NOS Suntour Blaze SL-3040-BS/CS Downtube Shifters: Accushift Plus 6 Speed - Black

Mid level black DT shifters from the late 1980's or early 1990's.   Condition New old stock, perfect. Never mounted Details Rear shifter: 5/6 speed indexed, or friction Front...

Suntour XC Pro BB-XP00-E Bottom Bracket: Bolts - 125mm x 68mm - WTB Grease Guard (Near Mint+)

Suntour's top of the line BB was a work of genius.  It incorporated WTB's Grease Guard, which allowed you to "repack" your bottom bracket without so much as removing your crank!  They're...

NOS Suntour Mountech Front Derailleur: FD-2700 V1 - 28.6mm - Triple MTB/Touring

This was Suntour's first mountain bike specific front derailleur, circa early/mid 1980's.  It was a response to the 1st Gen Shimano Deore touring/mtb group.  It's based on the ARX group...

NIB/NOS Suntour Alpha 5000 Rear Derailleur: Short Cage - RD-5000-SS - Cyclone-ish

The a5000 derailleur was situated directly below the Cyclone 7000 in the late 1980's, and is quite similar to that famous last generation Cyclone.  The biggest difference is the Cyclone got that...

Suntour XC Pro FH-XP20-7 Hubset: 32H x 135mm - 7 Speed MicroDrive - WTB Grease Guard (Near Mint+)

Great hubs for early 1990's high end mountain bikes.  This has the "Micro Drive" 7 speed freehub, which requires a 7 speed Microdrive cassette.  It has the famous Steve Potts and Charlie...

Suntour XC Pro Front Derailleur: 31.8mm - FD-XP00 (Near Mint+)

Top of the line Suntour mountain bike derailleur from the early 1990's.  This one's clamp side decal has been removed for sleeker looks. Condition Near mint or better very lightly used shape...

NIB/NOS Suntour Superbe Pro Track Cog: HC-100 - 15t x 3/32"

The Suntour Superbe Pro HC-100 track cog is the premier cog choice for Japanese pista bikes (and most others excluding Campagnolo built bicycles).  Gorgeous flat black anodizing.  Great for...

Suntour XC LTD Front Derailleur: 34.9mm - Bottom Pull - Black/Silver (EXC)

Late 1980's mid range MTB front mech, just below the XC Pro. Condition Excellent condition, some scratches in the black anodizing. Details Clamp: 34.9mm Bottom pull

NIB/NOS Suntour New Winner Ultra 6-speed Freewheel: 13-18t - NW-6500

NIB/NOS! The Suntour New Winner was their highest level freewheel for a few years in the 1980's (the winner series had 3 progressions. 1st was Winner, next New Winner, finally Winner Pro).  It...

NIB/NOS Suntour Superbe Pro Track Cog: HC-100 - 14t/15t/16t - 3/32"

The Suntour Superbe Pro HC-100 track cog is the premier cog choice for Japanese pista bikes (and most others excluding Campagnolo built bicycles).  Gorgeous flat black anodizing.  Great for...

Suntour 8.8.8. Track Cog: 16t - 1/8"

Very nice fixie / pista cog from Suntour.  The 8.8.8. marking is a common theme with Suntour parts. In Japan, the number 8 represents wealth, success, and prosperity.  This marking shows up...

NIB/NOS Suntour Superbe Pro Track Cog: HC-100 - 3/32" - 12t/13t/14t/15t/16t/17t /18t (bulk discounts)

The Suntour Superbe Pro HC-100 track cog is the premier cog choice for Japanese pista bikes (and most others excluding Campagnolo built bicycles).  Gorgeous flat black anodizing.  Great for...

NIB/NOS Suntour Superbe Pro Track Cog: HC-100 - 1/8" - NJS Approved - 12t/13t/14t/15t/17t (bulk discounts)

The Suntour Superbe Pro HC-100 track cog is the premier cog choice for Japanese pista bikes (and most others excluding Campagnolo built bicycles).  Gorgeous flat black anodizing.  Great for...

NOS Suntour Barcon Shifter Lever Blade

Are the lever blades on you Barcons worn out and ugly? Replace them with one or two of these!  Can be used for left or right shifters.  Included are a never used lever blade, rubber blade...