NIB/NOS Campagnolo C-Record Brake Lever Hood Plugs for Aero Routing: White (Pair)

These are the little rubber plugs that seal the non-aero routing cable holes in the tops of the hoods for 1980's and early 1990's Chorus/Athena/C-Record brake levers. Condition New old stock Details Pair

Aero Top Mount Downtube Shifter Mount Adapter For Colnago Master Krono TT, etc

This lil gizmo bolts to a special braze on that came on some top level 1980's aero and time trial bikes, and allows you to mount standard downtube shifters to it.  This one is from a Colnago Master Krono, which had a little divot on it's braze on...

Shimano Dura Ace EX PD-7200 Pedal Cage Plate: RIGHT Side - Screws (Mint)

This is a cage plate for a right side DA EX pedal. It will fit the Dura Ace AX PD-7300 as well, it just lacks the flip tab and AX logo the AX has. Condition Cage is mint, though it looks like it's been installed.  Details Right side

Huret Jubilee Bottom Bracket Cable Guide: #2236

Hard to find BB cable guide, for Jubilee and some Simplex front derailleurs. Condition Average used shape. Could certainly be cleaned up better to look nice Details Part: REF 2236  

Brake Drop Bolt: Rear Nutted or Front Recessed - Campagnolo Compatible (Near Mint+, TO?)

Campy style, sans logo.  Replace your road caliper brake's mounting bolt with this drop bolt to use a standard/short reach brake on a frame that needs a long reach.  This will fit Campagnolo Nuovo/Super Record/Gran Sport/Triomphe, Modolo...

NOS Brake Drop Bolt: Rear Nutted or Front Recessed - Campagnolo Compatible

Campy style, sans logo.  Replace your road caliper brake's mounting bolt with this drop bolt to use a standard/short reach brake on a frame that needs a long reach.  This will fit Campagnolo Nuovo/Super Record/Gran Sport/Triomphe, Modolo...

Campagnolo Pump Peg #648: Chrome Band Clamp - Post CPSC (Near Mint + Twisted Arm)

Classy way to carry your frame pump if your frame lacks a braze on.   Condition Excellent used shape with minimal wear, though the peg itself is a touch twisted. It'll work just fine as is, or bend it back into shape.  

MKS NJS Chain Tensioners: 5mm Dropout (Pair, NEW Take Off)

These are designed for horizontal dropouts to tension your chain.  This is the allen head version Condition New, but installed and not ridden. Details Pair Model: CA-MKS Fits dropouts up to 5mm thick Fits axles up to 10mm diameter 3mm...

MKS NJS Chain Tensioners: 5mm Dropout (Pair, NEW)

These are designed for horizontal dropouts to tension your chain.  This is the allen head version Condition New in package Details Pair Model: CA-MKS Fits dropouts up to 5mm thick Fits axles up to 10mm diameter 3mm allen bolt

Campagnolo Record Carbon Headset Top Cap + Bolt: 1 1/8" - Black

Carbon top cap assembly from the Chorus/Record threadless headset! Condition Excellent used shape, a bit of cosmetic wear Details 1 1/8" Includes bolt

Rene Herse Rack Mounting Bolts For Cantilever & Centerpull (NEW)

This is designed for Rene Herse, Compass, and most Nitto racks with integrated light mounts.  It will likely work for other racks too.  The attachment includes a locknut, so you can adjust the beam angle by hand, yet the light...

Early Lyotard Ref 669 Dust Cap: 1930's / 1940's - Knurled Edge Flat Head Slot - Course 460 / 240

This is a dust cap for the first gen Lyotard pedals from the 1930's and 1940's.  VERY scarce piece of Lyotard history. Condition Plenty of patina and tool wear to match the average patina on pedals this old, but perfectly usable.  Inside is...

NIB/NOS Campagnolo Brake Drop Bolt: Rear Nutted or Front Recessed

Replace your road caliper brake's mounting bolt with this drop bolt to use a standard/short reach brake on a frame that needs a long reach.  This will fit Campagnolo Nuovo/Super Record/Gran Sport/Triomphe, Modolo Professional/Speedy, Gran Compe 400,...

NOS Campagnolo #124 Bottle Cage / Mudguard / Rack Bolts: Chrome Steel (Sold In Pairs)

These are hard to find chrome hex nut bottle cage bolts from Campy!  They're also intended for fender and rack eyelet mounts. Condition New old stock.  These came to me in the OEM packaging shown, though package is not included...

NIB/NOS Shimano Straddle Cable Carrier Yoke: Silver

Silver cable carrier, that were OEM equipment on many cantilever and centerpull brakes. Condition New old stock in bag w/ hardware Details silver

NIB/NOS Sugino 75 Crank Bolts: Chrome Steel - Track / Road (Sold in pairs)

These are the bolts that come with Sugino's high end road and track square taper cranks, including the Sugino75.  For when even your crank mounting bolts need to be shiny!  They are stamped "Sugino 75" Condition New in sealed factory...

Drilled 1" Keyed Headset Washer/Spacer for Threaded Steer Tube: 2mm

For the weight weenies who want to shave a few grams, this is a cheap upgrade! This is a drilled keyed spacer to fit beneath your top nut on 1" threaded headsets.  It is required for fork steerers that have a slot down one side of the threads. ...

NOS Campagnolo #124 Bottle Cage / Fender / Rack Bolts: Chrome Steel (Sold In Pairs)

Hard to source steel hex head bolts for your water bottle cages, mudguard & rack attachment to eyelets, extra long toe clip bolts, or a variety of other uses that take M5 bolts.  Great for your L'Eroica bikes or vintage road bike restoration...

NOS/NIB Campagnolo Nuovo Record & SL Strada/Pista Pedal Race Set (2 Races)

One pair of inserted races for one pedal (each pedal needs two races). These fit Nuovo Record & Superleggera pedals, both road and track.  Super Record uses the same size races, but made of titanium Condition New in...

Silca #24.0 Brass Pump Head For Floor Pump - Vintage 1960's 1970's (EXC)

Retro brass pump head chuck for track/floor pumps from the 1960's to 1980's.   Condition Excellent to near mint used shape Details Brass

Vintage Alloy Square Taper Crank Bolts: GOLD Ano (EXC+)

Ultralight crank bolts! Unknown make, but they appear high quality.  Possibly Sugino?  These are a great excuse to ride without dust caps as they look wonderful!  Circular machining lines are visible, kind of like tree aging lines! ***As...

Raleigh Heron Crest Headbadge: Brass - 1960's 1970's - Original

This Heron badge was found on the top tier lightweight road racing bicycles in the 1960's to maybe early 1980's  Condition Near mint, with a lovely light patina!

NOS(?) REG #376 Umbrella Clip / Frame Pump Mount: Chrome - No Bolt

Classy alternative to the Campagnolo #632 to hang your Silica Impero or other frame pump on your classic bicycle!  This one is the clover design cutout, without the reinforcement ring that was introduced with the CPSC in 1978 Condition Appears new...

LOOK Keo Titanium Spindles / Axles: Right & Left DTPD 0151124 / 0151125 (NEW)

Original Look made titanium spindles for some Look Keo pedals!  These are a great weight saving upgrade.  You'll have to do your research to see if they fit your pedals, I've not figured out which ones they fit.  Mike's Bikes sells these...

NOS Teledyne Titan Seatpost Binder Bolt: RARE! - Chrome

Is your 1970's titanium Teledyne Titan frame missing it's unique post binder bolt?  This is the original in NOS condition! It will work just fine for other frames as long as the width is right.   Its a great alternative to the Campagnolo...

NOS Ideale #2 Saddle Clip / Seat Clamp: Chrome Plated - Standard Width 38mm

Clean and complete saddle clip for your Ideale saddle, or any other saddle with standard width rails.  This one has its original thin nuts! Condition New old stock, minor shop wear.  One nut has a few spots of rust.  

NOS Shimano Dura Ace 7600 NJS Track Cog Lockring: Black

Original pista track cog lockring from the Dura Ace 7400 group.  NJS stamped. Condition New old stock Details Black Threads: English

Fabric Stratosphere Pro Floor Pump Replacement/Upgrade Parts: Braided Hose w/Head - Wooden Handle & Base - Gauge - Shaft

Replacement parts lot for your premium Stratosphere Pro, or upgrade parts to make your Stratosphere a Pro!  This appears to be most of a complete pump, but the shaft is oddly too short.  I acquired all this from a shop buyout, I am unsure...

NOS Campagnolo #646 Rubber Seal Washer For Silca Impero Frame Pump Head

This is the rubber seal that goes under any pump head on Silca Impero frame pumps.  It will work with many other frame pumps as well. Condition New old stock Details Sold individually

NOS Campagnolo Nuovo/Super Record Barrel Adjusters: PAIR - Black O-Rings - Fits All Vintage Campy Brakes

Untouched set of original Campagnolo barrel adjusters!  These were original equipment with Super Record, Nuovo Record, 50th, and Cobalto brakes.  They will fit many other models, listed below.  They even fit Suntour Superbe...

Shimano Dura Ace Downtube Cable Right/Rear Stop: STI + Bar End Barrel Adjuster: SM-CT74 - FLAT - Bolt (Single, New)

This adapter bolts onto your vintage bike's downtube braze on mounts, and act as cable stops for STI, Ergo, and bar end shifters.  This is the version with housings that are flat, to fit your alloy and carbon frames.  Includes stainless steel...

NIB/NOS Shimano Dura Ace Shifter Hardware Kit: Downtube Cable Stop STI Adapter Barrel Adjusters (SM-ST74) - BB Cable Guide (SM-SP17-M) - Ferrules

The adapters bolt onto your vintage bike's downtube shifter mounts, and act as cable stops for STI, Ergo, and bar end shifters.  This is the version with housings that are curved (concave) to fit around your frame's downtube.   This is...

NOS DIA COMPE / Weinmann Step Down Brake Lever Ferrules: Road / BMX / Flat Bar (Sold in Pairs)

These ferrules fit in the top of non-aero road brake levers, as well as for flat bar bmx and city brake levers.  They came with DIA COMPE, Gran COMPE, Gipiemme, Weinmann, and similar levers.  They work with most levers that don't have threaded...

NIB/NOS DIA-COMPE 287 Aero Brake Lever Hoods: Black - 287. 7K (Pair)

Hard to find replacement hoods for the DIA-COMPE 287 brake levers which were designed for specifically cantilever brakes.   Condition New in factory sealed bag Details Black Model on package: 287.7K

NOS Marcel Torino Wing-Nuts: Brass + Chrome - 5/16" Axle (Sold In Pairs)

Before Tullio Campagnolo invented quick releases in 1927, the best method of wheel attachment was the axle wing nut.  They provide a tool-free installation and removal, vs traditional axle nuts which require a wrench.  Today, they are loved by...

Middleburn R01 Triple Road Crank Spider: 104/64mm - 44mm Chainline (NEW)

This 4 bolt, 104mm BCD is designed for triple and double on the Middleburn R01 crank arms (and probably Middleburn's other crank arms, they're all the same interface.  The difference seems to be the chainline the spider produces on a given crank...

NOS Huret Luxe Wing Nuts: Chromed Brass - 5/16" For Front Hub Axle (Sold In Pairs)

Before Tullio Campagnolo invented quick releases in 1927, the best method of wheel attachment was the axle wing nut.  They provide a tool-free installation and removal, vs traditional axle nuts which require a wrench.  Today, they are loved by...

Frank Spivey(?) Long Cage For Campagnolo Nuovo Record: Drillium - Bullseye Pulleys - 123mm c-c - Cupertino/Spence Wolf (Near Mint+)

This custom extra long cage quite likely came out of Frank Spivey's workshop, alongside the better known yet ultra rare Spence Wolf Alpine.  This one is even longer, at 123mm center to center on the pulley bolts!  The cage consists of two...

SRAM Rival Medium Derailleur Cage Kit: NO PULLEYS - 11.7515.033.040

Replacement medium cage for SRAM Rival rear derailleurs.  Does NOT include pulleys.  Kit includes inner & outer cage plates, bolts for jockey wheels, spring. Condition New in package Details Part number: 11.7515.033.040

NOS Campagnolo Rear Derailleur B-Screw For Vertical Dropouts: Pre-2001 Models

This is a B-screw for 2000 and earlier Campy rear derailleurs, necessary when mounted on vertical dropouts.  The instruction sheet mentions it's for 7 speed freewheels, but this should work for most freewheels. Condition New in...

Campagnolo FC-RE012 Ultra Torque (UT) Crank Bearings & Seals: Record / Super Record / Chorus... (Pair, NEW)

Set of bearings and seals for 10 speed and 11 speed Ultra-Torque cranksets. Condition New in retail package Details Replacement bearings for Campagnolo UT cranks.  Set of bearings and seals ( 2 pcs.) For 10s & 11-speed cranks ID=25...

Shimano Ultegra 11s ST-6800 STI Name Plate & Fixing Screw: FRONT/LEFT - Y00F98020

OEM replacement faceplate for Ultegra 11s shifters from the 6800 group.  Includes fixing screws. Condition New in factory sealed package Details Includes (one) faceplate and (two) fixing screws. Left hand

OMAS Bottle Cage & FANCY Alloy Bolts: Ref. 180 & Ref. 182 - White - 46g + 4g (Near Mint++)

Super rare ref. 180 bottle cage and ref. 181 cage bolts from O.M.A.S. circa 1970's.  These bolts are among the coolest looking bolt heads I have ever seen! They sometimes came in the Campy upgrade bolt kits.  The cage itself is a clone of the...

NOS Campagnolo Delta Brake Bellow Accordian: White - C-Record / Croce D'Aune - Barrel Adjuster Cover (Sold Individually)

This is the rubber piece that covers the barrel adjuster on 2nd, 3rd, and 4th gen Delta brakes.  The color is a slightly greyish white. These are originals from the 80's and early 90's Condition New old stock, perfect.  If you buy all four of...

FSA 1-1/8" Compressor Pro Expansion Plug For Carbon Steer Tube: Carbon Top Cap (NEW)

Compression plug for carbon steerers, with carbon fiber top cap. Condition New in package Details  1 1/8" Carbon top cap Black MSRP: $39

LEFT Campagnolo Chorus Ergo Downtube Shifter Cable Barrel Adjuster / Adapter: Black - (NEW)

 Out of production and not available anywhere else in this black version!  These cable barrel adjusters bolt on to your frame's downtube shifter boss's, and allow the use of Ergopower, STI, or bar-end shifters.  MUCH nicer than the Shimano...

NIB/NOS TA REF. 83 DOUBLE Chainring Coupling bolt set : Pro 3 Attaches / Pro 5 VIS - (3) bushed nut, washer, screw

Set single ring chainring bolts to couple your two chainrings on a Specialties T.A. Pro 3 Attaches crank.  These are also the exact same bolts used by the Pro 5 Vis (REF 64), just in a 3 pack.  You'll need two packs of these for their 6 bolt...

Maxis Modular Valve System (MVS) Stems: 48mm - Sold in Pairs

The Maxxis Modular Valve System allows you to easily customize your bike. The separation of the tube and valve stem allows you to choose your valve length without having to deal with finicky valve extensions. When the tube eventually needs to be...