ERA

NIB/NOS Campagnolo Nuovo / Super Record Brake Pads: #2010 - Black (Set /4)

This is a vintage set of brake pad inserts for 1960's, 1970's and 1980's Campagnolo brakes.  They fit Super Record, Nuovo Record, Gran Sport, and Victory/Triomphe brakes.  Genuine original pads. Condition New old stock, supple. Slightly dirty...

Campagnolo Victory Rear Brake (LOW MILES, MINT)

Why pay top dollar for NOS Super Record brakes for a bike that's not a prestigious show bike when you can get the same performance and damn near the same appearance for less than half the price?  The only two differences between these and a Super...

Campagnolo Super Record Rear Brake: #4061/1 V2 - NOS Pads (LOW MILES, Mint)

Show worthy example! The gold standard for brakes on 1980's Italian road bikes!  These are the 2nd version of the SR brakes, with the script logo and alloy tire guides.  Condition: Practically pristine and exceptionally clean. I think the pads...

Campagnolo Nuovo Record Brakeset: #2040/1 - Short Reach - Recessed

Short reach Nuovo Record sidepull road brakes from the post CPSC era, 1978 to 1984+.  Domed qr levers, original adjusters.  You can discern short reach from standard reach NR brakes by noticing where the Campagnolo logo lands. On short reach,...

Campagnolo Nuovo Record Brakeset: #2040/1 - Short Reach - Recessed (EXC+)

Short reach Nuovo Record sidepull road brakes from the post CPSC era, 1978 to 1984+.  Domed qr levers, original adjusters.  You can discern short reach from standard reach NR brakes by noticing where the Campagnolo logo lands. On short reach,...

Campagnolo Nuovo Record Brakeset: #2040 - Nutted - Standard Reach - Flat QR Pre CPSC (Near Mint, worn pads)

Clean NR/SR brakes have gotten really tough to source!  This set is pre-1978 with flat quick release levers and nutted bolts. Standard reach Condition Near mint lightly used shape! Quite clean, some very light scattered cosmetic wear. Hardware is...

Campagnolo Nuovo Record Brakeset: #2040 - Nutted - Standard Reach - Flat QR Pre CPSC (Near Mint)

Clean NR/SR brakes have gotten really tough to source!  This set is pre-1978 with flat quick release levers and nutted bolts. Standard reach Condition Near mint lightly used shape! Quite clean, some very light scattered cosmetic wear. Hardware is...

NIB/NOS Rustine's Hoods: Campagnolo Nuovo/Super Record + Modolo/Superbe - Black

These fit Campagnolo brake levers including Nuovo Record, Super Record, Triomphe, Victory, Gran Sport.  They also fit Suntour Superbe, Gipiemme Crono Sprint, Modolo Corsa & Speedy levers.  These hoods have the Rustine's logo, but are...

Campagnolo Nuovo Triomphe Brake Levers: Tan Hoods - Polished (Low Miles, Scrapes)

Nuovo Triomphe levers are largely the same as 4th gen Nuovo Record, just with polished finish vs NR's silver anodized and Shield logo vs NR's delta logo.   Condition These are just barely used but have some outer edge scraping. Hoods show...

NOS Campagnolo Nuovo Triomphe Brake Levers: NR Hard Ano Bodies - 1980's - Polished

Nuovo Triomphe levers are largely the same as 4th gen Nuovo Record, just with polished finish vs NR's silver anodized and Shield logo vs NR's delta logo.   Condition New old stock lever blades & pivots on lightly used hard anodized Nuovo...

NOS Campagnolo Nuovo Triomphe Brake Levers: NR Ano Bodies - 1980's - Polished

Nuovo Triomphe levers are largely the same as 4th gen Nuovo Record, just with polished finish vs NR's silver anodized and Shield logo vs NR's delta logo.   Condition New old stock lever blades & pivots on lightly used anodized Nuovo Record...

Campagnolo Victory Brake Levers: Drilled

These levers are the same as last generation Super Record 4062 levers with the exception of the logo on the face of the blades.  These Victory levers have the Campy Shield logo, where the Super Record has the Campagnolo name spelled out in a shield...

Campagnolo Victory Brake Levers: Drilled (LOW MILES NEAR MINT++)

These levers are the same as last generation Super Record 4062 levers with the exception of the logo on the face of the blades.  These Victory levers have the Campy Shield logo, where the Super Record has the Campagnolo name spelled out in a shield...

Campagnolo #4062 Super Record Brake Levers (EXC+ w/dead Hoods)

Drillium Super Record levers with their original brown/tan gum hoods (hoods are long past their useable days). Condition Levers are in excellent to near mint shape with light wear and faint face/end scuffs. Hoods are cracked and dead...

NOS Campagnolo Nuovo Record Brake Lever: #2030 - 4th Gen 1985-1987 - No Hood - #2030

Untouched set of NR levers!  These are a rare last generation version circa 1985-1987 made during the C-Record era as Campagnolo wanted to use up their supply of spares. They are identified easily via their lack of "brev camp" engraved in the lever...

1st Gen Campagnolo Nuovo Record Brake Levers: Round Hole - Long Reach - #2030 (EXC)

Rare set of early NR levers, quickly identified by the round hole on the back of the blades vs the later (and MUCH more common) lever's "U" shaped opening and unanodized bodies. The lever blade is also slightly different, with a bit more bend and longer...

1st Gen Campagnolo Nuovo Record Brake Levers: Gum Hoods - Round Hole - Long Reach - #2030 (EXC)

Rare set of early NR levers, quickly identified by the round hole on the back of the blades vs the later (and MUCH more common) lever's "U" shaped opening and unanodized bodies. The lever blade is also slightly different, with a bit more bend and longer...

Campagnolo Nuovo/Super Record Brev Chainring Bolts: #754 + #755 - Steel (Mint, set/5)

Clean set of vintage Campy chainring bolts.  These are appropriate for 1960's to 1990's Nuovo Record, Super Record, C-Record, Chorus, Gran Sport, Tripmphe/Victory, Croce D' Aune, Athena, etc cranks. Condition Mint barely used shape.. Nicer in person...

NOS Campagnolo Nuovo/Super Record Crank Arms: #1049/A: 170mm - Dust Caps - 1980s (Take-Off)

Fresh id 1980's NR/SR strada crank arms for your L'Eroica bike build or your backup fancy bike Condition New old stock take offs from a show bike with only a couple test rides. Exceptionally clean though not perfect. Details Arm length: 170mm BCD:...

NOS Mafac Guidonnet City/Touring Brake Levers: White Plastic Blades

Unique French city, townie, or touring brake levers from the 1960s and 1970's.  They're designed for French riser city bars, moustache bars, or flat bars. Condition New old stock! Bodies/clamps are close to pristine. Plastic covering on levers has...

NOS Mafac Racer Centerpull Brakeset: (1) Straddle Cable - Long Reach

Fresh set of Mafac Racer centerpull brakes from the 1970s and 1980s.  Condition New old stock, never installed. Some light shop wear. Note one caliper's straddle cable & anchor are missing. Details Reach: Long Reach (~50mm-75mm) Nutted Silver

NOS Mafac Racer Centerpull Brakeset: Straddle Cables - Long Reach

Fresh set of Mafac Racer centerpull brakes from the 1970s and 1980s.  Condition New old stock, never installed. Some light shop wear. Details Reach: Long Reach (~50mm-75mm) Nutted Silver

NOS Mafac Racer Centerpull Brakeset: Polished - Straddle Cables

Fresh set of Mafac Racer centerpull brakes from the 1970s and 1980s. These arms have been polished, and one of the caliper's pivot & stationary straddle cable anchor are polished too.  Condition New old stock, never installed. Some light shop...

NIB/NOS Cyclo Pans Freewheel Kit: 6 Speed 13-24t FW + 10 Cogs / Pawls / Springs / Tool / Oil

This is a 1980's freewheel kit from Cyclo.  It comes with a ready to ride 5 speed 14-21t freewheel, as well as 10 loose cogs (up to 24t) to customize your gear ratio.  It includes pawls, springs, and spacers.   Uses a 4 prong remover...

Regina Extra America 6 Speed Freewheel: 14-23t (LOW Miles Near Mint+)

The Extra America was Regina's top of the line freewheel in the 1980's and early 1990's, and is a perennial favorite among cyclists of all flavors.  These were paired with Campagnolo friction gruppos often. This 14-23t size is perfect to replace...

NOS Benotto Professional Cello Bar Tape: Ivory White - Smooth - Vintage 1970's 1980's

An old favorite for vintage road bikes!  This tape is thin, flexible, and does not get dirty!  Hard to find creamy ivory white color.  Benotto tape was introduced in about 1975 and ran through the mid 1980's, and is a top choice for...

NOS Campagnolo #622 Steel Coil Derailleur Housing w/ Ferrules (One Step-Down): 235mm

The vast majority of high quality road bicycles from the 1950's through 1970's (especially Italian bikes) used a stainless steel "spring" type housing loop for the rear shift cable housing. Exactly what you need to finish your vintage restoration! ...

Kingsbridge Fixed Cup Tool: Universal Bottom Bracket Cup Remover - Works on Cups w/ Damaged Wrench Flats (RARE)

This is a very tough to find old shop tool used to remove stubborn or broken bottom bracket cups.  It works with practically all cup and cone square taper BB cups, as it is friction based and doesn't rely on the wrench flats.  The longer piece...

VAR 30 Bottom Bracket Fixed Cup Remover Tool: No Jaws

VAR's legendary French tool for removing the fixed cup of your bottom bracket. This one is known for not leaving marks on the cup, while making removal a cinch.  It is pretty tough to find, and sought after by mechanics who love vintage and antique...

VAR 30 Bottom Bracket Fixed Cup Remover Tool: 30/1 Jaw Campagnolo/ Shimano (Near Mint)

VAR's legendary French tool for removing the fixed cup of your bottom bracket. This one is known for not leaving marks on the cup, while making removal a cinch.  It includes VAR 30/1 jaw that fits Campagnolo, Shimano, Spidel, etc.  It is pretty...

Specialties TA Crank Puller / Extractor: 23mm

Original TA crank puller!  Tough to find.  Why use a modern 23mm extractor on your TA when you can get a TA? Condition Excellent used condition. Threads are very smooth. Details 23.0mm

Specialties TA REF. 24 Chainring Bolt Tool: 8mm T-Wrench For Hex Nuts (RARE!)

Excessively rare and useful key specifically for the older style domed Specialties T.A. chainring bolts (as well as other 8mm French chainring bolts). The special bit here is the wrench's opening is straight and untapered so it grabs the entirety of the...

FSA BB30 EE039 Bottom Bracket PF30 Threaded Adapter Extractor: 73mm (Lightly Used)

This tool helps remove stubborn threaded adaptors for BB30 shells. Condition Lightly used shape, no damage Details Part numbers: 800-0010, E3122, E0039 MSRP: $40

Derailleur Alignment Gauge DAG: Campagnolo R Tool Clone

This is essentially a Campy "R" DAG tool without the Campagnolo branding and slightly different finishing touches. The handle is more crude but pretty closely designed to the Campy. Best guess is this is from one of the main Campy clone companies like...

NIB/NOS Wheelsmith Tensiometer Spoke Tension Gauge + Calibration Chart

The most trusted spoke tension meter ever made! Includes recalibration chart. These have gotten pretty hard to find. Condition New old stock with manual, calibration chart, and foam. Actual box not included.  

Hayes Feel'R Gauge: Easily Centers Disc Brake Pads (NEW)

Affordable yet indispensible tool that makes centering your rotor between your pads a cinch. This is the best one I've found for this purpose. Condition New Details Purple MSRP: $24

Campagnolo Over-Torque Assembly / Disassembly Tool: UT-FC130 + UT-FC220 (Lightly Used)

Rare & expensive installation and disassembly tools for Campagnolo Over-Torque cranks. Campy may have outdone themselves with the over-complexity in of installing a simple crankset, but if you have one of these cranks you need these rare tools. HERE...

Campagnolo UT-FC090 Power Torque Crank Extractor tool (Near Mint Lightly Used

Extractor for the non-driveside / left arm of Campy PowerTorque cranks. Condition Near mint lightly used shape. Comes in retail box with manual. Details  

Campagnolo UT-CN400 Chain Breaker Tool: 12/13 Speed (Lightly Used)

Shop quality tool for working with Campy 12 speed and 13 speed chains. Condition Near mint lightly used shape. Comes in retail box with manual. Details MSRP: $260

Campagnolo UT-CN300 Chain Breaker Tool: 11/12 Speed (Lightly Used)

Shop quality tool for working with Campy 11 speed and 12 speed chains. Condition Near mint lightly used shape. Comes in retail box with manual. Details MSRP: $260

Hi-E Front Hub & QR Skewer: Low Flange - 24H Bladed - Silver - Engraved Logo (Near Mint Perfect Bearings)

Rare quick release skewer with a low flange hub that has keyhole spoke holes for fully bladed spokes. Hi-E hubs were produced out of Tennessee from about 1972 into the early 1990's.  They were an engineering marvel at their time, featuring...

Brooks 1930's Leather Toe Straps: Black - Vintage-Look / Modern Production (LOW Miles Near Mint+)

Brooks issued these in recent-ish years as a reproduction of the toe straps they made in the 1930's. They have that "antique" look with the shape of the buckles. These are discontinued and somewhat hard to find. Condition Barely used, close to mint!...

Sachs-Huret Jubilee Rear Derailleur: Short Cage - Drilled - 1980s (Near Mint)

This is the final version of the Jubilee RD circa ~1985! Sachs acquired Huret in 1980 but the rebadge didn't happen until around 1985. It remained largely the same as the Huret drillium version but the badges on both sides became SACHS-HURET). This is...

Huret Jubilee Rear Derailleur: Short Cage - Non-Drilled (LOW MILES Near Mint+)

The Huret Jubilee was designed as the ultimate derailleur, to commemorate the French company's 50th anniversary.  It featured a drilled cage, adjustable ball bearing jockey wheels, and tiny hardware.  It weighed a scant 150 grams, and is...

NOS Mavic 860 Front Derailleur: 28.6mm Clamp - Black

The mid 1980's Mavic 860/862 derailleurs are the stuff of legend.  They work amazingly well, look great, and stand out from the crowd.  Highly sought after and fairly rare. Condition New old stock, no box. Very minor shop wear not worth...

Mavic 851 SSC Rear Derailleur: RARE Vintage 1980's Pro Version of 801 RD (EXC)

This mid 1980's derailleur was the peak of Mavic's rear mech technology in the SSC era.  It was the professional version of the similar 801 derailleur, the main differences being the 851's needle bearing jockey wheels (though this one has upgraded...

DT Swiss Conversion End Cap LOT of 29: 12x142 / 12x135 / 15mm-20mm to QR / Classic Road QR / etc

Big lot of 29 axle end caps for DT Swiss hubs! Great for repair shops. Priced at about $5 per cap. Condition Varied used condition but largely excellent shape! I haven't cleaned these at all. Bearings feel wonderful.  

DT Swiss Freehub Body Lot: 11s Road / Ratchet EXP & LN / Campagnolo / 10s HG (14 Bodies Plus Extras!

Big lot of 14 DT Swiss freehub bodies plus some extras! Great for repair shops! This is priced at $14 per freehub and the extras are freebees. Condition Varied used condition but largely excellent shape! I haven't cleaned these at all. Bearings feel...