DRIVETRAIN

Bullseye Crank: 2nd Gen 1980's - 178mm x 110/74mm Triple - White Original Finish

Rare 1980's Bullseye tubular chromoly crank! It comes with a 110/74mm spider for mountain bike use, but these arms are loved by old school BMX'ers either with integrated spider chainrings or just using this one with a single ring. This is a second...

NOS Phil Wood Pro Titanium / Magnesium Bottom Bracket: 108mm JIS - BSA Rings - Tool (NEW)

Rare top shelf "Pro" version of the venerable Phil Wood sealed cartridge bottom bracket. This is the PW-BB-M2 which combines a special titanium spindle and magnesium cartridge shell. The ti spindle is lighter and stiffer in this magnesium/ti version vs...

Campagnolo RD-EK100 Ekar 13-Speed Derailleur Pulley Set: 6.7mm (NEW)

Replacement ceramic bearing pulleys to fit all Campagnolo Ekar 13 speed rear derailleurs and probably others that need 6.7mm width.  Condition New in sealed retail box Details Width: 6.7mm Black MSRP: $40

Campagnolo Power-Torque Chainring Bolt Kit FC-AT300: Athena 2011 to 2014 (NEW)

Rare chainring bolt set for 2011-2014 Athena Powertorque cranks. Condition New in opened box, inner bag sealed    

Campagnolo Athena 11s FC-AT100 Chainring Bolt Set (NEW)

Athena 11 speed FC-AT100 bolts Condition New in sealed box Compatibility  

Campagnolo FC-SR300 Chainring Bolt Set: 4 Arm 11/12s (NEW)

Set of 8 screws for 4 arm 12s and 11s Campy crank arms. Condition First ordered new in sealed OEM bag, second ordered in sealed OEM bag Compatibility Fits 4 arm 11 and 12 speed cranksets

Campagnolo Super Record FC-SR200 Chainring Bolt Set: Double (NEW)

Torx bolts for various 11 anmd 12 speed cranks that the bolts screw directly into the crank arm (no nuts needed) Condition New in sealed OEM bag Compatibility 5 piece set - 4 chainring bolts and 1 hidden crank arm bolt (plus ring washer)

Campagnolo Chainring Screws & Bolts - FC-SR100 / FC-AT300 - Double (NEW)

Set of 4 torx head chainring screws/nuts with a 5th longer bolt and spacer. Condition New in retail box. First one ordered is factory sealed, second has been opened Compatibility Athena Power Torque (from 2011) Centaur Power Torque (2011 - 2014) Veloce...

NOS Fulcrum (Campagnolo) 10 Speed Chainring: 50t x 110mm - Black

Fulcrum is Campagnolo's entry to mid level brand. This chainring is a more affordable substitute for Campy Record/Chorus/etc 9 and 10 speed cranks. Condition New old stock, slight shop wear Details 50t compact BCD: 110mm 5 bolt Black w/ silver teeth

Campagnolo CX11 Inner Chainring: 36t Compact - FC-CX236 - Black (NEW)

Inner ring for Campy CX11 cranks using their proprietary 5 bolt 110mm bcd Condition New in box. Details 34t 110mm x 5 bolt (only fits Campagnolo 110mm cranks) Black / silver

Campagnolo Super Record 11s Outer Chainring: 50t Compact - X.P.S.S. (NEW)

Campagnolo's 2011-2014 eleven-speed chainrings use a mounting system that differs from both earlier and later generations. The outer ring mounts with four standard chainring bolts plus one hidden bolt that threads into the back of the crank arm. The four...

Campagnolo 11 Speed TT Bar End Shifters: Carbon -TT11CGC (NEW)

Current production Campy bar end shifters.  These have a cool feature that brings the levers back to their starting point (like an Ergo shifter lever) after every shift.  These are Record/Super Record level. Fits Campagnolo 11-speed (2008-2015)...

Campagnolo Record 10s TRIPLE Front Derailleur: Braze On - Silver (LOW MILES Near Mint++))

Rare triple version of the 9/10s Campy Record silver front mech.  The last version of Record made in silver/polished Condition Barely used and close to mint. There is a tiny rub on the tail of the outer cage and faintst inner cage chain rub...

NIB/NOS Tacx Toothless Jockey Wheels: Sealed Bearings - White - EARLY

Tacx is known for their rear derailleur pulleys today, but these toothless sealed bearing from the 1970's or 1980's are truly elusive! They were perhaps marketed as aftermarket upgrades for derailleurs such as the Campagnolo Gran Sport, Simplex Simplex...

Campagnolo 10 Speed TT Bar End Shifters : SL12-TT10CG (Barely Used)

Hard to find 10 speed Campy bar end shifters from ~2012.  These are return to center levers! Record/Super Record level. Turn your time trial or triathlon bike into a smooth-shifting machine with Campagnolo's TT Bar-End Shift Levers. Campagnolo's...

ROTOR Track24 Threaded Bottom Bracket: CERAMIC - BSA (Perfect Bearings, Low Miles

Hard to find ceramic bearing version of the ROTOR threaded external bearing BB. Its model is " Condition Very low miles, perfect bearings. Light tool marks. Details 24mm threaded Ceramic bearing MSRP: $249

ROTOR 3D24 Track Crankset: 170mm x 49t Vision Pro - Black (Barely Used Near Mint+)

Hard to find ROTOR 3D-24 track crank with a 49t Vision Pro track chainring. This appears to be an earlier version of the 3D30 and 3D ALDHU cranks. Condition Very very low miles, near mint or better! Arm ends are unscraped. Very minimal cosmetic wear,...

Campagnolo Nuovo Record Three Hole Front Derailleur: 1052/NT - 25.4mm Clamp (EXC+)

Vintage 3 hole NR front mech from the 1980's, in clamp on format for your classic steel road bike.   Condition Quite clean overall with minimal wear, though the cage screw was overtightened at some point and the chrome has cracks around it (not...

Campagnolo Nuovo Record Rear Derailleur: Pat 1978 (Near Mint)

Late 1970's NR rear derailleur, for your L'Eroica ride or restoration bicycle. This is from 1978, the first year of the CPSC changes (which for the RD was those lawyer cones on the limit screws) Condition: Near mint lightly used condition! It looks even...

NIB/NOS Campagnolo Nuovo/Super Record Rear Derailleur: Ti Bolts - Bullseye Pulleys Red - Pat 1984

Rad souped up "SUPER" NR rear mech from 1984! This one has been upgraded with Super Record upper/lower pivot bolts plus the obligatory red ano Bullseye pulleys. The limit screw lawyer cones have been removed for a cleaner look. Condition New old stock in...

NOS Campagnolo Steel Coil Derailleur Housing w/ Silver Ferrules: 250mm - #622 / #617

The vast majority of high quality road bicycles from the 1950's through 1970's (especially Italian bikes) used a stainless steel "spring" type housing loop for the rear shift cable housing. Exactly what you need to finish your vintage restoration! ...

Phil Wood Fixed Gear / Track Lockring: Stainless Steel - Left Thread (New)

Lockring for standard threaded track cogs from Phil, Campagnolo, Miche, etc Condition New, no package. Details Stainless Steel 33.5mm x 24tpi left-hand thread MSRP: $35

Frejus Cottered Crank Arm: Non-Driveside - 170mm - BSA - Chrome (Near Mint++)

Clean example of a ~1950's or 1960's Frejus fluted crank arm. It could be either strada or pista.  Condition Near mint or better very lightly used condition. Slightest hint of pitting, very little actual wear. Details 170mm 9/16" BSA threads

Huret Jubilee Group: Front & Rear Derailleurs + Cable Guides (Near Mint+)

Super clean examples of the legendary Huret Jubilee derailleurs and cable guides! Front derailleur is the four hole version was second gen, issued in 1977 and ran through the early/mid 1980's. The first gen was 1972-1976 and had a 5th hole at the far...

Sachs Huret DuoPar Titanio Rear Derailleur: Touring (budget)

This is the ultra rare titanium version top shelf companion to the more common (and later) steel Duopar Eco.  Both cage plates, as well as the parallelogram plates are ti The DuoPar derailleur is has the widest gear ratio ability of ANY road bike...

NIB/NOS Bendix Stick : 3 Speed - Archie Comics - 1960's Muscle Bike Stingray

This curiosity of 1960's era bicycle history was every kid's aspiration! While they could only dream of owning the latest Chevy Camaro or Dodge Charger, they could have a muscle bike like the Schwinn Stingray Krate or a Raleigh Rampar with a "four on the...

NIB/NOS Sugino 75 NJS Bottom Bracket Spindle: 109mm x 68mm - ISO - BB-SG75 - MS-68 MW-68LP

The Sugino 75 spindle is an ISO taper, compatible with all ISO cranks (Dura Ace, later Campagnolo, etc).  Condition New in sealed oem packaging Details 109x68mm ISO square taper

GRAN-COMPE ENE Ciclo Downtube Shifters: Retrofriction 5-10 Speed (NEW)

DIA-COMPE designed these premium downtube shifters to look like the vintage Campagnolo/Suntour shifters we all love but with a smoother shifting action and refined lever blade shape.  This set has the nicer coated champagne colored hardware...

Shimano SM-EW90-A Di2 Junction Box - 3 Port (New, open bag)

SM-EW90-A 3-Port Cockpit Junction Box connects 1 pair of Di2 shifters to the frame junction box via 3 SD50 E-tube wires Condition New in box, though inner bags are opened. Details MSRP: $140

Shimano SM-BA01 Bottle Cage Adapter for Di2 Battery (NEW)

This mounts your Di2 battery to bottle cage bosses. Condition New in box  

Shimano Di2 D-Fly SM-EWW01 Wireless Unit (NEW)

This mounts on the seatpost and connects your Di2 groupset to your phone through Shimano D-Fly app. Condition New in box Compatibility Dura Ace Di2 9070 Dura Ace Di2 R9150 Ultegra Di2 6770  Ultegra Di2 6870 Ultegra Di2 R8050 XTR Di2 M9050 XT Di2...

Shimano Ultegra ST-R8020-L Di2 LEFT STI Shifter: Hydraulic - 2x

Hydraulic disc brake, electronic shifting 11 speed brifter. Condition This one looks new at first glance but it has a couple issues. First, the hood seems too wide at the bottom and it pops out at both sides. Second, the plastic above the faceplate has a...

Shimano Dura Ace ST-7970 Di2 STI Shifters: 10s (Near Mint+ Low Miles)

First gen Di2 electronic shifters for rim brakes! Condition Near mint or better lightly used shape. Very very clean overall, the only imperfections worth noting are both noses of the hoods going to the very tops of the faceplates have light scraping and...

Shimano Dura Ace ST-7900 STI Shifters: 10s (LOW MILES! Rear Mint / Front Near Mint)

Best of the best for 10 speed Shimano brifters.  These are tricked out with carbon fiber lever blades and titanium hardware.  They're a significant upgrade over the older 10-speed ST-7800 shifters.  Nicer shape, shorter shift throw,...

Shimano Ultegra CS-R8000 12-Speed Cassette: 11-34t (NEW)

Wide range 12 speed cassette to fit both 11 speed and 12 speed freehub bodies.  Condition New in box Details 12s 11-34t

Shimano 105 11s RD-R7000 Rear Derailleur: GS Long Cage - Road/Gravel (Near Mint)

A gravel friendly "road" derailleur! Condition Near mint lightly used shape. Very light cosmetic wear. Details 11s GS medium "long" cage Up to 34t

Shimano Ultegra FD-R8000 Front Derailleur: 31.6mm Clamp (New)

Top performing braze on front mech from the Ultegra 11 speed group. Condition New, no box. Slightest tinge of shop wear. Details Double 31.6mm clamp

Shimano Ultegra RD-6800 SS Rear Derailleur: 11 Speed - Short Cage (EXC)

Short cage rear derailleur from the first Ultegra 11 speed group. Condition Excellent used shape with some cosmetic wear. Details SS Short cage Black

Shimano Ultegra RD-6800 SS Rear Derailleur: 11 Speed - Short Cage (Near Mint+)

Short cage rear derailleur from the first Ultegra 11 speed group. Condition Near mint or better lightly used shape. Very minor cosmetic wear.  Details SS Short cage Black

Shimano 105 10s / 12s Mini Groupset: FC-R7100 + 5700 (RD, FH, CS)

Random lil group of four Shimano 105 parts. This is mostly 5700 10 speed parts plus a 12 speed R7100 crank. Condition 5700 parts are near mint with low miles. Crank is excellent but has a smattering of tiny cosmetic ano marks. Details Crank: FC-R7100,...

Shimano Ultegra RD-6700 Long Cage Rear Derailleur: Ice Grey

Affordable and smooth 10 speed rear derailleur. Condition Average used shape, some minor wear Details Short cage Grey

Shimano Ultegra CS-6800 11-Speed Cassette: 11-25t (EXC+)

Mid ranged 11-25t gearing for your road bikes! Condition Excellent or better lightly used shape Details 11s 11-25t

Shimano Dura Ace RD-9000 Rear Derailleur: 11 Speed (EXC)

Smooth shifting and smooth looking derailleur from the DA 9000 11 speed groupset.   Condition Excellent used shape. The left lower knuckle and the housing around the cable cinch bolt are scraped. Other than that just light imperfections...

Shimano Dura Ace RD-9000 Rear Derailleur: 11s (LOW MILES Near Mint+)

Smooth shifting and smooth looking derailleur from the DA 9000 11 speed groupset.   Condition Near mint to mint, ridden less than 100 miles! Easily passes for new if you don't look too close. No scrapes/scuffs. Very minimal cosmetic...

Shimano Dura Ace FD-7900 Front Derailleur: 10s - 31.8mm (LOW MILES Near Mint+)

Clean 10sp front derailleur, with the dark grey stylings of the last 10 speed generation. Condition Barely used, only the slightest cage marks. Details Double 31.8mm

Shimano Dura Ace FD-7900 Front Derailleur: 10s - Braze On (EXC+)

Clean 10sp front derailleur, with the dark grey stylings of the last 10 speed generation. Condition Excellent or better lightly used shape. Slight cosmetic wear. Details Double Braze on

Shimano Dura Ace FD-7900 Front Derailleur: 10s - Braze On (Near Mint)

Clean 10sp front derailleur, with the dark grey stylings of the last 10 speed generation. Condition Near mint lightly used shape. Slight cosmetic wear. Details Double Braze on

Shimano Dura Ace RD-7900 Rear Derailleur: 10s - Grey (LOW MILES Near Mint+)

Smooth shifting and wild aesthetics from the last 10 speed Dura Ace rear mech.  Its weird to see the original H.R. Geiger Alien styled derailleur become "outdated" and affordable, but this is where we are in the world.   Condition Near...