Shifters

NOS Shimano XT M780 Left / Front Shifter Base Cap

Replacement oem basecap for your front SL-M780 Condition New old stock Details Front 

Shimano Ultegra ST-6510 STI Shifters: 2x9 Double

These are the last version of the 9 speed Ultegra shifters.  The mechanical parts of these are EXACTLY like the Dura Ace 7700 9 speed shifters, just with a slightly different appearance.  Compatible with ANY Shimano 9 speed drivetrain...

NIB/NOS Shimano XT SL-M740 Gear Indicator: Front/Left - Screws

Did your XT M740 8 speed shifter have a busted or ugly gear indicator window?  This is a rare offering of a new replacement indicator plate with screws!  This was the best of the XT 8 speed shifters, and is worth restoring.  The M740 was...

NIB/NOS Shimano XT ST-M739 Gear Indicator: Left/Rear - Screws

Impossible to source replacement gear indicator w/ screws for both SL-m739 shifter pods and ST-M739 combos. Condition New old stock in sealed OEM package.  Details Front / Left only

Shimano Deore XT II SL-M732 REAR Thumb Shifter: 7 Speed SIS / Friction (Near Mint+ Low Miles)

Clean XT thumbie! These last generation XT shifters ran from 1989 to 1992, and Shimano went Rapidfire shifter only in catalogs in 1993. These were likely issued for a year or two after 1992 for bikes that desired thumbies.   Condition Near...

SRAM X7 9 Speed Front Shifter: Grey - Double or Triple

Nice mid level front/left trigger shifter from the 9s era. Condition: Great used shape with some light cosmetic wear Details: Front only Double or triple

Campagnolo Nuovo Record / GS Bar End Shifters: #1012/1013

1960's - 1980's Campy barcon shifters.  These have blue covers.  They were the only bar ends available in the era by Campy, so they came with any group that needed barcon shifters; Nuovo Record, Super Record, Gran Sport, Triomphe, Valentino.....

Campagnolo Nuovo/Super Record Porta-Catena Shifter Set: #1013/6 (Near Mint+ Low Miles)

This is a rare 1970's and early 1980's shifters from the Campagnolo Nuovo Record Porta-catena 1013/6 downtube shifter system.  It's largely a standard friction shifter, but the lever has a flip lever which shifts the derailleur onto the chain holder...

Campagnolo #1014 Nuovo Record Downtube Shifters: Clamp On - Black Cable Stops - Flat Plates/Screws (Near Mint)

Super clean clamp version of the NR/SR DT shifters of the 60's, 70's, and 80's.  These have the flat cover plates (part #603) and flat head screws, which were used up until the late 1970's. Condition Near mint lightly used shape. Only very minor...

Campagnolo Nuovo Gran Sport Downtube Shifters: #1014/1A - Clamp W/ Knurled Cone Nuts - 1974-1983 (Near Mint+ Low Miles)

In my opinion, these are the prettiest of all the vintage Campy shifters due to the gorgeous milled & domed end caps.  These were produced from 1974-1983. Lever blades are the same blades used on NR/SR.  Oddly enough, Campy didn't give the...

Right/Rear Thumb Shifter: Ratchet Friction - Klunker 1970's 1980's

These late 1970's to mid 1980's thumbies were used on Klunkers (they look a lot like the Suntour Mighty and Shimano EM shifters), and probably Schwinn Stingrays for the same reason.  They are ratcheting action, but not retro-friction...

NIB/NOS Suntour Barcon Rubber Lever Covers: #1246 (Sold In Pairs)

Restore your classic retrofriction bar end shifters to their former glory with minty fresh lever blade covers! These are made for the Suntour 3090 shifters, as well as the Suntour shifters rebranded as Raleigh, Schwinn Approved, etc. They'll probably...

NOS Shimano XT ST-M765 Dual Control 9 Speed Shifter / Hydraulic Disc Brake Set (Front Take-Off)

The Dual Control shifters were all the rage in the early 2000's, as Shimano brought essentially STI shifters from the road bike world to mountain bikes / hybrids.  Condition Rear is new in factory sealed inner plastic bag. Front is a new take-off...

Shimano Dura Ace SW-7971 Di1 10s Bar End Shifters + BL-TT79 TT Brake Levers: Carbon

Matching set of Dura Ace 7900 series Di2 bar end shifters and time trial brake levers. Condition Shifters are almost mint. I was told they work just fine, but I have no way to test them. Levers are excellent. Somehow the inside face of the left lever...

Shimano Deore II / DX SL-MT62 Thumb Shifters: 7 Speed (Barely Used Near MINT+++)

Smooth shifting and attractive 5/6/7 speed shifter from 1989 to 1993.  In 1989, they were listed as Deore II and in 1990 the same MT62 model became Deore DX. Very similar to the XT SL-M732, just with a different mounting bracket Condition Very...

NIB/NOS Shimano Bar End Shifter Body & Fixing Bolt Plug Set: Front/Rear - 8/9/10s - Dura Ace SL-BS77 / SL-BS78 / Ultegra SL-BS64

Do you have a working set of Shimano 8s, 9s, or 10s bar end shifters but you've scraped up the outsides of the bodies? This is your quick and cheap fix! These original bodies with fixing bolts and expanders will bolt directly to you levers for all 8 and...

NIB/NOS Campagnolo Athena Syncro II Downtube Shifters: 7 Speed Indexed / Friction Front

Fresh set of Campy Athena Syncro 2 indexed DT shifters, complete with original cables. Condition True untouched new old stock in retail packaging, pristine. Details Rear: 7 speed Front: friction

NIB/NOS Shimano 600/Ultegra Tri-Color SL-6400 Downtube Shifters: 6/7 Speed Indexed

The much loved 600/Ultegra Tri Color DT shifters.  Solid, reliable, affordable.  Difficult to find new! Condition Proper new old stock in retail box, pristine. Comes with everything that came in the box new, both curved and flat braze plates,...

Shimano Deore XT Deerhead SL-M700 REAR Thumb Shifter: Retrofriction - Early 1980's MTB

Untouched example of vintage thumbie from the 1983-1986 XT Deerhead M700 group, the first mountain bike specific group made.  Great for your early mountain bikes, as well as commuter setups with moustache/porteur/north roads bars...

Shimano Deore XT SL-M730 Thumb Shifters: 6 Speed SIS - Black

These were the first indexed thumbies in Shimano's lineup, and were a massive makeover from the previous friction-only XT Deerhead SL-M700.  They were introduced in 1987, and ran just two years before XT II SL-M732 7 speed came out...

Campagnolo Cambio Corsa Shifters + QR Skewer + Dropouts: 1940's 1950's -

The near mythical Cambio Corsa was Campagnolo's first ever derailleur/shifter gruppo from the 1940's to mid 1950's. The derailleur was made famous by Gino Bartalli and team Legnano in the 1948 Tour De France. It was both a masterpiece of engineering and...

SRAM XX 10 Speed Shifter Set: Front & Rear - 2x10 / 1x10 - Clamps (NEW)

Fresh first gen XX shifters for 10s drivetrains. Use these for your 2x10 bike, or use just the rear for your 1x bike. This one is from 2012. Condition: Brand new in box. Never mounted Details: Rear shifter: 10 speed Front shifter: 2...

OMAS Alloy Clamp Bolt & Nut for Campagnolo Front Derailleur / Shifter / Cable Guide: 2g (EXC+)

Rare high end upgrade clamp bolt and nut from O.M.A.S. circa 1960's, 1970's, 1980's. This is made for Campagnolo Nuovo Record, Super Record, Gran Sport, etc front derailleurs, cable guides, and clamp on shifters. It fits many other classic components...

Campagnolo #1014 Nuovo/Super Record Downtube Shifters: Clamp On - Black Cable Stops - Flat Plates/Screws (Mint, NOS Take Off?)

Super clean clamp version of the NR/SR DT shifters of the 60's, 70's, and 80's.  These have the flat cover plates (part #603) and flat head screws, which were used up until the late 1970's. Condition These look like they could be new old stock...

Shimano XTR ST-M950 8-speed Rapidfire Shifter / Brake Lever Combos (Near Mint)

Rare set of minty take off 8 speed XTR gunmetal grey shifters! The ST-M950 was made in 1996 and 1997, and in 1998 they released the ST-M951 (which was the same shifter but modified to work with the new SL-SS95 remote shifter). Condition Near mint...

1920's 1930's 1940's 1950's Derailleur & Shifter Parts LOT: Le Cyclo - Simplex Standard - Super Champion - Cables/housing/ferrules - Levers - French / English - Randonneur Racing

Big lot deal on derailleur & shift lever parts from England and France circa 1920's, 1930's, 1940's, 1950's. Highlights include: Mystery derailleur (does anyone recognize this?) Simplex Standard rear derailleur (complete, worn pulleys) Two Le...

1930's 1940's 1950's Shifter Parts LOT: Simplex JUY / Standard - Le Cyclo - Benelux - French / English - Randonneur Racing

Big lot deal on shift lever parts from England and France circa 1920's, 1930's, 1940's, 1950's. Highlights include two caps/covers for Simplex JUY 59 & Tour De France shifters & derailleurs, several Simplex Standard shifter covers, lots of...

Cyclo Benelux Twin Downtube Shifters: Huret Clamp - WingNuts - 1950's 1960's

Clamp on downtube shifters from the British branch of Cyclo, but with a Huret clamp.  Upgraded wing nut tension bolts! Condition Face caps and wing bolts near mint. Levers average shape, clamp great shape with a bit of wear. Details Made in...

Cyclo Standard Rear Derailleur + Shifter + Cables: 1940's 1950's - C Hanger - English (Near Mint)

Introduced in 1932 as the British version of the French "Le Cyclo". The two of them basically ruled all the lands as of the cyclotourisme realm until the 1940's. It is a loop cable / Twin-Cable type, and is "neutral normal" meaning there is no spring...

NOS Simplex #1146 Wing Nut For Double Shifters: Steel Plated Bronze - 1940's 1950's

Wingnut screw for 1930's, 1940's, and 1950's braze on shifters. These were found most often on the higher end models such as JUY and Tour De France, lower end models often had simple flat head screws. Condition New old stock Details Part number...

Simplex #843 Wing Nut Screw For Single Shifters: Steel Plated Bronze - 1940's 1950's

Wingnut screw for 1930's, 1940's, and 1950's braze on shifters. These were found most often on the higher end models such as JUY and Tour De France, lower end models often had simple flat head screws. Condition Excellent lightly used shape. Some chrome...

Simplex JUY 543 Shifter Faceplate / Friction Adjustment Knob: Part #1446 - "Dijon" -(NOS or Lightly Used

Rare faceplate knob for the legendary plunger-type Simplex JUY 543 rear derailleur's shifter, circa 1955-1959. This part doesn't just look pretty, it adjusts the tightness of the friction mechanism of the shifter.  Dijon is referring to not the...

Simplex Campione Del Mondo Shifter: Clamp - Barrel Adjuster - 1930's 1940's French

Clamp on shifter that came with the Campione del Mondo. It is very similar to shifters from other derailleurs from the 1930's and 1940's, largely the difference from most models that are not twin-cable is the Campione Del Mondo name on the face plate...

Simplex Rigidex 35 Bell Crank Rear Derailleur: 1930's 1940's French

A Type Rigidex 35 version of the Route Leger bell crank derailleur The back of the cage on this one doesn't mark speeds or chain width but via measurements I can ascertain its a 4 speed, 1/8" version Condition Average used shape. Smooth pulleys...

Simplex Route Leger Monobloc Bell Crank Rear Derailleur + Shifter: 1/8" - 1930's 1940's French

This derailleur was fairly similar to the Le Cyclo & Cyclo standard rear derailleurs, consisting largely of a cage with two pulleys, a bell crank, and a chainstay clamp. According to Velobase this version is called "Monobloc" which I could guess...

Simplex Route Leger Monobloc Bell Crank Rear Derailleur + Shifter: 3V - 3/32" - 1930's 1940's French (EXC)

This derailleur was fairly similar to the Le Cyclo & Cyclo standard rear derailleurs, consisting largely of a cage with two pulleys, a bell crank, and a chainstay clamp. According to Velobase this version is called "Monobloc" which I could guess...

Le Cyclo Rear Derailleur / Claw Mount / Cables: 1920's-1940's French Randonneur

Introduced in 1923, the "Le Cyclo" basically ruled all the lands as of the cyclotourisme realm until the 1940's. It is a loop cable type, and is "neutral normal" meaning there is no spring tension on the derailleur in either direction. They were...

Le Cyclo Rear Derailleur / Shifter/ / Spring / Claw Mount / Cables: 1920's-1940's French Randonneur

Introduced in 1923, the "Le Cyclo" basically ruled all the lands as of the cyclotourisme realm until the 1940's. It is a loop cable type, and is "neutral normal" meaning there is no spring tension on the derailleur in either direction. They were...

SRAM Rival 22 Flat Mount Hydraulic Disc Brake + REAR 11s Shifter / 1800mm Hose (NEW)

Right side 11 speed brifter with flat mount hydraulic brake from the Rival groupset. This is compatible with both 1x and 2x drivetrains! Condition New in open box Details Model: SB-RIV-HRD-A1 RIGHT / REAR shifter and brake MSRP: $330

Campagnolo Nuovo Gran Sport Downtube Shifters: #1014/1 - 1974-1983 - Twin Downtube Clamp - Knurled Nuts (Near Mint)

In my opinion, these are the prettiest of all the vintage Campy shifters due to the gorgeous milled & domed end caps.  These were produced from 1974-1983. Lever blades are the same blades used on NR/SR.  Oddly enough, Campy didn't give the...

Shimano Deore XT SL-M730 Thumb Shifters: 6 Speed SIS - Black (EXC)

These were the first indexed thumbies in Shimano's lineup, and were a massive makeover from the previous friction-only XT Deerhead SL-M700.  They were introduced in 1987, and ran just two years before XT II SL-M732 7 speed came out...

NOS Campagnolo #610 Downtube Shifter Clamp + Bolt & Nut #776/#777

Unused clamp adapter to mount your downtube shifters on frames without braze on mounts, plus pristine bolt and nut set.  This bolt/nut set is also used for NR/SR front derailleur clamps Condition New old stock, pristine

Campagnolo #1014 Nuovo/Super Record Downtube Shifters: Clamp On - Black Cable Stops - Flat Plate s (Near Mint)

Super clean clamp version of the NR/SR DT shifters of the 60's, 70's, and 80's.  These have the flat cover plates (part #603) and flat head screws, which were used up until the late 1970's. Condition Near mint with low miles. Very slight wear,...

NIB/NOS Campagnolo #1014 Nuovo/Super Record Downtube Shifters: Clamp On - No Cable Stops

Super clean clamp version of the NR/SR DT shifters of the 60's, 70's, and 80's. Condition New old stock, never installed.  No cable marks in slots, clamp band appears to have never been bent around a tube.  The levers move very smoothly and...

NOS Campagnolo EC-RE113 Index Ratchet Ring: RIGHT 9 Speed Record & Chorus - Non-Recessed

OEM indexing shift disc for your early 9 speed Ergo shifter Condition New old stock Details Right/Rear Non-recessed *I do not have much knowledge on Ergopower brifter internals, and will not be able to answer compatibility questions well

Campagnolo Chorus Carbon 10 Speed ErgoPower Shifters: Triple/Double - ErgoBrain Computer (MINT Low Miles)

Fresh ErgoPower shifters from the first 10 speed Chorus carbon gruppo, plus an Ergo-Brain computer.  Tough to find in triple! The Ergobrain is Campy's version of Shimano Flightdeck, but better! It shows you which chainring/cog combo you're in,...

SRAM Grip Shift SRT 800X-11 X-Ray Twist Shifters: ODI Yeti Grips - 8 Speed - 3x8 - 1990's (Near Mint)

Rare top shelf SRT-800 XRAY Gripshifters for 1990's retro mtb builds! This is a barely used set, complete with original manual and sealed packet of Grip Shift SRT Series Grease.  These have ODI Yeti grip covers in translucent. Condition Near mint...

NIB/NOS Cambio Rino Top Mount Downtube Shifters: 1980's Aero - Friction

Top mount braze on shifters from Italian company Cambio Rino. Condition New old stock in original bag. Slight shop wear Details Friction Silver  alloy