1990's 26" Rigid Steel MTB Fork: 1" Threaded - Cantilever - Fender Eyelets - Straight Blade - Unicrown (Near Mint LOW Miles)

This 26 inch vintage mountain bike fork was taken off a vintage late 1980's to early 1990's mtb.  It seems like a pretty nice model and was probably off a mid to top level hardtail. Condition Very close to mint and barely used.  It looks like...

IRO / Formula Track Flip Flop Hubset: 32H x 120mm - High Flange - Fixed/Fixed - Black (New + Shop Wear)

Gorgeous, affordable, and smooth pista, singlespeed, or fixed gear hubs.  These were made by Formula for IRO.  The rear is fixed/fixed, meaning you can run a different sized fixed cog & lockring on each side. The bearings on these are high...

All City Flip Flop Track Hub: Rear - 32H x 130mm - Fixed/Free - Bolt On (NEW)

Great for track bikes, singlespeeds, and fixed gears.  Axles are secured with beefy nuts, and no QR's!     130mm spacing fits modern road bikes & many singlespeeds.  fixed/free, and has one side threaded for a single speed...

Origin8 Flip Flop Track Hub: Rear - 36H x 120mm - Fixed/Free - Bolt On (NEW)

Great for track bikes, singlespeeds, and fixed gears.  Axles are secured with beefy nuts, and no QR's!     120mm spacing fits many track bikes, older 3 speed's and singlespeeds.  fixed/free, and has one side threaded for a...

MKS Custom Nuevo Wide NJS Track Pedals: Black/Silver (New take off)

These are MKS's top level classic design pista pedals, and they are gorgeous! Their general form is similar to the revered Superbe Pro and C-Record from the 1990's.  Sealed bearings, highly polished bodies, and replaceable cages make these a top...

NOS/NIB Salsa Tooth Fairy Triple Bash Guard: 104mm BCD x 44t Max

This chainring guard is designed to fit on the outside of a triple chainring's big ring.  Yes, you can have three chainrings and a bash guard with this or just use it as a standard bash ring replacing your outer ring!  You will need longer than...

NOS/NIB Salsa Ring Dinger Bash Guard: 94mm BCD x 36t Max

Great mountain bike bash ring, from Salsa.  These are often found on Surly Pugsley fat bikes, but are equally great on mtb's, cyclocross bikes singlespeed / fixies, and commuters. Condition New in retail packaging. Details BCD: 94mm 4 bolt...

NOS/NIB Salsa Ring Dinger Bash Guard: 104mm BCD x 36t Max

Great mountain bike bash ring, from Salsa.  These are often found on Surly Pugsley fat bikes, but are equally great on mtb's, cyclocross bikes singlespeed / fixies, and commuters. Condition New in retail packaging. Details BCD: 104mm 4...

XL Seatpost Binder Bolt: 22mm I.D. - Chrome (NEW)

Attractive chrome logo seatpost binder bolts for any classic or modern road bike. Condition New Details Chrome Inside diameter (between lips): 22mm

NOS Sugino Seatpost Binder Bolt: 19mm - Chrome

Attractive chrome Sugino logo seatpost binder bolts for any classic road bike. Condition New old stock. Details Chrome Inside diameter (between lips): 19mm

Sugino Mighty Competition Track/Pista Chainring: 47t x 144mm x 1/8" (Near Mint Low Miles))

Competition style 144mm big chainring from the Sugino Mighty line circa 1970's and 1980's. Condition Barely used show bike worthy shape. The only real signs of use are the grease between teeth Details Teeth: 47t Thickness: 1/8" BCD:...

Surly Ultra NEW Flip Flop Rear Hub: 36H x 135mm - Fixed/Free - QR & Bolt On - Silver (Near Mint)

Solid and affordable hub for your singlespeed, fixie, or track bike! This is compatible with both the included stainless steel axle bolts and quick release (not included). Condition Near mint or better.  Bearings feel perfect.  Only wear to...

Shimano Dura Ace AX HP-7200 NJS Top Nut - Fits 600 EX HP-6200 (Near Mint)

NJS stamped DA AX top nut for your road or track bike! Condition Near mint or better!  Very light wrench flat marks

Campagnolo Sportman Solid Axle Hubset: 36H x 120mm - 68mm Mid Flange - Round Holes - Polished Alloy Shells - Huret Wingnuts (Near Mint+)

These gorgeous early 1960's (or possibly very late 1950's) hubs are a throwback to an even earlier era before Tullio Campagnolo's quick release skewer became commonplace.  These feature solid axles, and Huret wingnuts.  These would be killer on...

Vintage Silca Super Pista Floor Pump: Wooden Handle - Brass Head & Nut - Yellow Vertical Logo (EXC+ Works Perfectly)

The SuperPista was Silca's flagship floor pump throughout the decades.  This one is from the 1980's or maybe 1990's.  They switched from foil decals to vertical logos in about 1980, and at some point in the 90's they switched to the three-point...

NOS Campagnolo Aero Toe Clips: Small(?) - Steel - Shield Logo - C-Record / Croce D' Aune / Chorus / Athena / Victory / Triomphe

These aero toe clips fit all Campy aero toe clips that are vaguely triangle/delta shaped.  These clips attach via two bolts that run front to back on the pedal, vs the usual horizontal plate that mounts to a pedal cage plate. Condition New old...

SRAM PC-58 Chain: 5/6/7/8 Speed - Master Link (NEW)

Affordable chain for you 5 speed, 6 speed, 7 speed, and 8 speed drivetrains.   Condition New in box  

SRAM PC-48 Chain: 5/6/7/8 Speed (NEW)

Affordable chain for you 5 speed, 6 speed, 7 speed, and 8 speed drivetrains.   Condition New in box  

Campagnolo C-Record Pista Pedals: Black Cages - PD-02RE Road/Track (Tail Broken, Near Mint Otherwise)

***The right pedal's forward cage plate's strap loop has broken off.  The breaks have been rounded for safety.  This isn't an issue if you don't run toe straps, just cut off the remaining strap loop.  Also, luckily the plates are...

Nitto S65 Crystal Fellow Seatpost: 27.2mm x 300mm (NEW)

Nitto's S-65 is their top of the line seatpost.  Gorgeous and simple design, satiny polished finish.  Great for classic lugged steel road bikes and modern steeds alike.  This is the long version, at 300mm Condition New in box, modern...

Phil Wood Rear Track Hub Shell: High Flange - 36H - Silver - Single (NEW)

Fresh track hub shell, sans any hardware.  This is for the Track Classic high flange, single sided (not flip flop).  We have two of these.  The first one that gets ordered will come with one bearing pressed in. Condition  New, never...

Selle Italia Superleggera Suede Saddle: Alloy Rails - Vintage 1970's Pre-Turbo - Unicanitor Competition - Brown (Near Mint++)

This rare 1970's saddle was Selle Italia's top racing saddle in the 1970's, before the venerable Turbo was introduced in 1980.  It's close models are the Record and Sprint, which both had steel rails.  This one features alloy rails, and weighs...

NIB/NOS Tange Levin Professional NL 500 Threaded 1" Headset: Chrome Steel - ISO - 27mm

The Professional is one of Tange's top level headsets.  It's gorgeous, and a great alternative to a Nuovo Record or Suntour Superbe Pro.  From the 1980's to early 1990's. Condition True new old stock in retail box, pristine.  The wax...

White Industries ENO Rear Hub: 36H x 122.5mm (Respaced, fits 120mm & 126mm Frames) Black - SS/Fixie/Track (MINT)

This ENO hub was custom spaced with White Industries parts to 122.5mm.  This size is designed to fit both 120mm and 126mm frames.  These only come in 130mm and 135mm, making this a pretty unique piece!  Great for retrofitting your old...

Shimano Dura Ace Track Chainring: 51t x 144mm - 1/8" - 7600 / 7710 - Black (Almost NOS)

Lovely track/pista  / fixie / SS chainring from the Dura Ace FC-7600 and FC-7710 cranks.  Hard to find black version! Condition Very close to new.  It looks like it's seen a chain, but for only a few laps.  The only wear is the...

Shimano Dura Ace NJS Track Chainring: 51t x 144mm - 1/8" - 7600 / 7710 - Silver (EXC+)

Lovely track / fixie / SS chainring from the Dura Ace FC-7600 and FC-7710 cranks. Condition Excellent or better lightly used shape.  Some light microscratches, almost no tooth wear. Most of it's life left  Details 51t BCD: 144mm Width:...

NIB/NOS Avocet Bottle Cage: Lavender Pink/Purple - Vintage 1980's

This rare Italian made bottle cage from the 80's and early 1990's is finished with a brilliant lavender paint.  The color tone is right between purple and pink, depending on your perspective.  It's guaranteed to give your bike a little more...

Kool Stop Continental Brake Pads: TWO PAIRS - Skyway Tuff Mags & Urban Bikes - Skyway Orange (Set of 4)

These pads are a newer rendition of the Continental pads, designed to be a reproduction of Skyway TUFF pads.  They are available in colors to match ACS Skyway Tuff Mag wheels. These are Skyway "Orange".  They are brighter and more true orange...

Barrel Adjuster O-Rings: Campagnolo / Suntour / Dura Ace - White/Red/Blue/Green

Did your Campy brake's barrel adjuster o-rings dry rot into oblivion?  These are your solution!  They're inexpensive, fit perfectly, and come in several colors.  The red is very similar (to the red found on Suntour Superbe brakes). ...

Custom TA Pro 5 Vis Drillium 50.2mm Outer Chainring Guard: 38t / 39t / 40t - Highly Polished (MINT)

This beautiful chainring guard was made from a NOS outer cyclotouriste chainring by Norther Cycles.  The teeth were cut off, the outer ring was precisely drilled, and the outer side was given an almost mirror-like polish.  This is ideal for any...

Velocity Deep V Rims: 700c x 32H - Polished (New, PAIR)

Legendary do-it-all rims.  These are killer for fixies, track bikes, road racing bikes, training bikes, etc. Condition New in factory plastic wrapping Details Size: 700c 32 hole Includes two rims (one pair) MSRP: $252 ($96/rim plus $30 for...

Nitto Craft B125 NJS Track / Keirin Handlebar: Chrome Steel - 40cm x 25.8mm (NEW)

These are the shallower drop version of the more common B123.  Chrome plated steel (the B125AA is alloy).  True NJS certification for Keirin racing! Condition New, no package Details 40mm wide  Clamp: 25.8mm to fit both 25.4mm and...

NOS Campagnolo C-Record Pista Low Flange Rear Hub: 28H x 120mm - FRENCH Threads - Bolt On

Super tough to find FRENCH threaded C-Record rear hub! Yes, this needs a French threaded cog and lockring.   Condition New old stock, absolutely pristine Details Spacing: 120mm 28 hole French threads: 34.7mm x 1mm Low flange Bolt...

NIB/NOS Suntour Superbe Pro Track Cog: HC-100 - 15t x 3/32"

The Suntour Superbe Pro HC-100 track cog is the premier cog choice for Japanese pista bikes (and most others excluding Campagnolo built bicycles).  Gorgeous flat black anodizing.  Great for fixed gear urban cyclists as well!  Inexpensive,...

NOS Vetta Transverse AT MTB / Road Saddle: 1990's - Black Leather - Vandium Rails

This 1995 dated saddle was marketed as mountain bike specific, and it's sleek lightweight form makes it appropriate for road bikes as well.  It's direct competition in the early 1990's was the Selle Italia Flite. Condition New old stock.  It...

NOS Fujita Seamless BS Uncovered Plastic Saddle: Made in Japan - Black w/ gold Foil Logo- BMX - Kierin

This Japanese 1970's and 1980's saddle is built with the same idea as the Italian Uni-Cantor; a plastic shell built on classic steel frame and rails with tension adjustment.  More commonly found are the leather covered versions of these.  The...

NOS Campagnolo C-Record Graphite Powergrade Brake Lever: Single - 3rd/4th Gen

This is a single C-Record PowerGrade brake lever in the increasingly rare "Graphite" finish.  The Graphite was a darker grey than the Century finish, which was only offered at the Record level. These were issued with both later generation Delta...

Specialties T.A. Chainring Guard: 6-Bolt Professional/Criterium - For 48T (Near Mint)

Rare outer chainring guard plate for T.A. Cyclotouriste, Criterium, and Professional chainrings with a 6 bolt 152mm drilling.  These were originally intended for cyclocross, but are great for townies, touring, etc. HERE is a set of bolts/spacers to...

NIB/NOS Suntour Superbe Pro Track Cog: HC-100 - 14t/15t/16t - 3/32"

The Suntour Superbe Pro HC-100 track cog is the premier cog choice for Japanese pista bikes (and most others excluding Campagnolo built bicycles).  Gorgeous flat black anodizing.  Great for fixed gear urban cyclists as well!  Inexpensive,...

Custom Painted Flat Handlebar: Black & White Textured Splash Effect - 610mm x 25.4mm (NEW)

Super rad custom painted steel handlebars! The pattern is highly intricate and has a textured look.  Great for cruisers, fixies, early mountain bikes from when steel bars were the norm, etc Condition New Details Clamp: 25.4mm Width: 610mm uncut...

Euro Asia Imports Deluxe Track Cog: 14t - 1/8" - Black (New)

Very nice USA made single speed / fixie / pista cog from Euro-Asia Imports. Condition New Details 18 tooth 1/8" width Threads: ISO MSRP: $48

NEW Timbuk2 Commute Briefcase Messenger: Black - Large Back Pocket - 17"

This must be an out of production model, as it doesn't match anything on their website.  From the front it appears only slightly different than the classic messenger, but closer examination reveals a robust top handle and a full width zip pocket on...

Timbuk2 Classic Commuter Messenger Bag: L / XL Deep - Black (Used)

This classic messenger in black and an extra large size.  Bargain priced. Condition Great used shape with a few issues.  The outside of the bag and flap are near mint with barely a mark.  There's a 2" hole in one of the interior pockets,...

Timbuk2 Designs Vintage Messenger Bag: 1990's - Small/Med - Red & Grey (EXC+)

Original retro 1990's messenger bag! These bags used a more cotton/canvas like softer outer material, where as modern Timbuk2 bags use a harder/thicker material.  This one is almost sling like, as it has a wide bottom but is only 17" wide...

NEW Timbuk2 Classic Commuter Messenger Bag: Large - Black - Waterproof Inner

Large solid black classic messenger! Condition New, no tags. *These bags are unsold inventory from an outdoors store.  There may be the slightest hints of wear from sitting around a store for some time, including lint bits in the velcro or a spot...

NEW Timbuk2 Classic Commuter Messenger Bag: XS - Blue & Grey - Waterproof Inner

Nice and understated dual-color Timbuk2 Classic Condition New, no tags. *These bags are unsold inventory from an outdoors store.  There may be the slightest hints of wear from sitting around a store for some time, including lint bits in the...

Christophe Toe Clip Mounting Hardware: Plates & Bolts (NIB/NOS Pair)

High quality OEM toe clip mounting hardware that comes with Christophe toe clips.  Included is a two mounting plates that go between the toe clip and the pedal cage, four mounting bolts and nuts. Enough for one set of pedals, works with all standard...

130mm BCD Chainring Guard: Black - 44t max - Black (near mint)

Minimalistic and stylish chainring guard / bash ring for a 130mm BCD road crank.   Condition Near mint, only very light marks Details BCD: 130mm Black