SUSPENSION

NIB/NOS 1996 Manitou Fork Die Cast Seal & Bushing Kit: #85-3611 - EFC - Mach 5 - SX -

Set of bushings and oil seals for 1996 EFC, SX, and Mach 5 forks. May work for other years/models, do your research. Condition New in sealed Retail packaging. Everything appears in great shape. Details Model: 85-3611

Cane Creek Helm Air MKII 27.5 Fork: 100mm (adjustable) Boost 15x110mm - Tapered (NEW)

The Helm Mark-II is an air-sprung trail/enduro fork with up to 170mm of travel (This one comes set at 100mm for dirt jump and rough XC applications), 35mm stanchions (same as a RockShox Lyrik/Pike/Yari), a 15x110mm Boost axle, and a tapered (1.125-inch...

2012 Fox Float RP23 Factory Series Kashima Rear Shock: 7.785" Boost Valve - Adaptive Logic (Near Mint)

The last and best year of the iconic 2000's era RP23 with the addition of Kashiman coating and Adaptive logic. This was Fox's top of the line rear shock in 2012, before it was replaced by the CTD in 2013.  Many people prefer these over the CTD's,...

Fox Float DPX2 EVOL Rear Shock: Trunnion 205mm x 57.5mm (New Take-Off)

Trunnion mount version of the Float DPX2 from 2021. Condition Take off from a new bike with only a couple test rides. There's one tiny ~3mm wear spot on a decal. Details Trunnion mount, 204x57.5mm Part number: 973-06-058 Description via Tune Code...

Custom RockShox Argyle RCT / Pike DJ 26" Fork: 1 1/8" x 100mm - Disc (NEW)

This gorgeous fork is a bit of a mystery. It is a 2013 Argyle RCT Solo Air, but it has Pike DJ decals. The colors are stock for the Argyle, but the Argyle was always all one color. Someone either combined a CFO orange Argyle crown with Toxic Moss Green...

Manitou One Suspension Fork (M1): 1 1/8" Threaded - FRESH REBUILD (Near Mint)

Very clean example of an early Manitou fork, the first released after Answer bought Manitou.  It is largely the same as the Doug Bradbury Manitou fork of 1991, but adds offset fork ends as well as Answer logos. It was rebuilt by the previous owner...

Rockshox BoXXer World Cup 26" Fork: 26" - Solo Air (NEW)

Legendary downhill double fork in 26" format with the Charger damper. Condition New in box. All hardware and manual in factory bag. Details 26 inch Travel: 200mm Model numbers: FS-BXR-WC-B1, 00.4018.784.003 MSRP: $1700

FOX Fork 32 FLOAT NA 2 Air Shaft Assembly: 26" & 27.5" - 150mm 1.110" Bore - #820-02-341-KIT

Air shaft assembly for Fox 32 Float forks. Condition New in OEM package Details Part number: 820-02-341-KIT MSRP: $70

Cane Creek Helm Fork Decals Kit: MKI - Pink / Black (NEW)

Hard to find decals from the original Cane Creek Helm Air and Coil forks. This version was issued in 2017, 2018, 2019, and 2020. MKII came out in late 2020 with different decals.  These are totally fine on the second gens too...

Cane Creek Helm Fork Decals Kit: MKI - Gold / Black (NEW)

Hard to find decals from the original Cane Creek Helm Air and Coil forks. This version was issued in 2017, 2018, 2019, and 2020. MKII came out in late 2020 with different decals.  These are totally fine on the second gens too...

Rockshox Poploc Remote Lockout Lever + Spool & Cable Clamp (Near Mint)

Poploc remote lever for various Rockshox forks. Includes cable/housing. Condition Near mint lightly used shape Details  

Fox 32 F29 FIT RL Fork: 100mm - 15QR x 100mm Thru Axle - Black (EXC+)

Top level XC/Trail MTB 29er fork from fox!   Condition Excellent or better lightly used shape. It works very well with no leaks or issues. Minimal cosmetic wear, the only one worth mentioning is a paint chip at the top of the driveside leg...

Cannondale Lefty DownLow Damper: 160mm

Replacement Lefty Down Low damper in 160mm. Condition This came as new dead stock from a shop, but there's a little grease on the end and thus I can't be sure if it's new or not. Enjoy the low price, but this is sold AS-IS.

Marzocchi Bomber Z1 Suspension Fork Spring Kit - Extra Firm - 2021

Service kit for your Z1! Condition New Details Extra firm

NOS Rockshox Boxxer LEFT Fork Decal / Nameplate: ORIGINAL 2003-2004 (Non-Driveside Only, Sold Individually)

These are ORIGINAL Rockshox-produced hard stick-on logo plates that came on ~2003-2004 Boxxer DH forks.  Peel off the wax paper backing and stick them on your fork leg, and your Boxxer will look good as new! (well, they're not magic.  They...

EXT Spring Coil: 140 x 350mm (Near Mint+ Barely Used)

High end coil from EXT Condition Near mint or better barely used shape. Very minimal miles and marks Details 140x350mm

EXT Spring Coil: 117 x 375mm (Near Mint Low Miles)

High end coil from EXT Condition Near mint lightly used shape. Very minimal miles and marks Details 117x375mm

EXT Spring Coil: 117 x 350mm (Near Mint+ Barely Used)

High end coil from EXT Condition Near mint or better barely used shape. Very minimal miles and marks Details 117x350mm

26" Fox 32 F-Series Fork: 80mm - 1 1/8" - Disc/V-Brake (Needs Rebuild)

Bargain on a 26" Fox F-Series XC fork that has been "Pushed" due to an issue where you compress the fork once and it feels great and the next push only moves a bit and feels like it has a lockout on. Compatible with both disc brakes and...

Ballistic Fork Decal / Sticker: Metallic! 1990's - 2" x 2" - Rad Space Ship Logo! (RARE)

Scarce original sticker from Ballistic forks.  Even if you don't know Ballistic, this is just a really rad sticker!  The logo is a spaceship over a planet with a "Ballistic" banner over it all. And its glittery! Condition NOS,...

NOS Rockshox Judy / Ruby Spring Spacer For 80mm Travel: 430-001310-01 (Pair)

This is a pair of NOS spring spacers for ~1998-2002 Rockshox Judy and Ruby forks using 80mm travel.  Check this manual to determine this is for your year and model Condition New old stock Details Sold in pairs Part...

Rockshox Judy 28mm Stanchion Guide & Retainer: 430-001186-00 (Pair)

This is a set of NOS uppers shaft/stanchion guide and retainer for 28mm stanchions of the Judy and other models.  The guide fits at the top of the stanchion and the retainer at bottom.  Check this manual to determine if this is for...

NIB/NOS Rockshox Rear Shock Pivot Mount Spacer: 8mm x 50mm - 1997-2002+

Mounting hardware pivot for rear shocks Condition New in OEM packaging Details Part number: 11-4308-264-000

X-Fusion Suspension Service Pack Rebuild Kit: 42-VTDH-Dmp-601 (2004 to 2006)

Seal rebuild kit for X-Fusion suspension from 2004-2006. Unknown what models these work for. Condition New in retail package Details Model 42-VTRDH-Dmp-601

X-Fusion Suspension Service Pack Rebuild Kit: 42-VTRPV-Dmp-601 (2004 to 2006)

Seal rebuild kit for X-Fusion suspension from 2004-2006. Unknown what models these work for. Condition New in retail package Details Model 42-VTRPV-Dmp-601

NOS/NIB Manitou Carbon Steer Tube Plug: Mars - X Vert - BMX Carbon/Pro/Mag

This plug is required to upgrade to a carbon fiber steerer on early 2000's Manitou forks Condition New in oem bag, with manual Fits year 2000 forks, including: Mars C, Mars CL, Mars 1 X-Vert Super Answer BMX Carbon Pro / Pro Cruiser Answer BMX...

Rockshox Fork Decals: ORIGINAL 1990's to Early 2000's! SID - Judy - Psylo - Boxxer - Indy (Set of 5)

These are ORIGINAL Rockshox-produced decals, that go on the front of each fork leg of virtually all Rock Shox forks from the late 1990's to mid 2000's.  This set of 5 decals is enough for two forks, and put the third one on your bike, shock, or...

Rockshox Rear Shock Mounting Hardware / Reducers (Bulk Pricing Available)

Cheapest price on the web for a huge selection of sized rear shock eyelet reducers.  These are genuine Rockshox parts from the early 2000's. The first number (M6 or M8) refers to the bolt diameter. The 2nd number refers to the frame mount internal...