Road Bike Cranks

Shimano 105 10s / 12s Mini Groupset: FC-R7100 + 5700 (RD, FH, CS)

Random lil group of four Shimano 105 parts. This is mostly 5700 10 speed parts plus a 12 speed R7100 crank. Condition 5700 parts are near mint with low miles. Crank is excellent but has a smattering of tiny cosmetic ano marks. Details Crank: FC-R7100,...

Shimano Dura Ace FC-7900 Crankset: 172.5mm - 53/39t (EXC+)

The last 10 speed Dura Ace crank with its alien-like aesthetics propelled the DA group into the modern era Condition Excellent to near mint lightly used shape.  Light wear scattered throughout, the most significant being light heel rub on the drive...

Shimano Dura Ace FC-7700 53 & 39t Chainrings + Ultegra FC-6500 Crank (Barely Used Near Mint+)

This is a nearly NOS set of Dura Ace 9s 7700 chainrings in 53t & 39t with a bonus Ultegra 6500 crank. 9 Speed Ultegra cranks are awesome for your early to mid 2000's high end road bikes.  They are highly regarded for their low weight and...

NIB/NOS Sugino 75 NJS Track/Pista Crankset: 165mm x 49t Chainring - Vintage 1980's

The famous first version of Sugino 75 crank from the mid 1980's! This is essentially the vintage version of the modern SG75 crank, and I'm not sure there are any differences past date codes. These are common in Japan but quite rare in the US. This one...

Campagnolo Record 10s Ultra-Torque Carbon Crankset: 172.5mm x 53/39t - FC7-RE (Near Mint)

Rare 2007-2008 10 speed Record Ultra Torque carbon crankset. The Ultra Torque system was introduced in 2007 and they switched to 11 speed gruppos in 2009, meaning this crank was only made for two years. It is functionally VERY similar to the 11s crank,...

White Industries VBC Square Taper Road Crank: 165mm x 52/38t (Near Mint+ LOW MILES)

Gorgeous White Industries Square Taper Road Crank (Previously named VBC, for Variable Bolt Circle but now the rings are available for 30mm).  The outer ring features five elongated windows, allowing any BCD inner chainring to be used.  It's...

SRAM S950 S-Series Carbon Crankset: 170mm x 53/39t Double - GXP - 3-Bolt Direct Mount (LOW Miles Near Mint+)

High end S-Series carbon crank with 3-bolt direct mount to fit a wide array of direct mount chainrings and spiders, as well as Quarq power meter spiders. Comes with an alloy 130mm spider and 53t / 39t Powerglide chainrings Condition Near mint or better...

TA Pro 5 Vis Cyclotouriste Crankset: Capped Pedal Holes Early Version - 170mm x 54/44T Double - French (Near Mint+ Low Miles)

Very clean early version that features the closed pedal holes, with the little "cap" with a hole in it over the back sides.  The very earliest versions had different flutes and little engraved logos near the dust caps, and these were after those...

FSA VERO RPM Double Road Crank Arms: 175mm x 130mm - CK-400 - Square Taper - Silver (Near Mint+)

Affordable and attractive road double crank arms. Condition Near mint or better very lightly used shape. Very minimal marks. Details 175mm BCD: 130mm Standard double  

Campagnolo Record 10 Speed Crankset: Square Taper - 175mm x 53/39t - Silver/Alloy - FC02-RE (Near Mint)

Early to mid 2000's crank, from the 10 speed era.  These were the last of the classic looking and square taper Campy cranks, and they were awesome components!  Condition Near mint lightly used shape. Minimal wear. Only a few stray small marks...

Campagnolo Record 10 Speed Crankset: Square Taper - 172.5mm x 53/39t - Silver/Alloy - FC02-RE

Early to mid 2000's crank, from the 10 speed era.  These were the last of the classic looking and square taper Campy cranks, and they were awesome components! Original coated chainrings. Condition Great used shape with light cosmetic wear. Arm...

Campagnolo Centaur 10 Speed Crankset: Square Taper - 175mm x 53/39t - Silver (Near Mint Low Miles)

10 speed Centaur crank, the last one with square tapers and classic styling.  Remarkably similar to the Chorus. Condition Near mint with low miles. Quite minimal wear. Arm ends have the slightest scrapes on their bottom edges (non-driveside arm...

Ionic Billy / B2 Bomber 1x Crank Arms: CNC Machined Rarity! 172.5mm x 130mm - Black & Gold - 1990's/2000's (Near Mint++ LOW MILES)

Absurdly rare road/track/singlespeed anodized & CNC machined crankset from Ionic circa late 1990's or very early 2000's. Ionic was a very small framebuilder in Boise, Idaho most famous for their Ionic Johnny Rotten hardtail mtb and the mountain bike...

A. Duprat Maxiplume Crank Arm: Driveside - 50.4mm - 170mm - Cottered - French 1930's 1940's 1950's - Chrome

Extremely rare orphaned drive side crank arm from Andre Duprat, circa pre-war and into the 1950's. Duprat is perhaps most known for their nickel plated hollow steel cranks that were nearly as light as alloy cranks of the era and vastly stronger...

White Industries G30 Gravel Crankset: 170mm x 46t Boost - Black (Near Mint+ Low Miles)

The G30 gravel crank is a combination of the M30 "mountain" crank arms with the Road/Gravel spindle. Included here is everything you need except BB cups! Arms, chainring, Spindle, crank bolts, extractors, adjusting collar, and chainring lockring...

NIB/NOS Campagnolo Chorus 1st Gen Crankset: #706/101 - 167.5mm x 52/42t - 1988

This rare crank is identified as a 1st generation Chorus crank (vs a Chorus RS, Croce d' Aune or Athena) by it's gently curving crank arms, as well as a prominent raised flat section around the flat dust caps.  All others of this style had flat arm...

Stronglight 49 Cyclotourist Crankset: 170mm - French - 1950's 1960's Early Model - Alloy Dust Caps

The model 49 / 49D crank was introduced in 1949 and ran until the 80's with only minor changes.  This very clean example is an early model from the late 1950's or 1960's. It's identified as such via the lack of any words on the back of the crank...

NIB/NOS Shimano 600/Ultegra FC-6400 Tri-Color Crank Arm: Left / Non-Driveside - 175mm

Fresh non-drive arm for your tri color 6400 crank in 175mm Condition New old stock in oem packaging, factory sealed. Presumed perfect Details 175mm arm left arm only Silver

Stronglight 63 SC Super Competition Crankset: 170mm x 52/45t - French (NEAR MINT+)

The rare Stronglight model 63 SC (Super Competition) was introduced in 1963 as an update to the 57 SC, their top of the line racing model. It's arm profile and double taper is similar to the 49D, but the SC line uses a star shaped 122mm integrated spider...

NIB/NOS Campagnolo #1049/A Super Record Driveside Crank Arm: 172.5mm - Non Fluted Laser-Etched 1985 (RARE)

Made only from 1985-1987, the no flute Campy Super Record crankset is rather rare.  C-Record had taken over popularity by then, and Campy continued selling their classic NR/SR until their stock ran out. They were making some of these parts a bit...

SRAM Quarq S975 CinQo Power Meter Crankset: 172.5mm x 53/39t Double- Carbon - GPX (EXC+)

Highly rated and originally very pricey powermeter crank.  It features SRAM's integrated carbon crank arms, SRAM RED chainrings, and a spider based powermeter.  Tool-less coin battery changes!  The chainrings are "10 speed", and they are...

Quarq Elsa 10R SRAM Red Power Meter Crankset: 170mm x 50/34t Compact - Carbon - GPX (Near Mint+ Low Miles)

Highly rated and originally very pricey powermeter crank.  It is a rebadged SRAM RED GPX Exogram crank and chainrings, with the Elsa powermeter integrated from the factory.  Tool-less coin battery changes!  The chainrings are "10...

Shimano GRX FC-RX810-1 Gravel Crankset: 1x 11s - 175mm x 40t (Near Mint+ Low Miles)

Popular gravel bike crank, with high stiffness and low weight.  These are great for your commuters with one-by setups, gravel / all-road bikes. Condition Near mint lightly used shape with relatively few miles.  No heel rub, the tiniest of...

Shimano Dura Ace FC-R9100 Crankset: 11s - 175mm - 53/39t Double (EXC+)

Beefy and super stiff 11 speed crank from Shimano. Condition Excellent or better lightly used shape. There is some obvious shoe rub near the BB spindle, but otherwise it's pretty clean.  Arm ends are near perfect.  Some very minor wear on...

Bianchi By Magistroni Cottered Crank: TA REF 173 Adapter & Old Logo TA 104/106 Chainrings: 3-Pin - Script Logo - Fluted + Cutouts - 170mm x 52/48/44t Triple

This scarce 1950's and 1960's crank was made by Magistroni (Curtis Odom told me this).  They are pretty unique, featuring double flutes on the arms, cutouts on the spider arms, and a scrolly Bianchi logo in place of the more common print type. ...

Cannondale Si BB30 Carbon Crankset: 175mm - Compact 50/34t (Near Mint+ Low Miles)

Tough to find ~2012 era version of the SI crank.  I can't figure out if these were the Hollowgram model or a separate model. Condition Near mint or better hardly used shape.  These have less than 300 miles, and the only real wear to note is...