Cranks

Shimano Dura Ace FC-9000 Double Crankset: 172.5mm x 53/39t - BB (Near New <50mi)

Top shelf practically new 11 speed era Dura Ace crankset and Hollowtech II bottom bracket! Condition Almost new with less than 50 miles on it.  The only real wear is light scratching below "URA" on driveside arm, slightest dirt between teeth, a...

Shimano Sante 7s Groupset: Crank / Derailleurs / Shifters / Brakes / Levers - 170mm x 53/42t (Mostly Low Miles EXC-Near Mint, Excluding Levers)

Rare Shimano Sante groupset from the late 1980's! This group was a high end semi-pro kit situated right below Dura Ace 7400 and above Shimano 600/Ultegra 6400. Its finish is a pearlescent white with gorgeous metallic logo and accents. Performance wise it...

NIB/NOS(*) Shimano Dura Ace FC-7400 Crankset + Bottom Bracket: 170mm 52/40t (Shop Wear, Installed once)

The 7400 crank is a favorite for 1980's high end road bikes with Japanese components.  These were made from 1984-1988. It is nearly identical to the later FC-7402, who's only difference is SLIGHTLY narrower spacing between the rings to accomodate 8...

Ride2 Tandem Crank Arm Shorteners: Wide - 9/16" (Near Mint or New)

Modern and more versatile alternative to Phil Wood crank shorteners! Condition These are either near mint barely used or possibly new. No real wear to note. Details Width: Wide, for modern cranks with wider arms Shortens cranks by 24, 41, 59 and...

White Industries ENO / Square Taper Road TSR 46t Chainring: Black (EXC)

White Industries chainring for their square taper ENO MTB crank arms or square taper road cranks. TSR (Tall Short Ring) version for 9-12 speed 1x drivetrains or singlespeed. TSR is their version of Narrow Wide. Condition Excellent used shape with some...

White Industries ENO / Square Taper Road 46t Chainring: Black (Near Mint+ Low Miles)

White Industries chainring for their square taper ENO MTB crank arms or square taper road cranks. Condition Near mint or better with low miles. Just slight ano wear between teeth. Details 46t Non-TSR (tall short)  

White Industries v1 VBC Inner Chainring: 30t - Black (Barely Used <50 Miles)

Variable Bolt Circle chainring set for MR30 & ENO square taper cranks. It is not compatible with VBC v2 outer rings. Condition Just barely used, less than 50 miles ridden.slightest ano wear in spots between the teeth. Very clean. Details 30t MSRP:...

Campagnolo Power-Torque Chainring Bolt Kit FC-AT300: Athena 2011 to 2014 (NEW)

Rare chainring bolt set for 2011-2014 Athena Powertorque cranks. Condition New in opened box, inner bag sealed    

Campagnolo Athena 11s FC-AT100 Chainring Bolt Set (NEW)

Athena 11 speed FC-AT100 bolts Condition New in sealed box Compatibility  

Campagnolo FC-SR300 Chainring Bolt Set: 4 Arm 11/12s (NEW)

Set of 8 screws for 4 arm 12s and 11s Campy crank arms. Condition First ordered new in sealed OEM bag, second ordered in sealed OEM bag Compatibility Fits 4 arm 11 and 12 speed cranksets

Campagnolo Super Record FC-SR200 Chainring Bolt Set: Double (NEW)

Torx bolts for various 11 anmd 12 speed cranks that the bolts screw directly into the crank arm (no nuts needed) Condition New in sealed OEM bag Compatibility 5 piece set - 4 chainring bolts and 1 hidden crank arm bolt (plus ring washer)

Campagnolo CX11 Inner Chainring: 36t Compact - FC-CX236 - Black (NEW)

Inner ring for Campy CX11 cranks using their proprietary 5 bolt 110mm bcd Condition New in box. Details 34t 110mm x 5 bolt (only fits Campagnolo 110mm cranks) Black / silver

Frejus Cottered Crank Arm: Non-Driveside - 170mm - BSA - Chrome (Near Mint++)

Clean example of a ~1950's or 1960's Frejus fluted crank arm. It could be either strada or pista.  Condition Near mint or better very lightly used condition. Slightest hint of pitting, very little actual wear. Details 170mm 9/16" BSA threads

Shimano 105 10s / 12s Mini Groupset: FC-R7100 + 5700 (RD, FH, CS)

Random lil group of four Shimano 105 parts. This is mostly 5700 10 speed parts plus a 12 speed R7100 crank. Condition 5700 parts are near mint with low miles. Crank is excellent but has a smattering of tiny cosmetic ano marks. Details Crank: FC-R7100,...

Shimano Dura Ace FC-7700 53 & 39t Chainrings + Ultegra FC-6500 Crank (Barely Used Near Mint+)

This is a nearly NOS set of Dura Ace 9s 7700 chainrings in 53t & 39t with a bonus Ultegra 6500 crank. 9 Speed Ultegra cranks are awesome for your early to mid 2000's high end road bikes.  They are highly regarded for their low weight and...

FSA Powerbox Aero TT Chainring: 55t x 130mm (New)

Super stiff and boldly styled chainring for time trial, triathlon, and singlespeed / fixed gear bikes. Sometimes the Powerbox model has FSA's "Vision" decals, this one is the main FSA line. Condition New in package, some shop wear. Details 55...

FSA Powerbox Aero TT Chainring: 54t x 130mm (NEW)

Super stiff and boldly styled chainring for time trial, triathlon, and singlespeed / fixed gear bikes. Sometimes the Powerbox model has FSA's "Vision" decals, this one is the main FSA line. Condition New in package, slightest shop wear Details 54...

Shimano GRX FC-RX810 1x Chainring: 42t - 11s (New Take-Off)

Narrow-wide chainring for 110mm asymmetrical Shimano cranks. Condition New, take off. Details 42t BCD: 110mm asymmetrical MSRP: $85

NOS BBG BashGuard: 40t x 104mm - Black Anodized - Vintage 1990's

Vintage bash guard from the 1990's and early 2000's! BBG is Badaracco Bash Guards, started in Portland Oregon by Michael Badaracco. This would be great for your retro mtb restoration or current rider! Condition New old stock, no package Details 40t x...

NIB/NOS Race Face Turbine 9 Speed Chainring: 42t x 104mm - Silver / Polished

Fresh outer Race Face Turbine ring from the 9sp mtb crank.  Condition New in package Details 42t x 104mm

Race Face Single N/W Narrow-Wide 1x Chainring: 36t x 104mm - Green (New)

Loud green chainring for your 1x drivetrain from Race Face. Condition New in package Details 36t

Snail Narrow-Wide Chainring: 34t x 104mm - 1x - Green (New)

Loud green chainring for your 1x drivetrain. Condition New in package

NOS Sakae SR Granny Inner Chainring: 24t x 74mm - No Pins/Ramps - Black Ano - 1980's 1990's - Suntour XC Pro

Fresh granny ring for your 110/74mm retro mtb or touring crank. These were made from the mid 1980's to mid 1990's. Sugino made most of Suntour's cranks and chainrings, and this is very similar to one generation of Suntour XC Pro chainrings just with SR...

Box One Oversized M35 Crankset: 177.5" X 104mm (New Take-Off)

All Box One and Two cranksets are engineered and crafted using our Oversized Technology. we all know that there is no use pushing hard on your pedals if you can’t deliver most of that power to the rear wheel. During the creation of our cranks, we...

White Industries v1 VBC 2x Chainring Set: MR30 - 50/34t Compact Double

Variable Bolt Circle chainring set for MARG30 30mm cranks. Condition Great used shape with some wear. Details 50t outer + 34t inner + hardware MSRP: $256 (rings + hardware) *Used cassettes & chainrings are sold as-is, and returns will not...

White Industries VBC Square Taper Road Crank: 165mm x 52/38t (Near Mint+ LOW MILES)

Gorgeous White Industries Square Taper Road Crank (Previously named VBC, for Variable Bolt Circle but now the rings are available for 30mm).  The outer ring features five elongated windows, allowing any BCD inner chainring to be used.  It's...

SRAM S950 S-Series Carbon Crankset: 170mm x 53/39t Double - GXP - 3-Bolt Direct Mount (LOW Miles Near Mint+)

High end S-Series carbon crank with 3-bolt direct mount to fit a wide array of direct mount chainrings and spiders, as well as Quarq power meter spiders. Comes with an alloy 130mm spider and 53t / 39t Powerglide chainrings Condition Near mint or better...

Custom Drillium Chainring: 54t x 144mm - Silver (Mint Low Miles or NOS)

Pretty custom drilled alloy chainring for 144mm cranks. Unknown make, but it sure is cool. Condition Either new old stock or mint barely used. Very minimal imperfections Details 54t BCD: 144mm

TA Pro 5 Vis Cyclotouriste Crankset: Capped Pedal Holes Early Version - 170mm x 54/44T Double - French (Near Mint+ Low Miles)

Very clean early version that features the closed pedal holes, with the little "cap" with a hole in it over the back sides.  The very earliest versions had different flutes and little engraved logos near the dust caps, and these were after those...

absoluteBLACK Premium Oval Road Chainring: 39t x 130mm 2x - Black (NEW)

Our Premium Shimano 130/5(bolt pattern) oval chainrings are designed for pre 2014 cranks like Shimano Dura-Ace FC7900, FC7800, Ultegra FC6700, Shimano 105 -5700 and many more. These are finest shift-able oval chainrings on the market. If your current...

absoluteBLACK Premium Oval Chainring PVD Rainbow: 34t - Shimano Dura Ace 9100 & Ultegra 8000 (NEW)

absoluteBLACK Premium Shimano 110/4 bcd compatible oval chainrings in PVD Rainbow (oil slick) color are designed for new type of Shimano cranks Dura-Ace 9100, Ultegra 8000 & 105 R7000. Super fast shifting and amazing smoothness of pedaling. (They can...

absoluteBLACK Oval Direct Mount N/W 34t Chainring Shimano XTR M9100 / XT / SLX / Deore: Red (NEW)

The Original one and only absoluteBLACK Premium Shimano 12spd Hyperglide+ compatible Direct mount 1X Oval chainrings are designed for XTR M9100, XT M8100, SLX M7100 & Deore M6100 cranks. Super smooth pedaling experience. This chainring is...

NIB/NOS Tioga MX-SPF Crank Spider: 5-Bolt - Silver

Rare 5 arm spider from old school bmx Tioga cranks. Condition New old stock in retail package    

NOS Shimano Crank Dust Caps: Push In - Grey Plastic (Sold in Pairs)

Affordable push in dust caps for square taper cranks. Condition New, some have the slightest shop wear Details Sold in pairs

Zeus 2000 / Supercronos Drillium Chainring: 45t x 119mm BCD (EXC+)

Pretty ring from the Zeus top level 2000 group as well as the aero Supercronos group. Condition Excellent or better lightly used shape. Minimal tooth wear, some light cosmetic wear. Details 45t BCD: 119mm 5-bolt  

NOS Zeus Criterium Chainring: 48t x 119mm BCD

Pretty ring from the Zeus Criterium groupset. This is the same ring as the 2000, except the 2000 is drillium Condition New old stock,  slight shop wear Details 48t BCD: 119mm 5-bolt  

NOS Zeus Criterium Chainring: 47t x 119mm BCD

Pretty ring from the Zeus Criterium groupset. This is the same ring as the 2000, except the 2000 is drillium Condition New old stock, mint Details 47t BCD: 119mm 5-bolt  

Simplex Competition Chainring: 51t - 6-Bolt - 1940's 1950's - Chrome (EXC)

Competition chainring from the 1940's and 1950's. These were used on a wide variety of brands, usually 3 pin cottered cranks using Simplex's adapter plates. Condition Excellent used condition. Light cosmetic wear. Details 51 tooth 6 hole

Simplex Competition Chainring: 48t - 6-Bolt - 1940's 1950's - Chrome (EXC)

Competition chainring from the 1940's and 1950's. These were used on a wide variety of brands, usually 3 pin cottered cranks using Simplex's adapter plates. Condition Excellent used condition. Teeth have chrome wear (and on the back side one tooth is...

NOS Simplex Competition Chainring: 49t - 6-Bolt - 1940's 1950's - Chrome

Competition chainring from the 1940's and 1950's. These were used on a wide variety of brands, usually 3 pin cottered cranks using Simplex's adapter plates. Condition New old stock, minimal shop wear Details 49 tooth 6 hole

Early TA P205 Pro 5 Vis Track Chainring: 1/8" - 53t x 50.4mm - 1940's 1950's - Single Ring (EXC)

This is a very rare 1940's or 1950's Specialties T.A. pista chainring, as identified from the presence of TA's old logo.  One of the logos is a small chainring shape, the other is stamped "cegedur duralumin forge"; Cegedur being the manufacturer...

TA Pro 5 Vis Cyclotouriste Inner/Middle Chainring: 42t - REF 2082 (Near Mint Low Miles)

These are original 1960's, 1970's, and early 1980's first production rings for the T.A. Pro 5 Vis crankset.  They have a 6 bolt 80mm BCD, and also fit the Stronglight 49D, and Velo Orange Gran Cru cranks.  They work for either the inner or...

TA Pro 5 Vis Cyclotouriste Inner/Middle Chainring: 46t - REF 2082 (Near Mint Low Miles)

These are original 1960's, 1970's, and early 1980's first production rings for the T.A. Pro 5 Vis crankset.  They have a 6 bolt 80mm BCD, and also fit the Stronglight 49D, and Velo Orange Gran Cru cranks.  They work for either the inner or...

TA Pro 5 Vis Criterium Outer Chainring: 53t x 50.4mm - REF ch205 (EXC)

Criterium or "Course Legere" version of the Pro 5 Vis outer ring for high tooth count inner rings ideal for road racing and criteriums. These are original 1960's, 1970's, and early 1980's first production rings for the T.A. Pro 5 Vis crankset.  They...

TA Cyclotouriste Pro 5 Vis Outer Chainring: 52t x 50.4mm - REF cy205 (EXC)

These are original 1960's, 1970's, and early 1980's first production rings for the T.A. Pro 5 Vis crankset.  They have a 50.4mm BCD, and also fit the Stronglight 49D, and Velo Orange Gran Cru cranks. Condition Excellent used shape.  Quite...

Early TA Pro 5 Vis Ref 2175 Double Chainring Set: 175 Professional Adapter + 52t / 49t - 1940's 1950's (EXC)

This is a 1940's or 1950's Specialties T.A. road double chainring set, as identified from the presence of TA's old logo.  One of the logos is a small chainring shape, the other is stamped "cegedur duralumin forge"; Cegedur being the manufacturer...

TA Pro 3 Attaches Ref 2173 Double Chainring Set: 173 Professional Adapter + 52t / 45t (Near MINT Low Miles)

"Professional" adapter and chainring set for TA "Pro 3 Attaches" crank arm (or other 116mm 3 bolt crank) with a set of TA's 6 bolt "criterium" chainrings (Ref 204 & 206). Includes original chainring bolts Condition Near mint or better with...

NOS Stronglight 49D 6 Bolt Adapter Chainring: 49t x 116mm BCD (take off)

Six bolt chainring for Stronglight 49 cranks which are using an adapter. Quite rare.  Condition New old stock, take off. No visible tooth wear, slight shop wear Details 52t BCD: 116mm