Bill Davidson Ultimate Truth Aero TT / Triathlon Frameset: 56cm - 650c - Steel - Vintage 1990's Custom By Mark Bulgier

Super obscure & high tech aero race frame from the early 1990's, handbuilt by Mark Bulgier in Seattle.  This one probably belongs in a museum or with an aero bicycle collector.  I can't even begin to describe this sufficiently, so here are...

NOS Campagnolo Record PISTA Quick Release Skewer Set: 1967/1968 - 1036/1P & 1036/1A - Factory Curved (Pair)

Yes, these RARE skewers were from a track hubset!  In the 1967 Campagnolo catalog #15, these are shown on a high flange Record pista hubset with threads for a cog and lockring.  Velobase explains these were allowed for mass-start races in 1967...

Salsa Size-O-Matic Fitting Stem: Vintage SM-1000 - 25.4mm 26.0mm 26.4mm

This is the early version 1 of the famous Salsa sizing stem.  The current Salsa Size-O-Matic II is largely the same, just with the capability to fit 31.8mm handlebars.  This version comes in the tall and skinny case with a Plano Outdoor Systems...

NIB/NOS Nitto Nitto S66 Triathlon / TT Seatpost: 27.2mm - 50mm Offset (Forward!)

Nitto's S-66 was designed specifically for the needs of triathlete and time trial racers.  It's 50mm of forward leaning offset gets you over the pedals in your sprint, and it's designed to be STIFF.  Condition New old stock in retail box,...

NOS Cinelli Sesamo 1" Threadless Stem: 120mm x 26.0mm - Silver & Black - Vintage 1990's - Split Top Design

This cool 1990's threadless stem features a weird way to allow the handlebars to be removed without unwrapping them.  The stem is split down the middle lengthwise, and the top half of the stem actually comes completely off by removing the three top...

NIB/NOS Cinelli Sesamo 1" Threadless Stem: 130mm x 26.0mm - Silver - Vintage 1990's - Split Top Design

This cool 1990's threadless stem features a weird way to allow the handlebars to be removed without unwrapping them.  The stem is split down the middle lengthwise, and the top half of the stem actually comes completely off by removing the three top...

Ideale TB 90-3 Narrow Rail 32mm Leather Saddle: For Clip No. 3 - Brown - Copper Rivets

This is one of the mysterious narrow rail Ideale saddles! This one has rail spacing of 32mm, while standard is 38mm.  It works with the Ideale No. 3 saddle clip, with the micro-adjustable angle and matching 32mm spacing (no. 1 & 2 use the...

Chris King DH Wheelset: Disc-Go-Tech Hubs + Mavic D321 CD - 32H x 135mm - 9mm QR - Black - 8/9/10s (Near Mint+)

This is a top spec downhill MTB, freeride, and all mountain wheelset from the late 1990's and early 2000's.  It rides on Chris King's first disc brake hubs, the DiscGoTech laced to the bulletproof Mavic D321 ceramic rims at 36mm wide.  Chris...

NOS Powerlite Precision Hex Nut Front Hub: 28H - Mid School BMX - Black - High Flange

Rare and weird old BMX hub from the late 1990's or early 2000's.  It's high flange is hex shaped! It's sure to draw attention and questions.  Great for your mid school BMX bike, or even a fixie! Condition New old stock, slight shop wear...

Campagnolo Porta-Catena Chain Holder: 1-Bolt Version (7316008)

This is a rare 1970's and early 1980's dropout chain rest, which was a part of the Campagnolo Nuovo Record Portacatena 1013/6 downtube shifter system.  It's largely a standard friction shifter, but the lever has a flip lever which shifts the...

Frank Spivey(?) Long Cage For Campagnolo Nuovo Record: Drillium - Bullseye Pulleys - 123mm c-c - Cupertino/Spence Wolf (Near Mint+)

This custom extra long cage quite likely came out of Frank Spivey's workshop, alongside the better known yet ultra rare Spence Wolf Alpine.  This one is even longer, at 123mm center to center on the pulley bolts!  The cage consists of two...

Cinelli Unicanitor SL MOD 65 Flying C Saddle: Wishbone Rail - Textured Smooth Leather Covered - Black (Near Mint)

This is an early to mid 1980's Unicanitor Superleggera, with alloy wishbone rails and the big Flying C logo on the side.  It has a lovely smooth leather cover that's a bit textured and shows it's grain well. Before the legendary Cinelli Unica-Nitor...

NIB/NOS Crud Claw Cassette Cleaner Gizmo Gadget: Retro 1990's Weirdness - Black Anodized

This little trinket from the wild and weird early 1990's attached to your dropout under your quick release, and weaved through your cassette cogs to clean the mud and gunk as you pedal.  Did they work? I don't know. Never used one myself.  But...

Custom TA Pro 5 Vis Drillium 50.2mm Outer Chainring Guard: 38t / 39t / 40t - Highly Polished (MINT)

This beautiful chainring guard was made from a NOS outer cyclotouriste chainring by Norther Cycles.  The teeth were cut off, the outer ring was precisely drilled, and the outer side was given an almost mirror-like polish.  This is ideal for any...

ENVE CX Carbon Disc Fork: Wild Custom Powdercoat- Tapered - QR - Peach/Neon Green/Grey (New Take-Off)

Radical and loud is the name of the game with this cross/gravel fork!  It has a high detail custom splatter paintjob on the lower section of the legs, with a matte grey for the crown and a few inches top of legs.  Unknown painter, but I...

NIB/NOS Campagnolo Model Competition Brooks Record Narrow Rail Seatpost: 27.0mm - Model 1045 - 1950s 1960s EXC RARE

From 1958 to roughly 1961, Campagnolo made the Brooks Competition narrow railed version of their 2-bolt Record seatpost.  This one is model 1045, the standard 2-pin Record post is model 1044.  Brooks (Brooks Campagnolo Modell), Ideale, and...