Recently Reduced Prices

NOS Rockshox Boxxer LEFT Fork Decal / Nameplate: ORIGINAL 2003-2004 (Non-Driveside Only, Sold Individually)

These are ORIGINAL Rockshox-produced hard stick-on logo plates that came on ~2003-2004 Boxxer DH forks.  Peel off the wax paper backing and stick them on your fork leg, and your Boxxer will look good as new! (well, they're not magic.  They...

NOS/NIB Benotto Professional Cello Bar Tape: Dark Blue - Smooth - End Caps - Vintage 1970's 1980's

An old favorite for vintage road bikes!  This tape is thin, flexible, and does not get dirty! Benotto tape was introduced in about 1975 and ran through the mid 1980's and is a top choice for classic road bikes and L'Eroica rides.  This dark...

NOS Two-Pin Dust Caps: Deeper Than Most - Chrome Plated Plastic

2-pin dust caps that look very similar to XT FC-M730 caps, but are a lot deeper front to back. Unsure who made these or why they're so deep. Condition New old stock! Slightest hints of shop wear microscratching Details Pair

NOS Two-Pin Dust Caps: Chrome Plated Plastic

2-pin dust caps that look very similar to XT FC-M730 caps. Condition New old stock! Slightest hints of shop wear microscratching Details Pair

NOS Shimano XT FC-M730 / FC-M730 Dust Caps: 2 Pin - Chrome Plated Plastic

Clean caps for your 1980's Shimano XT cranks! These cosmetically look the same as XTR FC-M900 1st gen cranks, and look great on Dura Ace 7400/7402 cranks, as they use the two-pin style too. Condition New old stock! Slightest hints of shop wear...

Campagnolo Spoke Protector: Plastic + Alloy Flange (EXC)

This cool plastic and aluminum dork disc is an ultralight model from the 70's and 80's.  It's fairly large, and will cover a 34t large cog for touring or mtb use. Condition Excellent lightly used condition, with some light surface scratches. ...

Campagnolo #1014 Nuovo/Super Record Downtube Shifters: Clamp On - Black Cable Stops - Flat Plates/Screws (Mint, NOS Take Off?)

Super clean clamp version of the NR/SR DT shifters of the 60's, 70's, and 80's.  These have the flat cover plates (part #603) and flat head screws, which were used up until the late 1970's. Condition These look like they could be new old stock...

NOS Campagnolo Nuovo/Super Record REAR QR Skewer: Curved Blade Post CPSC 1978-1987

Curved post-1978 version of the Campy NR/SR skewer, rear only Condition New old stock. Most of them are very close to pristine with just a touch of shop wear. They're all show worthy Details Rear only Chrome

NOS Mafac Rear Cable Hanger w/ Guide Pulley Wheel for Mixtie: Binder Bolt w/ Stop Pin (RARE)

This odd contraption is a seatpost bolt mounted cable stop that features a roller wheel to redirect the direction the cable travels.  It is made for mixtie frames where the cable is coming from the bottom making it's way up to the seatstay mounted...

Campagnolo #1014 Nuovo/Super Record Downtube Shifters: Clamp On - Black Cable Stops - Flat Plate s (Near Mint)

Super clean clamp version of the NR/SR DT shifters of the 60's, 70's, and 80's.  These have the flat cover plates (part #603) and flat head screws, which were used up until the late 1970's. Condition Near mint with low miles. Very slight wear,...

3DV PURPLE Paul Klamper Mechanical Disc Brake: Long Pull for MTB Levers - IS/Post (NEW)

Radical limited edition 3D Violet anodized set of Paul Components Klamper disc brakes! This color matches perfect to retro 1990's ano components in 3DV purple.  These are the long pull version, designed for use with v-brake levers or cyclocross...

Chris King 1 1/8" NoThreadSet: Dark Plum Purple 2012 - Bold (NEW)

Nothreadset in the RARE 2012 limited edition dark purple color! Chris King originally made a VERY limited run of this purple for Independent Fabrication early/mid 2012, and then expanded to be a limited color for the rest of 2012 only.  This is NOT...

Schwalbe Nobby Nic EVO 26 x 2.35" Folding Tire: SnakeSkin - TLE - Addix Speedgrip (New take-off)

Schwalbe's top level Evolution line tires in 26" size!   From the manufacturer The all-rounder that works in every situation, no matter the weather, no matter the terrain. Widest possible range of use: for tour and all-mountain, for...

NOS SIMPLEX Demultiplicator + Cable Stop: #2343 - 1st Type 1960's Early 1970's

Rare first generation of the Simplex Demultiplicator, model #2343.  This one is all metal, with the old Simplex "S" logo engraved lightly on the band.  The 70's version of this was similar but had the bolder Simplex star logo, and #3637-L...

NOS Benotto Rubber Handlebar End Caps: Green (Pair, MINT)

Cool vintage drop bar end caps, from the 1970's and 1980's. Lovely green, somewhere between Kermit green and a mild British Racing Green Condition New old stock, just about perfect Details Pair  

NOS Benotto Rubber Handlebar End Caps: Brown Burgundy (Pair, MINT)

Cool vintage drop bar end caps, from the 1970's and 1980's. Earthy burgundy-ish, reddish brown Condition New old stock, just about perfect Details Pair Red/brown

NOS Campagnolo #1014 Nuovo/Super Record Downtube Shifters: Clamp On - Black Cable Stops - Flat Plate s (Shop Dirt)

Super clean clamp version of the NR/SR DT shifters of the 60's, 70's, and 80's.  These have the flat cover plates (part #603), which were used up until the late 1970's. Condition New old stock, never installed.  These show zero cable marks in...

1972 Nishiki Professional Randonneur Conversion: 58cm - Unrestored - Chrome Lugs - Drillium - Cyclone GT - Mafac - Prior - Belt - Simplex - VO

This gorgeous Nishiki Pro is my personal bicycle.  I am sad to see it go, but I did more staring at it than riding it as I prefer fatter tires on Portland's rough roads.  It was among the final years they were built in the Katakura factory. It...

Race Face System Threadless Stem: 1 1/8" x 110mm x 25.4mm - Vintage 1990's (Mint)

Here's a super cool RaceFace stem from the late 1990's.   Very expensive when new.  I can't tell if this is a zero degree, or if it has a very small rise. Condition  Very close to mint, possibly a NOS take off...

Bikase Handlebar Cell Phone Holder Case: Iphone - Android - Samsung

Simple and effective way to display your cell phone on your handlebars.  Mounts securely to your stem via strong velcro.  Fully waterproof. Condition Like new or new Details Dimensions: 6.25" x 3"

Campagnolo Centaur 10s Front Derailleur: 34.9mm STD Double - FD9-CE2C5 (MINT Almost New)

This is a standard 10 Speed Centaur, compatible with PowerGlide and Ultraglide shifters.  It is NOT the CT or QS.   Condition Barely used, mint condition.  The only wear to note is chain rub on the inner cage plate. Details 34...

Silca Impero Frame Pump: 1st Gen Flat Top - 1960's - Black - 46cm Body for 51cm to 53.5cm Frame (Near Mint+)

Super rare early version of the legendary Silca Impero, identified by it's motorcycle grip shaped handle with a rounded end. It was designed for use with a pump peg or umbrella clip, where as the later more common sleek cylinder handles had a cradle at...

Cannondale Si BB30 Carbon Crankset: 175mm - Compact 50/34t (Near Mint+ Low Miles)

Tough to find ~2012 era version of the SI crank.  I can't figure out if these were the Hollowgram model or a separate model. Condition Near mint or better hardly used shape.  These have less than 300 miles, and the only real wear to note is...

Honjo M79 Fender Stays: 58mm Wide for 650B -Pair (NEW)

Pair of fender stays for Honjo H79 fenders. Condition  New in package Details  Sold in pairs. No hardware

NIB/NOS Campagnolo Super Record A0R7 Seatpost: 25.0mm - Last Gen 1986-1989 (Not Aero/Fluted)

This is a VERY rare Campagnolo Record seatpost made in small numbers from 1986 to 1989. In 1986, Campy released the C-Record gruppo and phased out Super Record.  The flagship C-Record aero seatpost didn't fit the stylistic needs of the classic bikes...

2017 Pro Team-Issued Specialized SL Pro Long Sleeve Jersey: Medium - Lightweight - World Champ Stripes / Red / White (NEW)

This is a team issued Specialized SL Pro jersey issued to Howard Grotts.  I bought this from Howard Grotts himself at the Durango Devo Bike Swap (he never used this one).  It's a true pro team version, evidenced by the sponsor logos on the back...

Team-Issued Specialized SL Pro Short Sleeve Jersey: Medium - Howard Grotts Worn - Lightweight - World Champ Stripes / Red / White (MINT+)

This is a team issued Specialized SL Pro jersey worn by Howard Grotts.  I bought this from Howard Grotts himself at the Durango Devo Bike Swap.  It's a true pro team version, evidenced by the sponsor logos on the back of the jerseys (the SL...

Team-Issued Specialized SL Pro Long Sleeve Jersey: Medium - Howard Grotts Worn - Lightweight - Red & White (MINT+)

This is a team issued Specialized SL Pro jersey worn by Howard Grotts.  I bought this skinsuit from Howard Grotts himself at the Durango Devo Bike Swap.  It's a true pro team version, evidenced by the sponsor logos on the back of the jerseys...

NOS DIA-COMPE Bakelite Caliper Brake Bolt Caps (Pair): Dark Grey - BMX Nippon/MX - Threaded

These caps thread onto the back of the caliper mount bolt, outside of the nut.  They essentially cover the section of exposed threads outside of the nut.  They work for ALL nutted caliper and centerpull brakes that have a bit of thread outside...

Set of 6 NOS DIA-COMPE Bakelite Caliper Brake Bolt Caps: Dark Grey - BMX Nippon/MX - Threaded

These caps thread onto the back of the caliper mount bolt, outside of the nut.  They essentially cover the section of exposed threads outside of the nut.  They work for ALL nutted caliper and centerpull brakes that have a bit of thread outside...

NOS DIA-COMPE Bakelite Caliper Brake Bolt Caps (Pair): "D-C" - BMX Nippon/MX - Threaded

These caps thread onto the back of the caliper mount bolt, outside of the nut.  They essentially cover the section of exposed threads outside of the nut.  They work for ALL nutted caliper and centerpull brakes that have a bit of thread outside...

Set of 6 NOS DIA-COMPE Bakelite Caliper Brake Bolt Caps: "D-C" - BMX Nippon/MX - Threaded

These caps thread onto the back of the caliper mount bolt, outside of the nut.  They essentially cover the section of exposed threads outside of the nut.  They work for ALL nutted caliper and centerpull brakes that have a bit of thread outside...

NOS Benotto Rubber Handlebar End Caps: Red (Pair)

Cool vintage drop bar end caps, from the 1970's and 1980's. Condition New old stock, pristine and supple. Details Red Pair

NOS Cinelli Rubber Handlebar End Caps: Flying C Logo - Royal Blue (Pair)

Cool vintage drop bar end caps, made with the Flying C logo from 1978 to the late 1980's.  We have these in a few other colors HERE Condition New old stock. Details Royal blue Pair

NOS Cinelli Rubber Handlebar End Caps: Flying C Logo - Dark Blue (Pair)

Cool vintage drop bar end caps, made with the Flying C logo from 1978 to the late 1980's.  These ones are a dark blue, with an almost purple tint.   We have these in a few other colors HERE Condition New old stock. Details Dark...

NIB/NOS Campagnolo Model Competition Brooks Record Narrow Rail Seatpost: 27.0mm - Model 1045 - 1950s 1960s EXC RARE

From 1958 to roughly 1961, Campagnolo made the Brooks Competition narrow railed version of their 2-bolt Record seatpost.  This one is model 1045, the standard 2-pin Record post is model 1044.  Brooks (Brooks Campagnolo Modell), Ideale, and...

X-Fusion Suspension Service Pack Rebuild Kit: 42-VTDH-Dmp-601 (2004 to 2006)

Seal rebuild kit for X-Fusion suspension from 2004-2006. Unknown what models these work for. Condition New in retail package Details Model 42-VTRDH-Dmp-601

X-Fusion Suspension Service Pack Rebuild Kit: 42-VTRPV-Dmp-601 (2004 to 2006)

Seal rebuild kit for X-Fusion suspension from 2004-2006. Unknown what models these work for. Condition New in retail package Details Model 42-VTRPV-Dmp-601

NIB Rockshox PopLoc Dual Lever Assembly

Dual lever to control both fork and rear shock. Condition New in OEM packaging, with cable and manual Details

NOS Vintage Phil Wood Knurled Track Lockring: For 3-Piece Hubs - Left Thread 1.32" x 24 TPI

These are the ridged lock rings that came with early Phil Wood 3 piece pista hubs from the 1970's and early 1980's.  The left hand threaded ring's diameter is 1.32" x 24 TPI, which fits Phil Wood and Campagnolo track hubs.  Stupid rare...

Rockshox Fork Decals: ORIGINAL 1990's to Early 2000's! SID - Judy - Psylo - Boxxer - Indy (Set of 5)

These are ORIGINAL Rockshox-produced decals, that go on the front of each fork leg of virtually all Rock Shox forks from the late 1990's to mid 2000's.  This set of 5 decals is enough for two forks, and put the third one on your bike, shock, or...

NEW Shimano XT FD-M780-A-E Front Derailleur: 10 Speed - 2x10 - Direct Mount

10 speed (10x2) XT front mech for frames that use direct mount. Condition New, no box Details Direct mount 10 speed For double crank

Hayes Louisa / Clara Endurance Brake Pads (pair)

Kool Stop sintered pads for Hayes Louise and Hayes Clara Endurance disc brakes. Condition New Details One pair (enough for one wheel) We may have multiple pairs of these. Select your quanity on the right