BARGAINS

Mavic 860 Front Derailleur: 28.6mm Clamp - Black (Low Miles)

The mid 1980's Mavic 860/862 derailleurs are the stuff of legend.  They work amazingly well, look great, and stand out from the crowd.  Highly sought after and fairly rare. Condition This one has very low miles and largely in wonderful shape,...

Sachs New Success Triple Front Derailleur: 31.6mm Clamp - Black (EXC+)

High quality MTB and touring front derailleur.  Condition Excellent or better lightly used shape. Slight wear to the black finish, light wear elsewhere. Details 31.6mm clamp Bottom pull for triple crank

Sachs New Success Front Derailleur: 28.6mm Clamp (EXC)

High quality front derailleur, with a nice chrome finish and blue decals. This came out with an 8 speed group, but it will work well with 6, 7, 8, and 9 speed drivetrains. Condition Excellent used shape.  Slight decal wear, pinpoint beginnings of...

Campagnolo Nuovo Record Front Derailleur: 28.6mm 1052/1 - Pre 1978 no lip

This is an early version Campy NR front derailleur, from the 1973-77.  It has no lip (introduced in 1978) or cable stop, but it has a circlip.  These are a bit less common than the later 3-hole versions.  Condition Very good used shape...

Campagnolo Nuovo Record Downtube Shifters: Milled + Yellow Fill - #1013 Braze

Heavily milled out Campagnolo NR/SR DT shifters with a yellow fill paint! Condition Average used condition with some cosmetic wear. Details Braze on Friction ~1967- mid 1980's

TA Pro 5 Vis Cyclotouriste Crankset: Capped Pedal Holes Early Version - 170mm x 54/44T Double - French (Near Mint+ Low Miles)

Very clean early version that features the closed pedal holes, with the little "cap" with a hole in it over the back sides.  The very earliest versions had different flutes and little engraved logos near the dust caps, and these were after those...

Campagnolo C-Record Brake Levers: 4th Gen 1992/1993 - Aero (EXC)

Last generation of Record brake levers, identified easily via the small round hole at the top of the blades. Condition Excellent used condition overall, with a light to scuffing to the top faces of lever blades. Otherwise quite clean. Hoods are near...

Campagnolo 1st Gen C-Record / Cobalto Brake Levers: 1983-1985 (EXC)

These levers were issued with both the first generation C-Record group, and the Super Record Cobalto brakeset.  They were made from 1983 to 1986.  They are identifiable as 1st gen via the white hoods with ribbed top, the lack of a quick...

Campagnolo C-Record 1st Gen Downtube Shifters: Pure Friction - #0118074

This is a 1st gen C-Record friction downtube shifter set.  They were issued from 1983 to 1985, and in 1986 they started making retrofriction and then Syncro indexed shifters. Condition Overall excellent or better lightly used shape.  Screws...

Selle Italia Flite Titanium Genuine Gel: White Perforated Leather + Kevlar - 2001

Rare version of the venerable Flite Titanium in white, with perforated leather panels and kevlar rear corners from 2001. Condition Average used shape with odd dye wear throughout. I don't see much of any physical wear though. Plenty of riding left for...

Selle Anatomica Titanico Leather Saddle: Black (Tension Bolt Issue, for parts Or Repair)

Besides Brooks, Selle Anatomica saddles are the best leather saddles you can buy!  Some like them even more than Brooks.  They're great for those who need a cutout, or prefer a shorter break in time.  The leather on these have a...

Campagnolo #713 Pedal Wrench 15mm / Fixed Cup BB Spanner Tool

Cool combination 15mm pedal wrench and bottom bracket fixed cup wrench. Condition Average used shape with some wear.  

NIB/NOS Campagnolo Nuovo Record #1046/A Bottom Bracket: 114.5mm X 68mm English (Take off)

BB for 1977-1987 Nuovo Record Strada crankset, at 114.5mm long English threads.  Rifled thick cups.  The spindle is a world logo.   Condition New old stock, take off.  It was installed on a show bike, and then removed before...

1st Gen Campagnolo " No Record" Nuovo Record Strada High Flange REAR Hub: 36H x 126mm (EXC Perfect Bearings)

This is a first generation "Nuovo" Record rear hub! It was made from 1960 to 1963, and is just like the later and more common NR hubs, but lacks the word "RECORD" under the Campy "World" logo.  These are quite rare, and a must if you have an Italian...

Shimano 600/Ultegra RD-6401 Rear Derailleur: 8 Speed

Lovely 8sp Tri Color rear derailleur from the 6400 group of the 1980's. Condition Great used shape with cosmetic wear.  Pivots are tight and smooth, smooth pulleys. Details Short cage Model: RD-6401

NOS Zeus 2000 / Criterium Brake Lever Bodies: (Pair)

Replacement brake lever bodies from 2000 and Criterium levers.  Condition Likely new old stock with shop wear though these could have been used. Details Sold in pairs

NOS Zeus Criterium Brake Lever Blades & Pivots (Pair)

Replacement lever blades from Criterium levers.  Condition New old stock, light shop wear Details Sold in pairs

NOS Zeus Brake Parts LOT: New Racer / Criterium - Arms Springs Hardware...

Handful of spare arms and hardware from Zeus New Racer (and other) brakes. The top two brakes are complete minus pads and barrel adjusters Condition New old stock mostly. Details

Nitto Hi-Crown "Girder / I-Beam" Quill Tall Stem: 70mm x 25.4mm (RARE)

This very early Nitto stem in the style of the 1930's Reynolds Girder stem or 1950's GB I-Beam stem.  It was produced from roughly 1965 to the late 1970's.  From my research, this could be the very first stem Nitto made.  It's milled out...

Mavic 305 SSC/Zap Headset: 1" Threaded - Silver/Black - Italian (Near Mint, But Missing Band)

Rare and sought after Mavic headset from the SSC & Zap groupsets, produced 1989-1999.  This the road oriented version, whereas the 315 and 316 were marketed for mountain bikes (of course it works for both road and mtb).  It features a...

SRAM X7 10 Speed Front Shifter: Grey - Double or Triple 2x / 3x

Nice mid level front/left trigger shifter from the 10s era. Condition: Excellent used shape with some light cosmetic wear Details: Front only Double or triple

NOS Rockshox Boxxer LEFT Fork Decal / Nameplate: ORIGINAL 2003-2004 (Non-Driveside Only, Sold Individually)

These are ORIGINAL Rockshox-produced hard stick-on logo plates that came on ~2003-2004 Boxxer DH forks.  Peel off the wax paper backing and stick them on your fork leg, and your Boxxer will look good as new! (well, they're not magic.  They...

Avid Juicy Seven Hydraulic Disc Brakeset (EXC)

Popular Juicy 7 brakes! Condition Excellent used shape with light cosmetic wear. Note the front caliper is not attached to it's hose Details Black No rotors

Campagnolo Nuovo/Super Record Crank Arms: #1049/A: 172.5mm - Dust Caps - 1980s

Mid 1980's NR/SR strada crank arms for your L'Eroica bike build or your backup fancy bike Condition Non-drive arm is near mint, driveside has a bit more wear and is probably very good.  Both arm ends are very clean with only scattered light marks...

Campagnolo Chorus 10 Speed Crank Arms: Square Taper - 170mm - Silver/Alloy (Near Mint+)

Early to mid 2000's crank, from the 10 speed era.  These were the last of the classic looking and square taper Campy cranks, and they were awesome components!  Condition Near mint or better with low miles! Minimal wear. Only a few stray...

Campagnolo Super Record Brake Levers: #4062 - White Hoods

Drillium Super Record levers with original last generation white hoods. Condition Average used shape with plenty of cosmetic wear, but still fully functional! Hoods are functional and supple but ugly and have hinge tears. Details Non-aero right...

Campagnolo Super Record Brake Levers: #4062 - Brown GUM Hoods (Near Mint & One w/ Scrape)

Drillium Super Record levers with their original brown/tan gum hoods. Condition One lever is near mint or better with barely a mark, the other has a scrape down the outside but otherwise near mint shape.  The gum hood on the scraped one is supple...

SRAM ESP 9.0 Composite Rear Derailleur: Carbon Composite - Long Cage - 1990's

The ESP 9.0 group was Sram's top of the line mountain bike group in the 1990's and early 2000's, before the X9 and X0 models replaced the ESP line.  It is a 1:1 ratio derailleur, and is compatible with any ESP or X5/X7/X9/XO/XX shifter.  It was...

Chris King Dropset 5 Headset: Silver/Pewter (Perfect Bearings, EXC+)

Integrated headset from Chris King Condition: Perfect bearings, excellent or better cosmetically. Top cap is pewter vs the silver race, and cap is a bit more worn. Details: 42mm 45x45 upper bearing for 6.85-7.05mm bearing ream depth. 52mm 45x45...

Chris King Inset 8 Headset: Black - 1 1/8" > 1 1/4" Tapered - 44mm (Perfect Bearings)

Built for the next generation of tapered road forks the Chris King InSet™ 8 is built to fit contemporary road and cross bikes that utilize 1-1/8” to 1-1/4”tapered steerer tubes and a 44mm headtube. Our InSet™ 8 combines our...

Campagnolo Nuovo Record Brakeset: #2040/1 - Short Reach - Recessed (Low Miles w/Corrosion)

Short reach Nuovo Record sidepull road brakes from the post CPSC era, 1978 to 1984+.  Domed qr levers, original adjusters.  You can discern short reach from standard reach NR brakes by noticing where the Campagnolo logo lands. On short reach,...

Campagnolo Athena D100 Rear Derailleur: 1988 to 1991 - 30t Max! - Carmichael Pulleys Red

This 1st generation Campagnolo Athena D100 rear mech is a short cage design that can shift up to a 30t large cog, thanks to it's unique multi-position chip that fits around the upper pivot bolt and adjusts derailleur angle.  It's aesthetics are...

Shimano Dura Ace PD-7401 Clipless Pedals: Grey (R: Low Miles Perf Bearings, L: Average)

First Dura Ace pedals circa mid 1980's, from the 7400 groupset.  These use Shimano or Look Delta cleats. Condition The right pedal is excellent or better with perfect bearings. The left is more worn and I'm throwing it in as a free bonus. These...

Shimano 105 RD-5600 Rear Derailleur: 10 Speed - Short Cage - Silver (Low Miles + Road Rash)

Affordable and reliable derailleur from the 10s 105 groupset Condition This one has very few miles confirmed by the lack of scratching on the back of the outer cage plate by pulley and almost no wear on pulleys, but has road rash on the face and lower...

Specialized BG Romin Expert Ti Saddle: 130mm - White w/ Red & Grey Pinstripes

This ~2012 first generation Romin was one of the few years the model was made in 130mm width; Specialized now only offers it in 143mm and larger sizes.  This is ideal for you ultra skinny racers and those who prefer a firm, flat, and minimally...

Selle Italia Flite Trans Am Gel Flow Saddle: Cutout -

Very popular saddle from Italian saddle maker Selle Italia, circa early 2000's. The "Trans Am" designator in the model name means there is a cutout. This was the first Flite saddle with a cutout. Condition Very good to great use shape.  Overall it...

Shimano Deore LX BR-M560 Cantilever Brake: Black

Solid canti brakes from the 1990's, these came on LOTS of bikes stock.  Pretty similar to the XT's. Condition Excellent used shape.  Paint and decals look great with only very minor marks.  Pads have 90% life left and are supple...

Shimano XTR PD-M980 SPD Clipless Pedals: Titanium

Bulletproof and lightweight XTR pedals from the 10 speed era.  These are just barely heavier than the current M9000 pedals, and were built with durability in mind.   Condition Great used shape. Bearings are buttery smooth, though the...

Shimano XTR FD-M952 Front Derailleur: 28.6mm - Top Swing/Low Clamp

A rather high tech derailleur, featuring Differential Plate Action-Inner and outer chain cage plates, which move with an independent action that improves shifting response. Light Alloy Chain Cage-Nickel plated light alloy chain cage reduces weight and...

Galfer Wave 180mm Disc Rotor: 6-Bolt (Very Low Miles)

Bargain price on a barely used six bolt rotor. Condition When I photographed these I thought it was a new take-off with hardly a sign of pads touching it, but in the pics they look slightly more used than that. Very low miles either...

Easton Havoc 35 Direct Mount Stem: 45mm / 50mm x 35mm - Black

Bargain priced bolt on / direct mount stem for 35mm bar clamp. Adjustable length Condition Average used shape with some cosmetic wear

BMX Parts Lot: 4 Pegs + Right Odyssey Brake Lever + Spank Grips + Title Gyro + Race Face Ride 31.6mm Seatpost

Bargain basement price on a pile of modern BMX parts Condition Average to great used shape, see pics. Sold AS-IS Details Seatpost: 31.6mm x 165mm

26" Fox 32 F-Series Fork: 80mm - 1 1/8" - Disc/V-Brake (Needs Rebuild)

Bargain on a 26" Fox F-Series XC fork that has been "Pushed" due to an issue where you compress the fork once and it feels great and the next push only moves a bit and feels like it has a lockout on. Compatible with both disc brakes and...

NOS/NIB Benotto Professional Cello Bar Tape: Dark Blue - Smooth - End Caps - Vintage 1970's 1980's

An old favorite for vintage road bikes!  This tape is thin, flexible, and does not get dirty! Benotto tape was introduced in about 1975 and ran through the mid 1980's and is a top choice for classic road bikes and L'Eroica rides.  This dark...

Shimano 105 PD-1056 Clipless Pedals: Look Delta Style - Grey

Early edition of Shimano 105 clipless pedals! These use Shimano/Look delta cleats. Condition Average to very good used shape. Smooth bearings but a bit dry. Some cosmetic wear Details No cleats Grey

Shimano SPD Clipless Pedals: PD-M505 - Black (EXC Perfect Bearings)

Entry level SPD clipless pedals.  These are great beginner's pedals.  They can be adjusted to release very easily, are inexpensive, and are practically bombproof.   Condition: These have perfect feeling bearings and light cosmetic...

NOS Two-Pin Dust Caps: Deeper Than Most - Chrome Plated Plastic

2-pin dust caps that look very similar to XT FC-M730 caps, but are a lot deeper front to back. Unsure who made these or why they're so deep. Condition New old stock! Slightest hints of shop wear microscratching Details Pair

NOS Two-Pin Dust Caps: Chrome Plated Plastic

2-pin dust caps that look very similar to XT FC-M730 caps. Condition New old stock! Slightest hints of shop wear microscratching Details Pair