Quill Stems

Titan Integrated Quill Stem + Trekking Handlebar: 85mm Ext x 475mm Bar - One Piece (NEAR MINT++ RARE)

Super obscure and neat integrated bar/stem combo! This is a one piece design, which will make for a rather stiff unit. This swept back design was likely intended for a touring/trekking upright bike (like a 1960's or 1970's Schwinn Paramount!). Great to...

NIB/NOS Girvin Flexstem Suspension Quill Stem: 1 1/8" x 130mm x 25.4mm - NO ELASTOMER - Black

* Note that this is missing it's elastomer. New old stock original ones are available here, and freshly reproduced ones Soft & Medium HERE + Firm, HERE* The Girvin Flexstem was an early suspension design for mountain bikes, around the late...

NIB/NOS Girvin Flexstem Suspension Quill Stem: 1 1/8" x 150mm x 25.4mm - Metallic Grey (Firm Elastomer, Blue)

The Girvin Flexstem was an early suspension design for mountain bikes, around the late 80's/early 90's.  These were used on bikes without front suspension, and provided about half an inch of "travel".  They were quickly displaced when...

Nitto Tallux NTC-DX Technomic Deluxe "Pearl" Quill Stem: 110mm x 26.0mm - 195mm Tall (New Take Off)

The Tallux is Nitto's top of the line tall stem.  It has the satiny smooth finish, fancy clamp bolt/nut and curvy lines of the NP Pearl. Awesome for townie bikes and touring bikes with moustache bars, dirt drops, Dove bars, etc. Condition New but...

Specialized S2 Quill Stem: 100mm x 25.4mm - Made by Nitto - Silver (Near Mint)

These are hard to come by in the box.  This is the S-2 model, made by Nitto. It's a late 1980's or early 1990's version (date code 1991). This era had the wedge expander vs the earlier cone. It's a beautiful stem, with sultry curves and a satiny...

Moots Titanium Quill Stem: 1 1/8" x 140mm x 25.4mm - RARE Vintage 1990's (EXC+)

Super rare quill stem from Moots, circa early 1990's or very late 1980's. Moots threadless stems are everywhere, but their quill ti stems are rarely seen. You even see their steel Mountaineer stems more often! Perfect for your Moots YBB, Rigor Mortis,...

Cinelli XA Quill Stem: 125mm x 26.4mm - Silver (Barely Used Near Mint+)

Cinelli's aero styled alloy quill stem, circa 1980's to mid 1990's.  Condition Mint barely used shape, not much more than a few light marks on the clamp Details 125mm 26.4mm Silver Black shim

1970's Nitto Dynamic Ambrosio Quill Stem: 90mm x 25.4mm - 1st Nitto Stem! Fuji Finest (Near Mint, RARE)

This piece of cycling history is Nitto's first ever stem, circa Sometime in the 1960's to mid 1970's! Officially it's the Nitto Dynamic I, and is drastically different from the 1980's & later Dynamic II. It is a very close clone of the Ambrosio...

Cinelli XA Quill Stem: 120mm x 26.4mm (Near Mint But Missing Face Decal)

Cinelli's aero styled alloy quill stem, circa 1980's to mid 1990's.  Condition Near mint lightly used shape, but the decal/coin faceplate thing is missing. Use that space to put your own decal or find a replacement! Some marks on quill, extension...

Salsa P10 DIRT DROP High Rise Quill Stem: 1" x 70mm x 26.0mm - 53 Degree - Black - Retro MTB (Near Mint)

The P7 (along with the 100mm P10) high rise stem is the iconic model that brought Jacquie Phelan and Charlie Cunningham's dirt drop craze (via the L.P. stem made famous on Jaquie's bike "Otto") to the mainstream.  Ross Shafer was the innovator, and...

3ttt Status Quill Stem: 110mm x 25.8mm - Pewter Grey (Near Mint+)

Top shelf offering from ttt circa late 1980's to mid 1990's.  It's reminiscent of the earlier 3ttt Record and the Cinelli XA.   Condition Near mint or better lightly used shape. Minor marks only Details Length: 120mm Bar clamp: 25...

Cinelli 1A Old Logo Quill Stem: 100mm x 26.4mm - Silver (worn)

Pre 1978 1A, with the old oval logo. Great choice for L'Eroica bikes  and any Italian classic road bike. Condition Fair shape. Lots of wear but still usable Details 100mm 26.4mm Silver

Cinelli 1A Quill Stem: 130mm x 26.4mm - Silver (EXC)

Popular classic Cinelli stem, with the new Flying C" winged logo circa 1978 to the early 1990's. Condition Excellent used shape. Some light marks on the driveside extension, and heavier insertion marks Details Stem length: 130mm Bar clamp: 26...

Hand Built Track Quill Stem: 115mm x 25.4mm x 65D - Fillet Brazed - Faux Lug - Steel - Unfinished (Needs Slot in Clamp To Ride)

This gorgeous track/pista stem was likely made by a small framebuilder and never quite finished.  All it needs to be ready to ride is cutting a slot in the bolt area of the clamp so it can tighten (should be done by a framebuilder or metal worker)...

Cinelli XE Quill Stem: 120mm x 26.0mm - 1990's Version of XA w/ 26mm & Wedge Expander (EXC)

Lesser known version of the XA stem, the XE released in 1996/1997 when Cinelli made the switch from 26.4mm to 26.0mm. Aside from the clamp size difference, it also has a wedge expander instead of the usual cone expander and a decal on the clamp vs a...

Cinelli XA Quill Stem: 120mm x 26.4mm (Mint But Missing Face Decal)

Cinelli's aero styled alloy quill stem, circa 1980's to mid 1990's.  Condition Mint barely used shape, but the decal/coin faceplate thing is missing. Use that space to put your own decal or find a replacement! Details 120mm 26...

Titan Luxe Quill Stem: 115mm - Belgian - Steel

Titan was a high end Belgian manufacturer of handlebars and stems from the 1930's through the late 1970's.  They are famous for developing the standard road drop bar shape, which is now referred to as the "Maes bend".  These were stock parts on...

Cinelli Mod #1 Road Quill Stem: FRENCH 22.0mm - 70mm x 25.4mm - 1950's 1960's (Rechromed Mint)

Gloriously rechromed 1950's or 1960's Cinelli #1 stem for French bikes with 22mm steerers! It's shorter than most at 7cm.  It has the engraved oval Cinelli Milano logo. The entire body of the stem along with the bar clamp bolt & nut have fresh...

Cinelli 1R Flying C Pantograph Quill Stem: 125mm x 26.4mm - Polished (Near Mint)

This aero Cinelli stem from the 1970's and 1980's was the flagship model (this one is post-1978 due to the Flying C logo).  The 1R stands for 1 Record and features a cool hidden bar clamp bolt!  This particular stem is a rare version with...

NIB/NOS Cinelli XA Quill Stem: 120mm x 26.4mm - Black - Shims

Cinelli's aero styled alloy quill stem, circa 1980's to mid 1990's.  Condition New old stock in retail box. Factory sealed bag contains bar clamp bolt and 5 colored bar clamp spacers shims.  The stem has never been installed on a bike, but a...

NOS Milremo / Phillipe / Atax Stem Plug: Rear Hole - Red (Sold Individually)

These little plugs were made for quill stems that had a little port hole in the rear facing part of the extension to make for a more polished appearance.  The color matches the medium dark red the cutouts on these stems were painted from the factory...

Cinelli 1R OLD LOGO Quill Stem: 95mm x 26.4 - 1970's Early Version

Rare early version of Cinelli's top of the line quill.  This version has a Ti hidden bar clamp bolt, the old lMilano oval logo on the top of the extension, and a faceplate coin with the CINELLI font instead of the flying C logo.  Top choice for...

HIGH Polish 1950's 1960's French "Lugged" Quill Stem: Belleri / Guid Competition? 22mm Insertion - 70mm x 25mm - Alloy (Near Mint)

This gorgeous shiny stem is a bit of a mystery.  Its quill decal was used on Belleri (BF) stems, and the same faux lug shape was used on a Guid stem (which was made by Belleri).  Neither brand seems to have a match for this stem.  The...