Antique Bike Parts

Frejus Magistroni Embossed & Knurled Headset: 1" (Near Mint++)

Rare Frejus branded Magistroni headset from the 1940's, 1950's, 1960's. It has knurled cups and a two pin upper race. Magistroni made these headsets available for classic Italian racing bicycle makers to have branded. Condition Near mint with very light...

Reproduction Torrington #10(?) Pedal Blocks: 4" - Red - Set of 4 (NEW)

Thes appear to be reproduction blocks for Torrington pedals. Condition New! Supple rubber Details Set of 4 (for two pedals) Length: 4 inch Width: 45mm Hole diameter: 6.8mm Rubber Red    

Torrington #10(?) Block Pedals: 9/16" - Chrome - Red

I THINK these are Torrington #10 pedals (feel free to correct me if I'm wrong). Condition Great used shape. Bearings are buttery smooth. Scraped dust caps.  Bodies and end plate chrome in wonderful shape. note that spindles are slightly mismatched...

Velo Orange City Touring Brake Levers: 22.2mm (NEW)

These levers from VO are a modern version of brake levers such as the Mafac Ville VDA and CLB town bike brake levers. They fit 22.2mm handlebars, which is what most "flat" type bars are unless they're specifically designed for drop bar brake levers...

Titan Integrated Quill Stem + Trekking Handlebar: 85mm Ext x 475mm Bar - One Piece (NEAR MINT++ RARE)

Super obscure and neat integrated bar/stem combo! This is a one piece design, which will make for a rather stiff unit. This swept back design was likely intended for a touring/trekking upright bike (like a 1960's or 1970's Schwinn Paramount!). Great to...

1950's Sturmey Archer 3-Speed Trigger Shifter: #GC3A - Chrome Plated Bronze (EXC)

Fairly early 3sp trigger shifter from SA, dating to the mid 1950's. This shifter was constructed of bronze and plated with chrome. This one has earned a lovely patina over it's 85 or so years on earth, and much of the bronze is on display. The cool thing...

Pre-War / 1950's Chrome Seat Binder Collar: 29mm - Center Line - 1930's 1940's 1950's 1960's (

Lovely earlier seatpost binder clamp.  Origins/make are unknown, but it came from a collection of 1930's to 1960's parts (primarily English and French but some Italian)   Condition Excellent or better lightly used shape. This looks a lot...

NOS Coloral Water Bottle: Green Ribbed Plastic - Cork Top - 1940's 1950's 1960s

Clean and rare ribbed plastic Coloral water bottle in a green that's slightly lighter shade than British Racing Green.  Made in Birmingham England, these were the bottle of choice in the mid century.  Killer choice to make your L'Eroica bike...

VAR 07 Cotter Press: Removes & Installs Cotter Pins - Constructeur Type (Near Mint)

The premier tool for installation and removal of cotter pins on cotterless cranks.  This press is elusively tough to find and sought after by mechanics who love vintage and antique bicycles. Condition Near mint lightly used shape. Zero rust, all...

Vintage Cycling Racing Magazine Lot of 18: Mostly French/Italian - 1970s 1980's - International Cycle Sport - Bici Sport - Velo Press - Velosport - Cyclismo Italiano...

Random lot of largely French cycling magazines with an outlier from Canada Condition Near mint mostly

The Boneshaker + Veteran Cycle Club News & Views Newsletter LOT of 27 - Major Taylor / Raleigh Chopper / Banes Flying Gate / Raleigh Ace / Carlton

Small collection of mostly 2020 to 2023 British vintage bicycle newsletters Condition Near mint

Simplex Competition Chainring: 51t - 6-Bolt - 1940's 1950's - Chrome (EXC)

Competition chainring from the 1940's and 1950's. These were used on a wide variety of brands, usually 3 pin cottered cranks using Simplex's adapter plates. Condition Excellent used condition. Light cosmetic wear. Details 51 tooth 6 hole

Simplex Competition Chainring: 48t - 6-Bolt - 1940's 1950's - Chrome (EXC)

Competition chainring from the 1940's and 1950's. These were used on a wide variety of brands, usually 3 pin cottered cranks using Simplex's adapter plates. Condition Excellent used condition. Teeth have chrome wear (and on the back side one tooth is...

NOS Simplex Competition Chainring: 49t - 6-Bolt - 1940's 1950's - Chrome

Competition chainring from the 1940's and 1950's. These were used on a wide variety of brands, usually 3 pin cottered cranks using Simplex's adapter plates. Condition New old stock, minimal shop wear Details 49 tooth 6 hole

Early TA P205 Pro 5 Vis Track Chainring: 1/8" - 53t x 50.4mm - 1940's 1950's - Single Ring (EXC)

This is a very rare 1940's or 1950's Specialties T.A. pista chainring, as identified from the presence of TA's old logo.  One of the logos is a small chainring shape, the other is stamped "cegedur duralumin forge"; Cegedur being the manufacturer...

Early TA Pro 5 Vis Ref 2175 Double Chainring Set: 175 Professional Adapter + 52t / 49t - 1940's 1950's (EXC)

This is a 1940's or 1950's Specialties T.A. road double chainring set, as identified from the presence of TA's old logo.  One of the logos is a small chainring shape, the other is stamped "cegedur duralumin forge"; Cegedur being the manufacturer...

TA Pro 3 Attaches Ref 2173 Double Chainring Set: 173 Professional Adapter + 52t / 45t (Near MINT Low Miles)

"Professional" adapter and chainring set for TA "Pro 3 Attaches" crank arm (or other 116mm 3 bolt crank) with a set of TA's 6 bolt "criterium" chainrings (Ref 204 & 206). Includes original chainring bolts Condition Near mint or better with...

Antique Seatpost Binder Bolt/Nut + Cable Hanger Stop: Steel

Very old cable hanger and binder bolt set, unknown origins.  Condition Average used shape with finish wear and light rust  

Bicycle Trouser Cuff Band: Italian Circa 1940's / 1950's - Steel

Rare mid century cuff to keep your pants out of your chain while riding. It appears in the 1950 Emille Bozzi cycling catalog (see images), and was likely made in the 1940's to 1950's. They became flimsy aluminum sometime in the 70's and shortly after...

NOS Bicycle Trouser Cuff Band: Italian Circa 1940's / 1950's - Steel

Rare mid century cuff to keep your pants out of your chain while riding. It appears in the 1950 Emille Bozzi cycling catalog (see images), and was likely made in the 1940's to 1950's. They became flimsy aluminum sometime in the 70's and shortly after...

Antique Bicycle Chainstay Bumper Protector Set: Pre War? Clamp On - Rubber & Steel

These rare pieces of bicycle history clamp towards the top of each chainstay and protect them when the bike is leaned against a wall or even laid down in a crash. They resemble a taillight from a 1950's or earlier automobile. I suspect these were used...

A. Duprat Maxiplume Crank Arm: Driveside - 50.4mm - 170mm - Cottered - French 1930's 1940's 1950's - Chrome

Extremely rare orphaned drive side crank arm from Andre Duprat, circa pre-war and into the 1950's. Duprat is perhaps most known for their nickel plated hollow steel cranks that were nearly as light as alloy cranks of the era and vastly stronger...

Heart Cutout British Lamp Bracket Mount: Chrome

Beautiful lamp bracket with a heart cutout, though the manufacture is unknown. This is an antique lamp mounting bracket, for lanterns that mount on a bicycle's fork.  These were common on British bikes from the 1930's, 40's, and 50's as well as some...

NOS British Lamp Bracket Mount: Satin-like Chrome

Beautifully finished lamp bracket, though the manufacture is unknown. The chrome is a "softer" appearance than your typical bright chrome. This is an antique lamp mounting bracket, for lanterns that mount on a bicycle's fork.  These were common on...

Constrictor Conloy Lamp Bracket Mount: Alloy - 1930's 1940's 1950's

This gorgeous lamp mount featuring their snake logo is among the most sought after lamp mount to come out of the British cycling scene. This is an antique lamp mounting bracket, for lanterns that mount on a bicycle's fork.  These were common on...

Reynolds Aluminum Lamp Bracket Mount: Chrome - 1930's 1940's 1950's

Very rare and lightweight alloy lamp bracket from Reynolds. This is an antique lamp mounting bracket, for lanterns that mount on a bicycle's fork.  These were common on British bikes from the 1930's, 40's, and 50's as well as some French Randonneur...

Chater Lea Lamp Bracket Mount: Chrome - 1930's 1940's 1950's (Near Mint)

Very rare and sought after lamp bracket from Chater Lea. This is an antique lamp mounting bracket, for lanterns that mount on a bicycle's fork.  These were common on British bikes from the 1930's, 40's, and 50's as well as some French Randonneur...

40's / 50's Atom 3 Speed Freewheel: 16-22t - French Threaded 34.7 mm x 1 mm - Black/Silver (Near Mint)

Early 3 speed freewheel from Atom, with recessed removal notches below the adjusting ring. Great for your randonneuse and technical trials bikes! Likely pre-war, maybe late 1940's or early 1950's. Condition Near mint lightly used shape. The finish is...

40's / 50's Atom 3 Speed Freewheel: 16-22t - French Threaded 34.7 mm x 1 mm - Black/Gold (Near Mint)

Early 3 speed freewheel from Atom, with recessed removal notches below the adjusting ring. Great for your randonneuse and technical trials bikes! Likely pre-war, maybe late 1940's or early 1950's. Condition Near mint lightly used shape. The finish is...

J. Moyne 3 Speed Freewheel: 14-22t - 1930's/1940's/1950's - French Threaded 34.7 mm x 1 mm

Rare and high end freewheel out of St. Etienne, possibly pre-war though these were made into the 50's. These freewheels and the elusive company are little more than legend in the bicycle world, as few have heard of them and little actual details about...

1940's Cyclo 4 Speed Freewheel: 16-22t - French Threaded 34.7 mm x 1 mm (Perfect Bearings)

Pre-war or maybe late 40's into very early 1950's 3 speed French threaded freewheel from Cyclo. Pretty hard to find. This uses the earlier style notch remover with the notches flush with the adjusting ring  Great for your road racing or randonneur...

Atom 4 Speed Freewheel: 14-20t - Splined Remover - French Threaded 34.7 mm x 1 mm - Black/Gold

French Atom freewheel in 4 speed format, but with a splined remover. Condition Near mint lightly used shape. The finish is just barely wearing off the teeth suggesting quite low miles. Buttery smooth bearings. Show bike worthy Details  French...

Atom 4 Speed Freewheel: 14-22t - Splined Remover - French Threaded 34.7 mm x 1 mm - Black/Gold

French Atom freewheel in 4 speed format, but with a splined remover. Condition Great used shape. Smooth bearings, minimal finish wear on teeth except the large cog. Could be cleaned up better to look pretty nice Details  French Threaded 34.7...

Atom 4 Speed Freewheel: 16-22t - 1950's? - French Threaded 34.7 mm x 1 mm - Black/Gold

French Atom freewheel from sometime in the 1950's, maybe even Pre-war Condition Near mint lightly used shape. Buttery smooth bearings, minimal wear/dirt Details  French Threaded 34.7 mm x 1 mm 4 speed 16-22t *Used freewheels are sold...

Cyclo Gear Company Type B 4 Speed Freewheel: 15-23t - French Threaded 34.7 mm x 1 mm

French threaded freewheel from the English Cyclo Gear Company (later known as Cyclo Benelux), circa 1950's to 1960's.  Great for your road racing or randonneur bike! Condition Average used shape, smooth bearings Details  French Threaded...

Cyclo 64 4 Speed Freewheel: 14-20t - French Threaded 34.7 mm x 1 mm

French threaded freewheel from the French Cyclo, circa late 1950's to 1960's. I believe the 64 to be a date code, but this exact freewheel model was shown in a 1959 catalog with numbers after Cyclo of 54 and 56.  Great for your road racing or...

Atom 5 Speed Freewheel: 14-21t - 1950s / 1960's - French Threaded 34.7 mm x 1 mm - Black/Gold

French Atom freewheel from sometime in the 1950's through the 1960's Condition Great used shape. Buttery smooth bearings.  Details  French Threaded 34.7 mm x 1 mm 5 speed 14-21t *Used freewheels are sold AS-IS with no returns due to...

Atom 5 Speed Freewheel: 14-22t - 1950s / 1960's - French Threaded 34.7 mm x 1 mm - Black/Gold

French Atom freewheel from sometime in the 1950's through the 1960's Condition Average used shape. Bearings are a bit tight and could use an adjustment/grease Details  French Threaded 34.7 mm x 1 mm 5 speed 14-22t *Used freewheels are...

Cyclo Competition 5 Speed Freewheel: 14-21t - French Threaded 34.7 mm x 1 mm - Black/Gold

French threaded freewheel from the French Cyclo, circa 1970's. This was the stock freewheel on many years of the Peugeot PX-10 & PY-10, and a great choice for other French road racing bicycles. other road racing bike! Attractive gold bevel on...

NOS Cyclo 5 Speed Freewheel: 13-19t - French Threaded 34.7 mm x 1 mm (1970's?)

French threaded freewheel from the French Cyclo, circa 1970's. Great for your Peugeot PX-10 or other road racing bike! Condition New old stock, no signs of mounting. Slight shop wear/dirt Details  French Threaded 34.7 mm x 1 mm 5...

Cyclo 72 5 Speed Freewheel: 15-23t - French Threaded 34.7 mm x 1 mm (Barely Used)

French threaded freewheel from the French Cyclo, circa 1970's. Great for your road racing or randonneur bike! Condition Near mint barely used shape. Spins buttery smooth, just the beginnings of finish wear on teeth. Very clean, show bike...

Cyclo 72 5 Speed Freewheel: 14-24t - French Threaded 34.7 mm x 1 mm

French threaded freewheel from the French Cyclo, circa 1970's. Great for your road racing or randonneur bike! Condition Average used shape. Spins pretty smooth, but a bit loose and could use adjustment. Cogs are dirty  Details  French...

NOS Campagnolo Gran Sport Rear Derailleur: Steel Plated Bronze - 1950's - #1012/4 (Near Mint)

Nice example of the early Gran Sport rear mech. This is a 1950's version, identified via the barrel adjuster (ended sometime in the 50's) and toothless ball-bearing jockey wheels stock from those years (later 1960's and 1970's had plastic toothed...

NOS Campagnolo Record Braze-on Cable Guide: #663 (Sold Individually)

Budget classic road bike framebuilder supplies! Condition New old stock Details Sold individually #663

Campagnolo Gran Sport 1005/2 Front Derailleur: Matchbox Push Rod - 1950's - 1960's (Near Mint+)

Clean example of Campagnolo's top level front mech from 1954 (the first year the world logo appeared on this derailleur) to 1957 when the Record model was released.  The first gen was from 1951 to 1953, with the winged wheel logo.  The Gran...

Titan Luxe Quill Stem: 115mm - Belgian - Steel

Titan was a high end Belgian manufacturer of handlebars and stems from the 1930's through the late 1970's.  They are famous for developing the standard road drop bar shape, which is now referred to as the "Maes bend".  These were stock parts on...

NIB/NOS Raleigh 3/32" Loose Bearings: RML 101(?) - Vintage 1960's 1970's

Pack of 3/32" ball bearings from Raleigh circa 1960's and 1970's. This was originally a pack of 100 bearings, but it was opened and I didn't count. Estimate somewhere between 80 and 100 bearings. Condition new old stock, opened bag Details 3/32...

1940's-1970's Hub Axle Nuts & Locknuts LOT: Raleigh - Carlton - Misc French & Italian - 24 pcs

24 piece lot of track nuts, locknuts, etc. Two red Raleigh's, one Carlton, a bunch of random ones. Condition Varied used condition. See photos Details 24 nuts