NOS Milremo Zefal Course 3 Frame Pump: Size 3 ~53.5cm to 58.5cm - Grey/Black

This is a Milremo branded Zefal Course. The model name "Course" is a reference to Zefal's earlier pumps from the 1930's to 1970's, the Solibloc Course.   The "3" designates the size.  Condition New old stock, no package. No shop...

NOS Zefal Course 3 Frame Pump: Chrome / Polished - Size 3 ~53.5cm to 58.5cm

Super shiny frame pump from Zefal! The model name "Course" is a reference to Zefal's earlier pumps from the 1930's to 1970's, the Solibloc Course.   The "3" designates the size.  Condition New old stock, no package. Slight shop wear in...

NIB/NOS Zefal Course 2 Frame Pump: Chrome / Polished - Size 2 ~48cm to 53cm

Super shiny frame pump from Zefal! The model name "Course" is a reference to Zefal's earlier pumps from the 1930's to 1970's, the Solibloc Course.   The "2" designates the size.  Condition New old stock in sealed retail...

NOS Silca Impero Frame Pump & Head: 57.5cm Full / 44cm Body - Red - For L/XL Frame

Fresh Silca Impero with head in red.  Condition New old stock, no package. Mint with very minimal to no shop wear Details Body: 44cm  Total length to head end at saddles: 57.5cm uncompressed Total length compressed: 53cm Head: Silca

NIB/NOS Silca Impero Frame Pump & Head: 45.5cm Full / 32.5cm Body - Black

Fresh Silca Impero with head in black.  Condition New old stock in retail packaging!  Hardly any shop wear.  The last one purchased does not have a package Details Body: 32.5cm  Total length to head end at saddles: 45.5cm...

NIB/NOS Silca Impero Frame Pump & Head: 46cm Full / 33cm Body - Silver

Fresh Silca Impero with head in silver.  Condition New old stock in retail packaging!  Hardly any shop wear.  The last one purchased does not have a package Details Body: 33.5cm  Total length to head end at saddles: 46cm...

NIB/NOS MERCKX MOLTENI ORANGE Silca Impero Frame Pump & Head: 37.5cm Body - For ~55cm Frame Seat Tube / 52cm Top Tube

Silca Impero for your Eddy Merckx bike! Or, for fans of orange in general, Molteni Orange is a great shade. Below are sizing estimates, but do your measurements as those are only estimates Condition New old stock in retail packaging!  Hardly any...

NOS Mafac Constructeur Tool Kit: Mod 45 - Leather Pouch - Rustines Patch - 1950's - 1960's

This rare under saddle tool kit dates to the 1950's or very early 1960's.  The 1950's tool catalog shows their kits coming with this Rustine's patch kit, and the 1961 catalog shows the move to Dissoplast patch kits.  The leather case is finely...

Crank Brothers Power Mini-Pump: High Volume/High Pressure - MTB/Gravel/Road

Compact, powerful, and versatile mini pump for your backpack or saddlebag.  It has a knob on the bottom to switch from high volume mtb/gravel tires to high pressure road tires. Condition Near mint lightly used

RockShox Dust/Oil Seal Installation Tool: 32mm Stanchion Boxxer/Reba/Pile (NEW)

Seal installation tool for 32mm stanchion forks Condition New Details Model: 11 4308 722 000

Manitou Long 5mm Wrench: M1 / M2 / M3 / EFC - For Bolt inside Legs (RARE)

This is the original super long 5mm allen wrench that came with the 1990's Manitou elastomer forks.  It inserts inside the fork legs and unscrews the bolt that the elastomers float on.   Condition Lightly used, not rounded

Campagnolo Grasso 10-N 500g Grease Tub: 3/4+ Full - 1980's C-Record Era - RARE!

This is arare 500 gram white jar of Campagnolo Grasso-10-N grease from the mid to late 1980's "C-Record era".  Even back in the day, this would have been so cost prohibitive that only pro bike shops that do a large quantity of Campy builds would...

VAR 19/2 Bottom Bracket Wrench: 26mm & 28mm - For EDCO & other Cottered BB

VAR wrench for older extra small bottom bracket cups.  This is the size needed for EDCO and other cottered bottom brackets. Maybe some one piece crank too? Condition Excellent used shape

Zeus Tubular Tire Holder: Ref 19 (Near Mint)

Spare tire holder for under your saddle, by Spanish company Zeus.  Great addition for L' Eroica bikes! Condition I'm torn whether this is very lightly used, or NOS with a touch of surface rust.  Rubber feels supple, but spiderweb cracking...

Silca Impero Frame Pump & Head: Bianchi Celeste - 44cm Body (Near Mint+)

A rare Celeste colored Silca Impero, with Silca head.  Fits frame tube openings measuring ~43cm to 46cm, frame sizes loosely 49cm to 52cm (based on horizontal top tube sizing. Sizing info from 1970's ad). Condition Near mint very lightly used...

NOS Silca Impero Pump Sleeve: Silver

OEM replacement sleeve that fits under your Silca Impero's pump head.  Fits all Impero frame pumps and likely some other pumps. Condition New old stock, some have very minor shop wear Details Silver/chrome

Wheelsmith Tensiometer Spoke Tension Gauge: Calibration Chart (NEW)

The most trusted spoke tension meter on the market! Condition New in box

Park Tool TS-8 Wheel Truing Stand: Blue (NEW)

Designed especially for the home mechanic, the TS-8 allows accurate wheel truing at an economical price. Accepts wheels from 16" to 29", with or without the tire mounted. Innovative sliding dropout allows quick wheel installation, no matter what the hub...

Blackburn AS-1 AirStik Mini Pump: Dual Action (Near Mint)

Efficient dual action pump, that pumps air on both the up stroke and down stroke. Condition Near mint or better lightly used shape.  Holds air perfectly  

Silca #24.0 Brass Pump Head For Floor Pump - Vintage 1960's 1970's (EXC)

Retro brass pump head chuck for track/floor pumps from the 1960's to 1980's.   Condition Excellent to near mint used shape Details Brass

NOS(?) REG #376 Umbrella Clip / Frame Pump Mount: Chrome - No Bolt

Classy alternative to the Campagnolo #632 to hang your Silica Impero or other frame pump on your classic bicycle!  This one is the clover design cutout, without the reinforcement ring that was introduced with the CPSC in 1978 Condition Appears new...

NIB/NOS Campagnolo Grasso 10-N 1000g Grease Tub: Sealed! - 1980's C-Record Era - RARE!

This is an absurdly rare UNOPENED 1,000 gram white jar of Campagnolo Grasso-10-N grease from the mid to late 1980's.  Even back in the day, this would have been so cost prohibitive that only pro bike shops that do a large quantity of Campy builds...

Salsa Size-O-Matic Fitting Stem: Vintage SM-1000 - 25.4mm 26.0mm 26.4mm

This is the early version 1 of the famous Salsa sizing stem.  The current Salsa Size-O-Matic II is largely the same, just with the capability to fit 31.8mm handlebars.  This version comes in the tall and skinny case with a Plano Outdoor Systems...

Bell Roadside Bicycle Repair Tool Kit (NEW)

Affordable tool kit for those who prefer larger tools than a typical multitool offers Condition new Details L-shaped hex key, magnetic socket, 5 hex bits (2.5, 3, 4, 5, 6mm), Phillips head bit, flat head bit, Torx T25 bit Magnetic socket holds...

Park Tool SW-7 Triple Spoke Wrench: .127", . 130", .136"

This is the discontinued version of the current SW-7.2.  This version is easier to hold in my opinion! Condition New  

Fabric Stratosphere Pro Floor Pump Replacement/Upgrade Parts: Braided Hose w/Head - Wooden Handle & Base - Gauge - Shaft

Replacement parts lot for your premium Stratosphere Pro, or upgrade parts to make your Stratosphere a Pro!  This appears to be most of a complete pump, but the shaft is oddly too short.  I acquired all this from a shop buyout, I am unsure...

NOS Campagnolo #646 Rubber Seal Washer For Silca Impero Frame Pump Head

This is the rubber seal that goes under any pump head on Silca Impero frame pumps.  It will work with many other frame pumps as well. Condition New old stock Details Sold individually

Silca Impero Frame Pump: 1st Gen Flat Top - 1960's - Black - 46cm Body for 51cm to 53.5cm Frame (Near Mint+)

Super rare early version of the legendary Silca Impero, identified by it's motorcycle grip shaped handle with a rounded end. It was designed for use with a pump peg or umbrella clip, where as the later more common sleek cylinder handles had a cradle at...

NOS Silca Impero Frame Pump: XL Size! Silver / Metallic Gold - Silca Head - Fits ~60cm to 65cm

Killer deal on extra long Impero frame pumps!  These will fit XL sized frames roughly 60cm and larger, with openings between tubes of 55cm and 60cm. Condition New old stock, no package.  I bought these in a bulk oem box from the estate of...

NOS GT I-Drive Perfect Preload Gauge: For Sag Adjustment

Sag gauge for the early 2000's GT I Drive full suspension frames, such as the XCR and Timberline FS. Condition New old stock, no package

ROTOR BSA30 Bottom Bracket Spanner Wrench

This is Rotor's external bearing bottom bracket wrench.  It is compatible with SRAM® DUB™, Zipp® Vuma™, Race Face® Cinch™, Rotor® BSA30, Hawk Racing™ BB3086™ From the...

Fabric Accubar Pressure Gauge: Attach to Pump or Standalone - 40psi MTB/Gravel (NEW)

Attach this to your pump for accurate pressure readings every pump, or use on it's own to check your tires.  It reaches 40psi max, making it ideal for precise accuracy on low pressure/high volume allroad, gravel, and mountain bikes. From the...

Fabric Millibar Dual Head Mini Pump: MTB High Volume (NEW)

Quick and easy to use mtb trail pump!  It is small enough to stick in a pocket, and also comes with a bracket to mount to your frame. From the manufacturer The ultimate trail pumpInflate your tyres fast on the trail with the Millibar hand pump...

Fabric Microbar Dual Head Mini Pump: 120psi Road High Pressure (NEW)

A roadie fav.  It is small enough to stick in a pocket, and also comes with a bracket to mount to your frame. From the manufacturer Ultra compact yet big on power, the Microbar is the ultimate road pump. Fitting easily into your jersey pocket, it...

Park Tool PRS-1 / Schwinn S.S. Repair Stand Parts: Knob Wedges - Shaft - Pins - Grub Screw

OEM replacement parts for 1960's and 1970's Park Tool 1st gen repair stand and Schwinn Professional Repair Stands. This is most parts for the rotating levers that adjust the pivot tightness.  Two wedges, the lever shaft, and the two weird pins and...

1970's Bicycle Helmet Sizing Gauge: Skid-lid II

This appears to be a head sizing tool for the mid 1970's San Diego helmet manufacturer, Skid Lid.  It's surely useless today, but it's a weird piece of ephemera from cycling's dangerous history. Condition Excellent used shape  

Slime Tube & Tubeless Sealant: 8oz Bottle

Tubeless sealant for your bicycle or motorcycle Condition New Details 8 ounce

Phil Wood 1st Generation Hub Bearing Tool Part: 1970's

This domed cylinder tool piece is part of Phil Wood's first ever tool made, which was a bearing press/removal tool for their first gen 3 piece hubs.  There's a photo of the entire tool set, please note this ONLY includes the domed cylinder piece in...

Silca Impero Frame Pump w/ Primus Head: Fits 51cm-53.5cm Frames (Near Mint)

Super rare or custom plum purple color!  It's a pretty deep purple, and a bit metallic.  Pretty damn close color match to the purple on a Mercian King of Mercia! Lovely example of an Italian Silca Impero pump, complete with an attractive high...

Retro Rockshox Suspension Fork Oil: 1990's - Made in USA - Green Label - 5wt - 8oz

Impossible to find early edition Rockshox suspension oil.  This is from the 1990's, before the SRAM buyout and when it was still made in the USA!  Perfect if you repair vintage forks and like how this oil works better than the new stuff. ...