Campagnolo

NIB/NOS Campagnolo Record/Chorus EC-RE500 8 & 9 Speed Ergo Hoods: 1992-1997 - ORIGINAL Production - RARE

Original 1990's production hoods for 1st generation Ergopower shifters before 1998.  This includes all 8 speed Ergo and most 9 speed.  These are the levers with the more pronounced point in...

Campagnolo Nuovo Record Three Hole Front Derailleur: 1052/NT - 25.4mm Clamp (EXC+ Low Miles)

Vintage 3 hole NR front mech from the 1980's, in clamp on format for your classic steel road bike.   Condition This derailleur is really clean, but has a chrome chip on the outer cage...

Campagnolo Nuovo Record Front Derailleur: 28.6mm 1052/1 - Pre 1978 no lip

This is an early version Campy NR front derailleur, from the 1973-77.  It has no lip (introduced in 1978) or cable stop, but it has a circlip.  These are a bit less common than the later...

Campagnolo Nuovo Record Low Flange Hubset: 36H x 126mm - Curved QR - Front/Rear - BSA (Near Mint+ Perfect Bearings)

Curved blade quick releases.  Post-CSPS, made from 1978-1987.   Low flange NR/SR hubs are the gold standard training and racing hubs for classic road bicycles from the 1960's to late...

Campagnolo Nuovo Record Headset: 1960's 1970's Early Version - Strada 1039 - English (EXC+ Low Miles)

This is a tougher to find early version of the Nuovo Record headset. The locknut and crown race on the 1960's to mid 1970s headsets had smaller font and the locknut had long dashes between words...

Campagnolo "N" Wheel Dishing Tool: 1960's 1970's

This Campy wheel dish gauge is a highly visible piece in the complete Campagnolo tool kit.  It's listed in the older catalogs only as "N", and the more modern catalogs as UT-HU010 or...

Campagnolo #770 Crank Extractor / Puller Tool: Standard 22mm x 1" Size

This 1970's or 1980's Campy crank puller works on most Campagnolo, Sugino, Shimano, etc cranksets.  It is right hand threaded.  The only square taper cranks it will not fit are 1980's...

Campagnolo #770 Crank Extractor / Puller Tool: Standard 22mm x 1" Size (Near Mint)

This 1970's or 1980's Campy crank puller works on most Campagnolo, Sugino, Shimano, etc cranksets.  It is right hand threaded.  The only square taper cranks it will not fit are 1980's...

Campagnolo T-Wrench #143/2: 8mm + 6mm - 1960's 1970's Early Version (EXC)

This is an early version of the classy Campy "T" wrench. It is easily identified via the allen key shaped vertical shaft, which became a round shaft somewhere in the later 1970's. Socket wrench in...

Campagnolo T-Wrench #143/2: 8mm + 6mm - For Pedal Bearing Adjustment (Near Mint)

Classy Campy "T" socket wrench in 8mm socket + 6mm hex format.  This is what you need to adjust the bearings on your NR/SR pedals. Condition near mint lightly used...

Campagnolo #771 Seatpost Spanner: 2-bolt Campy Seatposts & Brooks Saddles (Near Mint)

A tool that was once in every cyclists repair kit and is nearly a requirement for L'Eroica rides!  This offset spanner wrench makes adjustment of the 2-pin Campy seatpost a snap.  The other...

Campagnolo Super Record Titanium Strada Pedals: #4021 - Black Cages (Near Mint)

True Super Record pedals with the Ti spindles, vs the MUCH more common Record SL Superleggeri #1037/a that are the same with steel axles. Quite rare! Condition Near mint lightly used shape. Buttery...

Campagnolo Nuovo Record Downtube Shifters: Milled + Yellow Fill - #1013 Braze

Heavily milled out Campagnolo NR/SR DT shifters with a yellow fill paint! Condition Average used condition with some cosmetic wear. Details Braze on Friction ~1967- mid 1980's

1st Gen Campagnolo Super Record 2-Bolt Fluted Seatpost: 27.2mm - 1970's - Alloy Ears (EXC)

This is a genuine 1st generation Super Record seatpost from 1973-1978.  It is distinguished from the much more common Nuovo Record two-pin seatpost with it's factory flutes, drilled out pivots,...

Campagnolo Super Record Front Derailleur: Braze On - 1052/SR (Near Mint)

Lovely braze on version of the vintage Super Record front mech. Condition Near mint lightly used shape. Near perfect outer cage, slight inner cage wear. Hardware in wonderful shape. Black parts are...

Campagnolo Super Record 4001 Rear Derailleur: Red Bullseye Pulleys - Pat 1984 (Near MINT+ Low Miles)

Exceptionally clean vintage Super Record rear mech, from the early 1980's.  The jockey wheels are nearly NOS Bullseye in red.  Classic road bicycle show worthy!  Condition Very close...

1st Gen Campagnolo "Super Record" Brake Levers: Aftermarket Drillium Front/Back < Long Reach Early NR Levers > Brown Hoods (EXC++)

This is a ~1972-1977 set of Nuovo Record long reach brake levers which has been drilled aftermarket in the format of the 1st gen Super Record levers! They're also drilled on the rear of the levers,...

1st Gen Campagnolo Super Record Headset: 1973-1975 - Italian - #4041 Strada - Italian - Alloy (Near Mint, RARE0)

Exceptionally and truly rare early Campagnolo Super Record headset! This version showed up on high level bikes in the early to mid 1970's (roughly 1973 to 1976?), and were very expensive. As such,...

1975 Campagnolo Super Record Rear Derailleur 1st Gen: #4001 (Near Mint+)

Super rare first generation Campy SR rear derailleur! These were introduced in 1973/1974 as an upgrade to the Nuovo Record. They were essentially the NR with black anodized alloy pivots, titanium...

Campagnolo C-Record Aero Seatpost: 26.8mm (Near Mint+)

The C-Record post sits at the top of Campagnolo's aero seatpost line up, which also includes Chorus, Athena, Xenon, etc.  The C-Record is easily identified at a glance. The C-Record's elbow that...

Campagnolo C-Record Brake Levers: 4th Gen 1992/1993 - Aero (EXC)

Last generation of Record brake levers, identified easily via the small round hole at the top of the blades. Condition Excellent used condition overall, with a light to scuffing to the top faces of...

Campagnolo 1st Gen C-Record / Cobalto Brake Levers: 1983-1985 (EXC)

These levers were issued with both the first generation C-Record group, and the Super Record Cobalto brakeset.  They were made from 1983 to 1986.  They are identifiable as 1st gen via the...

NOS Campagnolo 1st Gen C-Record / Cobalto Brake Levers: White Hoods - 1983-1985 (Take-Off)

These levers were issued with both the first generation C-Record group, and the Super Record Cobalto brakeset.  They were made from 1983 to 1986.  They are identifiable as 1st gen via the...

Campagnolo Record 1st Gen 8 Speed Ergo Shifters: EC-02RE CG - Double/Triple (EXC+)

This is the very first Ergopower brifter Campagnolo ever made, introduced in 1992.  It was most notably part of the last generation C-Record / 1st gen modern Record, but as this was the only...

Campagnolo C-Record 1st Gen Downtube Shifters: Pure Friction - #0118074

This is a 1st gen C-Record friction downtube shifter set.  They were issued from 1983 to 1985, and in 1986 they started making retrofriction and then Syncro indexed shifters. Condition Overall...

Campagnolo C-Record Syncro II Downtube Shifters: 6s Indexed/Friction (MINT)

C-Record Syncro 2 rear shifter, with friction front shifter.  These come with a yellow insert, which indexes 6 speed rear derailleurs. The rear shifter can switch to pure friction mode by...

Campagnolo Record Syncro 8 Speed Downtube Shifters: SL-01RE CG (MINT Barely Used)

These are the final version of Campy's downtube shifters.  These are Record (NOT C-Record), made from 1992-1994.  They have a micro-adjust knob on the rear shifter for indexing adjustment...

Campagnolo C-Record A022 Front Derailleur: Braze On - 2nd Gen 1984-1991 (Near Mint+ Low Miles)

This 2nd gen FD was made from late 1984 to 1991.  It is easily identified as 2nd gen by the flat cage plates (1992+ 3rd gen FD had a bent inner plate for better indexed shifting), mount bolt in...

Campagnolo C-Record R010 Rear Derailleur: 1990-1991 - Last Gen (Near MINT+ Low Miles)

This is the last generation of the C-Record rear mech, before they dropped the C and the gruppo became simply Record.  This model is most easily identified via 1) both pivot bolts visible and...

NOS Campagnolo C-Record SGR Cleats: Original Production (Pair)

Rare set of fresh cleats for SGR-1 pedals! These revolutionary C-Record clipless pedals are the perfect choice for 1980's vintage road bikes, and they look awesome on show bikes!  They were...

Campagnolo C-Record SGR-1 Delta Clipless Pedals: Cleats/Hardware (Near Mint+ Low Miles)

These revolutionary C-Record clipless pedals are the perfect choice for 1980's vintage road bikes, and they look awesome on show bikes!  They were among the world's first production clipless...

Campagnolo Victory/Chorus Aero Pedals: #405/000 - Toe Clips (M/L) & Straps (Near Mint Perfect Bearings)

Cool aero pedals from the mid 80's, complete with it's original Campagnolo toe clips and white/blue striped nylon straps with INOX clamps.  These are IDENTICAL to Chorus & Athena aero pedals...

Campagnolo C-Record 305/501 Aero Pedals: LG Toe Clips - 1st Gen (EXC+ Perfect Bearings)

1984 to 1988 first generation C-record pedals aero.  These are distinguished from Chorus most obviously by the toe clip mount system, but the C-Records have a much nicer build quality overall...

Campagnolo Record Superleggeri #1038/A Pista Pedals: Black Alloy Cages (Barely Used Near Mint+)

Produced from 1971 to 1985, the Record Superleggeri (SL) pedals were between Nuovo Record and Super Record on the hierarchy.   The N/R pedals had silver steel cages.  The SL pedals had the...

NIB/NOS Campagnolo Nuovo Record #1037 Strada Pedals: Chrome - Toe Clip Bolts

Produced from 1969 to 1987, these NR pedals are all shiny chrome vs the black alloy Record SL pedals. Condition: New old stock in retail box!  These are essentially pristine and untouched,...

NIB/NOS EARLY Campagnolo Record Pedals w/ Strap Loop: #1037 (1950's 1960's)

The elusive early model Record pedals with toe strap loops, in all their chromed glory.  These are pretty tough to find, especially in nice shape.   And boy are these nice.  These were...

NIB/NOS Campagnolo Record Superleggeri #1038/A Pista Pedals: Black - Toe Clip Bolts - Track

Produced from 1971 to 1985, the Record Superleggeri (SL) pedals were between Nuovo Record and Super Record on the hierarchy.   The N/R pedals had silver steel cages.  The SL pedals had the...

NIB/NOS Campagnolo FH-SC015 9/10/11/12 Speed Freehub Body: Standard Axle 12mm

This freehub body is for Campy hubs with standard 12mm axles. Condition New in box Details Fits: Standard axle Campagnolo Centaur. Veloce, Khamsin, Vento, Scirocco, Fulcrum Racing 5, Fulcrum...

Campagnolo #713 Pedal Wrench 15mm / Fixed Cup BB Spanner Tool

Cool combination 15mm pedal wrench and bottom bracket fixed cup wrench. Condition Average used shape with some wear.  

Campagnolo #712 Bottom Bracket Lockring Adjusting Tool / Headset 32mm Wrench (EXC)

Classic Campy wrench for installing, removing, and adjusting your headset and BB.  Wrench end is 32mm.  From the 1960's through 1990's. Condition Excellent lightly used shape. ...

Campagnolo Fork Crown Race Remover #729: For 1" Fork Crowns (Near Mint)

Rare Campy crown race remover tool!  These are invaluable when working with vintage steel bicycles.  They're one of the best ways to remove a race without damaging it or the fork crown...

Campagnolo Freewheel Tool: "I Handle" + #704 Reducer Bit For 14t (EXC)

Earlier steel I handle and 704 freewheel tool for 14t cog freewheels. Condition Excellent used shape, some patina. Details Steel handle 704 bit for 14 & 15 tooth small cog...

Campagnolo "R" Derailleur Alignment Gauge Tool - Part # IT-VS030 (EXC)

Legendary Italian version of the Park Tool DAG.  Stands out visibly in the Campy tool box. Condition Excellent used shape!  It has a nice light patina, and the screw spins nicely...

NIB/NOS Campagnolo Nuovo Record #1046/A Bottom Bracket: 114.5mm X 68mm English (Take off)

BB for 1977-1987 Nuovo Record Strada crankset, at 114.5mm long English threads.  Rifled thick cups.  The spindle is a world logo.   Condition New old stock, take off.  It...

1st Gen Campagnolo " No Record" Nuovo Record Strada High Flange REAR Hub: 36H x 126mm (EXC Perfect Bearings)

This is a first generation "Nuovo" Record rear hub! It was made from 1960 to 1963, and is just like the later and more common NR hubs, but lacks the word "RECORD" under the Campy "World" logo...

NIB/NOS Campagnolo Pawl / Spring Holder Tool: #7260223

One of the two tools needed to hold your pawls and springs in while installing on Campy freehub bodies.  This is needed for your C-Record and similar hubs. Condition New in package

Campagnolo Nuovo/Super Record Crank Arms: #1049/A: 172.5mm - Dust Caps - 1980s

Mid 1980's NR/SR strada crank arms for your L'Eroica bike build or your backup fancy bike Condition Non-drive arm is near mint, driveside has a bit more wear and is probably very good.  Both...

Campagnolo C-Record Self Extracting Crank Bolts: Chrome (EXC, Pair)

These were used on all generations of C-Record cranksets. This set is slightly mismatched—one says Brev Int. and the other Made in Italy. Condition Excellent used shape. Slightest tool wear...