Modern Bike Components (2010 & Newer)

Swift Industries Merlin Randonneur Handlebar Bag: 15L - Black (Near Mint+)

The discontinued 15 liter Merlin carries a serious amount of gear in style. It is quite similar to the Swift Industries Peregrine (formerly Ozette), just taller. Condition Just barely used, near mint or better. Hardly any wear except a bit of dirt...

Rockshox Boxxer World Cup 26" DH Fork: 26" - 2005 - Grey - 20mm Thru Axle

Legendary downhill fork from Rockshox circa 2005. This was the first year with the beefy magnesium legs and clearance up to 26x2.8". Condition This one has some battle scars in the paint, but works well. It feels pretty smooth, though is a little bit...

TRP TR25 Centerlock Rotor: 160mm Two Piece (New, Installed on Hub)

TRP’s two-piece rotors offer superior heat dissipation due to the aluminum center as well as excellent stiffness to provide you with confidence in your braking and lighter weight.  Two-piece is now combined with TRP’s new slotted rotor...

TRP TR43 6-Bolt Rotor: 160mm Two Piece (New, Installed on Hub)

TRP’s two-piece rotors offer superior heat dissipation due to the aluminum center as well as excellent stiffness to provide you with confidence in your braking and lighter weight.  Two-piece is now combined with TRP’s new slotted rotor...

Thomson X2 Road Stem: 1 1/8" x 100mm x 31.8mm - 10D - Black (NEW)

Discontinued X2 stem from Thomson, a lighter version of the X4 intended for road use. Condition New in package, very slight shop wear Details Bar clamp size: 31.8mm Steerer clamp: 1 1/8" Stem Length: 100mm Rise: 10 degree Clamp: 4 bolt Type:...

Paul Boxcar Stem: 70mm x 15D x 31.8mm - Pink / Black (Near Mint+)

Cool pink and black colorway on the legendary . Made in the USA, lighter & stronger than Thomson! Condition Near mint or better with low miles. Hardly a mark, though the pink ano is a bit faded   Details 1 1/8" threadless 70mm x 15...

Shimano XTR PD-M980 SPD Clipless Pedals: Titanium

Bulletproof and lightweight XTR pedals from the 10 speed era.  These are just barely heavier than the current M9000 pedals, and were built with durability in mind.   Condition Great used shape. Bearings are buttery smooth, though the...

Shimano XTR PD-M970 SPD Clipless Pedals: Titanium

Bulletproof and lightweight XTR pedals from the 9/10 speed era.  These are just barely heavier than the current M9000 pedals, and were built with durability in mind.   Condition Great used shape. Bearings are buttery smooth, though the...

ZIPP Tangente QR Skewer Set: 85g - Black Ano - Stainless Steel (NEW)

Sleek high end skewers from ZIPP. Only 85 grams per set! Condition New Details Front and rear, 100mm x 130mm Black anodized Weight: 85g / set

RavX Pace Bolt-On Wheel Skewer Set: Black Ano (NEW)

Locking wheel skewers to prevent your wheels from being stolen and save weight. They weigh a scant 132g per pair Condition New Details Front and rear Black anodized

NIB/NOS Shimano Dura Ace FC-7800 10sp Inner Chainring: 39t B - 130mm BCD

Inner ring from the 10 speed Dura Ace 7800 group.  130mm BCD fits standard road double 8/9/10 (and some 11) speed cranks of most brands. Condition New in sealed retail packaging Details BCD: 130mm 39 tooth

Shimano Right SPD-SL Pedal Axle: #43298010 (NEW)

Replacement OEM spindle for your Shimano clipless pedals. I THINK this is for SPD-SL pedals, but I'm not certain. Do your research on this with the model number, or gamble the half of retail $10 Condition New in sealed package

Mavic UST Tubeless Valve Kit: Pair (NEW)

Set of two Mavic tubeless valves and hardware Condition New

Sram Pitstop Grease in Syringe for Ceramic Road Pulleys: 10ml

Pitstop grease for your ceramic road pulleys in a convenient 10ml syringe applicator Condition New Details Part number: 00.7915.018.010 MSRP: $14

Birzman Chain TRAVEL KEEPER Dummy Hub Tool : REAR AXLE 130-135mm (NEW)

This gizmo keeps your chain in place when a wheel is not in the frame. Great for cleaning your bike, working on it, or travel. Condition New in package Details Model: BM09-PO-ACK-01-K

Galfer Wave 180mm Disc Rotor: 6-Bolt (Very Low Miles)

Bargain price on a barely used six bolt rotor. Condition When I photographed these I thought it was a new take-off with hardly a sign of pads touching it, but in the pics they look slightly more used than that. Very low miles either...

Maxxis Freeride Tube: 26" x 2.20/2.50 - Presta (NEW)

Thick and durable tube for DH, freeride, enduro. Condition New, no box Details 26x2.20/2.50 Presta

Easton Havoc 35 Direct Mount Stem: 45mm / 50mm x 35mm - Black

Bargain priced bolt on / direct mount stem for 35mm bar clamp. Adjustable length Condition Average used shape with some cosmetic wear

BMX Parts Lot: 4 Pegs + Right Odyssey Brake Lever + Spank Grips + Title Gyro + Race Face Ride 31.6mm Seatpost

Bargain basement price on a pile of modern BMX parts Condition Average to great used shape, see pics. Sold AS-IS Details Seatpost: 31.6mm x 165mm

EXT Spring Coil: 140 x 350mm (Near Mint+ Barely Used)

High end coil from EXT Condition Near mint or better barely used shape. Very minimal miles and marks Details 140x350mm

EXT Spring Coil: 117 x 375mm (Near Mint Low Miles)

High end coil from EXT Condition Near mint lightly used shape. Very minimal miles and marks Details 117x375mm

EXT Spring Coil: 117 x 350mm (Near Mint+ Barely Used)

High end coil from EXT Condition Near mint or better barely used shape. Very minimal miles and marks Details 117x350mm

Cane Creek DB Coil Rear Shock: 9.5 x 3.0" / 241x76mm - 500lb Spring

Highly rated coil shock from Cane Creek. I believe this is a ~2019 model.  Condition Excellent used shape with some cosmetic wear. No leaks. Details 9.5 x 3.0" (241x76mm) Springs: Cane Creek 500x3.0 Eyelet hardware included:None

Canfield Bikes AM/DH REGULAR Chainring: 36t - SRAM 3-Bolt Direct Mount

Standard tooth profile ring for SRAM direct mount cranks Condition Heavy cosmetic wear, a touch of visible tooth wear. I THINK it has some lift left in it but no promises. So take this silly cheap price and gamble, it's AS-IS with no refunds...

Canfield Bikes AM/DH REGULAR Chainring: 38t - SRAM 3-Bolt Direct Mount (New Take-Off)

Standard tooth profile ring for SRAM direct mount cranks Condition New, take off. Barely any marks Details 38t

SRAM Force / Rival Flat Mount Disc Brake Caliper Lot of 3 (New Take-Off)

Set of three SRAM flat mount disc brake calipers. There's two Rival's and a Force Condition New, take off.

Shimano XT BR-M755 Front Disc Brake: Black/Silver (No Pads)

Front disc brake from the late 9 speed / early 10 speed era. Condition Excellent used shape with some wear. No pads Details Hose: 855mm

Hayes Stroker Carbon Hydraulic Disc Brakeset: Grey

High level brakeset from Hayes, older generation. Condition Very good to great used shape with some wear. ~90% pad life left. Lever blades are very clean Details Hose length: 1580mm / 810mm

Shimano Dura Ace RD-7900 Rear Derailleur: 10s - Grey (<100 Miles Near Mint ++)

Smooth shifting and wild aesthetics from the last 10 speed Dura Ace rear mech.  Its weird to see the original H.R. Geiger Alien styled derailleur become "outdated" and affordable, but this is where we are in the world.   Condition Near...

Garmin Flush Out Front Mount: Edge - Right (New)

Sturdy mount for your Edge computers! Mounts on right side of stem to have computer inline with stem. Condition New, no package Details Fits 25.4mm, 26.0mm, 31.8mm bars with included shims Black Includes garmin mount only

Tektro RX 2.0 Inline Cross Top Brake Levers: 23.8mm - Black/Polished (NEW)

Inline brake levers for the flats of your cx bike, townie, or road bike.  This is the smaller 23.8mm clamp size, that fits bars with 25.4mm/26mm/26.4mm clamps or some 31.8mm bars that taper down  after the clamp area. Condition  New, no...

Race Face Chester Flat Pedals: Blue - DH / Freeride / Commuter - Blue - 9/16" (NEW)

Popular flat pedals from RF! Condition New in box Details 9/16" Blue

Puroma Flat Platform Pedals: BMX / DH / Freeride / Commuter - Turquoise - 9/16" (NEW)

Highly ranked and affordable sealed bearing flat pedals! Includes pins for traction. Condition New Details 9/16" Turquoise

Locking Security Seatpost Binder Collar + Saddle Clamp Bolt: 28.6mm Clamp

Don't want your saddle and seatpost stolen off your commuter? This set replaces your saddle clamp bolt (for most one-bolt from the bottom seatposts) and your 28.6mm seatpost binder collar. Condition Looks to be very lightly used in retail...

Origin8 Single Speed Freehub Kit For Cassette Hubs: 10 Spacers - Red/Black (NEW)

Sandwich your cog between these spacers to convert your cassette hub to singlespeed with the perfect chainline. Condition New

3T Forgie Threadless Stem: 120mm x 25.8mm (25.4mm & 26.0mm) - Big Rise - 1 1/8" w/ 1" Shim

High rise 80 degree (20 degree) threadless stem. The 25.8mm bar clamp fits both 25.8mm and 26mm handlebars Condition New in box  Details 1 1/8" threadless Ahead-style, includes shim to fit 1" forks Length: 120mm Bar clamp: 25.8 Rise/drop:...

Ritchey WCS 4-Axis Threadless Stem: 1 1/8" x 110mm x 31.8mmm - 6D Degree - Ti Bolts (New take-off)

Top quality alloy road/mtb stem out of Tom Ritchey's workshop.  This one weighs a scant 120g, and features titanium bolts. Condition New, take off. No box Details Length: 110mm Bar clamp: 31.8mm Rise/drop: 6 degree 4 bolt clamp Black w/...

3T ARX-Pro Threadless Stem: 110mm x 31.8mm - 6D - Black (Near Mint+ LOW Miles)

6 degree version of the much loved no nonsense road stem in Pro kit. I like this older (~2016) more than the ARX II because the newer one swaps out the two 4mm steerer clamp bolt for one torx bolt. Who wants to carry a torx bit on a road...

27.5 MTB Plus Wheelset: 32H - 10s Shimano - WTB Scraper / Race Face ARC 35 - DT Swiss 350 - Boost 15x110mm + 135mm QR - 2.8" Tires Specialized Butcher + Vee Bulldozer

Budget priced mix n' match set of 650b Plus mountain bike wheels.  Key metrics are Shimano/SRAM 10 speed freehub, 35mm I.D. rims, Boost thru axle front & QR 135mm rear. Great for older frames with updated Boost fork, or just use them on...

27.5 Hifi Hootenany MTB Plus Wheelset: 40mm I.D. - 32H - XT FH-M788 11s - 12x142mm (Barely Used Near Mint+)

This is a discontinued Hootenany40 wheelset with 40mm I.D. rims (confirmed by Co-founder Bre Rue) for 27.5+ bikes, DH/Freeride/Enduro, etc with minimum tire width of 2.5". These are great for your 27.5x2.6 & 27.5x2.8" tires. The rear hub is a...

Deda Elementi Zero100 Classic Stem: 1 1/8" x 120mm x 31.8mm x 8D/82D - Black (EXC+)

Black version of the popular Deda Zero 100!  Condition Excellent or better lightly used shape. Very minor wear. Details Bar clamp size: 31.8mm Steerer clamp: 1 1/8" Stem Length: 120mm Rise/drop: 82 / 8 degree Clamp: 4 bolt Type:...

Cane Creek Helm Air MKII 27.5 Fork: 160mm - Boost 15x110mm - Tapered - Black (Near Mint)

2nd generation Helm, solid trail and all-mountain fork at 160mm travel. Condition Near mint or better very lightly used shape. Action, compression, and rebound feel perfect with no leaks. Very minimal cosmetic wear, the only things worth noting are...

Park Tool CCP-4 Crank Puller Tool For Splined BB: ISIS / Octalink

The CCP-4 is specifically designed to remove crank arms from Shimano® splined, oversized, "Pipe Billet" bottom bracket spindles and ISIS systems that do not use a "One Key Release" system. It uses a long handle and a fine thread for the leverage...

Park Tool CCP-22 Crank Puller Tool

The CCP-22 is a purpose-built tool for removing crank arms from bicycles with three-piece cranks that use an M8 crank bolt, including common square tapered cranks, SRAM® PowerSpline® cranks, FSA® Power Drive cranks, and BNI cranks on...

Hozan 205 Lockring Wrench for Bottom Bracket & Headset (Near New)

Easy tool to tighten/remove lockrings from your headset, bottom bracket Condition Just barely used

NIB/NOS DIA-COMPE 2001 Straddle Cable Carrier/Hangers: Pink Ano - DC 988 / 990 (PAIR)

These unique straddle cable carriers came stock on high end MTB/BMX cantilever and U-brakes in the 1980's and 1990's, such as the 988 and 990. They're anodized a pretty violet pink color. They're great for wild colorful townies, cruisers, and 1990's...

Velo Orange Grand Cru Cartridge Square Taper Bottom Bracket: 110.5mm x 68mm English (Near Mint+)

High quality and affordable cartridge BB Condition Near mint barely used shape. Buttery smooth  Details Threads: English Length: 110.5mm JIS taper

Phil Wood Rear Classic Road Hub Shell: High Flange - 32H - Silver (NEW)

Fresh road hub shell, sans any hardware.  This is for the Road Classic high flange, thread on freewheel  Condition  New, never laced.  Still has the blue transluscent plastic over the center.   Details 32H Silver