ODI Mushroom Mountaineer Grips: Vintage 1980s MTB Made in USA (Near Mint)

Rare all-terrain mountain bike version of the venerable ODI Mushrooms, which ruled the 80's old school bmx world.  These are great for your retro mountain bikes, and even your klunkers. Condition Near mint very lightly used.  Rubber is supple...

Ringle Ti Stix QR Skewers Set: Black - Ultralight Version of Holey - Front/Rear (Near Mint+ Low Miles)

These were some of the hottest quick release skewers in the 1990's! Introduced in 1992 in their "Holey" MTB version only and then this "road" version in 1993. The only difference is instead of just the drilled holes in the middle of the milled out...

Chris King No Logo 1" NoThreadSet Threadless Headset: Silver - Vintage 1990's (Near Mint++)

Early version of the threadless CK headset.  These first generation NoThreadSet features blank cups with no logos, and date to about the mid 1990's.  Fairly rare and gives your retro mtb / roadie restoration a bit more period correct cool...

Control Tech Stix Team Issue Bar Ends: L Bend - Gunmetal Blue/Grey - Vintage 1990's (Near Mint+)

Team issue version of Control Tech's Control Stix mtb bar ends.  These were all the rage in the 1990's.  The team model features a much sharper bend than the Lite series.  The Lite's extension was a bent tube, whereas the Team is a...

NOS GT Hadley Barrel Front Hub: 32H - Made in USA - Red Anodized Vintage 1990's - Zaskar Xizang

U.S. boutique company Hadley made GT's hubs for a while in the mid 90's and early 2000's.  They were regarded as some of the best hubs you could buy, up there with Chris King and Hope.  This one has a wonderful anodized finish and amazingly...

Adventure Components AC Team Issue Fork Brace Arch: Manitou 2/3/4: Black Ano CNC

Hard to find fork brace to fit Manitou two / three / four forks from the early to mid 1990's.  This is their stiffer team issue version, vs the standard version that was deeply milled out on both sides for lower weight Condition Very close to mint...

TNT HDS Crank Arms: Polished + Green Ano Spider - 175mm x 110/74mm (BARELY USED Near Mint++)

VERY rare Canadian made TNT Performance Products Hard Drive Series crank, vintage mid to late 1990's! The HDS model was aimed at DH racing, or heavy/strong riders. It has a solid "dome" shape flange to fit the spider, vs the Light Drive Series (LDS)...

Early Bradbury / Manitou One M1 Split Crown: 1" (EXC)

This crown is from an Answer Manitou M1, and is fully compatible with Manitou M2, M3, M4, and EFC.  Split crown and quad bolt style was used on the Manitou One and some of Doug Bradbury's pre-Answer Manitou forks. Condition Excellent used...

Paul MiniMoto Mini V-Brake Set: Black (Almost New, Missing Noodle)

Radical limited edition 3D Violet anodized set of Paul Component MiniMoto mini v brakes!  These are designed for use with road brake levers or cantilever levers, both of which are short pull.  These are immensely popular for cyclocross bikes,...

NOS Hunt Wilde BMX Mini Grips: Blue - 7/8" - Old School 1980's

Popular Made in USA grips from the late 1970's to mid 1980's BMX scene.  Great for your Mongoose Motomag, Schwinn Sidewinder, etc Condition New old stock, supple.  Barely a speck of dirt Details For 7/8" bars Jr. size

Anti-Theft Locking Skewer Set: Titanium - 135mm - Silver (NEW)

Easy way to protect your wheels from getting stolen! This replaces a standard quick release and secures with a hex bolt so it can't be taken off just by flipping the lever. Condition New Details Front and rear Rear Spacing: 135mm Titanium

Front Locking Skewer: Titanium + Green Ano - 1990's? (EXC)

Easy way to protect your front wheel from getting stolen! This replaces a standard quick release, and secures with a hex bolt so it can't be taken off just by flipping the lever. Condition Excellent used shape Details Front Spacing:...

Sachs Odyssey Svelte Rear QR Skewer: 130mm - Silver - Vintage 1990's

Cool wire handled quick release from the 1990's.  These were made by both Sachs and Odyssey, I'm not sure there is a single difference between them. Condition Very good to great used condition with some scratching.  It looks much better in...

Salsa Flip Off's REAR QR Skewer: 135mm - Black (NEW)

Every bike deserves Salsa's Flip Off skewers!   Condition New, no package Details Rear only Black Spacing: 135mm  

Salsa Flip Off's QR Skewer Set: No Logo Vintage - 130mm - Blue

1990's version with no logos and a slightly different lever blade profile.  Condition Great used condition with some little scrapes.  Very clean.  Front skewer lever is faded a bit Details Front and rear Cobalt blue 

Paul Cross Lever: Right - 26.0mm - Inline/Interrupter (Near Mint+)

The Paul Cross Lever is designed to be run on it's on for on the tops road drop bar setup, or as an inline lever secondary to a standard road lever.  They work with both short and long pull brakes (v-brake, cantilever, mechanical disc)...

Paul Cross Lever: Left - Black/Silver - 31.8mm w/ 26.0mm Shim- Inline/Interrupter (Near Mint+)

The Paul Cross Lever is designed to be run on it's on for on the tops road drop bar setup, or as an inline lever secondary to a standard road lever.  They work with both short and long pull brakes (v-brake, cantilever, mechanical disc)...

Jeff Lyon L'avacaise Randonneur Frameset: 56cm x 54cm - 700c - Fillet Brazed Ultralight Steel - Paint Matched Pump (NM+ LOW MILES)

Drop dead gorgeous randonneuse frame, handbuilt in Oregon by Jeff Lyon and painted by the master, Keith Anderson.  This was built up and ridden just a handful of miles. I bought it for myself and realized it's just too small to build for myself...

NOS Bill Davidson Custom "Path Racer" Lugged Frame/Fork: 60cm - 28mm w/ Fenders - Columbus SL/SP - Dual Taper Stays - 72D / 72.5D - 1970's Decals (Built, Never Ridden)

*Bill and Mark found the geometry sheet!  I've updated the geometry and added more metrics (I was off ever so slightly on a couple), and the geometry sheet is in images too* This highly custom frame was among the last lugged frames Bill Davidson...

Bontrager Titec Titanium MTB Flat Handlebars: 1990's

These bars were all the rage in the 90's, and subsequentially these were found on many top end mountain bikes!  They can be used with either a 22.2mm BMX stem, or with shims for 25.4mm stems (Not included, but available readily for under...

Manitou Long 5mm Wrench: M1 / M2 / M3 / EFC - For Bolt inside Legs (RARE)

This is the original super long 5mm allen wrench that came with the 1990's Manitou elastomer forks.  It inserts inside the fork legs and unscrews the bolt that the elastomers float on.   Condition Lightly used, not rounded

Manitou Two (M2) Fork: 1" Threaded - Fresh Rebuild? (Near Mint)

Released in 1993, the Manitou 2 was the first of the Answer-Manitou forks to gain this colorful and playful graphics, a stark diversion from the grey and black monochrome of the M1 and earlier Bradbury forks.   Condition Near mint cosmetics,...

NOS SRP Titanium Shimano V-Brake Upgrade Kit: Deore/XT/XTR - Mounting Bolts/pad bolts/nuts/cable pinch/Spring Tension (Sold in Sets for One Brake)

Sleek ultralight upgrade kit for your Shimano Parallel Pull v-brakes. These were designed with the high end XTR BR-M950 / BR-M952, but will work with most other Shimano V-brakes and likely other brands.  To name a few, XT BR-M750, XT BR-M760,...

1963 Schwinn Stingray Knobby Tire: 20" x 2.125 Tire: S2 - Goodyear - Made in USA - Blackwall (NEAR MINT)

This Stingray Westwind Knobby tire made by Goodrich dates to the last quarter of 1963, making this among the very first Stingray tires ever made!  These were used on the Stingray through 1964. If you are restoring an early Stingray, you know how...

KCNC K3 Cobweb Chainring: 24t x 104mm MTB Double Inner / 1x - Black (Near Mint Low Miles)

High spec and radical looking chainring from boutique brand KCNC.  They're CNC machined to the max from 7075-T73 aluminum, and have the spiderweb look.  This is the one for weight weenies!  Designed as a mountain bike double crank's inner...

KCNC K3 Cobweb Chainring: 38t x 104mm MTB Double Outer / 1x - Black (Near Mint Low Miles)

High spec and radical looking chainring from boutique brand KCNC.  They're CNC machined to the max from 7075-T73 aluminum, and have the spiderweb look.  This is the one for weight weenies!  Designed as a mountain bike double crank's outer...

1979 Mongoose Motomag BMX Survivor: 100% Original! Unrestored Show Bike - Winner's Circle - Quilted Saddle (EXC)

*Sale fell through, it's available again!* This unrestored and original Motomag is 100% stock to catalog spec! It has all four of its original reflectors in excellent condition, and even the chainguard! Paint and decals are original, backed up by the...

USE Spin Stix Titanium QR Skewer: Rear 130mm - Blue - 1990's

From the maker of the famous U.S.E. Alien seatpost, this rare 1990's skewer uses a spin and ratchet tightening mechanism.  It has it's original ultralight spindly springs, if you need them for one of your other more popular skewers...

Salsa Flip Off's QR Skewer Set: Silver Mismatched - 135mm - No Logo

Every bike deserves Salsa's Flip Off skewers!  This set consists of a modern polished front QR with the logo removed and a vintage rear with it's beveled blade surface. Condition Average used shape.   Details Front and rear Spacing:...

Salsa Flip Offs Front QR Skewer: Burnt Orange - No Logo - Vintage 1990's

Every bike Salsa's Flip Off skewers!  This is an early version with no decal and a contoured lever blade.     Condition Great used shape with some scratches and scrapes Details Burnt orange anodized FRONT quick release skewer...

Salsa Lip Lock Seatpost Collar: Red Ano - 32.0mm (Near Mint+)

Everyone's favorite seatpost clamp collar for modern and retro bikes alike.   Condition Near mint to mint. Details Diameter: 32mm I.D.  Stainless steel pivot Red anodized

Thomson Elite X4 Road Stem: 1" - 120mm x 26.0mm x 5D - SM-E122 - Cam Bolt (Near Mint)

Old style Thomson, with the cam style steerer clamp. Condition Near mint lightly used shape. Minimal wear. Details 100x26mm 5 degree 1" threadless Black Model: SM-E122  

Thomson Elite X4 MTB Stem: 1 1/8" - 100mm x 25.4mm x 5D - SM-E101 - Cam Bolt (Near Mint)

Old style Thomson, with the cam style steerer clamp. Condition Near mint lightly used shape. Minimal wear. Details 100x25.4mm 5 degree 1 1/8" threadless Black Model: SM-E101  

Salsa Flip Off's QR Skewer Set: Silver (EXC+)

Every bike deserves Salsa's Flip Off skewers!   Condition Excellent used shape, some general wear Details Front and rear Silver Stainless  

Paul Cross Lever: Left - Black - 31.8mm - Inline/Interrupter (Near Mint)

The Paul Cross Lever is designed to be run on it's on for on the tops road drop bar setup, or as an inline lever secondary to a standard road lever.  They work with both short and long pull brakes (v-brake, cantilever, mechanical...

Jim Merz Water Bottle: Black - 1980's - Specialized (EXC)

Rare original Jim Merz bottle with the famous oval logo. This Specialized bottle was the premier bidon of the era that the vast majority of manufacturers and shops printed on. Condition Excellent used shape.  Light cosmetic wear throughout bottle...

Jim Merz Water Bottle: Black - 1980's - Specialized (Near Mint)

Rare original Jim Merz bottle with the famous oval logo. This Specialized bottle was the premier bidon of the era that the vast majority of manufacturers and shops printed on. Condition Near mint lightly used shape.  Light cosmetic wear, perfect...

Jim Merz Water Bottle: Semi-Translucent Yellow - 1980's (CRACKED)

*Super bargain on this display only bottle. There's a hole and cracks at the very bottom of the bottle.  Rare original Jim Merz bottle with the famous oval logo. This Specialized bottle was the premier bidon of the era that the vast majority of...

NOS Voodoo Cycles Bash Guard Ring: 104mm x 44T - Red - Cutouts - Snakes & Flames

Heavy duty and elaborate bash ring! It's quite thick,and features a shaped edge to ward off damage.  Elaborate cutouts, engraved snakes and flames. Includes mounting bolts Condition Nos, no shop wear Details BCD: 104mm Max chainring size: 44...

Wheelsmith Tensiometer Spoke Tension Gauge: Calibration Chart (NEW)

The most trusted spoke tension meter on the market! Condition New in box

Phil Wood Tandem (Rear Disc) Wheelset: Velocity Cliffhanger 700c x 36H (NEW Take-Off)

This is a gorgeous tandem wheelset, that is compatible with the Phil Wood rear disc hub!  The rear hub is designed specifically for the Phil Wood disc brake but can also be used with road caliper or cantilever brakes.   The rims are...

1990's Land Shark Road Shark Fillet Brazed Steel Frameset: 55cm - 2 Forks - Original Space Microbe-Themed Paint - Gem Tone Red/Purple/Blue

Microorganisms in Space! This wild ultra-boutique fillet brazed steel road bike was handmade and painted by John Slawta in Oregon, circa early to mid 1990's.  This is a pure road/race machine, no fender eyelets here! It comes with the original steel...

NIB/NOS Scott Mathauser Superbrake BMX Finned Pads: Silver - 1st Gen (Set/4)

1st generation Mathauser finned pads for old school bmx bikes from the 1970's!  Set of four pads.  All original hardware included Condition New old stock in original factory sealed package Details Two pairs (enough for two...

Ringle Zooka 1" Quill Stem: 3DV Purple Ano + Turquoise Decals - 135mm x 25.4mm (Near Mint)

Sleek purple anodized vintage 1990's mtb stem for your retro mtb restoration!  Condition Near mint lightly used shape.  Quite minimal marks.  No fading on the stem or faceplate, though top of top cap is faded into a pink.  Extension...

Chris King ThreadFit 24 Bottom Bracket: Black (NEW)

The Chris King external threaded BB works for various cranksets with a 24mm spindle, from Shimano Hollowtech II, SRAM GPX, etc.  Condition New Details Includes Fit Kit #4 24mm version Black, color code AAB1 MSRP: $192

1970's Blackburn Tubular Bottle Cage: Vintage TA REF 215 Style - Alloy - 35g - Black/Red - PAIR (Near Mint)

These are Jim Blackburn's first bottle cage model from the 1970's!  It's style is just like the TA tubular steel cages with plastic end, just in alloy.  This is a wonderful lightweight and period correct bottle cage for your classic road bike,...