Brake Levers

Campagnolo Super Record Brake Levers: #4062 - White Hoods

Drillium Super Record levers with original last generation white hoods. Condition Average used shape with plenty of cosmetic wear, but still fully functional! Hoods are functional and supple but ugly and have hinge tears. Details Non-aero right...

DIA-COMPE New Gran Compe NGC-202 Brake Levers: Champagne Ano! Dual-slotted - Non-aero

The NGC202 was DIA-COMPE's top of the line non-aero brake lever in the 1980's. These have two rows of slanted slots milled into each blade, the "GC" logo engraved at top, and a cutout on the sides. This pair is special as it's anodized a bronze /...

NIB/NOS Zeus Super Alfa 71 Centerpull brakeset + Half Hood Brake Levers: Cream Hoods - Cables/Carriers/Stops - Mafac/Universal 61 Clones

This is a rare high end brakeset Zeus put out in the early to mid 1970's. The half hood brake levers are faithful clones of the Mafac half hood levers (with the addition of a prominent and pretty hash texture on the blades). Presumably the hoods would...

Campagnolo Nuovo Record Brake Levers: #2030 - NOS GUM Hoods (Near Mint+)

3rd generation NR levers from ~1978-1985. This is the only generation with the shorter reach levers. Brev Camp in pivots Comes with a set of mismatched Shield logo gum hoods, tan and brown. Condition Near mint or better lightly used shape levers plus...

Campagnolo Nuovo Record Brake Levers: 1st Gen #2030 - NOS GUM Hoods (Near Mint

Rare set of first gen NR levers, identified by the round hole on the back of the blades vs the later (and MUCH more common) lever's "U" shaped opening.  The lever blade is also slightly different, with a bit more bend producing a LONG reach and a...

Campagnolo Super Record Brake Levers: #4062 - Brown GUM Hoods (Near Mint & One w/ Scrape)

Drillium Super Record levers with their original brown/tan gum hoods. Condition One lever is near mint or better with barely a mark, the other has a scrape down the outside but otherwise near mint shape.  The gum hood on the scraped one is supple...

Campagnolo Super Record Brake Levers: #4062 - Brown GUM Hoods (Near Mint+)

Drillium Super Record levers from their 2nd generation circa ~1976-1983. These come with their original brown/tan gum hoods. Condition Near mint or better lightly used shape. Levers have some tiny marks but none significant.  Hoods are supple and...

Campagnolo Super Record Brake Levers: #4062 - White Original Hoods (Mint LOW MILES

Drillium Super Record levers from their third generation circa 1984 to 1987. These are identified by their white hoods, no markings in lever pivots, and shield logo clamps. Condition These are so clean I almost thought they were NOS. They're mint with...

Campagnolo Olympus MTB Gruppo w/ 8s Icarus Shifters: Graphite/Black - 175mm x 46/36/23t - Long Cage - Adj. FD Clamp - Canti - Thumbies

Rare Campy Olympus Off Road mountain bike groupset from 1991, in graphite black. The Olympus group didn't have it's own shifters so it came with either the Icarus thumb shifters (included) or  Bullet shifters. Condition Mixed used shape. The...

Shimano XTR ST-M950 8-speed Rapidfire Shifters / Brake Lever Combos (Near Mint)

Clean set of 8 speed XTR gunmetal grey shifters! The ST-M950 was made in 1996 and 1997, and in 1998 they released the ST-M951 (which was the same shifter but modified to work with the new SL-SS95 remote shifter). Condition Near mint lightly used...

Shimano XTR ST-M950 8-speed Rapidfire Shifter / Brake Lever Combos (Near Mint+ Low Miles)

Exceptional example of 8 speed XTR gunmetal grey shifters! The ST-M950 was made in 1996 and 1997, and in 1998 they released the ST-M951 (which was the same shifter but modified to work with the new SL-SS95 remote shifter). Condition Near mint or...

NIB/NOS Shimano Dura Ace EX BL-7200 Brake Levers & Gum Hoods: Drilled - Vintage 1970s 1980s

Rare untouched set of EX levers with original tan gum hoods! The Dura Ace EX group ran concurrently with the wild aero 7300 Dura Ace AX series, circa ~1978 to 1984.  Condition New old stock in sealed retail package. Hoods feel great and show no...

Tektro RX 2.0 Inline Cross Top Brake Levers: 23.8mm - Black/Polished (NEW)

Inline brake levers for the flats of your cx bike, townie, or road bike.  This is the smaller 23.8mm clamp size, that fits bars with 25.4mm/26mm/26.4mm clamps or some 31.8mm bars that taper down  after the clamp area. Condition  New, no...

Shimano Dura Ace SW-7971 Di1 10s Bar End Shifters + BL-TT79 TT Brake Levers: Carbon

Matching set of Dura Ace 7900 series Di2 bar end shifters and time trial brake levers. Condition Shifters are almost mint. I was told they work just fine, but I have no way to test them. Levers are excellent. Somehow the inside face of the left lever...

Machine Tech Zero Flex QL Right/Rear Brake Lever: Vintage 1990's Cantilever - Silver

These rad levers were made in the USA from ~1996 to 1997 (via MOMBAT Timeline).  They released with the Machine Tech Zero Flex Cantilever brakes, and were reviewed as some of the best performing mtb brake levers of the era.  They are much...

Campagnolo C-Record / Croce D'Aune Powergrade Brake Levers (LOW MILES Near Mint++)

3rd/4th gen Corsa Record brake levers from 1987-1991.  These came with Delta brakes, and feature the Powergrade adjustment capabilities.  The Croce D'Aune and C-Record Powergrade levers are the same. The lever blades seem shinier than normal, I...

Shimano XTR ST-M950 8-speed Rapidfire Shifter / Brake Lever Combos (Near Mint)

Clean set of 8 speed XTR gunmetal grey shifters! The ST-M950 was made in 1996 and 1997, and in 1998 they released the ST-M951 (which was the same shifter but modified to work with the new SL-SS95 remote shifter). Condition Near mint very lightly...

NOS Gipiemme Azzura / Crono Sprint Brake Levers: Snakeskin Pattern! Same As Modolo Professional

These rare and unique levers are Gipiemme's 2nd from top of the line, just below the drilled Crono Special. They were made by Modolo, and are essentially the same as Modolo Professional levers. They have the large knurled pivots, both Modolo and GPM's...

Balilla Mod 61 Brake Levers: Freshly Polished (Near Mint++)

Top of the line levers from the 1960's and 1970's, made by Universal. One of the lever blades has an extra hole drilled by the cable head holder on just one side of the lever, not sure what that's about. These don't have clamps, but they have clamp bolts...

Universal Mod 61 Brake Levers: Freshly Polished (Near Mint++)

Top of the line levers from the 1960's and 1970's.  These were also available with Balilla logos, and are often used to replace the inferior Mafac brake levers. These have been polished on every surface including blades, bodies, barrel adjusters...

NIB/NOS Galli Criterium Brake Levers: Red Ano - Drilled - Gum Hoods - RARE

RARE red version of the 1980's Galli Criterium levers. These are seen occasionally in silver and gold, but almost never in red. The lever blades are drilled on the lower half's front and sides and Galli logo engraved vertically at the top.  These...

Paul Cross Levers: Left/Right Pair - 31.8mm - Silver (NEW)

The Cross Lever is an inline brake designed for use on the flat upper section of drop handlebars. It can be used with short-pull or long-pull brakes and road bars. Obviously popular on cyclocross bikes.  They're also a great safety feature for...

Odyssey Monolever Right/Rear Brake Lever: Medium - Polished (New)

Classic BMX lever with smooth lines form BMX'ers and singlespeed use Condition Brand new in package Details Right/rear only Polished / silver Lever size: Medium

NOS MAFAC Twin Cable Tandem Half Hood: Cream White / Beige (Single Hood)

SUPER rare hood for the Mafac double cable brake lever! Condition New old stock! Supple, not cracking/dry. The expected shop dirt Details One hood

NOS MAFAC Half Hood: Cream White (Single Hood)

Lovely single creamy white original Mafac half hood.  These are from the 1950's, 1960's, or 1970's (there's no way to determine the age as they were the same their whole run).   Condition New old stock, still has the price tag on the...

NOS MAFAC Course / 2000 Brake Levers w/ 1 Brown Full Hood

This set of Mafac levers comes with one pristine full hood in brown with barrel adjuster and barrel adjuster cover! Racing levers to fit both half hoods (Course model) and full hoods (2000 model).  The model of these is determined by the hood and...

Mafac Course 130 Promotion Brake Levers: White Plastic Body & Barrel Adjusters - Hoodless Design (EXC+)

These surprisingly sleek brake levers are called both the Promotion and the Course 130 brake levers in Mafac literature from the 1970's and 1980's.  They were designed to be ridden without hoods, and thus have a smooth and continuous derlin plastic...

NIB/NOS MAFAC Racing Brake Levers: Twin Cable Tandem + Standard - For Half or Full Hood (Pair)

This is a lever set consisting of one twin cable lever and one standard single cable lever.  The twin cable lever is designed to control two brakes from one lever, and was marketed to tandem bikes (particularly when running both a drum brake and rim...

NIB/NOS MAFAC Course / 2000 Brake Levers: For Half or Full Hood (Pair)

Racing levers to fit both half hoods (Course model) and full hoods (2000 model).  The model of these is determined by the hood and the barrel adjuster.   Condition: New old stock in oem bag with model tag.  Pristine. First set...

Mafac Course 121 Competition Half Hood Racing Brake Levers: Polished (Near Mint+, Dry Hoods)

This are the half-hood Mafac professional racing Course 121 levers from the 1960's, 1970's, and into the 1980's.  This is the racing version identified by the small adjuster barrels, vs the competition with larger barrels.  This pair has been...

NOS Campagnolo C-Record Graphite Powergrade Brake Lever: Single - 3rd/4th Gen

This is a single C-Record PowerGrade brake lever in the increasingly rare "Graphite" finish.  The Graphite was a darker grey than the Century finish, which was only offered at the Record level. These were issued with both later generation Delta...

NOS Mafac Tandem Dual Cable Brake Lever: Course 121 - 1950's 1960's

This lever is designed to control two brakes from one lever, and was marketed to tandem bikes (particularly when running both a drum brake and rim brakes).  These are a half hood design, and the hoods with 2 cable holes are extremely rare...