OLD LOGO Cinelli Campione Del Mondo Mod 66 Handlebars: 39.5cm x 26.4mm - 1960's / 1970's - Shield/Crest - Drilled

These are a rare early version of the famed Campione Del Mondo road drop bars. The mod. 66 has more drop than the 64 Giro D' Italia.  This bar has the "old logo" Cinelli shield crest on one side of the clamp area, and Mod Campione Del Mondo in a...

WTB RM-2 Dirt Drop Handlebars: 25.4mm - Moderate Flare - Vintage 1980's + 1990's - Nitto Made (EXC)

These are OG WTB dirt drops from the 1986-1996 production run! These are killer for retro dirt bar mtb's, cyclocross, randonneuring, and monstercross bikes.  They match well to the Salsa Pro-Moto high rise dirt drop stems, and any other stem...

WTB RM-2 Dirt Drop Handlebars: 25.4mm - Moderate Flare - Vintage 1980's + 1990's - Nitto Made - Polished (EXC+)

These are OG WTB dirt drops from the 1986-1996 production run! These are killer for retro dirt bar mtb's, cyclocross, randonneuring, and monstercross bikes.  They match well to the Salsa Pro-Moto high rise dirt drop stems, and any other stem...

Specialized IV X-2+2 Riser Handlebars For Early Stumpjumper: 630mm x 22.2mm - 98mm Rise - Heat Treated

Tough to find bombproof riser bars from the early Stumpy!  Various versions of the IV riser bars were stock on 1981, 1982, 1984, and 1985 Stumpjumper (the 1983 typically had bullmoose bars).  These were 22.2mm clamp, to be used with the early...

White Brothers Ti Bar: DH Riser Titanium Handlebar - 660mm x 25.4mm w/ Shim - Vintage 1990's

Ultra rare riser bar from White Bros, circa 1990's.  These have a nice 660mm uncut length.  They look really similar to the Titec Hellbender ti, but with a slightly higher/sharper rise.  Perfect for your retro mtb restoration!  These...

NOS McMahon Racing Cycles (MRC) Titanium Handlebar: Flat Bars - 575mm x 25.4mm Polished Ti (No Shim Required)

Super rare titanium bar from 1990's American builder Steve McMahon of McMahon Racing Cycles.  This one is a 25.4mm clamp diameter.  The early 1990's MCR bars required a shim, and I could guess this one is a little later since it's shaped out to...

Carbon Flat Bars: 25.4mm - Raw Weave - MTB Handlebars- 124g (Near Mint+)

These rad bars show their beautiful braided carbon fiber weave throughout, with a durable clear coat over the top.  Brand is unknown, but they seem well made. Possibly a custom builder of sorts, as raw carbon weave never really made it to market for...

Profile Design Airstryke Aerobars: Clip on - L2 Flip Up Arm Rests - 31.8mm & 26.0mm - Black (New)

Popular clip on aero bar setup for your road, triathlon, and time trial bikes!   Condition New, no package but comes with instructions (not photographed).  Just a touch of shop wear in the form of ano wear on the extensions.  Elbow...

Profile Design Cobra Wing Carbon TT Base Bar: 42mm- Black (New w/ shop wear)

Popular base bar for your time trial and triathlon setups.  Budget priced as it has some shop wear! Condition New on package, but it's been handled roughly and has a few little scratches and a clear coat chip on the underside near a cable routing...

Mavic 357 Aero Bars / TT Handlebar Extension Kit: 1980's to early 1990's - Black (EXC++()

Very rare time trial aero bars from 1989 to about 1994(?).  Many think these are the bars Greg Lemond beat Laurent Fignon in the 1989 Tour De France, and that makes sense because his had the Mavic decal.  In reality, Lemond was riding prototype...

OLD LOGO Cinelli Campione Del Mondo Mod 66-42 Handlebars: 42cm x 26.4mm - 1960's / 1970's - Shield/Crest - Drilled

These are a rare early version of the famed Campione Del Mondo road drop bars. The mod. 66 has more drop than the 64 Giro D' Italia.  This bar has the "old logo" Cinelli shield crest on one side of the clamp area, and Mod Campione Del Mondo in a...

ITM 101 Hi_Modulus Carbon Road Drop Handlebars: 42cm x 42.8mm - Black (New)

High end carbon drop bars, with generous reach and drop.  Classic bend, similar to the Merckx bend of olden days but tweaked to function better with brifters.  Dual cable routing guides. Condition New and never installed on a bike, but a stem...

NOS Velox Rubber Handlebar End Plugs: Black - No Logo (Sold In Pairs)

Perennial favorites of road cyclists, Randonnneur's, and tourists' alike.  One quantity will get you one pair of end plugs.  Buy the remaining stock and you can have the card. Condition New Old Stock Details Pair (includes two plugs,...

Nitto Craft B125 NJS Track / Keirin Handlebar: Chrome Steel - 40cm x 25.8mm (NEW)

These are the shallower drop version of the more common B123.  Chrome plated steel (the B125AA is alloy).  True NJS certification for Keirin racing! Condition New, no package Details 40mm wide  Clamp: 25.8mm to fit both 25.4mm and...

Nitto M172 SSB Drop Handlebar: 38cm x 31.8mm - Ultralight 291g - Shallow Drop & Anatomic Bend - Silver w/ Wreath Crests (NEW)

These ultralight Nitto handlebars are made from thinwall tubing that saves ~100 grams over standard Nitto handlebars such as the Noodle bars.  These weigh the same as the Compass / Rene Herse "superlight" handlebars  Slightly ergonomic bend...

Soma Highway One Road Drop Handlebars: 44cm x 26.0mm - Silver (NEW)

The Soma HWY-One handlebar is the only short & shallow compact drop bars in 26.0mm clamp on the market.  They have a lovely round curve to the drops, and a subtle polished finish with subdued logos. Condition New in retail package Details 440mm...

Custom Painted Flat Handlebar: Black & White Textured Splash Effect - 610mm x 25.4mm (NEW)

Super rad custom painted steel handlebars! The pattern is highly intricate and has a textured look.  Great for cruisers, fixies, early mountain bikes from when steel bars were the norm, etc Condition New Details Clamp: 25.4mm Width: 610mm uncut...

Nitto B123 NJS Track Handlebar: Chrome Steel - 380mm (Near Mint)

Classy and popular NJS approved pista bars from Nitto.  These come with cork bar end plugs installed for a clean look. Condition Near mint lightly used condition.  Very clean, the only marks to note are light scuffs around the outside of the...

Antique Lauterwasser Handlebar: 1930's Path Racer - Steel - VERY RARE (Exceptional)

This is an original 1920's or 1930's vintage Lauterwasser bar!  These are absurdly scarce, and when they do pop up they're typically covered in rust.  This one is in excellent shape, with an even patina and a decent shine. Lauterwasser bars...