Clearance 50% to 80% Off!

NOS Rockshox Boxxer LEFT Fork Decal / Nameplate: ORIGINAL 2003-2004 (Non-Driveside Only, Sold Individually)

These are ORIGINAL Rockshox-produced hard stick-on logo plates that came on ~2003-2004 Boxxer DH forks.  Peel off the wax paper backing and stick them on your fork leg, and your Boxxer will look good as new! (well, they're not magic.  They...

NIB/NOS Christophe Protective Toe Clip Edge Cover: Rubber - Enough For Two Clips

These little rubber covers slip over the uprights of your toe clips to protect them from scuffing and to protect you from getting cut on the metal in a crash.  To install, you fold them lengthwise and the slit opens up, and place it over the front...

NOS Huret Shifter Mount: Right - 28.6mm Downtube - Allvit / Svelto For Schwinn

This is a downtube mount clamp for a right shifter, Svelto and Allvit models (probably others).  This shifter was used heavily on Schwinn lightweights (Continental, Traveler, World...) and even Stingrays. Condition New old stock Details Part...

Hayes Stroker Ryde Brake Pads: 98-21976 - No Spring (Sold in Pairs)

Genuine Hayes replacement pads for your Stroker Ryde brakes Condition New Details Pair Spring NOT included Model: 98-21976 

Avid BB5 EVO Organic VX Disc Brake Pads (Sold in Pairs)

Blowout price on high quality organic Avid BB-5 brake pads! Condition New, in plastic bags (came to me in bulk box) Details Sold in pairs (two pads, one spring) MSRP: $13

Evo Fork Mount Carrier: 15mm x 110mm Boost (NEW)

Bolt this to your truck bed, floor, etc to mount your bike securely via it's thru axle. Condition New in box Details 15x110mm boost

Huret Jubilee Downtube Shifters: Clamp On - 1970's - Black Covers (Near Mint)

1970's version of the gorgeous Jubilee downtube shifters!  These are on a clamp mount, though they can be run on braze on frames with standard Campagnolo shifter plates.  One of the most ornate and pretty shifter sets IMO.  The end caps...

Sram X9 Front Derailleur: 2x10s - 34.9mm - Top Swing Dual Pull (NEW)

Solid mountain bike front derailleur from Sram's mid-upper level group. Condition New in box, some shop dirt/dust Details low clamp (top swing) 34.9mm Dual pull Silver

xustar ARC11+ Look Keo Cleats: Anti-Slip - 7 Degree - Red/Black

7 degree float cleats for your Look Keo pedals Condition New

Reynolds SMS Steel Tubing Button: "I'm The Sporty One" - Advertising from Trade Show - 1980's

This button was handed out at trade shows such as Veloswap and the NYC Bike Show to advertise the Reynolds SMS tubing, whatever it is.  The internet can't really agree what it is, though some forum posters suggest it's straight gauge 0.8mm tubing...

REG Bicycle Reflector: Red - Vintage 1960's 1970's - Alloy Back - L Bracket

Shiny and pretty reflector from REG of Italy.  Likely 1960's to 1970's. Condition Excellent shape! Reflector part is very clean with no cracks or fading, back is clean, edges have some finish patina.  

1970's Blackburn Tubular Bottle Cage: Vintage TA REF 215 Style - Alloy - 35g - Black/Red - PAIR (Near Mint)

These are Jim Blackburn's first bottle cage model from the 1970's!  It's style is just like the TA tubular steel cages with plastic end, just in alloy.  This is a wonderful lightweight and period correct bottle cage for your classic road bike,...

Shimano(?) 11 Speed Cassette: 11-28t - 260g (EXC)

This cassette is missing its lockring, and isn't marked with a make/model.  It looks like a mid level Shimano. Condition Excellent lightly used shape Details 11sp 11-28t

NIB/NOS Shimano Dura Ace MF-7400 7-speed Freewheel: 13-19t

Untouched freewheel from the DA 7sp 7400 group for your show bike or L'Eroica bicycle.  Intended for friction systems and will work with most friction setups. Racer's special 13-19t corncob gearing. Condition New old stock in original box with...

Soubitez Motobecane Headlamp: Black Plastic w/ Clear Lens - Dynamo Bicycle / Moped

This headlight has both the Motobecane M logo and the Soubitez logo on the lens.  It's a great modern-ish choice for your French randonneur, or even your moped. Condition Excellent used shape

Hayes MX2/GX2 Sole Disc Brake Pads: #98-20197 (Pair)

OEM Hayes pads for your MX, GX, and Sole series disc brakes Condition Brand new in package Details Pair (for one brake) Fits MX2 / MX3 / MX4 / MX5 / CX5 / Sole / GX2 & others

Kool Stop Tectonic V-Brake Pad Inserts: Carbon - Black (Sold in Pairs)

Replacement brake blocks to fit Kool Stop Tectonic linear pull brake pad cartridges.   Condition New Details For carbon rims Sold in Pairs (two pads per 1 quantity)

Fabric Stratosphere Pro Floor Pump Replacement/Upgrade Parts: Braided Hose w/Head - Wooden Handle & Base - Gauge - Shaft

Replacement parts lot for your premium Stratosphere Pro, or upgrade parts to make your Stratosphere a Pro!  This appears to be most of a complete pump, but the shaft is oddly too short.  I acquired all this from a shop buyout, I am unsure...

Nashbar Women's MTB Cycling / Spin Shoes: Size 39 / 8.5 US - Two Bolt Cleats - Walkable - Grey/Black (Almost New)

Affordable clipless shoes for spin class, mountain biking, commuting. These feature grippy tennis shoe-like soles with recessed cleats to make walking feel like you're not even wearing cleats. Condition Nearly new. I was told these were ridden twice...

K3 Fin Aero Seatpost Race Number Holder : Stainless Steel

This number holder secures your race tag to your aero seatpost.  Adjust the stainless steel holder on the pointy rear end of your post (and rest assured that your seatpost will be protected by the thick rubber pad), and secure with the included...

K3 Geo 2 Seatpost Race Number Holder : Stainless Steel - All Round Posts Sizes 25mm to 34.9mm

This number holder secures your race tag to any round seatpost.  Just bend the stainless steel half plate to conform to your seatpost size (and rest assured that your seatpost will be protected by the thick rubber pad), and secure with the included...

SRAM X4 9 Speed Rear Derailleur: Black - Long Cage (NEW)

Affordable and reliable derailleur for SRAM 7/8/9/10 speed shifters with 1:1 ratio  Condition New in box Details Long cage

NOS Rockshox Foam Rings For Psylo & Duke: 30mm Stanchion (Pair)

Fresh foam filter rings for Rockshox Psylo and Duke circa ~2001 to 2003 Condition New old stock. These came to me in an oem bag.  They will be shipped without packaging unless you purchase our remaining stock. Details Part #110-0060580-50

NOS Rockshox Judy / Ruby Spring Spacer For 80mm Travel: 430-001310-01 (Pair)

This is a pair of NOS spring spacers for ~1998-2002 Rockshox Judy and Ruby forks using 80mm travel.  Check this manual to determine this is for your year and model Condition New old stock Details Sold in pairs Part...

Bianchi By Magistroni Cottered Crank: TA REF 173 Adapter & Old Logo TA 104/106 Chainrings: 3-Pin - Script Logo - Fluted + Cutouts - 170mm x 52/48/44t Triple

This scarce 1950's and 1960's crank was made by Magistroni (Curtis Odom told me this).  They are pretty unique, featuring double flutes on the arms, cutouts on the spider arms, and a scrolly Bianchi logo in place of the more common print type. ...

Mad Alchemy Non-Warming Oil Embrocation: For Warm Weather & Insect Repellent - 120ml

Our basic warm weather embrocation is a simple, crisp, non-warming muscle rub with mint and eucalyptus essential oils. The Grapeseed, Soybean, and beeswax base nourishes your skin while protecting it from the rigors of sport. Grapeseed oil works...

Mad Alchemy Pre-Ride Warming Oil Embrocation: 120ml

Warming PRERIDE Oil Capsicum and Cinnamon Oils dole out a significant, but not overwhelming layer of heat. - New lighter feel with all the warming power of our traditional embrocation.- Use under tights or on bare legs.- Works excellently on unshaved...

Huret Jubilee Downtube Shifters: Clamp On - 1970's - Black Covers (MINT)

1970's version of the gorgeous Jubilee downtube shifters!  These are on a clamp mount, though they can be run on braze on frames with standard Campagnolo shifter plates.  One of the most ornate and pretty shifter sets IMO.  The end caps...

TA 3 Pro Attaches Crankset: 170mm x 52/42t - 3 Bolt 116mm - English - Dust Caps (Near Mint++ Low Miles)

This 3 bolt Professional road model crankset is one of the nicer three pin aluminum cranks from the late 1960's and 1970's.  It was the biggest direct competitor to the rare Campagnolo Gran Sport 3 arm crank.  The 116mm BCD chainrings for these...

Nike Granfondo WRX Carbon Women's Road Cycling Shoes: Size 37EU - Two & 3 Bolt Cleats - Walkable - Grey/Black (NEW w/stains)

These shoes combine the walkability of the WR model with a stiff carbon fiber sole for increased performance. From the manufacturer Use either 2 Bolt or 3 Bolt cleats. The WRX (Walkable Road Xchange) Granfondos blend the performance qualities of...

Nike Granfondo WR Women's Road Cycling / Spin Shoes: Size 37 - Two Bolt Cleats - Walkable - Grey/Black (NEW)

Affordable clipless shoes for spin class, mountain biking, commuting. These feature grippy tennis shoe-like soles with recessed cleats to make walking feel like you're not even wearing cleats. Condition New in box, never even tried on Details Size:...

Sidi Spark Carbon Women's Road Shoes: Size 38 1/2" - Grey/White/Blue (NEW)

Affordable 3 bolt road cycling shoes from Sidi. Condition New in box, never even tried on Details Size: 38.5 EUR, 6.75 US Synthetic leather upper Closure with two Velcro straps Reflective accent on the label above the heel...

Shimano Ultegra 11s ST-6800 STI Name Plate & Fixing Screw: FRONT/LEFT - Y00F98020

OEM replacement faceplate for Ultegra 11s shifters from the 6800 group.  Includes fixing screws. Condition New in factory sealed package Details Includes (one) faceplate and (two) fixing screws. Left hand

NOS GT I-Drive Perfect Preload Gauge: For Sag Adjustment

Sag gauge for the early 2000's GT I Drive full suspension frames, such as the XCR and Timberline FS. Condition New old stock, no package

Maxis Modular Valve System (MVS) Stems: 48mm - Sold in Pairs

The Maxxis Modular Valve System allows you to easily customize your bike. The separation of the tube and valve stem allows you to choose your valve length without having to deal with finicky valve extensions. When the tube eventually needs to be...

ROTOR BSA30 Bottom Bracket Spanner Wrench

This is Rotor's external bearing bottom bracket wrench.  It is compatible with SRAM® DUB™, Zipp® Vuma™, Race Face® Cinch™, Rotor® BSA30, Hawk Racing™ BB3086™ From the...

Rotor Q 53t x 130mm 5 Bolt Aero Outer Chainring: 11s - EXT A For 39t Inner - Oval (NEW)

This outer ring is to be matched with a 39t inner From the manufacturer If looking as fast as you feel influences the way you ride, then our wind-shucking aero Q Rings allow you to orient your chainrings around your riding style...literally. Q Rings...

Rotor Q 39t x 130mm Inner Chainring: 11s - Oval (NEW)

This is the lightest style of QRing, in 130mm road double format.  ROTOR has discontinued the 130mm rings. From the manufacturer Powering up steep canyon roads, and barreling back down on arcing alpine tarmac is all in a days work for you. Every...

Rotor Q 54t x 110mm 5 Bolt Aero Outer Chainring: 11s - EXT A For 42t/44t Inner - Oval (NEW)

This outer ring is to be matched with either a Q42t or Q44t inner From the manufacturer If looking as fast as you feel influences the way you ride, then our wind-shucking aero Q Rings allow you to orient your chainrings around your riding style.....

Rotor Q 53t x 110mm 5 Bolt Aero Outer Chainring: 11s - EXT B For 38t Inner - Oval (NEW)

This outer ring is to be matched with a 38t inner From the manufacturer If looking as fast as you feel influences the way you ride, then our wind-shucking aero Q Rings allow you to orient your chainrings around your riding style...literally. Q Rings...

Rotor Q 42t x 110mm 5 Bolt Inner Chainring: 11s - Oval (NEW)

This is the lightest style of QRing.   From the manufacturer Powering up steep canyon roads, and barreling back down on arcing alpine tarmac is all in a days work for you. Every muscle movement has been trained to lay down the hammer,...

Rotor Q 39t x 110mm 5 Bolt Inner Chainring: 11s - Oval (NEW)

This is the lightest style of QRing.   From the manufacturer Powering up steep canyon roads, and barreling back down on arcing alpine tarmac is all in a days work for you. Every muscle movement has been trained to lay down the hammer,...

NOS/NIB Sugino Aero Mighty Chainring: 52t x 144mm Outer

Sugino Aero Mighty ring in a slick vinyl bag.  The Aero Mighty was a top level slightly more rounded crank in Sugino's 1980's racing line Condition New old stock in retail slip package, pristine Details BCD: 144mm 52t large outer ring

NIB/NOS Crud Claw Cassette Cleaner Gizmo Gadget: Retro 1990's Weirdness - Black Anodized

This little trinket from the wild and weird early 1990's attached to your dropout under your quick release, and weaved through your cassette cogs to clean the mud and gunk as you pedal.  Did they work? I don't know. Never used one myself.  But...

Yaroslav Popovych Race to Replace Discovery Trek Team Artwork One-Off Painted on WOOD: 36" x 24" x 10mm Thick (MINT)

In 2006, Trek Discovery Channel was on the hunt to find a replacement for Lance Armstrong as team leader after he retired.  This artwork series was made in commemoration.  It's more common form is plain ol' paper posters, but this one is...

Tom Danielson Race to Replace Discovery Trek Team Artwork One-Off Painted on WOOD: 36" x 24" x 10mm Thick (MINT)

In 2006, Trek Discovery Channel was on the hunt to find a replacement for Lance Armstrong as team leader after he retired.  This artwork series was made in commemoration.  It's more common form is plain ol' paper posters, but this one is...

Paolo Savodelli Race to Replace Discovery Trek Team Artwork One-Off Painted on WOOD: 36" x 24" x 10mm Thick (MINT)

In 2006, Trek Discovery Channel was on the hunt to find a replacement for Lance Armstrong as team leader after he retired.  This artwork series was made in commemoration.  It's more common form is plain ol' paper posters, but this one is...

George Hincapie Race to Replace Discovery Trek Team Artwork One-Off Painted on WOOD: 36" x 24" x 10mm Thick (MINT)

In 2006, Trek Discovery Channel was on the hunt to find a replacement for Lance Armstrong as team leader after he retired.  This artwork series was made in commemoration.  It's more common form is plain ol' paper posters, but this one is...