Shimano

Shimano FH-RM66 Freehub Body w/ Fixing Bolt & Hub Shell Spacer - 8/9/10 Speed (NEW)

Replacement freehub body for Shimano 8s, 9s, and 10s hubs Condition New in sealed bag Details Part number: Y3TD98040

Shimano Tiagra ST-4500 2 x 9 Speed STI Shifters: Front/Rear (EXC)

Affordable set of 9 speed shifters. Condition Excellent used shape with some cosmetic wear. Shifting feels wonderful. Left hood does have a tear on the side (shown in pics)

Shimano Dura Ace 7800 Hubset: 32H - 10s - Silver (Near Mint)

Clean set of Dura Ace hubs from the first 10 speed group.  Condition Near mint lightly used shape. Bearings and freehub are buttery smooth. Center shells are almost mint. Some spoke hole wear...

Shimano Dura Ace BR-9000 Brakeset: Dual Pivot - Black/Silver (Low Miles Near Mint)

Majorly updated brakes over the 10 speed series. Condition: Near mint with very low miles. Minimal cosmetic marks, the only ones worth pointing out are very light scratching on the forward facing...

Shimano Dura Ace FD-7900 Front Derailleur: 10s - Braze On (LOW MILES Near Mint+)

Clean 10sp front derailleur, with the dark grey stylings of the last 10 speed generation. Condition Near mint or better with very minimal cosmetic marks. Details Double Braze-on

Shimano Dura Ace FD-9000 Front Derailleur: 1s - Braze On + 28.6mm Adapter Clamp (EXC+)

Clean front derailleur, with the black and silver stylings of the 1st 11 speed generation. Braze on model, with OmniRacer adapter clamp in 28.6mm. Condition Excellent or better lightly used shape...

Shimano Dura Ace RD-9000 Rear Derailleur: 11 Speed (Near Mint)

Smooth shifting and smooth looking derailleur from the DA 9000 11 speed groupset.   Condition Near mint lightly used shape. The left lower knuckle and the housing around the cable cinch...

Shimano Dura Ace FC-9000 Double Crankset: 172.5mm x 53/39t - BB (Near New <50mi)

Top shelf practically new 11 speed era Dura Ace crankset and Hollowtech II bottom bracket! Condition Almost new with less than 50 miles on it.  The only real wear is light scratching below "URA"...

Shimano Dura Ace ST-9000 STI Shifter: FRONT/LEFT - 2x - No Hood (EXC+)

Clean front STI brifter from the 11 speed Dura Ace 9000 group. No hood. For an easy good enough replacement, the Ultegra ST-6800 hoods fit 90% with some slight gaps if you look close...

Shimano Dura Ace ST-9001 STI 11s Shifter: RIGHT/REAR (EXC++)

Clean rear 11 speed shifter with hood. The ST-9001 is the exact same shifter as the ST-9000 except its very slightly narrower in the hand. Condition Excellent to near mint condition. Quite minimal...

NOS Shimano Downtube Cable Stop For Bar End / STI Shifters: Double - 1 1/8" Downtube - No Bolt/Nut (Many Available)

This clamps on your downtube to stop the cable housings when using bar end shifters or brifters. Condition New old stock, no packaging. These don't come with a bolt/nut, use your own standard ones...

NOS Shimano Bottom Bracket Cable Guide: Single - 1 1/8" Downtube - No Bolt/Nut (Many Available)

This shift cable guide mounts on your standard 1 1/8" downtube at the bottom bracket and guides your derailleur cable. Includes original clamp bolt and nut Condition New old stock, no packaging...

NOS Shimano Bottom Bracket Cable Guide: Single - 1 1/8" Downtube - Original Bolt/Nut (Many Available)

This shift cable guide mounts on your standard 1 1/8" downtube at the bottom bracket and guides your derailleur cable. Includes original clamp bolt and nut Condition New old stock. These came to me...

NOS Shimano Chainstay Cable Stop / Guide: No Bolt/Nut (Many Available)

For those of you with frames lacking a braze on cable stop for your rear derailleur, this clamps onto your chainstay to provide one.  It fits the standard 5/8" chainstays that the vast majority...

NOS Shimano Dura Ace Top Tube Cable Clips: Set/3 - 1970's - 1980's - Screw/nuts

Nice finishing touch for your Shimano equipped vintage road bike!  These were released with Dura Ace 7200, AX/EX, 7300, and 7400 with minimal changes. Even if you don't have Shimano they're a...

NOS Shimano BMX & Centerpull Brake Pads: MX / DX / Tourney / DA (Set of 4)

Rare NOS pads from late 1970's and 1980's BMX, centerpull, and some road caliper brakes such as the Tourney BR-MX10/MX20, Tourney BR-TS10/30/40/60, 1st gen Dura Ace centerpull, etc. These will fit...

NOS Shimano Tourney RD-TY10 GS Rear Derailleur: Long Cage

This long cage road / touring derailleur is friction only and shifts up to 34t cogs easily. This was stock equipment on countless entry level bikes in the 1980's and 1990's. Condition New old stock,...

Shimano 600EX SL-6208 Downtube Shifters: 6 Speed - Braze (MINT)

6 speed shifters from the 1980's 600 EX groupset in braze on format. Condition Mint or very close to it lightly used shape. Details Rear: 5 / 6 speed indexed or friction Front: double or triple Type...

NIB/NOS Shimano Light Action SL-A400 Downtube Shifters: 7 Speed

Rare set of downtube shifters from the Light Action / Exage 300EX group circa early 1990's or very late 1980's. Condition New old stock in sealed retail package Details Rear shifter: 7 speed indexed...

Shimano Dura Ace FD-7410 Front Derailleur: Braze-On (EXC)

7410 was the final version of the 7400 group, and was made for a year or two.  It's practically identical to the 9-speed FD-7700.  This one officially came with an 8 speed group, but will...

Shimano Dura Ace FD-7400 Front Derailleur: Braze-On

6/7/8 speed Dura Ace derailleur.  One of the only models with the Dura Ace name engraved on the top of the body.  Works with any level of Shimano shifter.   Condition Average used...

Shimano 600 EX Arabesque FD-6200 Front Derailleur: 28.6mm

The 600EX Arabesque group is easily identifiable by it's scrolling engravings on all it's parts.  The group was made from 1978-1984.  Condition Very good to great used shape with some...

Shimano 600 EX Arabesque FD-6200 Front Derailleur: 28.6mm (Near Mint)

The 600EX Arabesque group is easily identifiable by it's scrolling engravings on all it's parts.  The group was made from 1978-1984.  Condition Near mint lightly used shape. Minimal...

Shimano 600 EX Arabesque RD-6200 Rear Derailleur: Short Cage (Low Miles EXC+)

The 600EX Arabesque group is easily identifiable by it's scrolling engravings on all it's parts.  The group was made from 1978-1984.  The group is often preferred over Dura Ace 7400 due to...

Shimano Sante FD-5000 Front Derailleur: 28.6mm Clamp Mount (Low Miles Near Mint+)

Rare 6/7/8/9 compatible speed Dura Ace derailleur. Sante  was a high end semi-pro kit situated right below Dura Ace 7400 and above Shimano 600/Ultegra 6400. Its finish is a pearlescent white...

Shimano Sante 7s Groupset: Crank / Derailleurs / Shifters / Brakes / Levers - 170mm x 53/42t (Mostly Low Miles EXC-Near Mint, Excluding Levers)

Rare Shimano Sante groupset from the late 1980's! This group was a high end semi-pro kit situated right below Dura Ace 7400 and above Shimano 600/Ultegra 6400. Its finish is a pearlescent white with...

Shimano Dura Ace CS-7401 8-Speed HG Cassette: 12-21t (Near Mint)

Top of the line 8 speed cassette from the DA 7400 group.  This was first of the hyperglide cassettes. Includes lockring. Condition Near mint lightly used shape, minimal wear visible Details 8...

Shimano Dura Ace RD-7401 Rear Derailleur: 6/7/8 Speed

All of the 7400 series variants of derailleurs and shifters are compatible.  This will shift with 6sp SL-7400, 7sp SL-7401, and 8sp SL-7402 Dura Ace shifters.  It will work with non Dura...

Shimano 105 PD-1050 Aero Pedal Toe Clip Mounting Plate (Pair, Used)

These often lost plates are shims that secure the toe clips on Shimano 105 PD-1050 aero pedals. Condition Excellent lightly used shape. One bolt hole is very slightly out of round, which shouldn't...

NOS Shimano 105 PD-1050 Aero Pedal Toe Clip Shims (Pair)

These often lost plates are shims that secure the toe clips on Shimano 105 PD-1050 aero pedals. Condition New old stock, slightest shop wear. Details Sold in pairs

NOS Shimano Aero Pedal Mounting Front Plates: Alt Version - 600 & Dura Ace AX/EX/7400/6400 (Pair)

These often lost plates secure the toe clips of Shimano aero pedals from the 1980's and facilitate using a Look-style cleat for better pedal retention. The cleat's tip slides under the shoulders on...

NOS Shimano Aero Pedal Front Mounting Plates: Non-Adjustable - 600 & Dura Ace AX/EX/7400/6400 (Pair)

These often lost plates secure the toe clips of Shimano aero pedals from the 1980's and facilitate using a Look-style cleat for better pedal retention. The cleat's tip slides under the shoulders on...

NOS Shimano Aero Pedal Front Mounting Plates: Adjustable - 600 & Dura Ace AX/EX/7400/6400 (Pair)

These often lost plates secure the toe clips of Shimano aero pedals from the 1980's and facilitate using a Look-style cleat for better pedal retention. The cleat's tip slides under the shoulders on...

Dura Ace AX PD-7300 Dyna Drive DD Pedals: Large Toe Clips (Smooth)

Set of infamous Dura Ace Dyna Drive pedals complete with size large toe clips and mounting hardware.  This is the later 7300 AX version.  The main difference between these and the earlier...

NOS Shimano Dura Ace AX BR-7300 Brake Pads: Original (Two Pair / Set of 4)

Very difficult to source set of original Dura Ace AX brake pads / blocks. Condition New old stock, no package. Supple Details Set of 4 pad inserts

Shimano Dura Ace AX BR-7300 Brakeset: Complete (Near MINT+ )

Bizarre and cool brakeset from the 1980's DA aero group.  Mechanically these are similar the Campagnolo Delta brakes, and also borrowing from Cunningham / Suntour roller cam brake technology...

NIB/NOS Dura Ace SS-7600 NJS Track Cog / Sprocket: 15t x 3/32" - Black

The DA track cog is the premier cog choice for Japanese pista bikes (and most others excluding Campagnolo built bicycles).  Gorgeous flat black anodizing.  Great for fixed gear urban...

Shimano 600 / Ultegra PD-6402 Clipless Pedals: Grey (Barely Used Near Mint+++)

Rare set of the first 600/Ultegra clipless pedals, from the 1980's 6400 Tri Color group. Condition Very close to NOS shape! These show very minimal use and are fully show bike worthy. Bearings and...

Shimano 600 ax HS-6300 Quill Stem: 80mm x 26.0mm - Top Cap - Hidden Bolt (EXC+, Missing Plate)

The Shimano 600ax stem is the same stem as the Dura Ace ax HS-7300, just with different logo on the clamp and a plastic vs metal top cap.  Condition Overall excellent to near mint with minimal...

Shimano 600/Ultegra HP-6400 1" Threaded Headset: Silver (EXC+ Used)

This is a versitile headset!  It looks "classic" enough to go on a vintage bike, yet modern and shiny enough to go on a 90's bike.  It also has modern performance features such as ultra...

Shimano Dura Ace RD-7400 Rear Derailleur: 6/7/8 Speed (Fresh Pulleys)

All of the 7400 series variants of derailleurs and shifters are compatible.  This will shift with 6sp SL-7400, 7sp SL-7401, and 8sp SL-7402 Dura Ace shifters.  It will work with non Dura...

Shimano Dura Ace RD-7402 Rear Derailleur: 6/7/8 Speed (Barely Used NEAR MINT+++)

The last iteration of the 7400 series derailleur, the RD-7402 was issued with the 8 speed groupset.  As for compatibility, All of the 7400 series variants of derailleurs and shifters are...

Shimano Dura Ace HP-7410 Threaded Headset: 1" (Near Mint)

Lovely headset from the tail end of the 8 speed 7400 series, into the 9 speed 7700 series.  High performance sealed cartridge bearings with classic styling overall but logos closer to the 7700...

Shimano Dura Ace ST-7400 STI Shifters: 2x8 (Near Mint Clean Hoods)

Highly sought after 8 speed STI!  These shift as good as new.  Super positive shifts, absolutely zero hesitation.  It's rare to find them shifting this well.  This is only for use...

NIB/NOS Dura Ace PD-7400 Aero Pedals: Medium Toe Clips - Cleats - Spanner Wrech

Totally untouched example of the much loved Dura Ace aero 7400 pedals from the 1980's. These come with the original hard to find toe clips in size large. These were produced from 1984 to 1993, and...

NIB/NOS Shimano Dura Ace 7400 Brakeset Brake Levers: Original Hoods - BL-7400 Levers + BR-7400 Calipers + Cables/Housing

Nearly impossible to find fresh unused set of DA 7400 brake calipers and levers circa 1980's! Original hoods, pads, & cables/housing in fantastic condition! Condition New old stock in retail box...

NIB/NOS(*) Shimano Dura Ace FC-7400 Crankset + Bottom Bracket: 170mm 52/40t (Shop Wear, Installed once)

The 7400 crank is a favorite for 1980's high end road bikes with Japanese components.  These were made from 1984-1988. It is nearly identical to the later FC-7402, who's only difference is...

Shimano Altus SL-M310 Rapidfire Plus Trigger Shifter: LEFT / FRONT (NEW)

Affordable replacement front shifter for most any 5 speed, 6 speed, 7 speed, 8 speed, 9 speed, and some 10 speed front derailleurs. Condition New in box