Bontrager Select Seatpost: 31.6mm - Zero Setback - Late 1990's / 2000's - Two Bolt (EXC+)

Hard to find post that was stock equipment on mid to high level road/mountain bikes circa late 1990's to early 2000's.  Specifically Trek branded bikes, but it was available aftermarket/OEM and came stock on other brands too.  Zero setback, two...

NOS Ritchey Logic Comp 1 1/8" Threaded Headset: Black - 1990's (No Crown Race)

Somewhat tough to find headset from Ritchey's lineup in the early to mid 1990's.  This was just below the WCS headset, and above the Logic headset.  It would have been found stock on Ritchey P-22 and P-23 models among others...

WTB Laser V Titanium Saddle: Black Leather w/ Red Stitching - 1st Gen

1st generation of one of WTB's historically most popular saddles, in titanium rail format!  This early version features stitching that runs from the tip of the nose all the way to the rear where it meets the shell, on each side.  This gives it...

Lyotard REF 45 CA-N Quill Pedals: 9/16" - Black Alloy Cages (Near Mint)

Rare black anodized version of the Lyotard 45CA pedals in English thread!  These are from the late 1970's into early 1980's. Condition Near mint lightly used condition with relatively low miles. Buttery smooth perfect bearings.  Just about...

Mavic 305 SSC/Zap Headset: 1" Threaded - Silver/Black - Italian (EXC)

Rare and sought after Mavic headset from the SSC & Zap groupsets, produced 1989-1999.  This the road oriented version, whereas the 315 and 316 were marketed for mountain bikes (of course it works for both road and mtb).  It features a...

Suntour Cyclone LD-1600 Clamp Band Downtube Shifters: 1st Gen 1970's 1980's

These are 1st generation Cyclone shifters with a band clamp-on design.  Lovely polished and milled lever blades, knurled edge caps. Condition  Very good shape, some light wear Details Friction For use with any speed drivetrain (5, 6, 7,...

Jack Taylor Cycles Water Bottles: White (Pair, One NOS, One Near Mint)

Pair of water bottles to go with your Jack Taylor bicycle! Condition One appears new old stock, the other has a bit of scuffing from a cage and light wear. Details Pair (two bottles)  

FREAK UNTHREADED Campagnolo #743 Track Lockring: Collector's Item - Steel - <C> (NOS)

Talk about a weird rarity! This appears to be a Campy error part, a track lockring the factory forgot to thread!  Perhaps it was an error, or perhaps it was a lockring "blank" and it just never made it to the threading station in the workshop. ...

NOS Reynolds Ouzo Pro Carbon Road Fork: 1" Carbon Steerer - 43mm Rake (Take-Off)

Harder to find 1" carbon on carbon fork!  This is the late 1990's to mid 2000's era version. This is known as a stiff and reliable fork with great vibration dampening functions.  Great for your high end race or endurance road bike. ...

Manitou Long 5mm Wrench: M1 / M2 / M3 / EFC - For Bolt inside Legs (RARE)

This is the original super long 5mm allen wrench that came with the 1990's Manitou elastomer forks.  It inserts inside the fork legs and unscrews the bolt that the elastomers float on.   Condition Lightly used, not rounded

Manitou Two (M2) Fork: 1" Threaded - Fresh Rebuild? (Near Mint)

Released in 1993, the Manitou 2 was the first of the Answer-Manitou forks to gain this colorful and playful graphics, a stark diversion from the grey and black monochrome of the M1 and earlier Bradbury forks.   Condition Near mint cosmetics,...

NOS Syncros Composite Carbon Fiber Seatpost: 27.2mm - Vintage 1990's - 159g (Take-Off)

Rare carbon version of the Syncros Pro Hardcore post, circa mid to late 1990's. Condition New old stock, though it was installed on a show bike for a short period. No signs of use.  There is a ring line where the post was clamped a few inches from...

Bottecchia Brass Head Badge: 1940's to 1950's - Eagle - Raised Features (Near Mint)

This unique antique head badge is a piece of early Bottecchia bicycle history. It is the storied company's most intricate headtube badge as well.  It is of brass construction, with raised lettering and detailed/raised eagle features.  Most of...

Campagnolo Nuovo Record Brakeset: #2040 - Standard Reach - Nutted (Near Mint+ LOW MILES)

Standard reach and nutted Nuovo Record sidepull road brakes from the post CPSC era, 1978 to 1984+.  Domed qr levers, original adjusters.   Condition Near mint+ barely used, as clean as many "NOS take off" brakesets.  The one...

NIB/NOS Campagnolo Brake Cable & Ferrule Set: #2029 / 2028 Front/Rear - Super Record / C-Record - Vintage 1980's

These inner wires were stock equipment for your later Super Record and C-Record brakes, identified via simple Campy "C" on the side indicating ~1984-1987 make, but otherwise the cables are the same as the earlier Nuovo Record/ Gran Sport <C>...

NOS SRP Titanium Shimano V-Brake Upgrade Kit: Deore/XT/XTR - Mounting Bolts/pad bolts/nuts/cable pinch/Spring Tension (Sold in Sets for One Brake)

Sleek ultralight upgrade kit for your Shimano Parallel Pull v-brakes. These were designed with the high end XTR BR-M950 / BR-M952, but will work with most other Shimano V-brakes and likely other brands.  To name a few, XT BR-M750, XT BR-M760,...

1963 Schwinn Stingray Knobby Tire: 20" x 2.125 Tire: S2 - Goodyear - Made in USA - Blackwall (NEAR MINT)

This Stingray Westwind Knobby tire made by Goodrich dates to the last quarter of 1963, making this among the very first Stingray tires ever made!  These were used on the Stingray through 1964. If you are restoring an early Stingray, you know how...

NOS Avocet Racing 1 (R1) Saddle: Softer Leather (Buffalo?) Black w/ White Decals - 1980's 1990's

This saddle has a softer/smoother feeling leather than was usually found on the Racing models.  Still smooth leather and not suede, but very soft.  Is it buffalo leather? Buffalo leather was the premium leather Avocet offered on the Racing II...

NOS Universal 51 Brakeset + Levers: 1960's Short/Long Reach - Supple Gum Hoods

These Italian brakes were popular stock models on racing bikes from the 1950's through the 1960's and into the early 1970's.  It features a long reach brake for the rear and a front reach on the front, which was a common setup on earlier Italian...

NOS Mavic 500 Series Quick Release Skewer Set: 1980's Vintage - Chrome

These skewers are from the 1970's, 1980's and early 1990s Mavic 500 series which includes, 501, 502, 510. All have steel cams/ends.  The Mavic 550, Mavic 550 RD, and 87 hubs are the same but feature silver anodized alloy cam bodies and end...

NIB/NOS Campagnolo Athena RS 7s Cassette Hubset & QR: 126mm - 32H - Rare

Rare 7 speed cassette hub from the Athena group!  This was issued in about 1991-1992 before 8 speed came out.  Freehub body is 7 speed pre-exa drive, with 8 equal width splines.  This will work with both pre-EXA 8s cassettes and current 8...

Campagnolo Grasso 10-N 500g Grease Tub: 3/4+ Full - 1980's C-Record Era - RARE!

This is arare 500 gram white jar of Campagnolo Grasso-10-N grease from the mid to late 1980's "C-Record era".  Even back in the day, this would have been so cost prohibitive that only pro bike shops that do a large quantity of Campy builds would...

1979 Mongoose Motomag BMX Survivor: 100% Original! Unrestored Show Bike - Winner's Circle - Quilted Saddle (EXC)

*Sale fell through, it's available again!* This unrestored and original Motomag is 100% stock to catalog spec! It has all four of its original reflectors in excellent condition, and even the chainguard! Paint and decals are original, backed up by the...

Aero Top Mount Downtube Shifter Mount Adapter For Colnago Master Krono TT, etc

This lil gizmo bolts to a special braze on that came on some top level 1980's aero and time trial bikes, and allows you to mount standard downtube shifters to it.  This one is from a Colnago Master Krono, which had a little divot on it's braze on...

Antique De Marchi Madison Track Shorts: Sz 4 - Wool - Quilted Rear - Jamming Tool - 1940's 1950's 1960's - Deerskin Chamois (Mint)

These are a preserved slice of track racing history!  These are called Madison shorts or 6-day shorts. They have a thick pad protruding from the left hip that was a "jamming tool" that your riding partner would grab to sling you forward to ride...

Bayliss Wiley Bottom Bracket Cups + T.D.C. No4 Cottered Spindle: 130.5mm - 1940's 1950's (Near Mint+)

This British made cottered BB from Bayliss Wiley was a popular model on quality bicycles from the 1930's to the 1950's.  It's cups are machine faced, with lots of detail/texture.  The spindle is a T.D.C. (Thomas D Cross) model 4 in 130.5mm, for...

Milremo Special Course / Stronglight / Stronglight 45 Cottered Crankset: 170mm x 49/46t TA - 5 Pin 50.4mm Cyclotouriste - Chrome (Near Mint)

This crank was a Stronglight 45 5-pin, imported to Britain by Ron Kitching in the 1960's and rebranded as his house label Milremo.  The model is either Special Course 55 or the lighter Course 50.  This one is equipped with TA chainrings in a...

Cyclo Benelux Mark 7 Cable Operated Front Derailleur: Type Two (Near Mint)

This is the 2nd version of the cable lever operated MK-7 front derailleur that ran from 1957-1969.  It's cage has the oval logo just like the rod operated derailleurs of the 40's and 50's, where the 1st type had BENELUX spelled out across it. ...

Cyclo Benelux Super 60 Shifters: Front/Rear - Clamp On - 1960's (Near Mint_

Gorgeous clamp on shifter from Cyclo/Benelux.  Features a gem-like red/white/blue side cap, and alloy plates.  This is one version of the shifters that came with the Super 60 and Sport P2 rear derailleurs throughout the 1960's Condition Near...

Cyclo Benelux Super 60 Rear Derailleur: 1st Type (Near Mint+ Low Miles)

Introduced in 1960, the Super 60 was Cyclo-Benelux's attempt at competing with Campagnolo and it's Gran Sport + Record drivetrains.  It was the companies first dual parallelogram derailleur, and was designed to be a top level racing model.  The...

Shimano Deore AX Touring Crankset: FC-DE30 / DE20 - 170mm x 50t - One Key Release

Before Deore was a mountain bike group, Shimano released it as its first touring specific group!  It has strong French influences (note the TA style spider), and features the Dyna Drive 24tpi pedal holes that Dura Ace AX and 600AX have.  These...

Shimano Dura Ace EX / AX Toe Straps: Blue Nylon (Near Mint)

These straps came with the Dura Ace EX PD-7200, Dura Ace AX PD-7300, Dura Ace PD-7400, and 600 EX / PD-6400. Condition Near mint very lightly used shape. No real wear, but some grease stains (likely from shop wear more than riding) Details Pair

Dura Ace EX PD-7200 + AX PD-7300 Dyna Drive Pedal LOT: 5 Pairs - Large Clips/Straps

Bulk lot consisting of five pairs of Dura Ace Dyna Drive pedals, complete with large/medium toe clips + cleats. Most of these are rideable, with the only issue being a few loose/tight bearings (can be adjusted). DD pedals feature oversized pedal...

Dura Ace AX PD-7300 Dyna Drive Pedals: Large Clips/Straps (Mint 50 Miles)

Complete and barely used example of the infamous Dura Ace Dyna Drive pedals complete with size large toe clips and mounting hardware.  This is the later 7300 AX version.  The main difference between these and the earlier pd-7200 EX version is...

Shimano 600 / Dura Ace Aero Toe Clips: XL - 7200/7300/7400/6400/A550 - 3 Bolt (Near Mint+)

These toe clips fit all the aero Shimano pedals including Dura Ace, 600, and 105 aero toe clips that require a three bolt clip. Condition Near mint or better lightly used shape. There's a scrape on an edge of one pedal loop tip, and microscratching...

NIB/NOS Shimano 600 / Dura Ace AX PD-7300 DD Pedal Rebuild Kit: Cones/Housing/Dust Covers/Seals (For Right and Left Pedals)

Completely unobtanium spare parts kit for the Shimano AX 600 PD-6300 and Dura Ace PD-7300 DynaDrive pedals. This kit includes the blue dust caps that go on the end of the threads, cones for both the 600 and DA (they're two different lengths), housings...

Dura Ace Headset Wrench SET: For Lobed Top Cup/Nut on Dura Ace AX HS-7200 / 600EX HS-6200 / 600 EX HS-6207

Hard to find wrench for the lobed top nut on vintage aero groupsets, Dura Ace AX and 600 EX headsets. Condition Lightly used, in original case/package.  No wear, just a bit of grease stains Details Fits HS-7200, HS-6200, HS-6207 Includes TWO...

NIB/NOS Shimano Dura Ace EX HP-7200 Headset: FRENCH Thread

Super rare French threaded Dura Ace EX headset from 1978 - 1984.   Condition New old stock in retail box, pristine.  Details 1" Threaded French 25x1mm

Campagnolo Track Cog: 12T x 1/8" - Steel (EXC)

Tough to find 12 tooth campy track cog! Condition Excellent used shape Details 12t x 1/8"

NOS Campagnolo Alloy Track Cog: 16T x 3/32" - Record SL #763/A

The Record Super Light alloy track cog (model 763/A) was made specially for the weight weenies, who must have the lightest of light.  Absurdly featherweight, at 17 grams!  Gorgeous deep bronze finish, as standard for Campy's British threaded...

NIB/NOS Scott Mathauser Brake Pad Inserts: Size "W" Suntour / Weinmann / Universal / DIA-COMPE - Salmon (two pairs)

Set of four brake shoes, in size "W" to fit Weinmann, Universal, Dia-Compe, Gran Compe, or SunTour calipers Condition New old stock in original package. Details Two pairs (4 pads, enough for two wheels) Salmon 

NOS Campagnolo Super Record 1984-1987 Brake Pads: Black (set of 4)

These are the pads that came on late generation Super Record brakes!  They're the same form as the grey or tan Victory / Triomphe pads from the same era, but in black.  Quite hard to find. Condition New old stock, pristine, not dry...

CUSTOM Selle Italia Flite Titanium: 155mm Extra Wide! Textured Leather - 2002 (MINT)

This weird one of one Flite was custom made by Selle Italia for one of their wealthy customers. Who knows how much they would charge to make a personal model for someone?! It has a width of 155mm, naturally textured premium black leather, and titanium...

NOS Ritchey Megabite Overdrive Gumwall Tires: 26 x 2.0" - Vintage 1990's - Kevlar Folding - (PAIR)

These legendary 1990-1995 MTB tires were Ritchey's early directional tires.  It features small closely spaced knobs for that ultrafast XC race feel, on dry hardpack. The Z-Max was the all-around fast XC tire for both dry and wet conditions, these...

NOS Mavic 221 Rims: 26" MTB - 1990's-2000's - Silver (Pair)

These rims were stock on countless mid range mountain bikes and touring bikes in the mid 1990's to early 2000's. They were later called the X221, as X stood for cross country and D stood for downhill. Condition New old stock, no wrappers.  Barely...

NOS Mavic M 231 CD Profil PSP Rim: 26" x 32H - Paris Gao Dakar - Hard Anodized Grey (Single)

These are the ultralight, ultra-narrow XC race rims of the early 1990's! If you were building a super mtb to win the world cup circa 1990 to 1995, these were often your choice.  They were part of the Paris Gao Dakar group that all the Mavic-equipped...

NOS Mavic M 231 CD Profil PSP Rim: 26" x 28H - Paris Gao Dakar - Hard Anodized Grey (Single)

These are the ultralight, ultra-narrow XC race rims of the early 1990's! If you were building a super mtb to win the world cup circa 1990 to 1995, these were often your choice.  They were part of the Paris Gao Dakar group that all the Mavic-equipped...

NOS Mavic M 231 Profil PSP Rim: 26" x 32H - Paris Gao Dakar - Silver (Single)

These are the ultralight, ultra-narrow XC race rims of the early 1990's! If you were building a super mtb to win the world cup circa 1990 to 1995, these were often your choice.  They were part of the Paris Gao Dakar group that all the Mavic-equipped...