RARE

Thomson X2 Road Stem: 1 1/8" x 100mm x 31.8mm - 10D - Black (NEW)

Discontinued X2 stem from Thomson, a lighter version of the X4 intended for road use. Condition New in package, very slight shop wear Details Bar clamp size: 31.8mm Steerer clamp: 1 1/8" Stem Length: 100mm Rise: 10 degree Clamp: 4 bolt Type:...

NIB/NOS (Unica) Nitor Mod. 63 Seatpost: 27.2mm - Red Synthetic Friction Plates - 1960's / 1970's

The Nitor - Unica model 63 seatpost was released in 1963 and ran into the 70's.  It was a very expensive upgrade to the Campagnolo Nuovo Record 2-pin seatpost that was the gold standard of that era. These were only ever marked Nitor, which was...

NIB/NOS Weyless Hubset w/ QR Skewers: 36H - 1970's - Mirror Polish

Though these look like a product of the 1990's CNC era, these were actually made from 1974 to 1978 in the USA.  Great choice for Exxon Graftek, Teledyne Titan, Bruce Gordon, and other top shelf boutiquey USA made bikes of the era. They were designed...

NIB/NOS Suntour Superbe Pro Brakeset: CB-3600 - Short Reach - Nutted (Front & Rear)

These brakes were used for both the Superbe and Superbe Pro groups from about 1979 to 1986 with minimal changes. This is a later version indicated by the cone-shaped center nut where the earlier ones had acorn nuts. Made by DIA COMPE for Suntour, these...

NIB/NOS Suntour Superbe Pro Crankset: CW-SB10 - 172.5mm x 53/42t x 130mm - Dust Caps (Pristine)

This is an early version of the last gen Superbe Pro cranks that ran 1987-1994.  Until 1991, the arms had the SUNTOUR SUPERBE PRO logo in bold etching on the center flat of the arms.  Starting in 91, the logos moved to one of the side slants,...

NIB/NOS Shimano Dura Ace EX BL-7200 Brake Levers & Gum Hoods: Drilled - Vintage 1970s 1980s

Rare untouched set of EX levers with original tan gum hoods! The Dura Ace EX group ran concurrently with the wild aero 7300 Dura Ace AX series, circa ~1978 to 1984.  Condition New old stock in sealed retail package. Hoods feel great and show no...

NIB/NOS Shimano Dura Ace EX RD-7200 Rear Derailleur: Silver - Short Cage - Vintage 1970s 1980s

The Dura Ace EX group ran concurrently with the wild aero 7300 Dura Ace AX series, circa ~1978 to 1984. These were the last truly classically styled Dura Ace derailleurs before the somewhat modern 7400 took over. Includes EX decal and allen...

Cinelli 1R OLD LOGO Quill Stem: FRENCH 22.0mm x120mm x 26.4mm - Ti Bolt - 1970's Early Version

Rare early version of Cinelli's top of the line quill, made even more scarce by being 22.0mm quill for French bikes.  French Cinelli stems are super easy to identify via a dimple above the top of the expander cone relief slots. It's also marked on...

NIB/NOS Cinelli 1R OLD LOGO Quill Stem: FRENCH 22.0mm x120mm x 26.4mm - Ti Bolt - 1970's Early Version

Rare early version of Cinelli's top of the line quill, made even more scarce by being 22.0mm quill for French bikes.  French Cinelli stems are super easy to identify via a dimple above the top of the expander cone relief slots. It's also marked on...

NIB/NOS ICS Campagnolo Super Record Ti 1052/SR Front Derailleur: Chain Guide - Braze On - RARE!

This is an exceptionally rare 1985 Campy Super Record front derailleur that has been modified/improved by ICS (Ital Cicli Systems) to include a chain guide to prevent the chain from dropping off the inside of either big or small chainring.  This...

NIB/NOS Campagnolo Nuovo Record Brakeset + Levers: #2040/1 - Nutted - Standard Reach - Original Gum Hoods

Fresh NR/SR brakes have gotten really tough to source!  This set is post-1978 with domed QR levers, and has original gum hoods in supple mint shape. Condition New old stock in original tan box! They are very close to pristine, and perfectly clean...

3ttt Team Aero Drop Handlebars: Flat Tops - 44cm x 26.0mm - 1970s/1980s (Near Mint+)

Obscure high end drop bars from the late 1970's to mid 1980's in the height of the aero era ruled by Dura Ace EX/AX.  The tops of the bars are slightly flattened, continuing onto the ramps slightly.  It's done just enough to aid comfort, but...

1920's Schrader Balloon Tire Gauge: Antique Bicycle & Automobile Historical Memorabilia

The Schrader valve (aka automotive valve) was invented in 1891 and patented in 1893 by August Schrader, and it became the predominant pneumatic tire valve for both bicycles and cars for nearly a century. This pressure gauge would have been found in the...

Bicycle Trouser Cuff Band: Italian Circa 1940's / 1950's - Steel

Rare mid century cuff to keep your pants out of your chain while riding. It appears in the 1950 Emille Bozzi cycling catalog (see images), and was likely made in the 1940's to 1950's. They became flimsy aluminum sometime in the 70's and shortly after...

NOS Bicycle Trouser Cuff Band: Italian Circa 1940's / 1950's - Steel

Rare mid century cuff to keep your pants out of your chain while riding. It appears in the 1950 Emille Bozzi cycling catalog (see images), and was likely made in the 1940's to 1950's. They became flimsy aluminum sometime in the 70's and shortly after...

Antique Bicycle Chainstay Bumper Protector Set: Pre War? Clamp On - Rubber & Steel

These rare pieces of bicycle history clamp towards the top of each chainstay and protect them when the bike is leaned against a wall or even laid down in a crash. They resemble a taillight from a 1950's or earlier automobile. I suspect these were used...

A. Duprat Maxiplume Crank Arm: Driveside - 50.4mm - 170mm - Cottered - French 1930's 1940's 1950's - Chrome

Extremely rare orphaned drive side crank arm from Andre Duprat, circa pre-war and into the 1950's. Duprat is perhaps most known for their nickel plated hollow steel cranks that were nearly as light as alloy cranks of the era and vastly stronger...

NOS British Lamp Bracket Mount: Steel

Basic raw steel light mount for. This is an antique-style lamp mounting bracket, for lanterns that mount on a bicycle's fork.  These were common on British bikes from the 1930's, 40's, and 50's as well as some French Randonneur bikes...

Heart Cutout British Lamp Bracket Mount: Chrome

Beautiful lamp bracket with a heart cutout, though the manufacture is unknown. This is an antique lamp mounting bracket, for lanterns that mount on a bicycle's fork.  These were common on British bikes from the 1930's, 40's, and 50's as well as some...

NOS British Lamp Bracket Mount: Satin-like Chrome

Beautifully finished lamp bracket, though the manufacture is unknown. The chrome is a "softer" appearance than your typical bright chrome. This is an antique lamp mounting bracket, for lanterns that mount on a bicycle's fork.  These were common on...

Constrictor Conloy Lamp Bracket Mount: Alloy - 1930's 1940's 1950's

This gorgeous lamp mount featuring their snake logo is among the most sought after lamp mount to come out of the British cycling scene. This is an antique lamp mounting bracket, for lanterns that mount on a bicycle's fork.  These were common on...

Reynolds Aluminum Lamp Bracket Mount: Chrome - 1930's 1940's 1950's

Very rare and lightweight alloy lamp bracket from Reynolds. This is an antique lamp mounting bracket, for lanterns that mount on a bicycle's fork.  These were common on British bikes from the 1930's, 40's, and 50's as well as some French Randonneur...

Chater Lea Lamp Bracket Mount: Chrome - 1930's 1940's 1950's (Near Mint)

Very rare and sought after lamp bracket from Chater Lea. This is an antique lamp mounting bracket, for lanterns that mount on a bicycle's fork.  These were common on British bikes from the 1930's, 40's, and 50's as well as some French Randonneur...

NOS Shimano XT M780 Left / Front Shifter Base Cap

Replacement oem basecap for your front SL-M780 Condition New old stock Details Front 

NIB/NOS Shimano XT SL-M740 Gear Indicator: Front/Left - Screws

Did your XT M740 8 speed shifter have a busted or ugly gear indicator window?  This is a rare offering of a new replacement indicator plate with screws!  This was the best of the XT 8 speed shifters, and is worth restoring.  The M740 was...

NIB/NOS Shimano XT ST-M739 Gear Indicator: Left/Rear - Screws

Impossible to source replacement gear indicator w/ screws for both SL-m739 shifter pods and ST-M739 combos. Condition New old stock in sealed OEM package.  Details Front / Left only

Avid Tri Align Cantilever Brake Arms: Matched Front & Rear Set - Black

These brakes came in a long arm version (3 3/8") and short arm (3").  This set has one of each.  People often put long brake arms on the front for extra power, and a short on the rear.  The arms come with pad retainers/bolts and bushings,...

Avid SD Ultimate Brake Lever: RIGHT Only - Black Anodized - Vintage 1990's (EXC)

Avid's top of the line brake levers!  These tend to have a bit better modulation than the ultra lightweight 90's CNC levers like the Kooka and Paul levers.  Plus, they look amazing!  This is only the right side lever Condition Excellent...

Control Tech Stix Stumpy Bar Ends: Short Stubby Version - Vintage 1990's - Black (Near Mint+)

Rare short and stubby version of Control Tech's 1990's bar ends, officially named the Control Stix Stumpy. Condition Near mint or better with very few miles. Only a few very minor marks. Details Black

Shimano Deore XT II SL-M732 REAR Thumb Shifter: 7 Speed SIS / Friction (Near Mint+ Low Miles)

Clean XT thumbie! These last generation XT shifters ran from 1989 to 1992, and Shimano went Rapidfire shifter only in catalogs in 1993. These were likely issued for a year or two after 1992 for bikes that desired thumbies.   Condition Near...

Shimano XTR BB-M952 Bottom Bracket: Octalink V1 - 112.5mm (Near Mint)

XTR M952 bottom bracket's do not stick around on this site long, grab it before it disappears!  This is designed for use with M952 cranks, and provides a 47.5mm or 50mm chainring depending on spacers (two spacers included) used.  If you have an...

Campagnolo Nuovo/Super Record Porta-Catena Shifter Set: #1013/6 (Near Mint+ Low Miles)

This is a rare 1970's and early 1980's shifters from the Campagnolo Nuovo Record Porta-catena 1013/6 downtube shifter system.  It's largely a standard friction shifter, but the lever has a flip lever which shifts the derailleur onto the chain holder...

Campagnolo #1014 Nuovo Record Downtube Shifters: Clamp On - Black Cable Stops - Flat Plates/Screws (Near Mint)

Super clean clamp version of the NR/SR DT shifters of the 60's, 70's, and 80's.  These have the flat cover plates (part #603) and flat head screws, which were used up until the late 1970's. Condition Near mint lightly used shape. Only very minor...

Tange TG-235 Threaded 1" Headset: 1980's Mid School BMX - Chrome Steel - ISO 27mm (Near Mint++ Low Miles)

This unique headset was very popular in the midschool BMX world circa 1980's Condition Near mint or better lightly used shape. Barely a mark past flange dirt and the slightest wrench marks on the flats. It looks even better in person! Show...

EDCO Competition Hubset: 36H x 8/9sp Cassette - 135mm - Polished (Near Mint+ Perfect Bearings)

High quality Swiss-made rear mountain bike hubset from the 1990's.  They're ultra smooth, bombproof, quite rare. Condition Near mint or better with low miles. Perfect bearings.  There's slight spoke hole wear and a touch of dirt in deep...

NIB/NOS Shimano XTR CN-IG90 Chain: 7/8 Speed -116L - M900 + M950 + Dura Ace 7400

This chain was part of the 1st Generation XTR M900 group and later M950 group as well as the Dura Ace 7400 series, and was the top chain available in the early 1990's.  It was often an upgrade to M737 and M739 groups, or Dura Ace / 600 on the road...

NOS Campagnolo Montreal 76 Clincher Rims: PAIR - 700c x 36H - Late 1990's - Silver -1st Version - RARE

Quite rare set of Campy Montreal 76 rims. These were part of a 1996-1999 series of rims commemorating The Olympics & their cities. This set is the first version Montreal 76, from 1998 only. They are deep box section, with a satin finish and...

NOS Mavic G.L. 330 Tubular Rims: PAIR - 36H x 28" - Hard Ano Grey - Vintage 1970's 1980's

The GL330 was Mavic's all conditions racing / training tubular rim in the 1970's and 1980's.  They weigh 330 grams,  was situated between the amateur GP 4 at 395g and the ultralight race only GEL 280 at (you guessed it) 280g. Condition New...

Regina Oro 5 Speed Freewheel: 14-31t Wide Range MTB/Touring - Gold (Near Mint)

Great freewheel for your classic touring bicycle, early mountain bike or klunker, or your race bike that needs some more hill climbing gears!  The 14-31 wide range gearing is tough to find in the Oro.  The word "Oro" simply means "gold"...

VAR #13 Adjustable Pin Spanner for BB's & Headset: Brass Wingnut (EXC Straight Pins)

Nice adjustable pin spanner for bottom bracket adjustable cups/lockrings, headsets, dust caps, etc.  And it has the pins and original brass wingnut! Condition Excellent lightly used shape.  Both pins are straight, wingnut spins freely and...

VAR #02 3rd Hand Tool: Clamps Brake Caliper For Pad/Cable Adjustments (Near Mint+)

This may be the best third hand tool ever made!  It is an extra, or I would never sell it.  The arm's fork end and it's opposing side fit very well around most brake pads or caliper arms.  The action is super intuitive.  You hold it...

NIB/NOS Suntour Barcon Rubber Lever Covers: #1246 (Sold In Pairs)

Restore your classic retrofriction bar end shifters to their former glory with minty fresh lever blade covers! These are made for the Suntour 3090 shifters, as well as the Suntour shifters rebranded as Raleigh, Schwinn Approved, etc. They'll probably...

Brodie Brake Booster / Fork Arch: Rockshox Judy - 3DV Purple 1990's Ano - Cable Hanger (Near Mint)

Super rare 3D Violet brake booster from Paul Brodie's workshop, circa 1990's. This version is scarcely seen, while the Brodie magnesium cantilever booster with a more rounded shape and no cable stop is more common. Cheap way to add some OG 3DV bling to...

Shimano Dura Ace FA-100 5 Speed Freewheel: 13-21t - 1st Gen 1970's Early 1980's - Gold (Near Mint+ Barely Used)

Nice gold 5 speed multiple freewheel from the late 70's to early 1980's 1st generation Dura Ace groupset.  Great gearing for classic racing road bikes and touring bikes. Condition Near mint or better shape with very low miles.  Buttery smooth...

1970's Nitto Dynamic Ambrosio Quill Stem: 90mm x 25.4mm - 1st Nitto Stem! Fuji Finest (Near Mint, RARE)

This piece of cycling history is Nitto's first ever stem, circa Sometime in the 1960's to mid 1970's! Officially it's the Nitto Dynamic I, and is drastically different from the 1980's & later Dynamic II. It is a very close clone of the Ambrosio...

Machine Tech Zero Flex QL Right/Rear Brake Lever: Vintage 1990's Cantilever - Silver

These rad levers were made in the USA from ~1996 to 1997 (via MOMBAT Timeline).  They released with the Machine Tech Zero Flex Cantilever brakes, and were reviewed as some of the best performing mtb brake levers of the era.  They are much...

Ringle Zooka Threadless Stem Body: 1 1/8" x 135mm x 25.4mm (EXC, No Faceplate or Cam Bolt)

Rare anodized stem from the 1990's, in one of the most popular colors.  Finding these in turquoise is pretty tough!  Great for your Yeti restoration. This one is missing it's faceplate and it's cam bolt. It's just the body with no hardware. Mix...

Kooka Racha Brake Levers: Red Ano - 1990's Cantilever (EXC+)

Kooka Racha's are some of the most popular (and for good reason) cantilever brake levers from the 90's CNC era.  They look lovely and edgy at the same time plus add power/modulation to any brake you hook them up to.   Condition Excellent...