French Bike Parts

Sachs New Success Front Derailleur: 28.6mm Clamp (EXC)

High quality front derailleur, with a nice chrome finish and blue decals. This came out with an 8 speed group, but it will work well with 6, 7, 8, and 9 speed drivetrains. Condition Excellent used shape.  Slight decal wear, pinpoint beginnings of...

NOS Lejeune Service Courses Toe Straps: Dark Red Leather - 1960's 1970's

Extremely rare fresh set of original Lejeune toe straps! These will elevate your classic Lejeune to the next level of completeness. Buckles say C.T.S.I. Made in France. Condition New old stock, never installed. Very close to mint. No fading or leather...

TA Pro 5 Vis Cyclotouriste Crankset: Capped Pedal Holes Early Version - 170mm x 54/44T Double - French (Near Mint+ Low Miles)

Very clean early version that features the closed pedal holes, with the little "cap" with a hole in it over the back sides.  The very earliest versions had different flutes and little engraved logos near the dust caps, and these were after those...

Ideale 2003 Randonneur Deluxe Suede Leather Saddle: 1980's - Black - PEAU + MOUSSE

The 2003 is one of Ideale's later saddles, in the 1980's. It is often called a randonneuse saddle.  On it's side logo is PEAU + MOUSSE which translates directly from French to Skin + Foam, referring to the leather cover with foam padding...

Vélo Magazine 13 Issue Lot: 1980's / 1990's 2000's

Set of the popular French cycling magazine, Velo.  Most are from the 1980's and 1990's with two from the early 2000's. Condition Most excellent to near mint with some light cover wear.

1st Gen Campagnolo " No Record" Nuovo Record Strada High Flange REAR Hub: 36H x 126mm (EXC Perfect Bearings)

This is a first generation "Nuovo" Record rear hub! It was made from 1960 to 1963, and is just like the later and more common NR hubs, but lacks the word "RECORD" under the Campy "World" logo.  These are quite rare, and a must if you have an Italian...

NOS Huret Jockey Wheels: 10t - Black (Sold Individually, no cover plates)

Single jockey wheel with bushing, though no cover plates. Condition New old stock, mint Details 10 tooth

NOS Huret Rival Rear Derailleur Cage + 10t Jockey Wheels + Bolts

Complete derailleur cage system from the Huret Rival rear derailleur (and possibly other models) Condition New old stock, mint Details

Simplex Competition Chainring: 51t - 6-Bolt - 1940's 1950's - Chrome (EXC)

Competition chainring from the 1940's and 1950's. These were used on a wide variety of brands, usually 3 pin cottered cranks using Simplex's adapter plates. Condition Excellent used condition. Light cosmetic wear. Details 51 tooth 6 hole

Simplex Competition Chainring: 48t - 6-Bolt - 1940's 1950's - Chrome (EXC)

Competition chainring from the 1940's and 1950's. These were used on a wide variety of brands, usually 3 pin cottered cranks using Simplex's adapter plates. Condition Excellent used condition. Teeth have chrome wear (and on the back side one tooth is...

NOS Simplex Competition Chainring: 49t - 6-Bolt - 1940's 1950's - Chrome

Competition chainring from the 1940's and 1950's. These were used on a wide variety of brands, usually 3 pin cottered cranks using Simplex's adapter plates. Condition New old stock, minimal shop wear Details 49 tooth 6 hole

Early TA P205 Pro 5 Vis Track Chainring: 1/8" - 53t x 50.4mm - 1940's 1950's - Single Ring (EXC)

This is a very rare 1940's or 1950's Specialties T.A. pista chainring, as identified from the presence of TA's old logo.  One of the logos is a small chainring shape, the other is stamped "cegedur duralumin forge"; Cegedur being the manufacturer...

TA Pro 5 Vis Cyclotouriste Inner/Middle Chainring: 42t - REF 2082 (Near Mint Low Miles)

These are original 1960's, 1970's, and early 1980's first production rings for the T.A. Pro 5 Vis crankset.  They have a 6 bolt 80mm BCD, and also fit the Stronglight 49D, and Velo Orange Gran Cru cranks.  They work for either the inner or...

TA Pro 5 Vis Cyclotouriste Inner/Middle Chainring: 46t - REF 2082 (Near Mint Low Miles)

These are original 1960's, 1970's, and early 1980's first production rings for the T.A. Pro 5 Vis crankset.  They have a 6 bolt 80mm BCD, and also fit the Stronglight 49D, and Velo Orange Gran Cru cranks.  They work for either the inner or...

TA Pro 5 Vis Criterium Outer Chainring: 53t x 50.4mm - REF ch205 (EXC)

Criterium or "Course Legere" version of the Pro 5 Vis outer ring for high tooth count inner rings ideal for road racing and criteriums. These are original 1960's, 1970's, and early 1980's first production rings for the T.A. Pro 5 Vis crankset.  They...

TA Cyclotouriste Pro 5 Vis Outer Chainring: 52t x 50.4mm - REF cy205 (EXC)

These are original 1960's, 1970's, and early 1980's first production rings for the T.A. Pro 5 Vis crankset.  They have a 50.4mm BCD, and also fit the Stronglight 49D, and Velo Orange Gran Cru cranks. Condition Excellent used shape.  Quite...

Early TA Pro 5 Vis Ref 2175 Double Chainring Set: 175 Professional Adapter + 52t / 49t - 1940's 1950's (EXC)

This is a 1940's or 1950's Specialties T.A. road double chainring set, as identified from the presence of TA's old logo.  One of the logos is a small chainring shape, the other is stamped "cegedur duralumin forge"; Cegedur being the manufacturer...

TA Pro 3 Attaches Ref 2173 Double Chainring Set: 173 Professional Adapter + 52t / 45t (Near MINT Low Miles)

"Professional" adapter and chainring set for TA "Pro 3 Attaches" crank arm (or other 116mm 3 bolt crank) with a set of TA's 6 bolt "criterium" chainrings (Ref 204 & 206). Includes original chainring bolts Condition Near mint or better with...

NOS Stronglight 49D 6 Bolt Adapter Chainring: 49t x 116mm BCD (take off)

Six bolt chainring for Stronglight 49 cranks which are using an adapter. Quite rare.  Condition New old stock, take off. No visible tooth wear, slight shop wear Details 52t BCD: 116mm

Stronglight 49D Chainring Set w/ Hex Bolts: 52t / 40t - 50.2mm x 122mm

Double chainring set for Stronglight 49 / 49D chainrings, complete with original hex bolts.   Condition Great used shape. Details 52/40t

Stronglight 104 Ter / 105 Ter Chainring: 56t x 122mm BCD - Black Ano - Drillium (Near Mint)

"Ter" version which was black anodized with factory drillium. 122mm ring from the 105 crank with it's spider handed down from the Stronglight 57 and 63 as well as the Stronglight 104 which changed to a clone of the Campagnolo Nuovo Record essentially...

Stronglight 63 / 93 Inner Chainring: 49t x 122mm - 5 Bolt (Near Mint+ Barely Used or NOS Take Off?)

Replacement middle / inner ring from the legendary Stronglight 63 and later 93 cranks. This is an earlier ring, identified by the pointy teeth vs the later more rounded teeth. The rare Stronglight model 63 SC (Super Competition) was introduced in 1963...

Stronglight 63 / 93 Inner Chainring: 45t x 122mm - 5 Bolt (Near Mint+ Barely Used or NOS Take Off?)

Replacement middle / inner ring from the legendary Stronglight 63 and later 93 cranks. This is an earlier ring, identified by the pointy teeth vs the later more rounded teeth. The rare Stronglight model 63 SC (Super Competition) was introduced in 1963...

NIB/NOS Stronglight 104 / 105 Chainring: 42t x 122mm BCD

122mm ring from the 105 crank with it's spider handed down from the Stronglight 57 and 63 as well as the Stronglight 104 which changed to a clone of the Campagnolo Nuovo Record essentially.  Condition New old stock in package. Details BCD:...

NIB/NOS Stronglight 104 Bis / 105 Bis Chainring: 45t x 122mm BCD - Drillium

"Bis" factory drillium 122mm ring from the 105 crank with it's spider handed down from the Stronglight 57 and 63 as well as the Stronglight 104 which changed to a clone of the Campagnolo Nuovo Record essentially.  Condition New old stock in...

Stronglight 99 Bis Chainring: 52t x 86mm BCD - Drillium (NOS Take Off)

This chainring has a bolt circle diameter of 86mm, and came stock on Stronglight 99, Stronglight 100, and Stronglight 80 cranksets.  It fits some SR triples as well. The Stronglight 99 was the successor of the popular 49D crank. It has a smaller...

NOS Stronglight Tevano 68t x 144mm TT Chainring: Time Trial - Silver - Vintage 1980's

Massively huge French chainring from the 1980's likely. How many riders can push a 68 tooth? And why? It sure would be a great challenge though, throw it on a bike and see if your buddies can ride it! Or, throw it in your bike display to draw attention...

NOS Look Dynamic Memory Eyelet Tool for Delta Cleats

This tool is used for the screw in the fourth center hole in some LOOK delta cleats. Condition New Details Red

1980 Peugeot Bicycle Catalog / Brochure: CFX-10 / PY10CP Prestige / PFN10E / PXN10LE / PKN10E (MINT)

Rare brochure for high end Peugeot racing bikes! It is the first year for the top level professional CFX-10 Super Competition (sold as frameset only), and has specs for the rest of their line including PY10CP Prestige, PXN10E Super Competition, PKN10LE...

1979 Peugeot Bicycle Catalog / Brochure: PY10CP Prestige / PXN10LE / PKN10E (MINT)

Rare brochure for (mostly) high end Peugeot racing bikes! It focuses on the professional level PY10 Competition heavily, and has specs for the rest of their line including PX10 Super Competition, PKN10LE Competition and entry level UO10 Course. If you...

1996 Mavic Rim Catalog Lot: Full Size + Brochure & Wheel Building Guide (Mint & Average)

Full set of Mavic rim catalogs from 1996. The wheel building guide is particularly nice, which details all sorts of factors in selecting the right spokes and other rim measurements. Condition The smaller folding brochure is mint, the other two are in...

1976 Mavic Catalog / Brochure: RARE! Mavic's 1st ? (MINT)

This SCARCE folding leaflet style catalog may be Mavic's first ever catalog in the classic era! Velo-Pages attributes this one to 1976, and Disraeli Gears attributes another with a black and red rear of a bicycle over a white background to 1979 (though...

1985 Huret Catalog: Jubilee / New Success / DuoPar / Rival / etc (Mint in original folder)

Huret's 1985 catalog. This one came in a folder with loose pages, as shown. I suspect they made it for the trade shows and didn't make a traditional "book" type catalog that year. Condition Mint

Time Equipe Titan Magnesium Pedals: Vintage 1990's - Grey (Barely Used Near Mint+)

Top level racing clipless pedals from the 90's! These were ridden to Tour De France victory by several legends including Marco Pantani, Jan Ullrich, Migel Indurain, Pedro Delgado and Greg Lemond.  Condition Very very few miles ridden! The top...

Antique Seatpost Binder Bolt/Nut + Cable Hanger Stop: Steel

Very old cable hanger and binder bolt set, unknown origins.  Condition Average used shape with finish wear and light rust  

Bicycle Trouser Cuff Band: Italian Circa 1940's / 1950's - Steel

Rare mid century cuff to keep your pants out of your chain while riding. It appears in the 1950 Emille Bozzi cycling catalog (see images), and was likely made in the 1940's to 1950's. They became flimsy aluminum sometime in the 70's and shortly after...

NOS Bicycle Trouser Cuff Band: Italian Circa 1940's / 1950's - Steel

Rare mid century cuff to keep your pants out of your chain while riding. It appears in the 1950 Emille Bozzi cycling catalog (see images), and was likely made in the 1940's to 1950's. They became flimsy aluminum sometime in the 70's and shortly after...

A. Duprat Maxiplume Crank Arm: Driveside - 50.4mm - 170mm - Cottered - French 1930's 1940's 1950's - Chrome

Extremely rare orphaned drive side crank arm from Andre Duprat, circa pre-war and into the 1950's. Duprat is perhaps most known for their nickel plated hollow steel cranks that were nearly as light as alloy cranks of the era and vastly stronger...

40's / 50's Atom 3 Speed Freewheel: 16-22t - French Threaded 34.7 mm x 1 mm - Black/Silver (Near Mint)

Early 3 speed freewheel from Atom, with recessed removal notches below the adjusting ring. Great for your randonneuse and technical trials bikes! Likely pre-war, maybe late 1940's or early 1950's. Condition Near mint lightly used shape. The finish is...

40's / 50's Atom 3 Speed Freewheel: 16-22t - French Threaded 34.7 mm x 1 mm - Black/Gold (Near Mint)

Early 3 speed freewheel from Atom, with recessed removal notches below the adjusting ring. Great for your randonneuse and technical trials bikes! Likely pre-war, maybe late 1940's or early 1950's. Condition Near mint lightly used shape. The finish is...

J. Moyne 3 Speed Freewheel: 14-22t - 1930's/1940's/1950's - French Threaded 34.7 mm x 1 mm

Rare and high end freewheel out of St. Etienne, possibly pre-war though these were made into the 50's. These freewheels and the elusive company are little more than legend in the bicycle world, as few have heard of them and little actual details about...

1940's Cyclo 4 Speed Freewheel: 16-22t - French Threaded 34.7 mm x 1 mm (Perfect Bearings)

Pre-war or maybe late 40's into very early 1950's 3 speed French threaded freewheel from Cyclo. Pretty hard to find. This uses the earlier style notch remover with the notches flush with the adjusting ring  Great for your road racing or randonneur...

Atom 4 Speed Freewheel: 14-20t - Splined Remover - French Threaded 34.7 mm x 1 mm - Black/Gold

French Atom freewheel in 4 speed format, but with a splined remover. Condition Near mint lightly used shape. The finish is just barely wearing off the teeth suggesting quite low miles. Buttery smooth bearings. Show bike worthy Details  French...

Cyclo Gear Company Type B 4 Speed Freewheel: 15-23t - French Threaded 34.7 mm x 1 mm

French threaded freewheel from the English Cyclo Gear Company (later known as Cyclo Benelux), circa 1950's to 1960's.  Great for your road racing or randonneur bike! Condition Average used shape, smooth bearings Details  French Threaded...

Atom 5 Speed Freewheel: 14-21t - 1950s / 1960's - French Threaded 34.7 mm x 1 mm - Black/Gold

French Atom freewheel from sometime in the 1950's through the 1960's Condition Great used shape. Buttery smooth bearings.  Details  French Threaded 34.7 mm x 1 mm 5 speed 14-21t *Used freewheels are sold AS-IS with no returns due to...

Atom 5 Speed Freewheel: 14-22t - 1950s / 1960's - French Threaded 34.7 mm x 1 mm - Black/Gold

French Atom freewheel from sometime in the 1950's through the 1960's Condition Average used shape. Bearings are a bit tight and could use an adjustment/grease Details  French Threaded 34.7 mm x 1 mm 5 speed 14-22t *Used freewheels are...

Cyclo Competition 5 Speed Freewheel: 14-21t - French Threaded 34.7 mm x 1 mm - Black/Gold

French threaded freewheel from the French Cyclo, circa 1970's. This was the stock freewheel on many years of the Peugeot PX-10 & PY-10, and a great choice for other French road racing bicycles. other road racing bike! Attractive gold bevel on...

NOS Cyclo 5 Speed Freewheel: 13-19t - French Threaded 34.7 mm x 1 mm (1970's?)

French threaded freewheel from the French Cyclo, circa 1970's. Great for your Peugeot PX-10 or other road racing bike! Condition New old stock, no signs of mounting. Slight shop wear/dirt Details  French Threaded 34.7 mm x 1 mm 5...