DRIVETRAIN

Campagnolo #1014 Nuovo/Super Record Downtube Shifters: Clamp On - Black Cable Stops - Flat Plates/Screws (Mint, NOS Take Off?)

Super clean clamp version of the NR/SR DT shifters of the 60's, 70's, and 80's.  These have the flat cover plates (part #603) and flat head screws, which were used up until the late 1970's...

Huret Touriste Léger Rear Derailleur: 1940's - Alloy Plates (EXC)

This rare rear derailleur out of France circa wartime to post-war 1943 to 1950.  It was designed around the materials Huret could source during the war, thus the piano wire. The pulley cage slides...

NOS Simplex #1146 Wing Nut For Double Shifters: Steel Plated Bronze - 1940's 1950's

Wingnut screw for 1930's, 1940's, and 1950's braze on shifters. These were found most often on the higher end models such as JUY and Tour De France, lower end models often had simple flat head screws...

Simplex #843 Wing Nut Screw For Single Shifters: Steel Plated Bronze - 1940's 1950's

Wingnut screw for 1930's, 1940's, and 1950's braze on shifters. These were found most often on the higher end models such as JUY and Tour De France, lower end models often had simple flat head screws...

Simplex Route Leger Monobloc Bell Crank Rear Derailleur + Shifter: 3V - 3/32" - 1930's 1940's French (EXC)

This derailleur was fairly similar to the Le Cyclo & Cyclo standard rear derailleurs, consisting largely of a cage with two pulleys, a bell crank, and a chainstay clamp. According to Velobase this...

NOS Le Lewis Rear Derailleur: Alloy - Chainstay Clamp - Two Large Pulleys - 1930's-1940's - Shifter - French - RARE

The Lewis rear derailleur was made in France circa 1934 into the late 1940's. The derailleur is primarily aluminum construction, particularly curious if it was available during the war! It's a pretty...

KMC Missing Link CL555 11-Speed: Shimano/SRAM/Campagnolo - Silver (Sold in Pairs)

Perfectly connects KMC, Shimano and Campagnolo 11 Speed Chains. Non-reuseable. Requires chain connector pliers Condition New Details

Campagnolo Gran Sport 1005/2 Front Derailleur: Matchbox Push Rod - 1950's - 1960's (NEAR MINT+ Show Worthy)

Exceptionally clean example of Campagnolo's top level front mech from 1954 (the first year the world logo appeared on this derailleur) to 1957 when the Record model was released.  The first gen was...

Polished Campagnolo Nuovo Record Front Derailleur: 28.6mm 1052/1 - 1970's (EXC+)

This polished NR FD seems to be a 1970's model, though it has the wide upper arm barrel that's usually not found in the 70's. Circlip, no cable stop/lip, pebbled clamp.  These are a bit less common...

Campagnolo C-Record A010 Rear Derailleur: 2nd Gen 1987-1989 (Near Mint)

Super rare new old stock example of the 2nd gen Campy C-Record rear derailleur circa ~1987 to 1989.  This second generation was in my opinion the most refined aesthetically out of the three...

Stronglight 49 Cyclotourist Crankset: 170mm - French - 1950's 1960's Early Model - Alloy Dust Caps

The model 49 / 49D crank was introduced in 1949 and ran until the 80's with only minor changes.  This very clean example is an early model from the late 1950's or 1960's. It's identified as such via...

Campagnolo Chorus 8/9 Speed Front Derailleur: 34.9mm - Pre 2000 (Near Mint)

This is a hard to source 8 speed into early 9 speed Chorus front derailleur that ran from about 1995 to 2000.  It has a flat outer plate without cutouts, and is the last version to not state 9/10...

NOS Specialized Flag Bottom Bracket Spindle: 124.5mm x 73mm - Triple - Square Taper - 1980's - 1990's

This BB spindle is a mid 1980's version to work with the Specialized Flag crank among others. Works with most cup and cone bottom bracket cups. Condition New old stock, no box. Some shop wear Det

NIB/NOS Specialized Bottom Bracket Spindle: 122.5mm x 73mm - MTB Triple - Square Taper - 1980's - 1990's - Bolts

This BB spindle is a late 1980's to early 1990's version. It is a 122.5mm length, for many triple mountain bike cranks such as Shimano XT M730/M735/M739 / Deore / LX / DX, Specialized Pro, etc. Works...

Suntour Superbe Pro FD-SB00-B Front Derailleur Braze On Body + Mount Bolt/Washer & Limit Screws (EXC)

Spare parts for the Superbe Pro FD-SB00-B front derailleur. This is essentially the mounting body that the parallelogram plates and thus cage hang off of.  Included is limit screws, braze on mounting...

Suntour Superbe Pro RD-5200 Rear Derailleur: Mid 1980's - Friction - Silver (Great)

This mid 1980's Superbe Pro rear derailleur is considered one of the best friction derailleurs ever!  It's super smooth and quiet, and reliable to no end.  Plus, it looks great!  It may not have the...

Suntour Superbe Pro RD-5200 Rear Derailleur: Mid 1980's - Friction - Silver

This mid 1980's Superbe Pro rear derailleur is considered one of the best friction derailleurs ever!  It's super smooth and quiet, and reliable to no end.  Plus, it looks great!  It may not have the...

Campagnolo Nuovo Gran Sport Downtube Shifters: #1014/1 - 1974-1983 - Twin Downtube Clamp - Knurled Nuts (EXC+)

In my opinion, these are the prettiest of all the vintage Campy shifters due to the gorgeous milled & domed end caps.  These were produced from 1974-1983. Lever blades are the same blades used on...

NOS Campagnolo Racing T Triple Inner Chainring: 30t x 74mm - 8/9 Speed

30t granny / inner ring from the 1980's to early 1990's Racing T triple crank Condition New old stock Details 30t x 74mm

Campagnolo Nuovo Record BMX RIGHT Driveside Crank Arm: 806/BMX - Blue Ano - 175mm (Thread Weirdness)

Orphan drive side arm for your Campy BMX cranksets! These were released only in 1980 and 1981, maybe 1982.  This is for use with one 1/8" chainring Condition Note there is something odd going on...

Campagnolo #1014 Nuovo/Super Record Downtube Shifters: Clamp On - Black Cable Stops - Flat Plate s (Near Mint)

Super clean clamp version of the NR/SR DT shifters of the 60's, 70's, and 80's.  These have the flat cover plates (part #603) and flat head screws, which were used up until the late 1970's...

NIB/NOS Campagnolo #1014 Nuovo/Super Record Downtube Shifters: Clamp On - No Cable Stops

Super clean clamp version of the NR/SR DT shifters of the 60's, 70's, and 80's. Condition New old stock, never installed.  No cable marks in slots, clamp band appears to have never been bent around...

NOS Campagnolo EC-RE113 Index Ratchet Ring: RIGHT 9 Speed Record & Chorus - Non-Recessed

OEM indexing shift disc for your early 9 speed Ergo shifter Condition New old stock Details Right/Rear

Campagnolo Chorus Carbon 10 Speed ErgoPower Shifters: Triple/Double - ErgoBrain Computer (MINT Low Miles)

Fresh ErgoPower shifters from the first 10 speed Chorus carbon gruppo, plus an Ergo-Brain computer.  Tough to find in triple! The Ergobrain is Campy's version of Shimano Flightdeck, but better! It...

NOS Specialties TA P209 Criterium 6-Bolt Track Chainring: 1/8" - 51t - Single Ring

This Criterium pista ring is 1/8", identified via the stamped "3" which refers to 3mm thickness. This is a 6 bolt chainring for use on Pro 5 Vis adapters. These are original 1960's, 1970's, and early...

NOS Specialties TA P205 Cyclotouriste Pro Vis 5 Track Chainring: 1/8" - 47t x 50.4mm - Single Ring

This cyclotouriste pista ring is 1/8", identified via the stamped "3" which refers to 3mm thickness. These are original 1960's, 1970's, and early 1980's first production rings for the T.A. Pro 5 Vis...

1995 CODA M501 Crankset: 175mm x 42/32/22t - Silver (DISPLAY ONLY)

Gorgeous but flawed mid 1990's mtb crankset that was stock on Cannondale's high end models in 1995.  The M501 was the first of this design, but was recalled due to the arms/rings being made from too...

Shimano Dura Ace Downtube Cable Stop Adjuster Lever: Right/Rear - SM-CT74 - Concave - Bolt (Sold Individually)

This adapter bolts onto your vintage bike's downtube braze on mounts, and act as cable stops for STI, Ergo, and bar end shifters.  Includes stainless steel mounting bolt. Condition New, no package

NIB/NOS Shimano Dura Ace Shifter Hardware Kit: Downtube Cable Stop Adapter Barrel Adjusters (SM-ST74) - BB Cable Guide (SM-SP17-M) - Ferrules

The adapters bolt onto your vintage bike's downtube shifter mounts, and act as cable stops for STI, Ergo, and bar end shifters.  This is the version with housings that are curved (concave) to fit...

NIB/NOS Shimano Ultegra ST-6500 / ST-6501 Name Plate Cover: RIGHT/REAR - Bracket - 9 Speed STI

Hard to find RIGHT SIDE OEM replacement nameplate / faceplate cover to fit both ST-6500 and ST-6501.  The plates are exactly the same for both models, the only difference being the 6501 now has the...

NOS Sachs Power Grip Extreme 7 Speed Grip-Shifters - 3x7 - Original Cables/housing (Take Off)

Almost fresh Sachs top level gripshifts! Black grip covers, original round profile, labeled "extreme" version. Cable housing is original Sachs logo. Condition New old stock, take offs.  Shifters...

Campagnolo Nuovo Record / GS Bar End Shifters: #1012/1013 - Blue Covers (EXC, Missing One Clamp Wedge)

1960's - 1980's Campy barcon shifters.  These have blue covers.  They were the only bar ends available in the era by Campy, so they came with any group that needed barcon shifters; Nuovo Record,...

NIB/NOS Shimano 105 ST-1055 STI Shifter Faceplate Cover: Front / Left

OEM replacement face plate for your early 1990's 105 STI shifter. Condition New old stock in package Details Front / left cover onl

NIB/NOS Shimano 600/Ultegra FC-6400 Tri-Color Crank Arm: Left / Non-Driveside - 175mm

Fresh non-drive arm for your tri color 6400 crank in 175mm Condition New old stock in oem packaging, factory sealed. Presumed perfect Details

NOS Sugino GT Left / Non-Drive Crank Arm: 170mm - Red - Old School BMX Vintage 1980's (Take Off?)

Fresh left side crank arm for your 1980's bmx! Condition  New old stock, possibly a take off. I can't tell if the crank has ever seen a spindle, but it's possible as the ano inside it isn't...

Suntour Command Shifters: 7 or 8 Speed - SL-CD00 (Near Mint+ Low Miles)

Command shifters were Suntour's answer to STI and Ergopower shifters, and are often referred to as butterfly shifters.  They mount on drop road bike handlebars, usually to the inside of the brake...

NOS Simplex JUY 59 Rear Derailleur & Shifter: Riveted Badge - Plunger Push Rod Design - 1959 & 1960 - RARE

The JUY 59 was introduced in 1959 as an updated replacement for the JUY 51.  The overall profile is relatively similar, and the 59 has some significant upgrades.  First it did away with the...

NOS Simplex SLJ / Mavic SSC Retrofriction Shifter Left Spring #3667

Do you have a pair of Simplex or Mavic retrofriction downtube shifters that aren't working up to the full potential of these highly efficient models? Likely the culprit is the clutch springs.  These...

NOS Simplex #2560 SLJ Rear Derailleur Lower Tension Spring: Super LJ 5000 / AR 615 NI

We came into a small supply of Simplex rear derailleur rebuild parts! Lower spring for all Super LJ 5000 models (5000 GT, 5000 T, 5000 CT) plus SLJ AR 615 NI / AR-615 Condition New old stock. If...

NOS Huret Jubilee Rear Derailleur Cage Return Spring: #2219 - Short Cage (Lower)

We came into a little supply of Huret Jubilee rear derailleur rebuild parts!  This is the lower spring, technically the derailleur cage return spring.  This one is for short cage derailleurs...

NOS Simplex #2975 Derailleur Cage Stop Pin: 10 Pack - Prestige / SX / LJ / ETC (Pack of 10 Pins))

This pin screws into your rear derailleur's outer cage plate and stops the cages rotation when the pin contacts the derailleur body. This is the pin required for Prestige derailleurs, some LJ and SX...

NOS Simplex #2975 Derailleur Cage Stop Pin: Prestige / SX / LJ / ETC (Sold Individually)

We came into a small supply of Simplex rear derailleur rebuild parts! This pin screws into your rear derailleur's outer cage plate and stops the cages rotation when the pin contacts the derailleur...

NOS Huret Shifter Mount: Right - 28.6mm Downtube - Allvit / Svelto For Schwinn

This is a downtube mount clamp for a right shifter, Svelto and Allvit models (probably others).  This shifter was used heavily on Schwinn lightweights (Continental, Traveler, World...) and even...

Hope Retainer Ring: 32t x 104mm - 1x10 / 1x11 / 1x12 - Orange (NEW)

Hope's Retainer Chainring has a narrow/wide tooth configuration designed for 1x10, 1x11 and 1x12 set-ups without the need for a chain guide. *New for 2020* - New tooth profile option compatible with...

NIB/NOS Shimano 600 1st Gen 3 Bolt Chainring for GC-100: 52t

Rare 3 bolt chainring from the 1st generation Shimano 600 GC-100 crankset which ran from 1975-1977 Condition New old stock in retail package Details

NIB/NOS Mavic Outer Chainring: 54t x 144 - For SSC 630 + Starfish 631/632

Rare chainring from the 1980's and 1990's from the SSC 630 and Starfish 631/632 cranks Condition New old stock in factory sealed oem bag Details

NIB/NOS Zeus 2000 6-Speed Freewheel: 13-20t - Steel Cogs

Gorgeous and buttery smooth high level freewheel from Zeus  Oddly, all 6 cogs are steel where typically the largest 5 were alloy.  It uses the Atom / Regina splined freewheel remover.  This is a...

Campagnolo C-Record Rear Derailleur: Prototype / 1st Gen (Near Mint)

The 1st generation Corsa Record rear mech was in a way a rebellious design.  It was in an era of the radical Dura Ace AX and Suntour's smooth shifting modernized derailleurs, and campy refused to...