COMPONENTS

Selle SMP Lite 209 Saddle: White & Pink "Lady" - Stainless Steel Rails (NEW)

Harder to find white with pink version, that for no real reason says "Lady". Per the SMP website it's the exact same saddle as the solid color versions. It's not a women's specific saddle, both women and men give it glowing reviews. This model is a...

NIB/NOS Galli Criterium Brake Levers: Red Ano - Drilled - Gum Hoods - RARE

RARE red version of the 1980's Galli Criterium levers. These are seen occasionally in silver and gold, but almost never in red. The lever blades are drilled on the lower half's front and sides and Galli logo engraved vertically at the top.  These...

NIB/NOS San Marco Titanio 200 Saddle: Early 1990's - Rare MTB/Road

The Titanio 200 was named for it's titanium rails and 200 gram weight. It ran parallel with the carbon San Marco Karbonio the only difference being the rails and the Bontrager KA Karbonio K651 which had additional cutouts at the rear end. It is...

LP Composites Bar Ends: Braided Carbon - BE/8 - Black/Yellow (Near Mint+ Low Miles)

Very rare set of straight and short bar ends, circa 1990's and made in White Salmon, Washington. These straight versions are much harder to find than the curved LP Braids & Braids Jr. Perfect for your retro mtb restoration Condition Near mint or...

FSA Vision Tri-Gel Road/TT/Tri Saddle: Black (New)

Supportive and sleek saddle for triathlon and time trial racing Condition New, no box Details Black

Kashima Five Gold 4P NJS Saddle: Keirin / Track - Vintage 1980's - 44mm Rails - Black Leather

Early version of the Kashima FG4P saddle! The vintage versions of the FiveGold use standard 44mm rail width to fit your standard track/road/bmx seatpost, while the modern reproductions use a special narrow 30mm rail spacing that requires a special...

NIB/NOS Ale Art.90 Inox Stainless Steel Toe Clips: Small - Silver / Red / White / Green

Super light and attractive Italian made SS toe clips from Ale. Condition New old stock in retail box. Slight shop wear Details Pair Size: Small Silver

NOS Campagnolo Chorus #545(?) Aero Seatpost: 26.8mm - No Logo - Early 1990's (take-off)

I'm not sure which model this aero post is, it doesn't line up perfectly with any model. It most closely matches the Chorus 545 as it's taper is a little less exaggerated than most and there's no logo on the aero section, but it doesn't have the band...

NIB/NOS JPR 1" Threaded Headset: ITA Threads - Dural Ultralight 68g - JP Routens Designed / BF Belleri Built(?) - Black - RARE

From the workshop of Jo Routens / Jean Paul Routens, an exceedingly rare and extra light all-aluminum French headset from the 1970's into early 1980's! It was the prime headset choice of constructeurs for high dollar low gram headsets in this era. It was...

Chris King 1" NoThreadset Stem Top Cap: Silver - One Inch (New)

Top cap for your vintage or modern one inch Chris King NoThreadset threadless headset in silver. Condition New, no package. Slightest shop wear, though they're way cleaner than they look in the pics. In the hand these look brand...

NOS Mafac Rear Cable Hanger w/ Guide Pulley Wheel for Mixtie: Binder Bolt w/ Stop Pin (RARE)

This odd contraption is a seatpost bolt mounted cable stop that features a roller wheel to redirect the direction the cable travels.  It is made for mixtie frames where the cable is coming from the bottom making it's way up to the seatstay mounted...

Cinelli Unicanitor MOD 50 Uncovered Plastic Saddle: 1960's - No Cinelli Logo - RARE (Near Mint Low Miles)

Before the legendary Cinelli Unica-Nitor saddle was released in the 1960's, all saddles were either Brooks style solid leather, or plastic junk.  The Unicantor was the first to have a plastic shell, (some) covered with a bit of padding and leather...

Campagnolo C-Record Toe Straps: Laminated Leather - SS Inox: White/Grey Leather - Script Logo (Pair, EXC Supple)

Lovely set of Campy toe straps from the mid/late 1980's to mid 1990's.  These are the straps most often supplied with C-Record, Chorus, Croce D'Aune, etc pedals Condition Excellent used shape. Dirty leather but very minimal actual wear. Leather is...

Campagnolo Athena D500 Sidepull FRONT Brake: Monoplaner Styling - 1988-1992 (Near Mint)

These C-Record era brakes are often confused with Monoplaner brakes.  While they are the same basic shape and era, true monoplaner brakes feature both arms "hinged" together.  They are both in the same plane (thus mono-planer) and neither side...

NOS Selle Italia Dual Saddle: Wild Suspension Nose! Vintage Early 1990's - Black Leather

This rare and bizarre ~1992 saddle uses a suspension nose that follows the natural movement of the body to reduce pressure on the genitals when in the drops or climbing.  It has a loud rear bevel that somehow reminds me of a 1960's exotic sports car...

Maxxis Minion DHF Tire: 26 x 2.5" - 3C / EXO / TR / WT - Folding (Almost New <50 Miles)

Solid trail, All-Mountain, enduro tire from Maxxis.  Tubeless ready.  These tires have oodles of grip and great durability. Condition Close to new, ridden under 50 miles. Molding ridges still on edge knobs. Slightest dirt in treads...

NIB/NOS 3T LESS 199 XL Drop Handlebar: 46cm (44cm) x 31.8mm - Top Shelf Ultralight - Anatomic Bend - Black - Vintage 2000's

Super rare, light, and stiff top shelf drop bars from the mid 2000's. It was often issued to pro race teams. The 199 is the claimed weight (of course some variance).  It's made from triple butted fancy alloy called Alutan Alloy, and it's hardened in...

NOS 3T THE Drop Handlebar: 46cm (44cm) x 25.8mm - Anatomic Bend - Black - Vintage 2000's

This early 2000's drop bar from 3T was their anatomic ultra-stiff mid range model, which came out a few years before their THE XL which was OS 31.8mm clamp. This one is a 25.8mm clamp designed to fit both 25.4mm and 26.0mm stems. Condition New old...

NOS 3T THE XL Drop Handlebar: 46cm x 31.8mm - Anatomic Bend - Black - Vintage 2000's

This mid 2000's drop bar from 3T was their anatomic ultra-stiff mid range model. The "XL" means its a 31.8mm OS clamp size, in an era the industry standard was slowly changing from 26.0mm to 31.8mm.  Note that the head on photo I'm using is of our...

NOS 3T THE XL Drop Handlebar: 44cm x 31.8mm - Anatomic Bend - Black - Vintage 2000's

This mid 2000's drop bar from 3T was their anatomic ultra-stiff mid range model. The "XL" means its a 31.8mm OS clamp size, in an era the industry standard was slowly changing from 26.0mm to 31.8mm.  Note that the head on photo I'm using is of our...

NOS 3T THE XL Drop Handlebar: 42cm x 31.8mm - Anatomic Bend - Black - Vintage 2000's

This mid 2000's drop bar from 3T was their anatomic ultra-stiff mid range model. The "XL" means its a 31.8mm OS clamp size, in an era the industry standard was slowly changing from 26.0mm to 31.8mm.  Condition New old stock, no package. Never...

NOS DIA-COMPE Sidepull Brake Quick Release Barrel Adjuster: N & G-Series (Sold Individually)

This QR barrel adjuster came stock on various 1980's DIA-COMPE sidepull brakes. Condition New old stock Details Sold individually  Fits: G500, G500N, AC500G, AC-QS Series, QS-N Series, G-Series (G-500 / G530N / G730N), and others

Stella Azzurra Pisa Seatpost: 27.2mm - 2 Bolt - Alloy - Aero (EXC+)

Rare semi-aero seatpost from small Italian boutique Stella Azzurre, circa early/mid 2000's or a touch later. Two bolt micro-adjust clamp    Condition Post is near mint from just below the bottom of the decals to the top of the post. ...

Vintage 700c Steel Road Fork: 1" Threaded - Fully Sloping Crown - Tange Steerer - White - 1980's 1990's

Unidentified but well built vintage road bike fork, with a fully sloping crown and Tange steerer. Curved legs. Condition Excellent lightly used shape. A few chips and scratches though the paint is pretty nice.  No bends/dents/cracks Details 1"...

1990's Ritchey Road Logic Fillet Brazed Fork: 1" Threadless - 700c - Yellow

This is a mid-gen fillet brazed Ritchey road fork. Tom Ritchey's first road forks were biplane crowns, he switched to fillet brazed somewhere in the early 1980's.  This 1990's version features Ritchey logo engraved into each fork crown shoulder,...

Ritchey True Grips End Plugs: Vintage 1990's (Pair, EXC+)

Rare original 1990's handlebar end plugs that came with True Grips from ~1992 to 1997+. They were found on both fillet brazed and tig welded frames such as the P-21, P22, Ultra, etc.  Condition Excellent or better lightly used shape. No damage,...

Wolf Tooth Seatpost Clamp Binder w/ Rainbow Oil Slick Ti Bolt upgrade: Blue (MINT <200mi)

Pretty blue anodized seat binder clamp with an upgraded rainbow oil slick titanium bolt! Condition Less than 200 miles, mint Details 34.9mm MSRP w/bolt upgrade: $38

Shimano SM-RT64-M 180mm Centerlock Rotor: Lockring (NEW)

High quality centerlock rotor disc brake rotor.  Includes  lockring. Condition Brand new in box (though the box is an incorrect XTR box) Details 180mm

NOS Mafac Competition / 2000 / Tiger Straddle Cables: Ball End - 115mm - Original (Pair)

Hard to source original double ball end straddle cables for the earlier Mafac Competition, GT, and Tiger centerpull brakes. ~115mm end to end Condition New old stock Details Sold in pairs

ShockStop Handlebar End Plugs: 1940s 1950's British - Black (Near Mint, RARE)

Super rare rubber plugs from Shock Stop of England, circa 1940's and 1950's. The company was better known for their Shockstops Honking Rubbers from the same era. Condition Near mint used shape. Supple and not deteriorating. Some cracking in...

Handlebar End Plugs Lot: 1940s 1950's French / British - GEM - GB 30mm - Milremo - OGK - 6 Pc

Random lot of bar end plugs, mostly from the 1940's and 1950's. Condition Mixed condition. The GB is near mint though missing the "sleeve" portion. GEM is clean with a couple edge scuffs, OKG is near mint, one Milremo clean two dirty Details (1)...

GB Handlebar End Plugs: 1940s 1950's French - G. Blassieaux - 25mm - White (Near Mint, NOS?)

The French "GB" as in G. Blassieaux of Paris. No relation to Gerry Burgess or Gilles Berthoud. These lovely expander type bar end plugs were sold aftermarket. They were one of the most popular plugs for randonneur bikes in the 1940's and 1950's...

Constrictor Combined Handlebar End Plugs: 1950's - Patch Kit & Weed Stash - RARE!!!

This rare part turns the inside of your bars into a place to stash your shit so the cops can't find it! Or just a patch kit and some cash! The Constrictor labeled plugs seal the compartment up.  They show up in the 1955 Constrictor catalog and a...

NOS(?) Legnano Seatpost Binder Bolt: Stud & Wedge : 12mm 3pc - Original

Super rare seat binder bolt for Legnano and Frejus bikes from the 1940's 1950's and 1960's. This is the wedge and stud three piece version, 12mm diameter. It is part number 10221 in the 1949 Doniselli catalog. There was a run of reproduction ones done a...

NOS Alloy Seatpost Binder / Stem Clamp Bolt: Hex - Tabbed - M8 x 32mm - 1950's 1960's 1970's Vintage

Nicely made aluminum seatpost binder bolt, likely from the 1950's to 1970's. Ultralight at 7g for the bolt and nut.  If you know who made this please contact me. Condition New old stock, very close to pristine Details Alloy M8 x...

Olmo Seat Binder Collar Made By Magistroni: 28.6mm - 1940's 1950's - Steel

Early OLMO seatpost binder collar clamp, made by Magistroni who made collars for many builders.  This was used on a wide swath of models/years by Olmo in the 40's 50's and maybe into 60's. Condition Very good used shape. Collar itself has general...

NIB/NOS T.A. Modele Turino REF #40 Leather Cleats: Anquetil - Nail On

The Specialties TA Modele Turino cleats are the leather version, and the lightest TA made. These are for the old leather cycling shoes, and nail directly to the sole.  Great for display cases as well! Condition New in sealed factory packaging,...

NIB/NOS Ritchey Pro Road Threadless Stem: 90mm x 26.0mm - 73 Degree - Black

Top quality alloy road/mtb stem out of Tom Ritchey's workshop.  Standard road 73 degree drop, or flip it for a semi high rise. Condition New in box Details Length:90mm Bar clamp: 26.0mm Rise/drop: 73 degree standard road drop 4 bolt...

Ritchey Classic Polished Alloy Seatpost: 31.6mm x 350mm - 25mm Offset - 2-Bolt (New)

Mirror polish 2 bolt post from Ritchey! The proven 2-bolt design on this classic provides a class-leading balance between strength, weight and adjustability. The two-bolt design is easy to adjust and holds tight. Its low profile clamp reduces stress...

Cinelli Mod #1 Road Quill Stem: FRENCH 22.0mm - 70mm x 25.4mm - 1950's 1960's (Rechromed Mint)

Gloriously rechromed 1950's or 1960's Cinelli #1 stem for French bikes with 22mm steerers! It's shorter than most at 7cm.  It has the engraved oval Cinelli Milano logo. The entire body of the stem along with the bar clamp bolt & nut have fresh...

3TTT Record Regolabile Adjustable Stem: 25.8mm - Pista Stayer Major Taylor Style (Near Mint+)

Super rare track version of the 3T adjustable quill stem.  It's Major Taylor style, with the bar clamp slung below & sliding along the extension.  With the big drop this creates, this was used on track bikes and stayer bikes...

Cinelli 1R Flying C Pantograph Quill Stem: 125mm x 26.4mm - Polished (Near Mint)

This aero Cinelli stem from the 1970's and 1980's was the flagship model (this one is post-1978 due to the Flying C logo).  The 1R stands for 1 Record and features a cool hidden bar clamp bolt!  This particular stem is a rare version with...

NIB/NOS Cinelli XA Quill Stem: 120mm x 26.4mm - Black - Shims

Cinelli's aero styled alloy quill stem, circa 1980's to mid 1990's.  Condition New old stock in retail box. Factory sealed bag contains bar clamp bolt and 5 colored bar clamp spacers shims.  The stem has never been installed on a bike, but a...

NOS Ringle Moby Deuce Seatpost: 28.6mm x 360mm - Silver Anodized - Vintage 1990's MTB (take-off)

Gorgeous long example of one of the more popular seatposts for restored 1990's and early 2000's mountain bikes.  This 28.6mm size is needed for many vintage Ibis frames including Mojo Ti and steel, alloy Alibi, Ti Road, Cousin It tandem,...

Salsa Cycles 1 1/8" Stem Top Cap: Silver (NEW)

Shiny Salsa Cycles stem/headset top cap in polished! Condition  New, no package Details 1 1/8 inch threadless  

Shimano Dura Ace Downtube Cable Stop Adjuster Lever: Right/Rear - SM-CT74 - Concave - Bolt (Sold Individually)

This adapter bolts onto your vintage bike's downtube braze on mounts, and act as cable stops for STI, Ergo, and bar end shifters.  Includes stainless steel mounting bolt. Condition New, no package Details Right / rear only Sold...

NOS Shimano Dura Ace STI Cable Stops for Downtube Braze On: SM-ST74 Concave (Sold in Pairs)

These adapters bolt onto your vintage bike's downtube shifter mounts, and act as cable stops for STI, Ergo, and bar end shifters.  This is the version with housings that are curved (concave) to fit around your frame's downtube.  Includes...

NIB/NOS Shimano Dura Ace Shifter Hardware Kit: Downtube Cable Stop Adapter Barrel Adjusters (SM-ST74) - BB Cable Guide (SM-SP17-M) - Ferrules

The adapters bolt onto your vintage bike's downtube shifter mounts, and act as cable stops for STI, Ergo, and bar end shifters.  This is the version with housings that are curved (concave) to fit around your frame's downtube.   This is...