COMPONENTS

NOS Zeus Brake Parts LOT: New Racer / Criterium - Arms Springs Hardware...

Handful of spare arms and hardware from Zeus New Racer (and other) brakes. The top two brakes are complete minus pads and barrel adjusters Condition New old stock mostly. Details

NIB/NOS Zeus New Racer Brakeset: Nutted - 55/40mm Standard Reach - Silver

Very rare mid level brakeset from the early to mid 1980s from Spanish component maker Zeus. This is what I believe to be the earlier version that says "Zeus" on the arms vs later ones that say "New Racer". These have nice chrome hardware and unique...

Nitto Hi-Crown "Girder / I-Beam" Quill Tall Stem: 70mm x 25.4mm (RARE)

This very early Nitto stem in the style of the 1930's Reynolds Girder stem or 1950's GB I-Beam stem.  It was produced from roughly 1965 to the late 1970's.  From my research, this could be the very first stem Nitto made.  It's milled out...

Mavic 305 SSC/Zap Headset: 1" Threaded - Silver/Black - Italian (Near Mint, But Missing Band)

Rare and sought after Mavic headset from the SSC & Zap groupsets, produced 1989-1999.  This the road oriented version, whereas the 315 and 316 were marketed for mountain bikes (of course it works for both road and mtb).  It features a...

Modolo Professional Brake Levers: Gold - 1st Gen 1970's - Gum Hoods - Inter Pat (Near Mint+ LOW MILES)

Very early example of the Modolo Professional levers in gold anodizing. These have the early Modolo gum hoods that were used before the 919 Anatomic hoods released in 1982. They also oddly had lever blade top decals instead of engraved for the diagonal...

ENVE Carbon Seatpost: 30.9mm x 400mm - Zero Offset (Barely Used Mint)

Super lightweight, stiff, and dampening post from ENVE! Condition Just barely used, no real wear to note. Details Diameter: 30.9mm Length: 400mm Setback: 0mm Black Weight: 204g MSRP: $300

Shimano Deore BL-MT63 Cantilever Brake Levers: Silver/Black - Foam Covers (EXC)

Lovely and affordable canti levers for early mountain bikes. These were three finger levers. Condition Excellent lightly used shape. Only light cosmetic wear. Foam lever blade covers aren't tacky or deteriorating.

Gorilla Brake Beefer Booster: Black Ano - Vintage 1990's - Made in Durango (EXC+)

Rare Gorilla brake booster for cantilever brakes, made in Durango Colorado. Condition Excellent or better lightly used shape. Not faded, just light ano wear

YETI Step Down Ferrules For ARC, ARC-AS, FRO, ULTIMATE (Sold Individually)

Original step down brake cable housing ferrules for Yeti Pro Fro, ARC, ARC-AS, and Ultimate from the 1990's. Condition Average used shape with cosmetic wear. Details Sold individually

Cunningham WTB Speedmaster Roller Cam / Cantilever Brake Adjuster Nuts & Ti Springs & (Pair)

These adjuster nuts / spring holders were used first on the Charlie Cunningham WTB Rollercam brake, then on some versions of the WTB Speedmaster canti. The springs are the same ones used on rollercams, but I'm not sure rollercams ever had them with a...

Cantilever Brake Booster Set: Front/Rear - Vintage 1990's - Red

Front and rear set of brake boosters for cantilever brakes. Condition Very good used shape, some light paint wear.

Seat Shifter R2: Seat Position Adjuster for Tri Position on Road Bike - Vintage 1990's - Mount To Seat Head - Black

Rare 1990's time trial / triathlon seat adjusting gizmo! This allows you to shift the seat position forward by pulling a lever, putting you in optimal aero position to ride on the aero bars and then shift back to ride on the drops/hoods.  There...

Suntour Superbe LD-2050 Downtube Shifters: 1st Gen 1970's 1980's

These are the first and most beautiful/intricate of the Superbe shifters. They have a satiny polished finish, nice lever cutouts, and gorgeous pebbled outer plates.   Condition  Very good to great used shape. The hardware could be cleaned up...

Specialized Power Arc Saddle: 155mm - Black - Large Cutout (New Take-Off)

Immensely popular saddle with a short nose and huge cutout, combined with a wide width. Condition New, removed from a brand new bike. Details Width: 155 rails: Hollow Chromoly

Fox Transfer Performance Dropper Seatpost: 30.9mm x 460mm - 150mm Travel - PNW Loam 2 Remote Right (EXC+)

Popular dropper post from Fox, with upgraded PNW Loam 2 remote lever (right side) Condition Excellent or better lightly used shape. Very minimal marks. Seems to work fine. Details 30.9mm Length: 460mm Travel: 150mm Lever: Right side mount MSRP:...

Avid Juicy Seven Hydraulic Disc Brakeset (EXC)

Popular Juicy 7 brakes! Condition Excellent used shape with light cosmetic wear. Note the front caliper is not attached to it's hose Details Black No rotors

NOS Look Dynamic Memory Eyelet Tool for Delta Cleats

This tool is used for the screw in the fourth center hole in some LOOK delta cleats. Condition New Details Red

NIB/NOS San Marco Titanio 200 Strada Soft Saddle: Early 1990's - Rare MTB/Road

The Titanio 200 was named for it's titanium rails and 200 gram weight. It ran parallel with the carbon San Marco Karbonio the only difference being the rails and the Bontrager KA Karbonio K651 which had additional cutouts at the rear end. This one...

NOS(?) EDCO BMX Competition Headset: Red Ano - 1st Gen - Italian Threaded - 1970's 1980's

  32.6mm flange diameter for BMX frames! Edco of Switzerland is known for making high precision bicycle components since 1902, like most Swiss things (Watches, knives, cheese?).  This headset is completely made of alloy, and weighs a...

NIB/NOS Campagnolo Pedal Toe Flip Kick Tabs & #767 Toe Clip Bolts (Pair)

Pair of toe clip bolts and pedal flips.  These attach to your Record SL or Gran Sport (and many other makes/models) pedals and allow you to flip the pedal over with your foot easier.   Condition New old stock in package, factory...

Campagnolo Super Record Brake Levers: #4062 - White Hoods

Drillium Super Record levers with original last generation white hoods. Condition Average used shape with plenty of cosmetic wear, but still fully functional! Hoods are functional and supple but ugly and have hinge tears. Details Non-aero right...

DIA-COMPE New Gran Compe NGC-202 Brake Levers: Champagne Ano! Dual-slotted - Non-aero

The NGC202 was DIA-COMPE's top of the line non-aero brake lever in the 1980's. These have two rows of slanted slots milled into each blade, the "GC" logo engraved at top, and a cutout on the sides. This pair is special as it's anodized a bronze /...

NIB/NOS Zeus Super Alfa 71 Centerpull brakeset + Half Hood Brake Levers: Cream Hoods - Cables/Carriers/Stops - Mafac/Universal 61 Clones

This is a rare high end brakeset Zeus put out in the early to mid 1970's. The half hood brake levers are faithful clones of the Mafac half hood levers (with the addition of a prominent and pretty hash texture on the blades). Presumably the hoods would...

Velo Orange Medium Setback Seatpost: 31.6mm x 400mm - Silver - 16mm Layback (NEW)

Classically styled seatpost with a modern single bolt clamp for ease of setup and adjustment. Condition New with tag, slight shop wear microscratches Details 31.6mm x 400mm Weight: 304g MSRP: $62

Campagnolo Nuovo Record Brake Levers: #2030 - NOS GUM Hoods (Near Mint+)

3rd generation NR levers from ~1978-1985. This is the only generation with the shorter reach levers. Brev Camp in pivots Comes with a set of mismatched Shield logo gum hoods, tan and brown. Condition Near mint or better lightly used shape levers plus...

Campagnolo Nuovo Record Brake Levers: 1st Gen #2030 - NOS GUM Hoods (Near Mint

Rare set of first gen NR levers, identified by the round hole on the back of the blades vs the later (and MUCH more common) lever's "U" shaped opening.  The lever blade is also slightly different, with a bit more bend producing a LONG reach and a...

Campagnolo Super Record Brake Levers: #4062 - Brown GUM Hoods (Near Mint & One w/ Scrape)

Drillium Super Record levers with their original brown/tan gum hoods. Condition One lever is near mint or better with barely a mark, the other has a scrape down the outside but otherwise near mint shape.  The gum hood on the scraped one is supple...

Campagnolo Super Record Brake Levers: #4062 - Brown GUM Hoods (Near Mint+)

Drillium Super Record levers from their 2nd generation circa ~1976-1983. These come with their original brown/tan gum hoods. Condition Near mint or better lightly used shape. Levers have some tiny marks but none significant.  Hoods are supple and...

Campagnolo Super Record Brake Levers: #4062 - White Original Hoods (Mint LOW MILES

Drillium Super Record levers from their third generation circa 1984 to 1987. These are identified by their white hoods, no markings in lever pivots, and shield logo clamps. Condition These are so clean I almost thought they were NOS. They're mint with...

Campagnolo Nuovo/Super Record Brakeset: V1 - #4061/1 - Short Reach (Near Mint+ Low Miles)

This is a Campy Super Record V1 brakeset circa 1974-1982.  If you're building a top level classic road bike to show, these are for you. These are the 1st gen of Super Record brakes, and are identical to Nuovo Record with the exception of their...

Campagnolo Super Record V2 Rear Brake: #4061 - Standard Reach (Near Mint+ Low Miles)

Show worthy example! The gold standard for brakes on 1980's Italian road bikes!  These are the 2nd version of the SR brakes circa 1983-1987, with the script logo and alloy tire guides dipped in rubber.  Condition: Near mint or better with...

ENVE Carbon Road Stem: 90mm x 31.8 - 6 D (Near Mint)

Ultralight carbon road stem from ENVE Composites.   Condition Near mint lightly used shape. Not much worth mentioning aside from dirty logos (which I didn't try to clean) Details Length: 90mm Angle:  +/-6 D Clamp: 31...

Shimano XT PD-M8000 SPD Pedals (Near Mint)

Reliable and light PD-m8000 XT clipless pedals!   Condition Near mint lightly used shape with light cosmetic wear. Right bearing is perfect, left is buttery smooth but has the slightest bit of play developing (most people wouldn't even notice...

SEVEN Cycles Titanium Threadless Stem: 1 1/8" x 110mm x 26.0mm - Vintage 1990's (Near Mint+)

1990's or early 2000's ti stem from SEVEN out of Somerville Massachutsets.  This early version features a single bolt bar clamp, replaced in later years with a removable faceplate.   Condition Near mint lightly used shape.  Pretty...

Shimano XTR ST-M950 8-speed Rapidfire Shifters / Brake Lever Combos (Near Mint)

Clean set of 8 speed XTR gunmetal grey shifters! The ST-M950 was made in 1996 and 1997, and in 1998 they released the ST-M951 (which was the same shifter but modified to work with the new SL-SS95 remote shifter). Condition Near mint lightly used...

Paul Component Set N' Forget Thru Axle: Front 15mm x 1.5 x 145mm - Silver/Orange (Near Mint+)

Trendy upgrade thru axle from Paul of Chico California!   Condition Near mint to mint with very low miles. Only a few tiny marks. Details Silver w/ orange cap 15mm Overall shaft length: 145mm MSRP: $83

Chris King Dropset 5 Headset: Silver/Pewter (Perfect Bearings, EXC+)

Integrated headset from Chris King Condition: Perfect bearings, excellent or better cosmetically. Top cap is pewter vs the silver race, and cap is a bit more worn. Details: 42mm 45x45 upper bearing for 6.85-7.05mm bearing ream depth. 52mm 45x45...

Chris King Inset 8 Headset: Black - 1 1/8" > 1 1/4" Tapered - 44mm (Perfect Bearings)

Built for the next generation of tapered road forks the Chris King InSet™ 8 is built to fit contemporary road and cross bikes that utilize 1-1/8” to 1-1/4”tapered steerer tubes and a 44mm headtube. Our InSet™ 8 combines our...

Chris King 1 1/8" NoThreadSet Threadless Headset: Sotto Voce Red (Near Mint+ LOW Miles)

Nice CK headset for your 1 1/8" fork.   Condition: Near mint to mint barely used shape with very low miles. Only a couple tiny marks in the ano. Details: Size: 1 1/8 inch threadless Color: Red Sotto Voce Includes baseplate MSRP: $207

Chris King 1 1/8" NoThreadSet Threadless Headset: Sotto Voce Black (Near Mint+ LOW Miles)

Nice CK headset for your 1 1/8" fork.   Condition: Near mint to mint barely used shape with very low miles. Only a couple tiny marks in the ano. Details: Size: 1 1/8 inch threadless Color: Black Sotto Voce Includes baseplate MSRP:...

Chris King D11 NoThreadSet Headset: Pegoretti / Falz - 1 1/8" - Black Sotto Voce (Mint Low Miles)

Very hard to source headset Chris King developed for Dario Pegoretti to fit their frames with oversized head tubes.   From Pegoretti: The design of the D11 uses the proven bearings and components of King’s standard models but features...

Paul Racer Medium Centerpull Brakeset: Polished - 47mm-57mm (NEW, Pair)

Polished, medium reach, center-mount version of the highly rated Paul Racer M centerpulls! Condition   New in boxes   Details Front and rear set Pads, straddle cable, & yoke included Reach: 47mm - 57mm reach Material: 6061...

Dropper Post Remote: Black - 2X Setups Right or Left Side (Near Mint+)

Slim mount dropper lever that works with your double setups! Condition Near mint to mint barely used Details For left or right mount

Fizik Aliante S Celeste Saddle: Bianchi - Magnesium (EXC)

RARE fully Celeste version of the Aliante! Great for your Bianchi Condition Excellent used shape. Looks a bit better in person than in pics. Some light dirt on cover, light scuff/scrape left rear corner.  Details Rails: magnesium Intended...

Fizik Tempo Aliante R3 Saddle: 145mm - Black (New Take-Off)

Fizik's supportive, stable bike saddle for endurance cycling, designed to deliver all-day comfort thanks to double-density foam, a waved profile, and pressure-relieving cut-out. Condition New, take-off from a new bike.  Practically perfect except...

Ergon SMC Men Saddle: Med/Lg (New take-off)

The ERGON SMC saddle provides a wide flat surface to support your sitbones and a generous cutout for your sensitive bits. it takes the idea of a wide, flat, and short saddle from the Specialized Power, and makes it even flatter for  more support...

Campagnolo Model Competition Record Brooks Seatpost Clamp Ear (Single)

From 1958 to roughly 1961, Campagnolo made the Brooks Competition narrow railed version of their 2-bolt Record seatpost (model 1045).  Brooks (Brooks Campagnolo Modell), Ideale, and Unica made this saddle with narrow rails specifically for that...

Campagnolo Super Record 2-Bolt Fluted Seatpost: 1st Gen 1970's! - 26.0mm - Alloy Ears (Near Mint+ Low Miles)

This is a genuine 1st generation Super Record seatpost from 1973-1978.  It is distinguished from the much more common Nuovo Record two-pin seatpost with it's factory flutes, alloy clamp side ears, hollow center pin, tapered top of polished section,...