Specialized V No. 5 Handlebars: 1980's - 42mm x 26.4mm (Near Mint+)

Rare #5 "V" version of first Specialized handlebar produced, from the early/mid 1980's.  Made by Nitto.  These were options on the original red Allez, as well as the Expedition touring bike and a few others. Condition Near mint barely used...

Suntour ARX Front Derailleur: FD-2600 - 28.6mm (Near Mint+ <50 Miles)

This rare early to mid 1980's front derailleur was situated one step below Cyclone MK-2, and was Suntour's response to the then radical Shimano 600 AX groupset.  It has a unique forward facing parallelogram with both limit screws front and center...

Suntour ARX GT Long Cage Rear Derailleur: RD-4500 (Near Mint+ <50 Miles)

This rare early to mid 1980's rear derailleur was situated one step below Cyclone MK-2, and was Suntour's response to the then radical Shimano 600 AX groupset.  It shifts extraordinarily well, just like the Cyclone.  it weighs an...

Shimano Deore XT FD-M735 Front Derailleur: 34.9mm Band Type (Near Mint)

This is a rare band type for the oversized alloy tubing that was becoming popular in this era from the likes of Klein, Cannondale... It is compatible with both the included 34.9mm band and 31.6mm bands (probably compatible with Suntour endless type bands...

NOS Shimano SG-X Dual-SIS Chainring: 46t x 110mm - 7/8s - XTR FC-M900 XT FC-M739 LX FC-M560

Hard to find SG-X Dual-SIS outer chainring for early 1990's 7 speed and 8 speed cranks Condition New Old Stock, no package. Very slight shop wear, as these were sent to me in a bulk oem bag Details BCD: 110mm, 5 bolt Teeth: 46t (F-46) Material:...

1978 Bicycling Magazine Set in Collector's Binder! 10 Issues (Near Mint)

This is a 10 issue set of Bicycling magazine from 1978.  June and July are missing. Get your vintage bike mag fill! These 1970's magazines are full of reviews of high end lightweight road racing bikes, bicycle and car advertisements, etc. ...

1977 Bicycling Magazine Set in Collector's Binder! 11 Issues (Near Mint)

This is an almost complete set of Bicycling magazine from 1977.  Issues January through November are present, December is missing. Get your vintage bike mag fill! These 1970's magazines are full of reviews of high end lightweight road racing bikes,...

1976 Bicycling Magazine Set in Collector's Binder! 11 Issues (Near Mint)

This is a  complete set of Bicycling magazine from 1976.  Issues January through December are present. Get your vintage bike mag fill! These 1970's magazines are full of reviews of high end lightweight road racing bikes, bicycle and car...

1975 Bicycling Magazine Set in Collector's Binder! 12 Issues (Near Mint+)

This is a complete set of Bicycling magazine from 1975.  Issues January through December are present. Get your vintage bike mag fill! These 1970's magazines are full of reviews of high end lightweight road racing bikes, bicycle and car...

1974 Bicycling Magazine Set in Collector's Binder! 11 Issues (Near Mint)

This is a (mostly) complete set of Bicycling magazine from 1974.  Issues February through December are present, January is missing. Get your vintage bike mag fill! These 1970's magazines are full of reviews of high end lightweight road racing...

Schwinn Reporter Newsletter Set in Binder: 1971 + 1972 + 1973 - 36 Editions

The Schwinn Reporter newspaper came in the mail to bike shops every month, and provided the shops with invaluable information related to when new catalogs were coming out, Schwinn racing team info, new models, rushes of new Schwinn dealers and...

Schwinn Reporter Newsletter Set in Binder: 1968 + 1969 + 1970 - 36 Editions

The Schwinn Reporter newspaper came in the mail to bike shops every month, and provided the shops with invaluable information related to when new catalogs were coming out, Schwinn racing team info, new models, rushes of new Schwinn dealers and...

Schwinn Reporter Newsletter Set in Binder: 1965 + 1966 + 1967 - 36 Editions - Stingray Krate / Stik Shift Fastback / RamsHorn

This original Schwinn binder full of Reporters covers the glory years of the Schwinn Stingray!  It misses the introduction of the J38 in 1963, but hits the rest of the big timeline points such as the introduction of the Orange Krate (released in the...

Hope Titanium Disc Front Hub w/ 6 Bolt Thread On Rotor - Early 1990's (Rotor Stuck)

This rare early Hope titanium front hub appears to be one of the model-less Hope hubs before they came up with the Fatso Moniker in 1993.  It features a thread on alloy carrier 6 bolt disc rotor.  The big bummer, the rotor is stuck on the hub!...

Hope Tech Early Disc Rotor: 6-Bolt w/ Thread On Spider - 150mm (Near Mint)

This rare early Hope disc rotor was one of the options for the A.T.D. mechanical disc caliper and maybe the first hydraulics.  It features a thread on alloy carrier to fit Hope's early hubs, which mounts a 6 bolt disc rotor. Condition Near mint...

Hope Tech ATD Mechanical Disc Brake Caliper: 1991-1995 Vintage - Manitou 2 / Marzocchi XC-500?

This rare early Hope disc brake caliper is a piece of 1990's mountain bike history.  This is the first "production" version of Hope's first foray into disc stoppers.  The Mark 1 and Mark 2 were basically prototypes, and were polished silver +...

Pelissier 2000 Professional Rear Hub: Low Flange - 28H x 126mm - Silver (EXC)

The 1970's era 2000 Professional hubs were top of the line race level components, complete with sealed annular bearings. Quite rare, especially in 24 hole. Sought by time trialists and even randonneur riders Condition Excellent used shape.  Decal...

Stronglight Cottered Crankset: 170mm x 52/42t - Chrome (Near Mint+ Low Miles)

This crank was made by Stronglight, for some unknown other manufacturer.  Gorgeous chrome finish, competition style rings, swaged on chrome spider. Great for your French or British randonneur or road bike! Condition Near mint hardly used, show...

NOS Campagnolo Shifter Rubber Covers: British Racing Green - (pair, discoloration)

Rare set of British Racing Green colored covers for Campy Record & Gran Sport bar end shifters, downtube shifters, and quick release lever blades. Condition New old stock, but oddly the color is kind of mottled in spots.  Rubber is supple, and...

NIB/NOS Campagnolo NR/SR/GS/C-Record/Croce Loose Bearings: 7/32" - 18ct - Front Hub - 1970's Bags

Original 1980's 7/32 inch bearings, 18 count, for your Nuovo/Super Record, Gran Sport, Tipo, C-Record, Athena, Croce D'Aune, etc FRONT hubs.  A front hub takes 18 bearings, 9 per side.   Condition New old stock in retail package. ...

Campagnolo Super Record #4032 TITANIUM Bottom Bracket: V1 112mm - 68-SS-120 - Alloy Cups (Near Mint)

This rare pre-1983 version 1 featured a hollow spindle and used standard crank bolts. It comes with the correct rifled alloy cups (which were the same on both V1 & V2).  The V1 spindle had problems breaking at the taper (ask Laurent Fignon)...

NOS Campagnolo Nuovo Record Pista High Flange Hubset: 36H - 1036/A - (Take Off)

This track hub set is part of the Nuovo Record gruppo, and was often issued with the Super Record gruppo.  True Super Record hubs ONLY difference is they have 6/4V titanium axles (made by O.M.A.S.), and are exceedingly scarce.  Includes...

NIB/NOS Sachs ARIS 7 Speed Freewheel: 13-26t - LY-99 Maillard

The genius of the SACHS-Maillard ARIS (Advanced Rider Indexed System) is that it is compatible with ALL 5/6/7/8 speed indexed shifters!  This includes Campagnolo Synchro, Shimano XT-M732, Shimano 600 SL-7400, Suntour Accushift, Mavic, etc.  It...

NOS Suntour XC Power Roller Cam Brakeset: CB-6100 - Plastic Rollers - Drilled

Somewhat rare first gen CB-6100 with plastic rollers and drillium arms.  These Cunningham designed brakes were all the rage in the early-mid 1980's!  These used different brake boss location than stock cantilever studs, make sure your...

NOS Gian Robert Downtube Shifters: Clamp Mount - Campagnolo Gran Sport/Record Clone

Gian Robert was one of many Italian companies in the 1960's, 1970's, and 1980's to produce components that were essentially clones of Campagnolo parts.  This one is clearly a clone of early Gran Sport & Record shifters.  Basic build...

Suntour GT RD-1200 Rear Derailleur: Long Cage - Touring (MINT+ Low Miles)

The Suntour GT from the 1970's was a super smooth shifting derailleur with capability to shift up to 34t cogs and 36t total capacity.  It wasn't sleek looking nor lightweight, but it sure did shift well.  Better than the mighty Cyclone GT...

Bontrager Select Seatpost: 31.6mm - Zero Setback - Late 1990's / 2000's - Two Bolt (EXC+)

Hard to find post that was stock equipment on mid to high level road/mountain bikes circa late 1990's to early 2000's.  Specifically Trek branded bikes, but it was available aftermarket/OEM and came stock on other brands too.  Zero setback, two...

NOS Ritchey Logic Comp 1 1/8" Threaded Headset: Black - 1990's (No Crown Race)

Somewhat tough to find headset from Ritchey's lineup in the early to mid 1990's.  This was just below the WCS headset, and above the Logic headset.  It would have been found stock on Ritchey P-22 and P-23 models among others...

FREAK UNTHREADED Campagnolo #743 Track Lockring: Collector's Item - Steel - <C> (NOS)

Talk about a weird rarity! This appears to be a Campy error part, a track lockring the factory forgot to thread!  Perhaps it was an error, or perhaps it was a lockring "blank" and it just never made it to the threading station in the workshop. ...

Manitou Long 5mm Wrench: M1 / M2 / M3 / EFC - For Bolt inside Legs (RARE)

This is the original super long 5mm allen wrench that came with the 1990's Manitou elastomer forks.  It inserts inside the fork legs and unscrews the bolt that the elastomers float on.   Condition Lightly used, not rounded

Manitou Two (M2) Fork: 1" Threaded - Fresh Rebuild? (Near Mint)

Released in 1993, the Manitou 2 was the first of the Answer-Manitou forks to gain this colorful and playful graphics, a stark diversion from the grey and black monochrome of the M1 and earlier Bradbury forks.   Condition Near mint cosmetics,...

Campagnolo Nuovo Record Brakeset: #2040 - Standard Reach - Nutted (Near Mint+ LOW MILES)

Standard reach and nutted Nuovo Record sidepull road brakes from the post CPSC era, 1978 to 1984+.  Domed qr levers, original adjusters.   Condition Near mint+ barely used, as clean as many "NOS take off" brakesets.  The one...

NOS SRP Titanium Shimano V-Brake Upgrade Kit: Deore/XT/XTR - Mounting Bolts/pad bolts/nuts/cable pinch/Spring Tension (Sold in Sets for One Brake)

Sleek ultralight upgrade kit for your Shimano Parallel Pull v-brakes. These were designed with the high end XTR BR-M950 / BR-M952, but will work with most other Shimano V-brakes and likely other brands.  To name a few, XT BR-M750, XT BR-M760,...

1963 Schwinn Stingray Knobby Tire: 20" x 2.125 Tire: S2 - Goodyear - Made in USA - Blackwall (NEAR MINT)

This Stingray Westwind Knobby tire made by Goodrich dates to the last quarter of 1963, making this among the very first Stingray tires ever made!  These were used on the Stingray through 1964. If you are restoring an early Stingray, you know how...

NIB/NOS Campagnolo Athena RS 7s Cassette Hubset & QR: 126mm - 32H - Rare

Rare 7 speed cassette hub from the Athena group!  This was issued in about 1991-1992 before 8 speed came out.  Freehub body is 7 speed pre-exa drive, with 8 equal width splines.  This will work with both pre-EXA 8s cassettes and current 8...

Campagnolo Grasso 10-N 500g Grease Tub: 3/4+ Full - 1980's C-Record Era - RARE!

This is arare 500 gram white jar of Campagnolo Grasso-10-N grease from the mid to late 1980's "C-Record era".  Even back in the day, this would have been so cost prohibitive that only pro bike shops that do a large quantity of Campy builds would...

Shimano FC-M730 Tandem Chainring: 38t x 110mm - Left Side (Mint, Barely Used)

Rare chainring for your 8 speed Deore XT tandem crank's left side. Condition Mint very lightly used shape. Dirt between teeth, no wear to note Details 38t BCD: 110mm

NOS Shimano FC-M730 Tandem Chainring: 38t x 110mm (Left Side)

Rare unused chainring for your 8 speed Deore XT tandem crank's left side. Condition New old stock Details 38t BCD: 110mm

Antique De Marchi Madison Track Shorts: Sz 4 - Wool - Quilted Rear - Jamming Tool - 1940's 1950's 1960's - Deerskin Chamois (Mint)

These are a preserved slice of track racing history!  These are called Madison shorts or 6-day shorts. They have a thick pad protruding from the left hip that was a "jamming tool" that your riding partner would grab to sling you forward to ride...

Milremo Special Course / Stronglight / Stronglight 45 Cottered Crankset: 170mm x 49/46t TA - 5 Pin 50.4mm Cyclotouriste - Chrome (Near Mint)

This crank was a Stronglight 45 5-pin, imported to Britain by Ron Kitching in the 1960's and rebranded as his house label Milremo.  The model is either Special Course 55 or the lighter Course 50.  This one is equipped with TA chainrings in a...

Cyclo Benelux Mark 7 Cable Operated Front Derailleur: Type Two (Near Mint)

This is the 2nd version of the cable lever operated MK-7 front derailleur that ran from 1957-1969.  It's cage has the oval logo just like the rod operated derailleurs of the 40's and 50's, where the 1st type had BENELUX spelled out across it. ...

Cyclo Benelux Super 60 Rear Derailleur: 1st Type (Near Mint+ Low Miles)

Introduced in 1960, the Super 60 was Cyclo-Benelux's attempt at competing with Campagnolo and it's Gran Sport + Record drivetrains.  It was the companies first dual parallelogram derailleur, and was designed to be a top level racing model.  The...

Shimano Dura Ace EX / AX Toe Straps: Blue Nylon (Near Mint)

These straps came with the Dura Ace EX PD-7200, Dura Ace AX PD-7300, Dura Ace PD-7400, and 600 EX / PD-6400. Condition Near mint very lightly used shape. No real wear, but some grease stains (likely from shop wear more than riding) Details Pair

Dura Ace EX PD-7200 + AX PD-7300 Dyna Drive Pedal LOT: 5 Pairs - Large Clips/Straps

Bulk lot consisting of five pairs of Dura Ace Dyna Drive pedals, complete with large/medium toe clips + cleats. Most of these are rideable, with the only issue being a few loose/tight bearings (can be adjusted). DD pedals feature oversized pedal...

Dura Ace AX PD-7300 Dyna Drive Pedals: Large Clips/Straps (Mint 50 Miles)

Complete and barely used example of the infamous Dura Ace Dyna Drive pedals complete with size large toe clips and mounting hardware.  This is the later 7300 AX version.  The main difference between these and the earlier pd-7200 EX version is...

NIB/NOS Shimano 600 / Dura Ace AX PD-7300 DD Pedal Rebuild Kit: Cones/Housing/Dust Covers/Seals (For Right and Left Pedals)

Completely unobtanium spare parts kit for the Shimano AX 600 PD-6300 and Dura Ace PD-7300 DynaDrive pedals. This kit includes the blue dust caps that go on the end of the threads, cones for both the 600 and DA (they're two different lengths), housings...

NIB/NOS Shimano Dura Ace EX HP-7200 Headset: FRENCH Thread

Super rare French threaded Dura Ace EX headset from 1978 - 1984.   Condition New old stock in retail box, pristine.  Details 1" Threaded French 25x1mm