Randonneur

Huret Jubilee Front Derailleur: 5-Hole - 28.6mm Clamp (EXC)

One of the lightest vintage front derailleurs out there, matched with some very angular lines that give it an almost industrial steampunk aesthetic.  Super smooth shifting! The four hole version was...

Regina CX/CX-S Freewheel: 6 Speed - 13-31t Wide Range MTB / Touring (MINT <100 Miles)

Rare extreme wide range version of the CX/CX-S, suitable for early mountain bikes, touring, or for a hill climbing still appropriate freewheel for your Italian L'Eroica bicycle. This was likely...

TA Pro 5 Vis Cyclotouriste Crankset: Capped Pedal Holes Early Version - 170mm x 54/44T Double - French (Near Mint+ Low Miles)

Very clean early version that features the closed pedal holes, with the little "cap" with a hole in it over the back sides.  The very earliest versions had different flutes and little engraved logos...

Ideale 2003 Randonneur Deluxe Suede Leather Saddle: 1980's - Black - PEAU + MOUSSE

The 2003 is one of Ideale's later saddles, in the 1980's. It is often called a randonneuse saddle.  On it's side logo is PEAU + MOUSSE which translates directly from French to Skin + Foam, referring...

A to B Magazine LOT: 1997's Issue #2 to #50 - UK Alternative Transport Rag - Folding Bikes - Brompton - Ebikes - Electric Cars - Bike Trailers...

Early lot of the British A to B Alternative Transport Magazine! This is the second issue ever circa 1997, all the way through the 50th issue circa 2005 (though issues 36 and 47 are missing, we added...

Simplex Competition Chainring: 51t - 6-Bolt - 1940's 1950's - Chrome (EXC)

Competition chainring from the 1940's and 1950's. These were used on a wide variety of brands, usually 3 pin cottered cranks using Simplex's adapter plates. Condition Excellent used condition...

Simplex Competition Chainring: 48t - 6-Bolt - 1940's 1950's - Chrome (EXC)

Competition chainring from the 1940's and 1950's. These were used on a wide variety of brands, usually 3 pin cottered cranks using Simplex's adapter plates. Condition Excellent used condition...

NOS Simplex Competition Chainring: 49t - 6-Bolt - 1940's 1950's - Chrome

Competition chainring from the 1940's and 1950's. These were used on a wide variety of brands, usually 3 pin cottered cranks using Simplex's adapter plates. Condition New old stock, minimal shop...

TA Pro 5 Vis Cyclotouriste Inner/Middle Chainring: 42t - REF 2082 (Near Mint Low Miles)

These are original 1960's, 1970's, and early 1980's first production rings for the T.A. Pro 5 Vis crankset.  They have a 6 bolt 80mm BCD, and also fit the Stronglight 49D, and Velo Orange Gran Cru...

TA Pro 5 Vis Cyclotouriste Inner/Middle Chainring: 46t - REF 2082 (Near Mint Low Miles)

These are original 1960's, 1970's, and early 1980's first production rings for the T.A. Pro 5 Vis crankset.  They have a 6 bolt 80mm BCD, and also fit the Stronglight 49D, and Velo Orange Gran Cru...

TA Pro 5 Vis Criterium Outer Chainring: 53t x 50.4mm - REF ch205 (EXC)

Criterium or "Course Legere" version of the Pro 5 Vis outer ring for high tooth count inner rings ideal for road racing and criteriums. These are original 1960's, 1970's, and early 1980's first...

TA Cyclotouriste Pro 5 Vis Outer Chainring: 52t x 50.4mm - REF cy205 (EXC)

These are original 1960's, 1970's, and early 1980's first production rings for the T.A. Pro 5 Vis crankset.  They have a 50.4mm BCD, and also fit the Stronglight 49D, and Velo Orange Gran Cru cranks...

Early TA Pro 5 Vis Ref 2175 Double Chainring Set: 175 Professional Adapter + 52t / 49t - 1940's 1950's (EXC)

This is a 1940's or 1950's Specialties T.A. road double chainring set, as identified from the presence of TA's old logo.  One of the logos is a small chainring shape, the other is stamped "cegedur...

TA Pro 3 Attaches Ref 2173 Double Chainring Set: 173 Professional Adapter + 52t / 45t (Near MINT Low Miles)

"Professional" adapter and chainring set for TA "Pro 3 Attaches" crank arm (or other 116mm 3 bolt crank) with a set of TA's 6 bolt "criterium" chainrings (Ref 204 & 206). Includes original chainring...

NOS Stronglight 49D 6 Bolt Adapter Chainring: 49t x 116mm BCD (take off)

Six bolt chainring for Stronglight 49 cranks which are using an adapter. Quite rare.  Condition New old stock, take off. No visible tooth wear, slight shop wear Details

Stronglight 49D Chainring Set w/ Hex Bolts: 52t / 40t - 50.2mm x 122mm

Double chainring set for Stronglight 49 / 49D chainrings, complete with original hex bolts.   Condition Great used shape. Details

Stronglight 104 Ter / 105 Ter Chainring: 56t x 122mm BCD - Black Ano - Drillium (Near Mint)

"Ter" version which was black anodized with factory drillium. 122mm ring from the 105 crank with it's spider handed down from the Stronglight 57 and 63 as well as the Stronglight 104 which changed to...

Stronglight 63 / 93 Inner Chainring: 49t x 122mm - 5 Bolt (Near Mint+ Barely Used or NOS Take Off?)

Replacement middle / inner ring from the legendary Stronglight 63 and later 93 cranks. This is an earlier ring, identified by the pointy teeth vs the later more rounded teeth. The rare Stronglight...

Stronglight 63 / 93 Inner Chainring: 45t x 122mm - 5 Bolt (Near Mint+ Barely Used or NOS Take Off?)

Replacement middle / inner ring from the legendary Stronglight 63 and later 93 cranks. This is an earlier ring, identified by the pointy teeth vs the later more rounded teeth. The rare Stronglight...

NIB/NOS Stronglight 104 / 105 Chainring: 42t x 122mm BCD

122mm ring from the 105 crank with it's spider handed down from the Stronglight 57 and 63 as well as the Stronglight 104 which changed to a clone of the Campagnolo Nuovo Record essentially...

NIB/NOS Stronglight 104 Bis / 105 Bis Chainring: 45t x 122mm BCD - Drillium

"Bis" factory drillium 122mm ring from the 105 crank with it's spider handed down from the Stronglight 57 and 63 as well as the Stronglight 104 which changed to a clone of the Campagnolo Nuovo Record...

Stronglight 99 Bis Chainring: 52t x 86mm BCD - Drillium (NOS Take Off)

This chainring has a bolt circle diameter of 86mm, and came stock on Stronglight 99, Stronglight 100, and Stronglight 80 cranksets.  It fits some SR triples as well. The Stronglight 99 was the...

Antique Seatpost Binder Bolt/Nut + Cable Hanger Stop: Steel

Very old cable hanger and binder bolt set, unknown origins.  Condition Average used shape with finish wear and light rust  

Bicycle Trouser Cuff Band: Italian Circa 1940's / 1950's - Steel

Rare mid century cuff to keep your pants out of your chain while riding. It appears in the 1950 Emille Bozzi cycling catalog (see images), and was likely made in the 1940's to 1950's. They became...

NOS Bicycle Trouser Cuff Band: Italian Circa 1940's / 1950's - Steel

Rare mid century cuff to keep your pants out of your chain while riding. It appears in the 1950 Emille Bozzi cycling catalog (see images), and was likely made in the 1940's to 1950's. They became...

A. Duprat Maxiplume Crank Arm: Driveside - 50.4mm - 170mm - Cottered - French 1930's 1940's 1950's - Chrome

Extremely rare orphaned drive side crank arm from Andre Duprat, circa pre-war and into the 1950's. Duprat is perhaps most known for their nickel plated hollow steel cranks that were nearly as light...

40's / 50's Atom 3 Speed Freewheel: 16-22t - French Threaded 34.7 mm x 1 mm - Black/Silver (Near Mint)

Early 3 speed freewheel from Atom, with recessed removal notches below the adjusting ring. Great for your randonneuse and technical trials bikes! Likely pre-war, maybe late 1940's or early 1950's...

40's / 50's Atom 3 Speed Freewheel: 16-22t - French Threaded 34.7 mm x 1 mm - Black/Gold (Near Mint)

Early 3 speed freewheel from Atom, with recessed removal notches below the adjusting ring. Great for your randonneuse and technical trials bikes! Likely pre-war, maybe late 1940's or early 1950's...

J. Moyne 3 Speed Freewheel: 14-22t - 1930's/1940's/1950's - French Threaded 34.7 mm x 1 mm

Rare and high end freewheel out of St. Etienne, possibly pre-war though these were made into the 50's. These freewheels and the elusive company are little more than legend in the bicycle world, as...

1940's Cyclo 4 Speed Freewheel: 16-22t - French Threaded 34.7 mm x 1 mm (Perfect Bearings)

Pre-war or maybe late 40's into very early 1950's 3 speed French threaded freewheel from Cyclo. Pretty hard to find. This uses the earlier style notch remover with the notches flush with the...

Atom 4 Speed Freewheel: 14-20t - Splined Remover - French Threaded 34.7 mm x 1 mm - Black/Gold

French Atom freewheel in 4 speed format, but with a splined remover. Condition Near mint lightly used shape. The finish is just barely wearing off the teeth suggesting quite low miles. Buttery...

Cyclo Gear Company Type B 4 Speed Freewheel: 15-23t - French Threaded 34.7 mm x 1 mm

French threaded freewheel from the English Cyclo Gear Company (later known as Cyclo Benelux), circa 1950's to 1960's.  Great for your road racing or randonneur bike! Condition Average used shape,...

Atom 5 Speed Freewheel: 14-21t - 1950s / 1960's - French Threaded 34.7 mm x 1 mm - Black/Gold

French Atom freewheel from sometime in the 1950's through the 1960's Condition Great used shape. Buttery smooth bearings.  Details

Atom 5 Speed Freewheel: 14-22t - 1950s / 1960's - French Threaded 34.7 mm x 1 mm - Black/Gold

French Atom freewheel from sometime in the 1950's through the 1960's Condition Average used shape. Bearings are a bit tight and could use an adjustment/grease Details <

Cyclo Competition 5 Speed Freewheel: 14-21t - French Threaded 34.7 mm x 1 mm - Black/Gold

French threaded freewheel from the French Cyclo, circa 1970's. This was the stock freewheel on many years of the Peugeot PX-10 & PY-10, and a great choice for other French road racing bicycles. other...

NOS Cyclo 5 Speed Freewheel: 13-19t - French Threaded 34.7 mm x 1 mm (1970's?)

French threaded freewheel from the French Cyclo, circa 1970's. Great for your Peugeot PX-10 or other road racing bike! Condition New old stock, no signs of mounting. Slight shop wear/dirt Details

Cyclo 72 5 Speed Freewheel: 15-23t - French Threaded 34.7 mm x 1 mm (Barely Used)

French threaded freewheel from the French Cyclo, circa 1970's. Great for your road racing or randonneur bike! Condition Near mint barely used shape. Spins buttery smooth, just the beginnings of...

Cyclo 72 5 Speed Freewheel: 14-24t - French Threaded 34.7 mm x 1 mm

French threaded freewheel from the French Cyclo, circa 1970's. Great for your road racing or randonneur bike! Condition Average used shape. Spins pretty smooth, but a bit loose and could use...

GB367 Pannier Set w/ Klickfix Fixtures + Rain Covers: Medium 33L- Black/Natural (Near Mint)

These are Berthoud's medium panniers which are actually quite large at 33 liters for the pair. They use the Klickfix mechanism to secure them to your rack. Includes two yellow Berthoud pannier rain...

NOS Campagnolo Gran Sport 3-Bolt Chainring Guard: 52t x 116mm - City / Cyclocross - RARE

Ultra rare Campy chainring guard for 116mm BCD 3-pin Gran Sport cranks! These are great both for cyclocross and for townie bikes to keep your skirt/pants out of the chain. The 3 bolt G.S. first...

Fluted Alloy Seatpost / Seat Pin: 26.4mm - 99g (Near Mint)

Lovely fluted seat pin that weighs sub 100 grams! This one measures 26.33mm with a digital caliper, making it a great candidate for those 1970's French frames that 26.2mm is a bit too small and a...

NOS Milremo Gran Sport Luxe Seatpost: 26.6mm - Fluted - Polished & Black - 2 Bolt - French Made

Rare and gorgeous seatpost that was distributed by Ron Kitching's British company Milremo, but was made in France (Perhaps by JPR or Spidel?). This is a two bolt model that kind of blurs the...

1940's-1970's Hub Axle Nuts & Locknuts LOT: Raleigh - Carlton - Misc French & Italian - 24 pcs

24 piece lot of track nuts, locknuts, etc. Two red Raleigh's, one Carlton, a bunch of random ones. Condition Varied used condition. See photos Details

Huret Touriste Léger Rear Derailleur: 1940's - Alloy Plates (EXC)

This rare rear derailleur out of France circa wartime to post-war 1943 to 1950.  It was designed around the materials Huret could source during the war, thus the piano wire. The pulley cage slides...

NOS Simplex #1146 Wing Nut For Double Shifters: Steel Plated Bronze - 1940's 1950's

Wingnut screw for 1930's, 1940's, and 1950's braze on shifters. These were found most often on the higher end models such as JUY and Tour De France, lower end models often had simple flat head screws...

Simplex #843 Wing Nut Screw For Single Shifters: Steel Plated Bronze - 1940's 1950's

Wingnut screw for 1930's, 1940's, and 1950's braze on shifters. These were found most often on the higher end models such as JUY and Tour De France, lower end models often had simple flat head screws...

Simplex Route Leger Monobloc Bell Crank Rear Derailleur + Shifter: 3V - 3/32" - 1930's 1940's French (EXC)

This derailleur was fairly similar to the Le Cyclo & Cyclo standard rear derailleurs, consisting largely of a cage with two pulleys, a bell crank, and a chainstay clamp. According to Velobase this...

NOS Le Lewis Rear Derailleur: Alloy - Chainstay Clamp - Two Large Pulleys - 1930's-1940's - Shifter - French - RARE

The Lewis rear derailleur was made in France circa 1934 into the late 1940's. The derailleur is primarily aluminum construction, particularly curious if it was available during the war! It's a pretty...