BARGAINS

Mavic 860 Front Derailleur: 28.6mm Clamp - Black (Low Miles)

The mid 1980's Mavic 860/862 derailleurs are the stuff of legend.  They work amazingly well, look great, and stand out from the crowd.  Highly sought after and fairly rare. Condition This one has very low miles and largely in wonderful shape,...

Sachs New Success Triple Front Derailleur: 31.6mm Clamp - Black (EXC+)

High quality MTB and touring front derailleur.  Condition Excellent or better lightly used shape. Slight wear to the black finish, light wear elsewhere. Details 31.6mm clamp Bottom pull for triple crank

Sachs New Success Front Derailleur: 28.6mm Clamp (EXC)

High quality front derailleur, with a nice chrome finish and blue decals. This came out with an 8 speed group, but it will work well with 6, 7, 8, and 9 speed drivetrains. Condition Excellent used shape.  Slight decal wear, pinpoint beginnings of...

TA Pro 5 Vis Cyclotouriste Crankset: Capped Pedal Holes Early Version - 170mm x 54/44T Double - French (Near Mint+ Low Miles)

Very clean early version that features the closed pedal holes, with the little "cap" with a hole in it over the back sides.  The very earliest versions had different flutes and little engraved logos near the dust caps, and these were after those...

Campagnolo 1st Gen C-Record / Cobalto Brake Levers: 1983-1985 (EXC)

These levers were issued with both the first generation C-Record group, and the Super Record Cobalto brakeset.  They were made from 1983 to 1986.  They are identifiable as 1st gen via the white hoods with ribbed top, the lack of a quick...

NIB/NOS Campagnolo Record Superleggeri #1038/A Pista Pedals: Black - Toe Clip Bolts - Track

Produced from 1971 to 1985, the Record Superleggeri (SL) pedals were between Nuovo Record and Super Record on the hierarchy.   The N/R pedals had silver steel cages.  The SL pedals had the lighter black anodized cages, but still the durable...

NIB/NOS Campagnolo Nuovo Record #1046/A Bottom Bracket: 114.5mm X 68mm English (Take off)

BB for 1977-1987 Nuovo Record Strada crankset, at 114.5mm long English threads.  Rifled thick cups.  The spindle is a world logo.   Condition New old stock, take off.  It was installed on a show bike, and then removed before...

1st Gen Campagnolo " No Record" Nuovo Record Strada High Flange REAR Hub: 36H x 126mm (EXC Perfect Bearings)

This is a first generation "Nuovo" Record rear hub! It was made from 1960 to 1963, and is just like the later and more common NR hubs, but lacks the word "RECORD" under the Campy "World" logo.  These are quite rare, and a must if you have an Italian...

NOS Zeus 2000 / Criterium Brake Lever Bodies: (Pair)

Replacement brake lever bodies from 2000 and Criterium levers.  Condition Likely new old stock with shop wear though these could have been used. Details Sold in pairs

NOS Zeus Criterium Brake Lever Blades & Pivots (Pair)

Replacement lever blades from Criterium levers.  Condition New old stock, light shop wear Details Sold in pairs

NOS Zeus Brake Parts LOT: New Racer / Criterium - Arms Springs Hardware...

Handful of spare arms and hardware from Zeus New Racer (and other) brakes. The top two brakes are complete minus pads and barrel adjusters Condition New old stock mostly. Details

NOS Rockshox Boxxer LEFT Fork Decal / Nameplate: ORIGINAL 2003-2004 (Non-Driveside Only, Sold Individually)

These are ORIGINAL Rockshox-produced hard stick-on logo plates that came on ~2003-2004 Boxxer DH forks.  Peel off the wax paper backing and stick them on your fork leg, and your Boxxer will look good as new! (well, they're not magic.  They...

1999 Della Santa Corsa Speciale Frameset: 54cm x 55cm - 130mm Spacing - Deda Zero - Black + Chrome (Near Mint, Crown Race Issue)

Portland cash pickup price $500 Roland Della Santa was one of the first American frame builders of the classic era, starting in 1970.  He gained his fame building for Greg Lemond from the time he was racing juniors.  This is a very late Corsa...

Chris King Inset 8 Headset: Black - 1 1/8" > 1 1/4" Tapered - 44mm (Perfect Bearings)

Built for the next generation of tapered road forks the Chris King InSet™ 8 is built to fit contemporary road and cross bikes that utilize 1-1/8” to 1-1/4”tapered steerer tubes and a 44mm headtube. Our InSet™ 8 combines our...

Campagnolo Athena D100 Rear Derailleur: 1988 to 1991 - 30t Max! - Carmichael Pulleys Red

This 1st generation Campagnolo Athena D100 rear mech is a short cage design that can shift up to a 30t large cog, thanks to it's unique multi-position chip that fits around the upper pivot bolt and adjusts derailleur angle.  It's aesthetics are...

Shimano Dura Ace PD-7401 Clipless Pedals: Grey (R: Low Miles Perf Bearings, L: Average)

First Dura Ace pedals circa mid 1980's, from the 7400 groupset.  These use Shimano or Look Delta cleats. Condition The right pedal is excellent or better with perfect bearings. The left is more worn and I'm throwing it in as a free bonus. These...

Selle Italia Flite Trans Am Gel Flow Saddle: Cutout -

Very popular saddle from Italian saddle maker Selle Italia, circa early 2000's. The "Trans Am" designator in the model name means there is a cutout. This was the first Flite saddle with a cutout. Condition Very good to great use shape.  Overall it...

Galfer Wave 180mm Disc Rotor: 6-Bolt (Very Low Miles)

Bargain price on a barely used six bolt rotor. Condition When I photographed these I thought it was a new take-off with hardly a sign of pads touching it, but in the pics they look slightly more used than that. Very low miles either...

Easton Havoc 35 Direct Mount Stem: 45mm / 50mm x 35mm - Black

Bargain priced bolt on / direct mount stem for 35mm bar clamp. Adjustable length Condition Average used shape with some cosmetic wear

BMX Parts Lot: 4 Pegs + Right Odyssey Brake Lever + Spank Grips + Title Gyro + Race Face Ride 31.6mm Seatpost

Bargain basement price on a pile of modern BMX parts Condition Average to great used shape, see pics. Sold AS-IS Details Seatpost: 31.6mm x 165mm

26" Fox 32 F-Series Fork: 80mm - 1 1/8" - Disc/V-Brake (Needs Rebuild)

Bargain on a 26" Fox F-Series XC fork that has been "Pushed" due to an issue where you compress the fork once and it feels great and the next push only moves a bit and feels like it has a lockout on. Compatible with both disc brakes and...

Shimano 105 PD-1056 Clipless Pedals: Look Delta Style - Grey

Early edition of Shimano 105 clipless pedals! These use Shimano/Look delta cleats. Condition Average to very good used shape. Smooth bearings but a bit dry. Some cosmetic wear Details No cleats Grey

NOS Two-Pin Dust Caps: Deeper Than Most - Chrome Plated Plastic

2-pin dust caps that look very similar to XT FC-M730 caps, but are a lot deeper front to back. Unsure who made these or why they're so deep. Condition New old stock! Slightest hints of shop wear microscratching Details Pair

NOS Two-Pin Dust Caps: Chrome Plated Plastic

2-pin dust caps that look very similar to XT FC-M730 caps. Condition New old stock! Slightest hints of shop wear microscratching Details Pair

Everest Nova 5 Speed Alloy Freewheel: 14-18t - Italian (2 Steel Cogs)

The Everest Nova alloy freewheel was often used on Campagnolo Nuovo/Super Record bikes before Campy produced their own freewheels in the 1980s.  These are quite rare in the US.  This one is a Nova Light Alloy model. True straight block corncob...

Regina ORO Freewheel: GOLD - 15t + 21t + 24t (Only 3 Cogs)

Partial Oro freewheel! This one only has 3 cogs High end restoration freewheel from Regina! This model was often stock spec on top level Campagnolo equipped road bikes, as for years Campy didn't have a freewheel readily available. Condition Excellent...

Ballistic Titanium Seatpost: 28.6mm x 150mm - For Display or Parts Only

Rare early 2000's titanium post that's tragically been cut too short to 150mm. Great for parts or display! Condition Cut to 150mm and should not be ridden unless you can have 4 inches of post inserted into your frame. Excellent cosmetic...

Campagnolo Spoke Protector: Plastic + Alloy Flange (EXC)

This cool plastic and aluminum dork disc is an ultralight model from the 70's and 80's.  It's fairly large, and will cover a 34t large cog for touring or mtb use. Condition Excellent lightly used condition, with some light surface scratches. ...

Campagnolo #1014 Nuovo/Super Record Downtube Shifters: Clamp On - Black Cable Stops - Flat Plates/Screws (Mint, NOS Take Off?)

Super clean clamp version of the NR/SR DT shifters of the 60's, 70's, and 80's.  These have the flat cover plates (part #603) and flat head screws, which were used up until the late 1970's. Condition These look like they could be new old stock...

Cinelli 1A Old Logo Quill Stem: 100mm x 26.4mm - Silver (worn)

Pre 1978 1A, with the old oval logo. Great choice for L'Eroica bikes  and any Italian classic road bike. Condition Fair shape. Lots of wear but still usable Details 100mm 26.4mm Silver

SPIKE Spank Race 2 Stem: 1 1/8" x 35mm x 31.8mm Clamp - Black (NEW)

Highly rated MTB stem! Condition New in box Details Length: 35mm Bar clamp: 31.8mm Stack: 35mm Weight: ~150g Burly 31.8 bar-clamp zone is chamfered to reduce stress risers and increase fatigue life in handlebars Iconic hourglass sectional...

Race Face Ride XC Seatpost: 31.6mm x 375mm - 0 Setback - Black (NEW)

Strong, attractive, reliable, and affordable post from RF in a harder to find 31.6mm size. Condition New in box Details Diameter: 31.6mm Length: 375mm Weight: ~295g MSRP: $35

FSA Vision Tri-Gel Road/TT/Tri Saddle: Black (New)

Supportive and sleek saddle for triathlon and time trial racing Condition New, no box Details Black

Stronglight 49 Cyclotourist Crankset: 170mm - French - 1950's 1960's Early Model - Alloy Dust Caps

The model 49 / 49D crank was introduced in 1949 and ran until the 80's with only minor changes.  This very clean example is an early model from the late 1950's or 1960's. It's identified as such via the lack of any words on the back of the crank...

NOS Campagnolo Nuovo/Super Record REAR QR Skewer: Curved Blade Post CPSC 1978-1987

Curved post-1978 version of the Campy NR/SR skewer, rear only Condition New old stock. Most of them are very close to pristine with just a touch of shop wear. They're all show worthy Details Rear only Chrome

NOS Mafac Rear Cable Hanger w/ Guide Pulley Wheel for Mixtie: Binder Bolt w/ Stop Pin (RARE)

This odd contraption is a seatpost bolt mounted cable stop that features a roller wheel to redirect the direction the cable travels.  It is made for mixtie frames where the cable is coming from the bottom making it's way up to the seatstay mounted...

Suntour Superbe Pro RD-5200 Rear Derailleur: Mid 1980's - Friction - Silver (Great)

This mid 1980's Superbe Pro rear derailleur is considered one of the best friction derailleurs ever!  It's super smooth and quiet, and reliable to no end.  Plus, it looks great!  It may not have the prestige of a Campy Super Record, but it...

Suntour Superbe Pro RD-5200 Rear Derailleur: Mid 1980's - Friction - Silver

This mid 1980's Superbe Pro rear derailleur is considered one of the best friction derailleurs ever!  It's super smooth and quiet, and reliable to no end.  Plus, it looks great!  It may not have the prestige of a Campy Super Record, but it...

NOS Wolber Super Champion Aspin Tubular Rim: SINGLE - 36H x 28" - Hard Ano Grey - Black Logo - Vintage 1980's 1990's

Very popular rim from made from very early 1980's to sometime in the 1990's.  These had a claimed weight of about 350g and were solid all around road racing wheels. Lightweight, but sturdy enough to build well and take a beating. This version is the...

NIB/NOS Wolber Super Champion Aspin Tubular Rims: PAIR - 36H x 28" - Hard Ano Grey - Black Logo - Vintage 1980's 1990's

Very popular rim from made from very early 1980's to sometime in the 1990's.  These had a claimed weight of about 350g and were solid all around road racing wheels. Lightweight, but sturdy enough to build well and take a beating. This version is the...

Campagnolo Nuovo Record BMX RIGHT Driveside Crank Arm: 806/BMX - Blue Ano - 175mm (Thread Weirdness)

Orphan drive side arm for your Campy BMX cranksets! These were released only in 1980 and 1981, maybe 1982.  This is for use with one 1/8" chainring Condition Note there is something odd going on with the pedal threads. There's a wide ring line...

Campagnolo #1014 Nuovo/Super Record Downtube Shifters: Clamp On - Black Cable Stops - Flat Plate s (Near Mint)

Super clean clamp version of the NR/SR DT shifters of the 60's, 70's, and 80's.  These have the flat cover plates (part #603) and flat head screws, which were used up until the late 1970's. Condition Near mint with low miles. Very slight wear,...

Handlebar End Plugs Lot: 1940s 1950's French / British - GEM - GB 30mm - Milremo - OGK - 6 Pc

Random lot of bar end plugs, mostly from the 1940's and 1950's. Condition Mixed condition. The GB is near mint though missing the "sleeve" portion. GEM is clean with a couple edge scuffs, OKG is near mint, one Milremo clean two dirty Details (1)...

French Wing Nuts Bulk LOT: 34pc - 8mm & 9.5mm - Huret Luxe / Sova / Torino / Etc

Big lot of 34 mostly French bicycle wingnuts!  Most are Huret luxe, Sova, and Torino but there are a few unmarked ones. Mix of front and rear. Mixed conditions. I'm not going to provide any other info on these, it's a bargain priced lot to grab...

Cinelli Mod #1 Road Quill Stem: FRENCH 22.0mm - 70mm x 25.4mm - 1950's 1960's (Rechromed Mint)

Gloriously rechromed 1950's or 1960's Cinelli #1 stem for French bikes with 22mm steerers! It's shorter than most at 7cm.  It has the engraved oval Cinelli Milano logo. The entire body of the stem along with the bar clamp bolt & nut have fresh...

Ritchey Logic WCS Saddle: Black Smooth Leather - Vintage 1992 - Selle Bassano

RARE titanium version of the early 1990's Ritchey Logic saddle, made by Selle Bassano. This was the stock saddle on the P-21 Team WCS and Project-20. The rails on the WCS version are shorter than the standard Logic Pro saddle for weight savings...

Ringle Ti Stix Rear QR Skewer: Silver - Ultralight Version of Holey (Cracked, Parts/Display Only)

Affordable Ti-Stix for your show bike or to steal parts off of! Note the crack on the lever blade. These were some of the hottest quick release skewers in the 1990's! Introduced in 1992 in their "Holey" MTB version only and then this "road" version in...

Girvin Components Fork Decal / Sticker: 1990's - 3.5" x 1" (RARE)

 Cool Girvin forks sticker from the 1990s Condition NOS, mint  Details 3.5" x 1" Black and red