Shifters

OMAS Alloy Clamp Bolt & Nut for Campagnolo Front Derailleur / Shifter / Cable Guide: 2g (EXC+)

Rare high end upgrade clamp bolt and nut from O.M.A.S. circa 1960's, 1970's, 1980's. This is made for Campagnolo Nuovo Record, Super Record, Gran Sport, etc front derailleurs, cable guides, and clamp...

Campagnolo #1014 Nuovo/Super Record Downtube Shifters: Clamp On - Black Cable Stops - Flat Plates/Screws (Mint, NOS Take Off?)

Super clean clamp version of the NR/SR DT shifters of the 60's, 70's, and 80's.  These have the flat cover plates (part #603) and flat head screws, which were used up until the late 1970's...

NOS Simplex #1146 Wing Nut For Double Shifters: Steel Plated Bronze - 1940's 1950's

Wingnut screw for 1930's, 1940's, and 1950's braze on shifters. These were found most often on the higher end models such as JUY and Tour De France, lower end models often had simple flat head screws...

Simplex #843 Wing Nut Screw For Single Shifters: Steel Plated Bronze - 1940's 1950's

Wingnut screw for 1930's, 1940's, and 1950's braze on shifters. These were found most often on the higher end models such as JUY and Tour De France, lower end models often had simple flat head screws...

Simplex Route Leger Monobloc Bell Crank Rear Derailleur + Shifter: 3V - 3/32" - 1930's 1940's French (EXC)

This derailleur was fairly similar to the Le Cyclo & Cyclo standard rear derailleurs, consisting largely of a cage with two pulleys, a bell crank, and a chainstay clamp. According to Velobase this...

Campagnolo Nuovo Gran Sport Downtube Shifters: #1014/1 - 1974-1983 - Twin Downtube Clamp - Knurled Nuts (EXC+)

In my opinion, these are the prettiest of all the vintage Campy shifters due to the gorgeous milled & domed end caps.  These were produced from 1974-1983. Lever blades are the same blades used on...

Campagnolo #1014 Nuovo/Super Record Downtube Shifters: Clamp On - Black Cable Stops - Flat Plate s (Near Mint)

Super clean clamp version of the NR/SR DT shifters of the 60's, 70's, and 80's.  These have the flat cover plates (part #603) and flat head screws, which were used up until the late 1970's...

NIB/NOS Campagnolo #1014 Nuovo/Super Record Downtube Shifters: Clamp On - No Cable Stops

Super clean clamp version of the NR/SR DT shifters of the 60's, 70's, and 80's. Condition New old stock, never installed.  No cable marks in slots, clamp band appears to have never been bent around...

NOS Campagnolo EC-RE113 Index Ratchet Ring: RIGHT 9 Speed Record & Chorus - Non-Recessed

OEM indexing shift disc for your early 9 speed Ergo shifter Condition New old stock Details Right/Rear

Campagnolo Chorus Carbon 10 Speed ErgoPower Shifters: Triple/Double - ErgoBrain Computer (MINT Low Miles)

Fresh ErgoPower shifters from the first 10 speed Chorus carbon gruppo, plus an Ergo-Brain computer.  Tough to find in triple! The Ergobrain is Campy's version of Shimano Flightdeck, but better! It...

Shimano Dura Ace Downtube Cable Stop Adjuster Lever: Right/Rear - SM-CT74 - Concave - Bolt (Sold Individually)

This adapter bolts onto your vintage bike's downtube braze on mounts, and act as cable stops for STI, Ergo, and bar end shifters.  Includes stainless steel mounting bolt. Condition New, no package

NIB/NOS Shimano Dura Ace Shifter Hardware Kit: Downtube Cable Stop Adapter Barrel Adjusters (SM-ST74) - BB Cable Guide (SM-SP17-M) - Ferrules

The adapters bolt onto your vintage bike's downtube shifter mounts, and act as cable stops for STI, Ergo, and bar end shifters.  This is the version with housings that are curved (concave) to fit...

NIB/NOS Shimano Ultegra ST-6500 / ST-6501 Name Plate Cover: RIGHT/REAR - Bracket - 9 Speed STI

Hard to find RIGHT SIDE OEM replacement nameplate / faceplate cover to fit both ST-6500 and ST-6501.  The plates are exactly the same for both models, the only difference being the 6501 now has the...

NOS Sachs Power Grip Extreme 7 Speed Grip-Shifters - 3x7 - Original Cables/housing (Take Off)

Almost fresh Sachs top level gripshifts! Black grip covers, original round profile, labeled "extreme" version. Cable housing is original Sachs logo. Condition New old stock, take offs.  Shifters...

Campagnolo Nuovo Record / GS Bar End Shifters: #1012/1013 - Blue Covers (EXC, Missing One Clamp Wedge)

1960's - 1980's Campy barcon shifters.  These have blue covers.  They were the only bar ends available in the era by Campy, so they came with any group that needed barcon shifters; Nuovo Record,...

NIB/NOS Shimano 105 ST-1055 STI Shifter Faceplate Cover: Front / Left

OEM replacement face plate for your early 1990's 105 STI shifter. Condition New old stock in package Details Front / left cover onl

Suntour Command Shifters: 7 or 8 Speed - SL-CD00 (Near Mint+ Low Miles)

Command shifters were Suntour's answer to STI and Ergopower shifters, and are often referred to as butterfly shifters.  They mount on drop road bike handlebars, usually to the inside of the brake...

NOS Simplex JUY 59 Rear Derailleur & Shifter: Riveted Badge - Plunger Push Rod Design - 1959 & 1960 - RARE

The JUY 59 was introduced in 1959 as an updated replacement for the JUY 51.  The overall profile is relatively similar, and the 59 has some significant upgrades.  First it did away with the...

NOS Huret Shifter Mount: Right - 28.6mm Downtube - Allvit / Svelto For Schwinn

This is a downtube mount clamp for a right shifter, Svelto and Allvit models (probably others).  This shifter was used heavily on Schwinn lightweights (Continental, Traveler, World...) and even...

Shimano XTR 980 SL-M980-A 2/3s Front/Left Trigger Shifter - I-Spec (MINT)

Front shifter from the 10 speed XTR group. It has a switch to change from double (2x10) and triple (3x10).  This one comes with the I-Spec mount to connect to Shimano disc brake levers. Can be...

NIB/NOS Suntour Mighty Rear Thumb Shifter: 5sp Ratchet - Stingray Fastback + 1982 Stumpjumper - Excelsior Klunker - Breezer - Lawwill Pro Cruiser...

This rare shifter from the 1970's into the early 1980's was first prominent on muscle bikes like the Schwinn Stingray Fastback and then klunker mountain bikes based off the pre-war Schwinn Excelsior...

Shimano Dura Ace Downtube Cable Right/Rear Stop: STI + Bar End Barrel Adjuster: SM-CT74 - FLAT - Bolt (Single, New)

This adapter bolts onto your vintage bike's downtube braze on mounts, and act as cable stops for STI, Ergo, and bar end shifters.  This is the version with housings that are flat, to fit your alloy...

LEFT Campagnolo Chorus Ergo Downtube Shifter Cable Barrel Adjuster / Adapter: Black - (NEW)

 Out of production and not available anywhere else in this black version!  These cable barrel adjusters bolt on to your frame's downtube shifter boss's, and allow the use of Ergopower, STI, or...

Huret Alvit Shift Lever Blade + REG 341 Covers Lot: 16ct - Long & Short

Lot of 16 Huret Alvit shifter lever blades from the 1970's and 1980's! Most of these are left levers, and there's one long right lever and two short right levers.  Great for art...