NOS VINTAGE

Stronglight 63 / 93 Inner Chainring: 49t x 122mm - 5 Bolt (Near Mint+ Barely Used or NOS Take Off?)

Replacement middle / inner ring from the legendary Stronglight 63 and later 93 cranks. This is an earlier ring, identified by the pointy teeth vs the later more rounded teeth. The rare Stronglight model 63 SC (Super Competition) was introduced in 1963...

Stronglight 63 / 93 Inner Chainring: 45t x 122mm - 5 Bolt (Near Mint+ Barely Used or NOS Take Off?)

Replacement middle / inner ring from the legendary Stronglight 63 and later 93 cranks. This is an earlier ring, identified by the pointy teeth vs the later more rounded teeth. The rare Stronglight model 63 SC (Super Competition) was introduced in 1963...

NIB/NOS Stronglight 104 / 105 Chainring: 42t x 122mm BCD

122mm ring from the 105 crank with it's spider handed down from the Stronglight 57 and 63 as well as the Stronglight 104 which changed to a clone of the Campagnolo Nuovo Record essentially.  Condition New old stock in package. Details BCD:...

NIB/NOS Stronglight 104 Bis / 105 Bis Chainring: 45t x 122mm BCD - Drillium

"Bis" factory drillium 122mm ring from the 105 crank with it's spider handed down from the Stronglight 57 and 63 as well as the Stronglight 104 which changed to a clone of the Campagnolo Nuovo Record essentially.  Condition New old stock in...

Stronglight 99 Bis Chainring: 52t x 86mm BCD - Drillium (NOS Take Off)

This chainring has a bolt circle diameter of 86mm, and came stock on Stronglight 99, Stronglight 100, and Stronglight 80 cranksets.  It fits some SR triples as well. The Stronglight 99 was the successor of the popular 49D crank. It has a smaller...

NOS Rockshox Boxxer LEFT Fork Decal / Nameplate: ORIGINAL 2003-2004 (Non-Driveside Only, Sold Individually)

These are ORIGINAL Rockshox-produced hard stick-on logo plates that came on ~2003-2004 Boxxer DH forks.  Peel off the wax paper backing and stick them on your fork leg, and your Boxxer will look good as new! (well, they're not magic.  They...

NIB/NOS Campagnolo Pawl / Spring Holder Tool: #7260223

One of the two tools needed to hold your pawls and springs in while installing on Campy freehub bodies.  This is needed for your C-Record and similar hubs. Condition New in package

NIB/NOS Campagnolo Pedal Toe Flip Kick Tabs & #767 Toe Clip Bolts (Pair)

Pair of toe clip bolts and pedal flips.  These attach to your Record SL or Gran Sport (and many other makes/models) pedals and allow you to flip the pedal over with your foot easier.   Condition New old stock in package, factory...

Campagnolo Super Record Brake Levers: #4062 - White Original Hoods (Mint LOW MILES

Drillium Super Record levers from their third generation circa 1984 to 1987. These are identified by their white hoods, no markings in lever pivots, and shield logo clamps. Condition These are so clean I almost thought they were NOS. They're mint with...

NIB/NOS Avocet 20 Cyclometer: Black - Mount & Transmitter Ring - Vintage 1980s 1st Gen!

The Avocet Model 20 was Avocet's first cyclometer released in 1985, and perhaps the first ever production digital cyclometer!. It was simple, reliable, attractive, and accurate.  .  This one's fresh, and includes the manuals, mount/wiring and...

NIB/NOS Suntour Superbe Pro Track Cog: HC-100 - 13t x 3/32"

The Suntour Superbe Pro HC-100 track cog is the premier cog choice for Japanese pista bikes (and most others excluding Campagnolo built bicycles).  Gorgeous flat black anodizing.  Great for fixed gear urban cyclists as well!  Inexpensive,...

NIB/NOS Cinelli Soft Ribbon Handlebar Tape: 3DV Purple! Vintage 1980's / 1990's

This is a rare set of Cinelli's Soft Ribbon from the 1980's to early 1990's. It's a slightly different texture than current Cinelli tape, and a different print. The color is a real good approximation of 3DV that Grafton and Ringle introduced in the late...

Ionic Billy / B2 Bomber 1x Crank Arms: CNC Machined Rarity! 172.5mm x 130mm - Black & Gold - 1990's/2000's (Near Mint++ LOW MILES)

Absurdly rare road/track/singlespeed anodized & CNC machined crankset from Ionic circa late 1990's or very early 2000's. Ionic was a very small framebuilder in Boise, Idaho most famous for their Ionic Johnny Rotten hardtail mtb and the mountain bike...

Chris King ISO MTB Front Hub: 32H x 6 Bolt Disc - Boost 110mm 20QR (New)

For riders who need the legendary smooth rolling quality of Chris King hubs for use in the high impact demands of enduro, DH, freeride, and slope-style we developed our ISO Large Diameter (LD) front hub. Built for gravity enthusiasts, our ISO LD front...

1980 Peugeot Bicycle Catalog / Brochure: CFX-10 / PY10CP Prestige / PFN10E / PXN10LE / PKN10E (MINT)

Rare brochure for high end Peugeot racing bikes! It is the first year for the top level professional CFX-10 Super Competition (sold as frameset only), and has specs for the rest of their line including PY10CP Prestige, PXN10E Super Competition, PKN10LE...

1979 Peugeot Bicycle Catalog / Brochure: PY10CP Prestige / PXN10LE / PKN10E (MINT)

Rare brochure for (mostly) high end Peugeot racing bikes! It focuses on the professional level PY10 Competition heavily, and has specs for the rest of their line including PX10 Super Competition, PKN10LE Competition and entry level UO10 Course. If you...

1976 Mavic Catalog / Brochure: RARE! Mavic's 1st ? (MINT)

This SCARCE folding leaflet style catalog may be Mavic's first ever catalog in the classic era! Velo-Pages attributes this one to 1976, and Disraeli Gears attributes another with a black and red rear of a bicycle over a white background to 1979 (though...

Campagnolo Record News Newsletter: Fall 1987

Campagnolo Record News magazine from fall of 1987. Condition Great used shape. Some light wear.   *U.S.A. Shipping costs can get complicated when combining magazines and components, or a large number of magazines/catalogs.  This is due to...

Campagnolo Record News Newsletter: Summer 1982 (MINT)

Campagnolo Record News magazine from summer of 1982. This one was mailed to Nike! Condition Mint collectors condition, no noticeable wear.   *U.S.A. Shipping costs can get complicated when combining magazines and components, or a large number of...

Campagnolo Olympic Catalog: 1982 - Collectors Quality & Rare! (MINT)

Old Campagnolo catalogs are both a great piece of memorabilia and an invaluable resource to identifying components and their respective gruppos.  This one is the famous Campy Olympic catalog. Consensus is this printed in 1982 to commemorate the 1984...

Campagnolo Gran Turismo Downtube Shifter: RARE! #1013/1b - Red Disc & Flange (MINT)

This is one of the most rare Campagnolo components of the classic era, circa very early 1970's! It's very seldomly seen in person or even in photos. Like it's MUCH more common sister in the Gran Turismo rear derailleur, it's a vast departure from...

NIB/NOS Campagnolo Veloce 10 Speed Front Derailleur: FD4-2C2X - 35mm/34.9mm - Silver - Double

The last series of classically styled silver front derailleurs to go with your silver Campy Record/Chorus/Athena/Veloce drivetrains. Condition New old stock in retail box.  Absolutely pristine.   Details Standard double 34.9mm clamp...

NIB/NOS Campagnolo C-Record Syncro II Downtube Shifters: 8 Speed

C-Record Syncro 2 rear shifter, with friction front shifter.  These come with a silver/grey insert, which indexes 8 speed drivetrains.  Includes original shift cables, manual, blue shifter retainer pieces. Condition True new old stock in...

NIB/NOS (Unica) Nitor Mod. 63 Seatpost: 27.2mm - Red Synthetic Friction Plates - 1960's / 1970's

The Nitor - Unica model 63 seatpost was released in 1963 and ran into the 70's.  It was a very expensive upgrade to the Campagnolo Nuovo Record 2-pin seatpost that was the gold standard of that era. These were only ever marked Nitor, which was...

NIB/NOS Weyless Hubset w/ QR Skewers: 36H - 1970's - Mirror Polish

Though these look like a product of the 1990's CNC era, these were actually made from 1974 to 1978 in the USA.  Great choice for Exxon Graftek, Teledyne Titan, Bruce Gordon, and other top shelf boutiquey USA made bikes of the era. They were designed...

NOS Shimano XT M780 Left / Front Shifter Base Cap

Replacement oem basecap for your front SL-M780 Condition New old stock Details Front 

NIB/NOS Shimano XT SL-M740 Gear Indicator: Front/Left - Screws

Did your XT M740 8 speed shifter have a busted or ugly gear indicator window?  This is a rare offering of a new replacement indicator plate with screws!  This was the best of the XT 8 speed shifters, and is worth restoring.  The M740 was...

NOS Two-Pin Dust Caps: Deeper Than Most - Chrome Plated Plastic

2-pin dust caps that look very similar to XT FC-M730 caps, but are a lot deeper front to back. Unsure who made these or why they're so deep. Condition New old stock! Slightest hints of shop wear microscratching Details Pair

NOS Campagnolo Nuovo Record Tandem Crank Arm: Captain Driveside - 170mm - #1051 (Take-Off)

Non driveside orphan arm for the classic NR tandem crankset. The "D" stands for right thread pedals (D and S stand for "Destra" and "Sinestra" in Italian) and this one being without a spider makes it the captain's driveside arm. The arm does not...

NOS Vitus 979 / 992 Seatstay Cap Ear / Slug: For Right or Left (Sold Individually)

OEM replacement seatstay caps for the legendary Vitus 979 and 992 bonded frames from the 1970's, 1980's, and 1990's! These were sometimes called ears, sometimes slugs.  They work for both right and left sides. if you need a pair, order two of these...

NOS Vitus 979 / 992 Seatstay Brake Bridge: "B"

OEM replacement seatstay bridge for the legendary Vitus 979 and 992 bonded frames from the 1970's, 1980's, and 1990's! Condition New old stock, slight shop wear Details Stamped: B

NOS Vitus 979 Non-Driveside Dropout: 58cm / 60cm

OEM replacement dropout for the legendary Vitus 979 bonded frames from the 1970's, 1980's, and 1990's! These likely fit other Vitus / Alan models as well as bikes marketed by other brands using Vitus frame parts. They had different dropouts for specific...

NOS Vitus 979 Non-Driveside Dropout: 55cm / 57cm

OEM replacement dropout for the legendary Vitus 979 bonded frames from the 1970's, 1980's, and 1990's! These likely fit other Vitus / Alan models as well as bikes marketed by other brands using Vitus frame parts. They had different dropouts for specific...

NOS Vitus 979 Non-Driveside Dropout: 52cm / 54cm

OEM replacement dropout for the legendary Vitus 979 bonded frames from the 1970's, 1980's, and 1990's! These likely fit other Vitus / Alan models as well as bikes marketed by other brands using Vitus frame parts. They had different dropouts for specific...

NIB/NOS Campagnolo Athena Syncro II Downtube Shifters: 7 Speed Indexed / Friction Front

Fresh set of Campy Athena Syncro 2 indexed DT shifters, complete with original cables. Condition True untouched new old stock in retail packaging, pristine. Details Rear: 7 speed Front: friction

NIB/NOS Shimano 600/Ultegra CS-6400 7s Uniglide Cassette: 12-19t

7 speed Uniglide hub for any Shimano Uniglide hub except Dura Ace (which requires a different lock ring cog size). Condition New old stock in retail box, slight shop wear Details 7sp 12-19t

NOS QBP Tooth Fairy Bash Guard: 104mm BCD x 44t Max (take-off)

This chainring guard is designed to fit on the outside of a triple chainring's big ring.  Yes, you can have three chainrings and a bash guard with this or just use it as a standard bash ring replacing your outer ring!  You will need longer than...

Ritchey Logic Cantilever Brake Pads: Threaded Post - Black All-Weather (Pair, NEW)

One of the most iconic canti pads from the 1990! Condition New old stock in package Details Black all conditions One pair (for one brake)

Ritchey Logic Cantilever Brake Pads: Threaded Post - Red Extreme Conditions (Pair, NEW)

One of the most iconic canti pads from the 1990! Condition New old stock in package Details Red extreme conditions One pair (for one brake)

Campagnolo Nuovo Record High Flange REAR Hub: FRENCH - 32H x 130mm - Flat Blade QR (Barely Used Near Mint+)

Bit of an odd duck of a NR hub, French freewheel threads with 130mm spacing. Perhaps you have a modern or spread frame you're building into a randonneur? Or you have a 120mm / 126mm to swap in? Comes with a flat blade pre-CPSC quick release skewer. High...

Salsa P10 DIRT DROP High Rise Quill Stem: 1" x 70mm x 26.0mm - 53 Degree - Black - Retro MTB (Near Mint)

The P7 (along with the 100mm P10) high rise stem is the iconic model that brought Jacquie Phelan and Charlie Cunningham's dirt drop craze (via the L.P. stem made famous on Jaquie's bike "Otto") to the mainstream.  Ross Shafer was the innovator, and...

NOS Campagnolo Record Braze-on Cable Guide: #663 (Sold Individually)

Budget classic road bike framebuilder supplies! Condition New old stock Details Sold individually #663

NOS Campagnolo Gran Sport 3-Bolt Chainring Guard: 52t x 116mm - City / Cyclocross - RARE

Ultra rare Campy chainring guard for 116mm BCD 3-pin Gran Sport cranks! These are great both for cyclocross and for townie bikes to keep your skirt/pants out of the chain. The 3 bolt G.S. first appeared in the 1971 Catalog #16 supplement, and last...

Campagnolo #1014 Nuovo/Super Record Downtube Shifters: Clamp On - Black Cable Stops - Flat Plates/Screws (Mint, NOS Take Off?)

Super clean clamp version of the NR/SR DT shifters of the 60's, 70's, and 80's.  These have the flat cover plates (part #603) and flat head screws, which were used up until the late 1970's. Condition These look like they could be new old stock...

Campagnolo C-Record / Croce D'Aune Powergrade Brake Levers (LOW MILES Near Mint++)

3rd/4th gen Corsa Record brake levers from 1987-1991.  These came with Delta brakes, and feature the Powergrade adjustment capabilities.  The Croce D'Aune and C-Record Powergrade levers are the same. The lever blades seem shinier than normal, I...

NOS Milremo Gran Sport Luxe Seatpost: 26.6mm - Fluted - Polished & Black - 2 Bolt - French Made

Rare and gorgeous seatpost that was distributed by Ron Kitching's British company Milremo, but was made in France (Perhaps by JPR or Spidel?). This is a two bolt model that kind of blurs the Campagnolo Nuovo/Super Record one bolt and two bolt styles. The...

NOS 1990's Velocity Aerohead Rims: 700c x 28H - Gold Anodized - Semi-Aero - RARE (PAIR)

Early version of the classically styled Aero-Head rims straight out of Australia! These are an early version based on the decal, and in rare gold ano. These would be wonderful for a 1990's to early 2000's road bike restoration or any bike that a pop of...

NOS Hi-E Asymmetrical Hi-Lo Rear Hub & QR Skewer: 32H x 130mm - Silver

Hi-E hubs were produced out of Tennessee from about 1972 into the early 1990's.  The rear high-low version is a rare one, Campagnolo & Phil Wood made similar hubs with high flange on one side and low flange on the opposite.  They were...