ERA

Campagnolo Nuovo Record Brake Levers: #2030 - 3rd Gen 1978-1984 - No Hoods

These are a 3rd gen 1978 to 1984+, identified via the hard anodized dark grey body and U-shaped cable hole.  Condition Average to very good used condition with scratches and scrapes but lots of life...

Cane Creek Helm Air MKII 27.5 Fork: 100mm (adjustable) Boost 15x110mm -Tapered (NEW)

The Helm Mark-II is an air-sprung trail/enduro fork with up to 170mm of travel (This one comes set at 100mm for dirt jump and rough XC applications), 35mm stanchions (same as a RockShox...

NIB/NOS Campagnolo Nuovo / Super Record Brake Pads: #2010 - Black (Set /4)

This is a vintage set of brake pad inserts for 1960's, 1970's and 1980's Campagnolo brakes.  They fit Super Record, Nuovo Record, Gran Sport, and Victory/Triomphe brakes.  Genuine original pads...

Campagnolo Victory Rear Brake (LOW MILES, MINT)

Why pay top dollar for NOS Super Record brakes for a bike that's not a prestigious show bike when you can get the same performance and damn near the same appearance for less than half the price?  The...

Campagnolo Super Record Rear Brake: #4061/1 V2 - NOS Pads (LOW MILES, Mint)

Show worthy example! The gold standard for brakes on 1980's Italian road bikes!  These are the 2nd version of the SR brakes, with the script logo and alloy tire guides.  Condition: Practically...

Campagnolo Nuovo Record Brakeset: #2040/1 - Short Reach - Recessed

Short reach Nuovo Record sidepull road brakes from the post CPSC era, 1978 to 1984+.  Domed qr levers, original adjusters.  You can discern short reach from standard reach NR brakes by noticing where...

Campagnolo Nuovo Record Brakeset: #2040/1 - Short Reach - Recessed (EXC+)

Short reach Nuovo Record sidepull road brakes from the post CPSC era, 1978 to 1984+.  Domed qr levers, original adjusters.  You can discern short reach from standard reach NR brakes by noticing where...

Campagnolo Nuovo Record Brakeset: #2040 - Nutted - Standard Reach - Flat QR Pre CPSC (Near Mint, worn pads)

Clean NR/SR brakes have gotten really tough to source!  This set is pre-1978 with flat quick release levers and nutted bolts. Standard reach Condition Near mint lightly used shape! Quite clean, some...

Campagnolo Nuovo Record Brakeset: #2040 - Nutted - Standard Reach - Flat QR Pre CPSC (Near Mint)

Clean NR/SR brakes have gotten really tough to source!  This set is pre-1978 with flat quick release levers and nutted bolts. Standard reach Condition Near mint lightly used shape! Quite clean, some...

Campagnolo Nuovo Triomphe Brake Levers: Tan Hoods - Polished (Low Miles, Scrapes)

Nuovo Triomphe levers are largely the same as 4th gen Nuovo Record, just with polished finish vs NR's silver anodized and Shield logo vs NR's delta logo.   Condition These are just barely used but...

NOS Campagnolo Nuovo Triomphe Brake Levers: NR Hard Ano Bodies - 1980's - Polished

Nuovo Triomphe levers are largely the same as 4th gen Nuovo Record, just with polished finish vs NR's silver anodized and Shield logo vs NR's delta logo.   Condition New old stock lever blades &...

NOS Campagnolo Nuovo Triomphe Brake Levers: NR Ano Bodies - 1980's - Polished

Nuovo Triomphe levers are largely the same as 4th gen Nuovo Record, just with polished finish vs NR's silver anodized and Shield logo vs NR's delta logo.   Condition New old stock lever blades &...

Campagnolo Victory Brake Levers: Drilled

These levers are the same as last generation Super Record 4062 levers with the exception of the logo on the face of the blades.  These Victory levers have the Campy Shield logo, where the Super...

Campagnolo Victory Brake Levers: Drilled (LOW MILES NEAR MINT++)

These levers are the same as last generation Super Record 4062 levers with the exception of the logo on the face of the blades.  These Victory levers have the Campy Shield logo, where the Super...

Campagnolo #4062 Super Record Brake Levers (EXC+ w/dead Hoods)

Drillium Super Record levers with their original brown/tan gum hoods (hoods are long past their useable days). Condition Levers are in excellent to near mint shape with light wear and faint face/end...

NOS Campagnolo Nuovo Record Brake Lever: #2030 - 4th Gen 1985-1987 - No Hood - #2030

Untouched set of NR levers!  These are a rare last generation version circa 1985-1987 made during the C-Record era as Campagnolo wanted to use up their supply of spares. They are identified easily...

1st Gen Campagnolo Nuovo Record Brake Levers: Round Hole - Long Reach - #2030 (EXC)

Rare set of early NR levers, quickly identified by the round hole on the back of the blades vs the later (and MUCH more common) lever's "U" shaped opening and unanodized bodies. The lever blade is...

1st Gen Campagnolo Nuovo Record Brake Levers: Gum Hoods - Round Hole - Long Reach - #2030 (EXC)

Rare set of early NR levers, quickly identified by the round hole on the back of the blades vs the later (and MUCH more common) lever's "U" shaped opening and unanodized bodies. The lever blade is...

Campagnolo Nuovo/Super Record Brev Chainring Bolts: #754 + #755 - Steel (Mint, set/5)

Clean set of vintage Campy chainring bolts.  These are appropriate for 1960's to 1990's Nuovo Record, Super Record, C-Record, Chorus, Gran Sport, Tripmphe/Victory, Croce D' Aune, Athena, etc cranks...

NOS Campagnolo Nuovo/Super Record Crank Arms: #1049/A: 170mm - Dust Caps - 1980s (Take-Off)

Fresh id 1980's NR/SR strada crank arms for your L'Eroica bike build or your backup fancy bike Condition New old stock take offs from a show bike with only a couple test rides. Exceptionally clean...

NOS Mafac Guidonnet City/Touring Brake Levers: White Plastic Blades

Unique French city, townie, or touring brake levers from the 1960s and 1970's.  They're designed for French riser city bars, moustache bars, or flat bars. Condition New old stock! Bodies/clamps are...

NOS Mafac Racer Centerpull Brakeset: (1) Straddle Cable - Long Reach

Fresh set of Mafac Racer centerpull brakes from the 1970s and 1980s.  Condition New old stock, never installed. Some light shop wear. Note one caliper's straddle cable & anchor are missing.

NOS Mafac Racer Centerpull Brakeset: Straddle Cables - Long Reach

Fresh set of Mafac Racer centerpull brakes from the 1970s and 1980s.  Condition New old stock, never installed. Some light shop wear. Details

NOS Mafac Racer Centerpull Brakeset: Polished - Straddle Cables

Fresh set of Mafac Racer centerpull brakes from the 1970s and 1980s. These arms have been polished, and one of the caliper's pivot & stationary straddle cable anchor are polished too.  Condition New...

NIB/NOS Cyclo Pans Freewheel Kit: 6 Speed 13-24t FW + 10 Cogs / Pawls / Springs / Tool / Oil

This is a 1980's freewheel kit from Cyclo.  It comes with a ready to ride 5 speed 14-21t freewheel, as well as 10 loose cogs (up to 24t) to customize your gear ratio.  It includes pawls, springs, and...

Regina Extra America 6 Speed Freewheel: 14-23t (LOW Miles Near Mint+)

The Extra America was Regina's top of the line freewheel in the 1980's and early 1990's, and is a perennial favorite among cyclists of all flavors.  These were paired with Campagnolo friction gruppos...

NOS Benotto Professional Cello Bar Tape: Ivory White - Smooth - Vintage 1970's 1980's

An old favorite for vintage road bikes!  This tape is thin, flexible, and does not get dirty!  Hard to find creamy ivory white color.  Benotto tape was introduced in about 1975 and ran through the...

NOS Campagnolo #622 Steel Coil Derailleur Housing w/ Ferrules (One Step-Down): 235mm

The vast majority of high quality road bicycles from the 1950's through 1970's (especially Italian bikes) used a stainless steel "spring" type housing loop for the rear shift cable housing. Exactly...

Kingsbridge Fixed Cup Tool: Universal Bottom Bracket Cup Remover - Works on Cups w/ Damaged Wrench Flats (RARE)

This is a very tough to find old shop tool used to remove stubborn or broken bottom bracket cups.  It works with practically all cup and cone square taper BB cups, as it is friction based and doesn't...

VAR 30 Bottom Bracket Fixed Cup Remover Tool: No Jaws

VAR's legendary French tool for removing the fixed cup of your bottom bracket. This one is known for not leaving marks on the cup, while making removal a cinch.  It is pretty tough to find, and...

Specialties TA REF. 24 Chainring Bolt Tool: 8mm T-Wrench For Hex Nuts (RARE!)

Excessively rare and useful key specifically for the older style domed Specialties T.A. chainring bolts (as well as other 8mm French chainring bolts). The special bit here is the wrench's opening is...

FSA BB30 EE039 Bottom Bracket PF30 Threaded Adapter Extractor: 73mm (Lightly Used)

This tool helps remove stubborn threaded adaptors for BB30 shells. Condition Lightly used shape, no damage Details Part numbers: 800-0010, E3122, E0039 MSRP: $40

Derailleur Alignment Gauge DAG: Campagnolo R Tool Clone

This is essentially a Campy "R" DAG tool without the Campagnolo branding and slightly different finishing touches. The handle is more crude but pretty closely designed to the Campy. Best guess is...

NIB/NOS Wheelsmith Tensiometer Spoke Tension Gauge + Calibration Chart

The most trusted spoke tension meter ever made! Includes recalibration chart. These have gotten pretty hard to find. Condition New old stock with manual, calibration chart, and foam. Actual box not...

Hayes Feel'R Gauge: Easily Centers Disc Brake Pads (NEW)

Affordable yet indispensible tool that makes centering your rotor between your pads a cinch. This is the best one I've found for this purpose. Condition New Details Purple MSRP: $24

Campagnolo Over-Torque Assembly / Disassembly Tool: UT-FC130 + UT-FC220 (Lightly Used)

Rare & expensive installation and disassembly tools for Campagnolo Over-Torque cranks. Campy may have outdone themselves with the over-complexity in of installing a simple crankset, but if you have...

Campagnolo UT-CN400 Chain Breaker Tool: 12/13 Speed (Lightly Used)

Shop quality tool for working with Campy 12 speed and 13 speed chains. Condition Near mint lightly used shape. Comes in retail box with manual. Details MSRP: $260

Campagnolo UT-CN300 Chain Breaker Tool: 11/12 Speed (Lightly Used)

Shop quality tool for working with Campy 11 speed and 12 speed chains. Condition Near mint lightly used shape. Comes in retail box with manual. Details MSRP: $260

Hi-E Front Hub & QR Skewer: Low Flange - 24H Bladed - Silver - Engraved Logo (Near Mint Perfect Bearings)

Rare quick release skewer with a low flange hub that has keyhole spoke holes for fully bladed spokes. Hi-E hubs were produced out of Tennessee from about 1972 into the early 1990's.  They were an...

Brooks 1930's Leather Toe Straps: Black - Vintage-Look / Modern Production (LOW Miles Near Mint+)

Brooks issued these in recent-ish years as a reproduction of the toe straps they made in the 1930's. They have that "antique" look with the shape of the buckles. These are discontinued and somewhat...

Sachs-Huret Jubilee Rear Derailleur: Short Cage - Drilled - 1980s (Near Mint)

This is the final version of the Jubilee RD circa ~1985! Sachs acquired Huret in 1980 but the rebadge didn't happen until around 1985. It remained largely the same as the Huret drillium version but...

Huret Jubilee Rear Derailleur: Short Cage - Non-Drilled (LOW MILES Near Mint+)

The Huret Jubilee was designed as the ultimate derailleur, to commemorate the French company's 50th anniversary.  It featured a drilled cage, adjustable ball bearing jockey wheels, and tiny hardware...

Mavic 851 SSC Rear Derailleur: RARE Vintage 1980's Pro Version of 801 RD (EXC)

This mid 1980's derailleur was the peak of Mavic's rear mech technology in the SSC era.  It was the professional version of the similar 801 derailleur, the main differences being the 851's needle...

DT Swiss Conversion End Cap LOT of 29: 12x142 / 12x135 / 15mm-20mm to QR / Classic Road QR / etc

Big lot of 29 axle end caps for DT Swiss hubs! Great for repair shops. Priced at about $5 per cap. Condition Varied used condition but largely excellent shape! I haven't cleaned these at all...

DT Swiss Freehub Body Lot: 11s Road / Ratchet EXP & LN / Campagnolo / 10s HG (14 Bodies Plus Extras!

Big lot of 14 DT Swiss freehub bodies plus some extras! Great for repair shops! This is priced at $14 per freehub and the extras are freebees. Condition Varied used condition but largely excellent...

DT Swiss Campagnolo Body: Alloy (New)

The DT Swiss aluminum freehub compatible with 9/10/11/12 speed Campagnolo drive systems. Includes quick release end cap Condition New Details

DT Swiss 11s Road Freehub Body: Shimano HG 11 / 12s - Alloy (New Take-Off)

This DT Swiss free hub body converts your existing 180, 190, 240, or 350 hub to be compatible with the new Shimano 11-speed groups. Includes end cap for 142mm thru axle. Condition New, removed from...

Specialized Roval/DT Swiss Ratchet Freehub Body: 11s Road HG (NEW Take Off)

Replacement freehub body and 142mm thru axle end cap for many Roval wheels (and maybe others?). This one is officially called red but its more orange. Condition New, removed from new bike when...