Touring / Bikepacking

Campagnolo Chorus 10sp Carbon / Alloy Rear Derailleur: Short Cage - 1st Gen (50 Miles MINT)

This is the first gen of Chorus 10s RD circa ~2004 with a carbon faceplate and alloy cage (2nd gen has carbon cage & ti hardware plus "Titanium" on face under Chorus). This version still looks nice on classic steel road bikes—the later carbon...

Salsa P10 DIRT DROP High Rise Quill Stem: 1" x 70mm x 26.0mm - 53 Degree - Black - Retro MTB (Near Mint)

The P7 (along with the 100mm P10) high rise stem is the iconic model that brought Jacquie Phelan and Charlie Cunningham's dirt drop craze (via the L.P. stem made famous on Jaquie's bike "Otto") to the mainstream.  Ross Shafer was the innovator, and...

NOS Campagnolo Gran Sport 3-Bolt Chainring Guard: 52t x 116mm - City / Cyclocross - RARE

Ultra rare Campy chainring guard for 116mm BCD 3-pin Gran Sport cranks! These are great both for cyclocross and for townie bikes to keep your skirt/pants out of the chain. The 3 bolt G.S. first appeared in the 1971 Catalog #16 supplement, and last...

Vintage Touring Saddle Bag: Large - Vinyl / Faux Leather (Near Mint)

Vintage faux leather saddlebag, intended for touring. Large size. It is very similar to the Schwinn Approved touring bag Condition Near mint lightly used shape. Vinyl is very clean with no significant wear to note. Straps in great...

Universal Sport Centerpull Brakeset: 1960's 1970's - Long Reach 56/72mm (EXC)

The Sport was a less expensive version of the Universal 61. The springs were different being wrapped under the caliper arms, whereas the Mod.61 springs have short ends on the tops pinned into holes bored into the pivot post bracket...

Stronglight 49 Cyclotourist Crankset: 170mm - French - 1950's 1960's Early Model - Alloy Dust Caps

The model 49 / 49D crank was introduced in 1949 and ran until the 80's with only minor changes.  This very clean example is an early model from the late 1950's or 1960's. It's identified as such via the lack of any words on the back of the crank...

NOS Mafac Rear Cable Hanger w/ Guide Pulley Wheel for Mixtie: Binder Bolt w/ Stop Pin (RARE)

This odd contraption is a seatpost bolt mounted cable stop that features a roller wheel to redirect the direction the cable travels.  It is made for mixtie frames where the cable is coming from the bottom making it's way up to the seatstay mounted...

NOS Campagnolo Racing T Triple Inner Chainring: 30t x 74mm - 8/9 Speed

30t granny / inner ring from the 1980's to early 1990's Racing T triple crank Condition New old stock Details 30t x 74mm

NOS Velox Bottle Generator Cap

These little rubber caps go over the head of a generator bottle generator to help quiet down noise and smooth the action. Long out of production and hard to find. Condition New old stock, some of that tackiness that comes with age  

Campagnolo Nuovo Record / GS Bar End Shifters: #1012/1013 - Blue Covers (EXC, Missing One Clamp Wedge)

1960's - 1980's Campy barcon shifters.  These have blue covers.  They were the only bar ends available in the era by Campy, so they came with any group that needed barcon shifters; Nuovo Record, Super Record, Gran Sport, Triomphe, Valentino.....

NIB/NOS Silca Impero Frame Pump & Head: 45.5cm Full / 32.5cm Body - Black

Fresh Silca Impero with head in black. Short ones like these are great for chainstay mounting randonneur style. Condition New old stock in retail packaging!  Hardly any shop wear.  The last one purchased does not have a...

NIB/NOS Minoura Mira Alloy Toe Clips: Gold Small (Sold in Pairs)

Lightweight Japanese toe clips from the 1980's and early 1990's Condition New old stock in retail packaging, with mounting hardware Details Size: Small Gold Aluminum

NOS Christophe D 496 Toe Clips: Small- Chrome (Sold in Pairs)

Christophe "D" clips are just a size designation to their standard 496 toe clip.  The horizontal logo was placed on the size small clips because there wasn't room for the vertical logos, just like the "Special" designation was only used on Large /...

NOS Drillium Toe Clips: Large - Super Sport Italy-Superlight 56g/pair - Chrome (Sold in Pairs)

Tired of the same old Christophe/Zefal/MKS/Campagnolo clips? Get something truly unique! I have not found any information on these clips, labeled Super Sport Italy.  They are factory drilled on the uprights, through the toe strap loop, and the...

NOS Milremo Campionissimo Christophe Toe Clips: Medium - Chrome (Sold in Pairs)

Are you tired of the same Christophe, Zefal, and Campagnolo toe clips EVERYONE is riding? These are Christophe 496 toe clips rebranded for British importer/distributor Milremo, and they're your inexpensive way to be different on your next L'Eroica ride...

NIB/NOS Shimano 600 1st Gen 3 Bolt Chainring for GC-100: 52t

Rare 3 bolt chainring from the 1st generation Shimano 600 GC-100 crankset which ran from 1975-1977 Condition New old stock in retail package Details 52 tooth Silver

NOS MAFAC Course / 2000 Brake Levers w/ 1 Brown Full Hood

This set of Mafac levers comes with one pristine full hood in brown with barrel adjuster and barrel adjuster cover! Racing levers to fit both half hoods (Course model) and full hoods (2000 model).  The model of these is determined by the hood and...

NIB/NOS MAFAC Racing Brake Levers: Twin Cable Tandem + Standard - For Half or Full Hood (Pair)

This is a lever set consisting of one twin cable lever and one standard single cable lever.  The twin cable lever is designed to control two brakes from one lever, and was marketed to tandem bikes (particularly when running both a drum brake and rim...

NIB/NOS MAFAC Course / 2000 Brake Levers: For Half or Full Hood (Pair)

Racing levers to fit both half hoods (Course model) and full hoods (2000 model).  The model of these is determined by the hood and the barrel adjuster.   Condition: New old stock in oem bag with model tag.  Pristine. First set...

Stronglight 63 SC Super Competition Crankset: 170mm x 52/45t - French (NEAR MINT+)

The rare Stronglight model 63 SC (Super Competition) was introduced in 1963 as an update to the 57 SC, their top of the line racing model. It's arm profile and double taper is similar to the 49D, but the SC line uses a star shaped 122mm integrated spider...

Suntour GT RD-1200 Rear Derailleur: Long Cage - Touring (MINT+ Low Miles)

The Suntour GT from the 1970's was a super smooth shifting derailleur with capability to shift up to 34t cogs and 36t total capacity.  It wasn't sleek looking nor lightweight, but it sure did shift well.  Better than the mighty Cyclone GT...

NOS Silca Impero Pump Sleeve: Silver

OEM replacement sleeve that fits under your Silca Impero's pump head.  Fits all Impero frame pumps and likely some other pumps. Condition New old stock, some have very minor shop wear Details Silver/chrome

NIB/NOS Campagnolo Centaur CT Compact Triple 10 Speed Front Derailleur: Braze On - FD5-CE2BCT - Silver

Rare compact  version of the 9/10s Campy front mech.  Centaur sits right below Chorus in Campy's hierarchy and retains the alloy silver classic look after Chorus and Record went to carbon. Condition New old stock in original retail box...

Frank Spivey(?) Long Cage For Campagnolo Nuovo Record: Drillium - Bullseye Pulleys - 123mm c-c - Cupertino/Spence Wolf (Near Mint+)

This custom extra long cage quite likely came out of Frank Spivey's workshop, alongside the better known yet ultra rare Spence Wolf Alpine.  This one is even longer, at 123mm center to center on the pulley bolts!  The cage consists of two...

Silca Impero Frame Pump: 1st Gen Flat Top - 1960's - Black - 46cm Body for 51cm to 53.5cm Frame (Near Mint+)

Super rare early version of the legendary Silca Impero, identified by it's motorcycle grip shaped handle with a rounded end. It was designed for use with a pump peg or umbrella clip, where as the later more common sleek cylinder handles had a cradle at...

Giant 700 x 28-32 (27" x 1 1/8"-1 1/4") SV Schrader Tube: 35mm Valve (Bulk Discounts)

Need to stock up on tubes for your hybrids, commuter bikes, or older 27 inch tubes?  Giant's tubes are among the nicer ones out there, and worth their $9 MSRP if you have the means.   Be sure to check out the bulk discounts right above...

Honjo H79 Sliding Bracket: For 58mm Turtle (NEW)

This sliding bracket is used to mount the rear fenders on bikes where the seatstay bridge is not drilled at the bottom for direct fender mounting.  This one is for 58mm wide fenders to fit 650b x 42 tires or 26" rat trap pass tires.  Fits...

Specialties T.A. Chainring Guard: 6-Bolt Professional/Criterium - For 48T (Near Mint)

Rare outer chainring guard plate for T.A. Cyclotouriste, Criterium, and Professional chainrings with a 6 bolt 152mm drilling.  These were originally intended for cyclocross, but are great for townies, touring, etc. HERE is a set of bolts/spacers to...

NOS DIA-COMPE Bakelite Caliper Brake Bolt Caps (Pair): Dark Grey - BMX Nippon/MX - Threaded

These caps thread onto the back of the caliper mount bolt, outside of the nut.  They essentially cover the section of exposed threads outside of the nut.  They work for ALL nutted caliper and centerpull brakes that have a bit of thread outside...

Set of 6 NOS DIA-COMPE Bakelite Caliper Brake Bolt Caps: Dark Grey - BMX Nippon/MX - Threaded

These caps thread onto the back of the caliper mount bolt, outside of the nut.  They essentially cover the section of exposed threads outside of the nut.  They work for ALL nutted caliper and centerpull brakes that have a bit of thread outside...

NOS DIA-COMPE Bakelite Caliper Brake Bolt Caps (Pair): "D-C" - BMX Nippon/MX - Threaded

These caps thread onto the back of the caliper mount bolt, outside of the nut.  They essentially cover the section of exposed threads outside of the nut.  They work for ALL nutted caliper and centerpull brakes that have a bit of thread outside...

Set of 6 NOS DIA-COMPE Bakelite Caliper Brake Bolt Caps: "D-C" - BMX Nippon/MX - Threaded

These caps thread onto the back of the caliper mount bolt, outside of the nut.  They essentially cover the section of exposed threads outside of the nut.  They work for ALL nutted caliper and centerpull brakes that have a bit of thread outside...