Recently Reduced Prices

NOS Shimano XTR FD-M950 Front Derailleur: 28.6mm - Top Swing/Low Clamp (Slight Shop Wear)

Top shelf front mech for 8 and 9 speed drivetrains. Condition New old stock with slight shop wear Details Clamp: 28.6mm Top pull Top swing

NOS Scott Mathauser Superbrake Pad Inserts: Size "S" for Finned Holders (Sold in Pairs)

Set of four brake shoes, in size "S" to fit Mathauser finned Superbrake pad holders.   Condition New old stock. Pads are supple and not at all drying. Details Sold in pairs (for a whole bike front and rear, order quantity two) Salmon 

NOS/NIB Benotto Professional Cello Bar Tape: Dark Blue - Smooth - End Caps - Vintage 1970's 1980's

An old favorite for vintage road bikes!  This tape is thin, flexible, and does not get dirty! Benotto tape was introduced in about 1975 and ran through the mid 1980's and is a top choice for classic road bikes and L'Eroica rides.  This dark...

NOS Two-Pin Dust Caps: Deeper Than Most - Chrome Plated Plastic

2-pin dust caps that look very similar to XT FC-M730 caps, but are a lot deeper front to back. Unsure who made these or why they're so deep. Condition New old stock! Slightest hints of shop wear microscratching Details Pair

NOS Two-Pin Dust Caps: Chrome Plated Plastic

2-pin dust caps that look very similar to XT FC-M730 caps. Condition New old stock! Slightest hints of shop wear microscratching Details Pair

NOS Shimano XT FC-M730 / FC-M730 Dust Caps: 2 Pin - Chrome Plated Plastic

Clean caps for your 1980's Shimano XT cranks! These cosmetically look the same as XTR FC-M900 1st gen cranks, and look great on Dura Ace 7400/7402 cranks, as they use the two-pin style too. Condition New old stock! Slightest hints of shop wear...

Campagnolo Spoke Protector: Plastic + Alloy Flange (EXC)

This cool plastic and aluminum dork disc is an ultralight model from the 70's and 80's.  It's fairly large, and will cover a 34t large cog for touring or mtb use. Condition Excellent lightly used condition, with some light surface scratches. ...

Campagnolo #1014 Nuovo/Super Record Downtube Shifters: Clamp On - Black Cable Stops - Flat Plates/Screws (Mint, NOS Take Off?)

Super clean clamp version of the NR/SR DT shifters of the 60's, 70's, and 80's.  These have the flat cover plates (part #603) and flat head screws, which were used up until the late 1970's. Condition These look like they could be new old stock...

NOS Campagnolo Nuovo/Super Record REAR QR Skewer: Curved Blade Post CPSC 1978-1987

Curved post-1978 version of the Campy NR/SR skewer, rear only Condition New old stock. Most of them are very close to pristine with just a touch of shop wear. They're all show worthy Details Rear only Chrome

NOS Mafac Rear Cable Hanger w/ Guide Pulley Wheel for Mixtie: Binder Bolt w/ Stop Pin (RARE)

This odd contraption is a seatpost bolt mounted cable stop that features a roller wheel to redirect the direction the cable travels.  It is made for mixtie frames where the cable is coming from the bottom making it's way up to the seatstay mounted...

Campagnolo #1014 Nuovo/Super Record Downtube Shifters: Clamp On - Black Cable Stops - Flat Plate s (Near Mint)

Super clean clamp version of the NR/SR DT shifters of the 60's, 70's, and 80's.  These have the flat cover plates (part #603) and flat head screws, which were used up until the late 1970's. Condition Near mint with low miles. Very slight wear,...

3DV PURPLE Paul Klamper Mechanical Disc Brake: Long Pull for MTB Levers - IS/Post (NEW)

Radical limited edition 3D Violet anodized set of Paul Components Klamper disc brakes! This color matches perfect to retro 1990's ano components in 3DV purple.  These are the long pull version, designed for use with v-brake levers or cyclocross...

Chris King ISO MTB Hubset: 2012 Plum Purple! 32H x 8/9/10sp - 6 Bolt Disc - Boost 110mm 20QR x 135mm QR (NEW)

Rare limited edition purple Chris King ISO disc mountain bike hubs! This was THE hub to have in the 2000's as disc brakes took over the mtb scene. They were CK's second disc mtb hub, introduced in 2001. The first was the Disc-Go-Tech hubs which featured...

Chris King 1 1/8" NoThreadSet: Dark Plum Purple 2012 - Bold (NEW)

Nothreadset in the RARE 2012 limited edition dark purple color! Chris King originally made a VERY limited run of this purple for Independent Fabrication early/mid 2012, and then expanded to be a limited color for the rest of 2012 only.  This is NOT...

Schwalbe Nobby Nic EVO 26 x 2.35" Folding Tire: SnakeSkin - TLE - Addix Speedgrip (New take-off)

Schwalbe's top level Evolution line tires in 26" size!   From the manufacturer The all-rounder that works in every situation, no matter the weather, no matter the terrain. Widest possible range of use: for tour and all-mountain, for...

NOS SIMPLEX Demultiplicator + Cable Stop: #2343 - 1st Type 1960's Early 1970's

Rare first generation of the Simplex Demultiplicator, model #2343.  This one is all metal, with the old Simplex "S" logo engraved lightly on the band.  The 70's version of this was similar but had the bolder Simplex star logo, and #3637-L...

NOS Benotto Rubber Handlebar End Caps: Green (Pair, MINT)

Cool vintage drop bar end caps, from the 1970's and 1980's. Lovely green, somewhere between Kermit green and a mild British Racing Green Condition New old stock, just about perfect Details Pair  

NOS Benotto Rubber Handlebar End Caps: Brown Burgundy (Pair, MINT)

Cool vintage drop bar end caps, from the 1970's and 1980's. Earthy burgundy-ish, reddish brown Condition New old stock, just about perfect Details Pair Red/brown

Suntour Superbe Pro Brakeset: CB-4700 - Long 47-57mm - Recessed (EXC)

These brakes were used for both the Superbe and Superbe Pro groups from about 1979 to 1983 (and on through 1986 with allen bolt instead of acorn pivot bolt).  Made by DIA COMPE for Suntour, these are considered among the sidepull brakes made for...

NOS/NIB Benotto Professional Cello Bar Tape: Blue - Smooth - End Caps - Vintage 1970's 1980's

An old favorite for vintage road bikes!  This tape is thin, flexible, and does not get dirty! Benotto tape was introduced in about 1975 and ran through the mid 1980's and is a top choice for classic road bikes and L'Eroica rides.  This dark...

NOS Campagnolo #1014 Nuovo/Super Record Downtube Shifters: Clamp On - Black Cable Stops - Flat Plate s (Shop Dirt)

Super clean clamp version of the NR/SR DT shifters of the 60's, 70's, and 80's.  These have the flat cover plates (part #603), which were used up until the late 1970's. Condition New old stock, never installed.  These show zero cable marks in...

Andre Bertin C35 Carré(?) Frameset: 52cm x 54cm - Reynolds 531 / Vitus Durifort - Original Paint/Decals - Early 1970's - Stronglight V4 Headset

This lovely unrestored Bertin C35 is a 2nd in line Professional level French racing frame from the early 1970's.  It is second to the C37 in their line, which had full 531 tubing.  This one has Reynolds 531 3 tubes, and Vitus Durifort...

1972 Nishiki Professional Randonneur Conversion: 58cm - Unrestored - Chrome Lugs - Drillium - Cyclone GT - Mafac - Prior - Belt - Simplex - VO

This gorgeous Nishiki Pro is my personal bicycle.  I am sad to see it go, but I did more staring at it than riding it as I prefer fatter tires on Portland's rough roads.  It was among the final years they were built in the Katakura factory. It...

Race Face System Threadless Stem: 1 1/8" x 110mm x 25.4mm - Vintage 1990's (Mint)

Here's a super cool RaceFace stem from the late 1990's.   Very expensive when new.  I can't tell if this is a zero degree, or if it has a very small rise. Condition  Very close to mint, possibly a NOS take off...

Bikase Handlebar Cell Phone Holder Case: Iphone - Android - Samsung

Simple and effective way to display your cell phone on your handlebars.  Mounts securely to your stem via strong velcro.  Fully waterproof. Condition Like new or new Details Dimensions: 6.25" x 3"

NOS Shimano XTR FD-M953 Front Derailleur: 28.6mm - Bottom Swing - Top Pull

The FD-M953 is the traditional bottom swing version from the famous M950/M952 group. This one is a 28.6mm clamp, for standard diameter steel frame tubing.  Great retro looking, but modern ultra high performance derailleur for your older style...

Silca Impero Frame Pump: 1st Gen Flat Top - 1960's - Black - 46cm Body for 51cm to 53.5cm Frame (Near Mint+)

Super rare early version of the legendary Silca Impero, identified by it's motorcycle grip shaped handle with a rounded end. It was designed for use with a pump peg or umbrella clip, where as the later more common sleek cylinder handles had a cradle at...

Fabric Accubar Pressure Gauge: Attach to Pump or Standalone - 40psi MTB/Gravel (NEW)

Attach this to your pump for accurate pressure readings every pump, or use on it's own to check your tires.  It reaches 40psi max, making it ideal for precise accuracy on low pressure/high volume allroad, gravel, and mountain bikes. From the...

Fabric Millibar Dual Head Mini Pump: MTB High Volume (NEW)

Quick and easy to use mtb trail pump!  It is small enough to stick in a pocket, and also comes with a bracket to mount to your frame. From the manufacturer The ultimate trail pumpInflate your tyres fast on the trail with the Millibar hand pump...

Cannondale Si BB30 Carbon Crankset: 175mm - Compact 50/34t (Near Mint+ Low Miles)

Tough to find ~2012 era version of the SI crank.  I can't figure out if these were the Hollowgram model or a separate model. Condition Near mint or better hardly used shape.  These have less than 300 miles, and the only real wear to note is...

NOS 1965-1966 Campagnolo Record Rear Derailleur Steel-plated Bronze 1st Gen - 10t Pulleys (RARE & SPOTLESS)

This beauty is a COMPLETELY mint new old stock never installed 1965 to 1966 Record 1020 rear derailleur.  It belongs on a show bike, display case, or in a museum.   Model History Campagnolo released it's first modern parallelogram...

Honjo M79 Fender Stays: 58mm Wide for 650B -Pair (NEW)

Pair of fender stays for Honjo H79 fenders. Condition  New in package Details  Sold in pairs. No hardware

NIB/NOS Campagnolo Super Record A0R7 Seatpost: 25.0mm - Last Gen 1986-1989 (Not Aero/Fluted)

This is a VERY rare Campagnolo Record seatpost made in small numbers from 1986 to 1989. In 1986, Campy released the C-Record gruppo and phased out Super Record.  The flagship C-Record aero seatpost didn't fit the stylistic needs of the classic bikes...

Fujita Saddle Company Handlebar Bar End Caps: Black (Pair)

Cool vintage drop bar end caps, from the 1960's - 1970's. Condition Near mint, supple Details Black Pair

NOS Erickson Titanium Bottom Bracket: 156g! 122mm x 68mm Square Taper - Vintage 1990's - RARE

This is one of the ultimate square taper bottom brackets to come out of the 1990's aerospace era! It weighs a scant 156 grams, and sold for the insane price of $200 from roughly 1995-1998.  It uses a spindle stiffening method similar to Sampson and...

Campagnolo Spoke Protector: Alloy / Plastic (EXC)

This cool plastic and aluminum dork disc is an ultralight model from the 70's and 80's.  It's fairly large, and will cover a 34t large cog for touring or mtb use. Condition Excellent lightly used condition, with some light surface scratches. ...

2017 Pro Team-Issued Specialized SL Pro Long Sleeve Jersey: Medium - Lightweight - World Champ Stripes / Red / White (NEW)

This is a team issued Specialized SL Pro jersey issued to Howard Grotts.  I bought this from Howard Grotts himself at the Durango Devo Bike Swap (he never used this one).  It's a true pro team version, evidenced by the sponsor logos on the back...

Howard Grotts Worn Team-Issued Specialized SL Pro Short Sleeve Jersey: Medium - Lightweight - World Champ Stripes / Red / White (MINT+)

This is a team issued Specialized SL Pro jersey worn by Howard Grotts.  I bought this from Howard Grotts himself at the Durango Devo Bike Swap.  It's a true pro team version, evidenced by the sponsor logos on the back of the jerseys (the SL...

Howard Grotts Worn Team-Issued Specialized SL Pro Long Sleeve Jersey: Medium - Lightweight - Red & White (MINT+)

This is a team issued Specialized SL Pro jersey worn by Howard Grotts.  I bought this skinsuit from Howard Grotts himself at the Durango Devo Bike Swap.  It's a true pro team version, evidenced by the sponsor logos on the back of the jerseys...

Ned Overend Worn Team-Issued Specialized SL Skinsuit: XS - Lightweight - Red & White (Near Mint)

This is a team issued Specialized SL Skinsuit / Speedsuit worn by Ned Overend.  I bought this skinsuit from Ned himself at the Durango Devo Bike Swap.  It's a true pro team version, evidenced by the sponsor logos on the back of the jerseys (the...

NOS DIA-COMPE Bakelite Caliper Brake Bolt Caps (Pair): Dark Grey - BMX Nippon/MX - Threaded

These caps thread onto the back of the caliper mount bolt, outside of the nut.  They essentially cover the section of exposed threads outside of the nut.  They work for ALL nutted caliper and centerpull brakes that have a bit of thread outside...

Set of 6 NOS DIA-COMPE Bakelite Caliper Brake Bolt Caps: Dark Grey - BMX Nippon/MX - Threaded

These caps thread onto the back of the caliper mount bolt, outside of the nut.  They essentially cover the section of exposed threads outside of the nut.  They work for ALL nutted caliper and centerpull brakes that have a bit of thread outside...

NOS DIA-COMPE Bakelite Caliper Brake Bolt Caps (Pair): "D-C" - BMX Nippon/MX - Threaded

These caps thread onto the back of the caliper mount bolt, outside of the nut.  They essentially cover the section of exposed threads outside of the nut.  They work for ALL nutted caliper and centerpull brakes that have a bit of thread outside...

Set of 6 NOS DIA-COMPE Bakelite Caliper Brake Bolt Caps: "D-C" - BMX Nippon/MX - Threaded

These caps thread onto the back of the caliper mount bolt, outside of the nut.  They essentially cover the section of exposed threads outside of the nut.  They work for ALL nutted caliper and centerpull brakes that have a bit of thread outside...

NOS/NIB Formula DC-91 / Rockshox Front Hub: High Flange - Black - For Rim Brake & 3-Hole Rockshox Disc Brake

The Formula Racing DC91 front hub was a collaboration between White Industries and Rockshox, specifically made for Rockshox's then revolutionary disc brakes with 3 bolt rotors, from 1997-2001.  These are great for rim brake wheels on road bikes or...

NOS Benotto Rubber Handlebar End Caps: Red (Pair)

Cool vintage drop bar end caps, from the 1970's and 1980's. Condition New old stock, pristine and supple. Details Red Pair

NOS Cinelli Rubber Handlebar End Caps: Flying C Logo - Royal Blue (Pair)

Cool vintage drop bar end caps, made with the Flying C logo from 1978 to the late 1980's.  We have these in a few other colors HERE Condition New old stock. Details Royal blue Pair

NOS Cinelli Rubber Handlebar End Caps: Flying C Logo - Dark Blue (Pair)

Cool vintage drop bar end caps, made with the Flying C logo from 1978 to the late 1980's.  These ones are a dark blue, with an almost purple tint.   We have these in a few other colors HERE Condition New old stock. Details Dark blue Pair