Schwinn Tube Repair Kit in Red Can w/ Patches: Vintage 1960's Bicycle Memorabilia Display Item

This inner tube repair kit was found in nearly every bike shop and cyclist's garage in the 1960's and 1970's.  It would make a great gift of nostalgia for the bike nerd in your life.  They're cool as a display piece, or take it on your next...

Frost River Gunflint Trail Saddlebag: Waxed Canvas & Leather - Large 20L Transverse Carradice Style

For when you need a quality handmade saddlebag, and you need it to carry a LOT of stuff for your touring or bikepacking rig.  This attaches to your saddle loops/rails and to your seatpost.  It works both with and without a bag support or rack...

Brake Therapy Disc Brake Conversion Kit: Canti to I.S. 74mm - RARE (EXC)

This clever adapter converts your 26" wheel mountain bike with cantilever / V-Brake rear on the rear into disc compatible.  The rod mounts between a brake boss and the adaptor plate, which secures around the axle with a spring clip and safety...

Brake Therapy Disc Brake Conversion Kit: Canti to Hayes 22mm - RARE (EXC)

This clever adapter converts your 26" wheel mountain bike with cantilever / V-Brake rear on the rear into disc compatible.  This version is for the 22mm Hayes G1 & Hope C2 brakes.  The rod mounts between a brake boss and the adaptor plate,...

Chris King DH Wheelset: Disc-Go-Tech Hubs + Mavic D321 CD - 32H x 135mm - 9mm QR - Black - 8/9/10s (Near Mint+)

This is a top spec downhill MTB, freeride, and all mountain wheelset from the late 1990's and early 2000's.  It rides on Chris King's first disc brake hubs, the DiscGoTech laced to the bulletproof Mavic D321 ceramic rims at 36mm wide.  Chris...

Spot Brand Hard Anodized Chainring: 42t x 130mm Road - Champagne - USA Made One Fucking Speed! (NEW)

Lovely Made in USA chainrings from Golden, Colorado's Spot Bikes.  This ring is completely void of logos or engravings for a sleek and clean look.  They also lack shift pins/ramps and are designed for singlespeed, fixie, and 1x drivetrains (or...

NOS Salsa Chainring: 48t x 130mm - Silver Ano - CNC - Cyclocross - Commuter - Compact

Late 1990's or early 2000's Salsa chainring.  These look great on CNC cranks from Kooka, Cook Bros, Race Face, etc. Great for cx bikes, commuters, 1x setups... Condition New, no package.   Details 48t BCD: 130mm 5 bolt

NIB/NOS Salsa Chainring: 32t x 94mm - Black Ano - CNC

Late 1990's or early 2000's Salsa chainring.  These look great on CNC cranks from Kooka, Cook Bros, Race Face, etc. Great for middle rings, outer rings on DH bikes, or 1x and singlespeed setups. Condition New in package Details 32t BCD:...

NOS/NIB Salsa Tooth Fairy Triple Bash Guard: 104mm BCD x 44t Max

This chainring guard is designed to fit on the outside of a triple chainring's big ring.  Yes, you can have three chainrings and a bash guard with this or just use it as a standard bash ring replacing your outer ring!  You will need longer than...

NOS/NIB Salsa Ring Dinger Bash Guard: 94mm BCD x 36t Max

Great mountain bike bash ring, from Salsa.  These are often found on Surly Pugsley fat bikes, but are equally great on mtb's, cyclocross bikes singlespeed / fixies, and commuters. Condition New in retail packaging. Details BCD: 94mm 4 bolt...

NOS/NIB Salsa Ring Dinger Bash Guard: 104mm BCD x 36t Max

Great mountain bike bash ring, from Salsa.  These are often found on Surly Pugsley fat bikes, but are equally great on mtb's, cyclocross bikes singlespeed / fixies, and commuters. Condition New in retail packaging. Details BCD: 104mm 4...

1997 Bike Junkie's Bible Cannondale Catalog: Artsy & Fun - Saeco - Super V Raven - F2000 - Beast of The East

This quirky little catalog was released alongside the standard information based full sized catalog in the mid 1990's.  It is full of whimsy and spunk, real model and frame info, and even a little turtle character!  This is quite rare, and...

Thomson Elite Seatback Seatpost: 27.2mm x 330mm - Black (New Take-off)

The Thomson Elite is one of the stiffest and strongest posts made, and looks bomb. Condition New, take off.  Just a touch of the lightest insertion marks.  Details 27.2mm Length: 330mm Setback: 16mm Black  

Race Face Prodigy XC Crankset: 175mm x 32/22t + Bash Ring - ISIS - 104/64mm (Near Mint LOW MILES)

Bulletproof and attractive ISIS crank from RF!  This one leads with a big beefy bash ring, with a 32/22t setup. Condition Near mint or better with low miles.  Aside from the obvious heel rub on the outer edges and a touch of scuffing on the...

Vintage 1970's Michelin Man Bibendum Bicycle Tires Poster: Large - 32" x 20" (NOS)

This rare piece of Michelin Man ephemera was issued to bike shops carrying Michelin tires in 1977, issued as a set including stickers, cardboard display pieces, posters, etc.    This would make a wonderful gift for vintage bicycle enthusiasts,...

Vintage 1970's Michelin Man Bibendum Bicycle Tires Sticker: Large - 12" x 6" (NOS)

This rare piece of Michelin Man ephemera was issued to bike shops carrying Michelin tires in 1977.  It has a split back for easy removal.    This would make a wonderful gift for vintage bicycle enthusiasts, Americana decoration lovers,...

NOS/NIB Vintage Benotto Professional Cello Bar Tape: French & USA Flag - Tri Color Red-White-Blue - Smooth Type

Rare patriotic color scheme on the famous Benotto Cello-Tape!  These colors are both of the French flag and the USA flag. Condition New Details Red, white, and blue Blue handlebar end caps Smooth Type

NIB/NOS 3DV Purple Advent Billy Goat Bar Ends! 145g - Cutouts - Vintage 1990's - CNC Ano Alloy - Plugs

This rad set of 3D Violet purple anodized handlebar extension bar ends look beefy!  They almost look like the hilt and blade of a sword or dagger.  They feature two large shapely cutouts.  Bolts look to be either stainless steel or ti...

NIB/NOS 3DV Purple ATI Optare II Bar Ends! Vintage 1990's - USA Made - Adjustable Angle - CNC Ano Alloy + Stainless Bolts - Plugs

This rad set of 3D Violet purple anodized bar ends are made in the USA, but relatively little is known of them.  Perhaps ATI didn't make them very long.  They are CNC cut from 6061-T6 heat treated aluminum, with stainless steel bolts. They...

Klein Spinner Rigid MTB Fork: 1" Threaded - Horizon Linear Fade Blue/Purple/Pink - For Rascal / Pinnacle - Fender Eyelets

This fork was stock on the early 1990's Klein Pinnacle, Pinnacle Elite, Rascal, and other mountain bikes that weren't Adroit/Attitude's oversized quill.  This one is in the famous and loud "Horizon Linear Fade" color scheme, which starts with...

McMahon MCR Power-Link Scissor Brake w/ Booster Plate: Black (Almost NOS!)

A nearly unused (or perhaps even a take off?) example of the early 1990's McMahon Racing Components PowerLink Scissor brake, complete with the optional McMahon Racing brake booster plate.  This brake is the stuff of legends.  It is claimed to...

White Brothers Ti Bar: DH Riser Titanium Handlebar - 660mm x 25.4mm w/ Shim - Vintage 1990's

Ultra rare riser bar from White Bros, circa 1990's.  These have a nice 660mm uncut length.  They look really similar to the Titec Hellbender ti, but with a slightly higher/sharper rise.  Perfect for your retro mtb restoration!  These...

NOS McMahon Racing Cycles (MRC) Titanium Handlebar: Flat Bars - 575mm x 25.4mm Polished Ti (No Shim Required)

Super rare titanium bar from 1990's American builder Steve McMahon of McMahon Racing Cycles.  This one is a 25.4mm clamp diameter.  The early 1990's MCR bars required a shim, and I could guess this one is a little later since it's shaped out to...

NOS McMahon Racing Cycles (MRC) MTB Titanium Quill Stem: 145mm x 25.4mm - Zero Degree

Gorgeous and rare!  This stem is from the 1990's, and was made by Steve McMahon of McMahon Racing Cycles.  The stem is fully Ti-3-2.5, with a 6Al-4V ti expander bolt and stainless steel clamp bolt. It features a cantilever cable stop...

Oveja Negra Lunchbox Handlebar Bag: 3L - Slate Grey - Bikepacking (Almost NEW)

Compact handlebar bag that can be run by itself or added to the Oveja Negra Front End Loader dry bag mount!  It's shoulder strap is removable via carabiner clips built in. From the manufacturer: The Lunchbox™ handlebar bar helps to stabilize...

Oveja Negra Half Frame Bag: Large - Slate Grey - 4 Liter - Bikepacking (Almost NEW)

Top notch and perpetually sold out bikepacking pack!  From the manufacturer: The 1/2 Pack™ is our partial frame bag that allows for gear storage within your triangle while still leaving room to run water bottles/cages.  Available in four...

Ringle Trail Roller Stem: 1" Quill - 140mm x 25.4mm - High Rise - Canti Stop - Black (EXC+)

Truly one of the holy grails of the early 1990's mountain bike scene!  These were made roughly 1990 to 1992, and are exceedingly difficult to find (especially in this riser version).  It's in the same vein of the Kooka Billet stem and the...

Grafton Speedtrap MTB Pedals: Near NOS! Silver Ano - 295g - Vintage Early 1990's RARE

The Speed Trap Mountain Bike pedals are the brainchild of John Grafton, released ~1991.  They offered a radically light pedal that can be used as a clipless pedal (and weigh 200g less than the Shimano SPD of the day), a platform pedal, or with toe...

NIB/NOS Salsa Cycles Moto Quill Road Stem: 120mm x 25.4mm - 90 DEG / Zero Rise - Gold Cap - Black

1990's Salsa Moto MTB stem with a tough to find zero rise and no-logo format.  Perfect for your retro 1990's show bike restoration.  Complete with sales tag. Condition New old stock with sales tag.  It does have a touch of shop wear (or...

Zanconato Chainring Set: Cyclocross 38/48t x 130mm Shimano/Sram - RARE

Uber rare set of cx chainrings, handmade in the Massachusetts workshop of custom frame builder Mike Zanconato!  These were attention getters in the 2010/2011 Interbike & NAHBS circuits.  They represent a small niche of American made...

White Industries ENO Rear Hub: 36H x 122.5mm (Respaced, fits 120mm & 126mm Frames) Black - SS/Fixie/Track (MINT)

This ENO hub was custom spaced with White Industries parts to 122.5mm.  This size is designed to fit both 120mm and 126mm frames.  These only come in 130mm and 135mm, making this a pretty unique piece!  Great for retrofitting your old...

Chris King GripNut No-Logo 1" Threaded Headset: Red - Vintage 1990's (Near MINT+)

Rare NO LOGO Grip Nut from the 1990's!  These are difficult to find in no-logo format, and they're what you need for your retro MTB restoration. The GripNut™ headset is designed for threaded forks that don’t require a cable hanger...

Chris King Spacer Kit: Gold - 1 1/8" - 2pc 12mm & 25mm (NEW)

Deep glossy gold CK spacers! The color is close to gloss Mango, but a lil bit more gold than Mango's orange. It's a bit richer in color than what is usually listed as gold (see our gold Ceramic BB).  Includes a 12mm spacer and 25mm spacer...

ONZA Chill Pills Cable Carrier: TURQUOISE - Sotto Voce (EXC+)

Rare turquoise Chill Pill, with a very subtle logo.  Was it made like this? Did someone try to remove the logo and that was the imprint left?  Highly popular straddle cable yokes from the 1990's.  They originally came with the O.N.Z.A. H2O...

Tom Ritchey Fillet Brazed Steel Stoker Stem From Skyliner Tandem: 27.0m - 140mm x 25.4mm - Purple

Masterfully fillet brazed tandem stoker stem from a 1980's Ritchey Skyliner! Even if you don't ride a tandem, this is an inexpensive way to own a piece of steel brazed by Tom Ritchey himself. Condition Excellent used shape.  The paint has wear...

NIB/NOS SRP Titanium Pedal Kit for XT PD-M737 & PD-A525: TL-PD40 SPD Tool - Spindles / Cartridge Needle Bearings / Stronger Alloy Sleeves (RARER)

Ultra rare Ti rebuild kit for both the legendary MTB XT SPD PD-M737 pedals and the A525 single sided road SPD.  These are an over the top upgrade for your weight weenie fully anodized out retro mtb show bike, or simply for those still riding either...

NIB/NOS Salsa Moto S.U.L Quill Stem: 1" x 50mm x 26.0mm x 90D - Removable Faceplate - Zero Rise - Vintage 1990's - Black/Gold/Grey #SM8370

Super short 1st edition S.U.L. (Stiff Upper Lip) stem from the late 1990's and early 2000's, long before the recalled 2010 version (which was all black and had hash marks in the clamp area). Removeable face plate for easy bar installation...

NIB/NOS Crud Claw Cassette Cleaner Gizmo Gadget: Retro 1990's Weirdness - Black Anodized

This little trinket from the wild and weird early 1990's attached to your dropout under your quick release, and weaved through your cassette cogs to clean the mud and gunk as you pedal.  Did they work? I don't know. Never used one myself.  But...

Mathauser Scott Superbrake Finned Pads: Threaded Post BMX / Cantilever Style One Pair Holders Two Pair NOS Pad Inserts

Pretty rare canti version of the finned Scott Superbrake pads, in black w/ salmon.  Two pad holders and set of four NOS rubber pad inserts.  All original hardware included (each pad holders includes two concave washers and one flat washer along...

NOS 1990's Anodized Billet Aluminum 1 1/8" Stem Top Cap: Cobalt Blue - Drillium (ish)

A must have you didn't know you needed if you're building a retro mtb from the 1990's with Cobalt Blue ano parts! Condition New old stock Details 1 1/8"  

Cook Bros Racing VGS Dogbone Quill Stem: 1 1/8" x 135mm x 0 Rise - RARE 1990s (Near Mint LOW Miles)

One of the true holy grails of the early 1990's retro mtb scene!  This VGS stem was made only for one year (1992), and in very low numbers.  If it reminds you of Cook Brother's cranksets, that's because it borrows their ball-end design...

Norther Cycles Klickitat Custom Steel Quill Stem: Fillet Brazed - 80mm x 26.0mm - 170mm Tall - Two Bolt (Almost New))

This gorgeous stem was fillet brazed by Star Bowman of Norther Cycles fork his business partner's Klickitat randonneur.  This was the design and color scheme that was offered as an upgrade to every Klickitat semi-custom frame at a cost of $500...

Cook Brothers Racing Granny Chainring: 22t x 58mm - Ti Finish (MINT)

Seldom seen Cook Brothers inner chainring in a finish that looks like titanium or stainless steel for your 94/58mm BCD MTB crank. Condition Mint barely used shape. Details 22T BCD: 58mm (for 94/58mm triple crank)

NIB/NOS Avitar Triple Inner Chainring: 23t x 58mm

These late 1990's to mid 2000's American-made chainrings were popular aftermarket upgrades for boutique cranksets such as Kooka, Grafton, and Ringle cranks.  They're lightweight, durable, and look great on vintage cranks.   Condition New...

NOS Schwinn Sweetheart Skiptooth Sprocket / Chainring: 26t - 1940's - Chrome

This is aesthetically one of my favorite chainrings, and IMO the most attractive of the heart-shaped cutout chainrings (Columbia, Hawthorne, and Colson also made one).  Schwinn made these both pre-war and post-war in the 1930's, 1940's, and 1950's...

NOS Erickson Titanium Bottom Bracket: 156g! 122mm x 68mm Square Taper - Vintage 1990's - RARE

This is one of the ultimate square taper bottom brackets to come out of the 1990's aerospace era! It weighs a scant 156 grams, and sold for the insane price of $200 from roughly 1995-1998.  It uses a spindle stiffening method similar to Sampson and...

Chris King No Logo Nothreadset Cups: 3DV Purple - 1 1/8" - Vintage 1990's (EXC)

This is a pair of hard to find 1st gen threadless CK headset cups, in the original 3DV purple.  They don't have bearings, these are just the cups. Condition Excellent used shape.  Anodizing is not worn. One of the cups has two decent sized...

ENVE CX Carbon Disc Fork: Wild Custom Powdercoat- Tapered - QR - Peach/Neon Green/Grey (New Take-Off)

Radical and loud is the name of the game with this cross/gravel fork!  It has a high detail custom splatter paintjob on the lower section of the legs, with a matte grey for the crown and a few inches top of legs.  Unknown painter, but I...