COMPONENTS

Honjo H79 Sliding Bracket: For 58mm Turtle (NEW)

This sliding bracket is used to mount the rear fenders on bikes where the seatstay bridge is not drilled at the bottom for direct fender mounting.  This one is for 58mm wide fenders to fit 650b x 42 tires or 26" rat trap pass tires.  Fits...

Nitto / Sim Works 120mm Straight Connection Rod For Racks: Black (Pair, NEW)

Nitto made rack to frame connecting rods. Condition New in retail package Details 120mm, straight

NIB/NOS Shimano Derailleur Cable Anchor Bolt, Nut, & Washer: #5419901

This is an OEM cable fixing anchor bolt assembly for a variety of rear derailleurs.  This style of bolt was very common on mid and low end derailleurs in the 1980's, but they were found on other age and high end derailleurs as well.  The bolt...

Shimano Deore XT BR-M734 Cantilever Brakeset: Early 1990's - Low Profile - Silver (EXC)

Low profile XT canti brakes from the early 1990's, great for your retro mtb restorations. Condition Excellent used shape.  All hardware included.  Arms have minimal marks and hardware is in great shape.  Pads have ~80% life left. ...

NIB/NOS TA Pro 3 Attaches Pista Chainring Bolt Set: REF P23 - Single Ring

Set single ring chainring bolts for TA 3 arm cranks. Condition New in package, pristine  

NIB/NOS Campagnolo Super Record A0R7 Seatpost: 25.0mm - Last Gen 1986-1989 (Not Aero/Fluted)

This is a VERY rare Campagnolo Record seatpost made in small numbers from 1986 to 1989. In 1986, Campy released the C-Record gruppo and phased out Super Record.  The flagship C-Record aero seatpost didn't fit the stylistic needs of the classic bikes...

NOS Hunt-Wilde Cruiser / Muscle Bike / BMX Grips: 1960's 1970's 1980's - Black

Original grips for vintage muscle bikes, cruisers, bmx, Stingray... Condition New old stock, pristine. Not dry Details Pair

NOS Mory Stainless Steel Seatpost Pin: 26.0mm - BMX

Rare BMX seatpost, probably from the 1980's Conditon New old stock, minimal shop wear Details 26mm

NOS Campagnolo C-Record Graphite Powergrade Brake Lever: Single - 3rd/4th Gen

This is a single C-Record PowerGrade brake lever in the increasingly rare "Graphite" finish.  The Graphite was a darker grey than the Century finish, which was only offered at the Record level. These were issued with both later generation Delta...

Fujita Saddle Company Handlebar Bar End Caps: Black (Pair)

Cool vintage drop bar end caps, from the 1960's - 1970's. Condition Near mint, supple Details Black Pair

Magura Julie Brake Pads: Organic (NEW)

Clark brand brake pads for Magura Julie brakes Condition New Details Pair Organic Cotter pins not included

Jagwire Mini Inline Adjusters: Black (pair, New)

These little barrel adjusters are installed on your brake cable housing run near the shifters, and allow for quick adjustments to your derailleurs.   Condition New, though a few have light marks from shop wear. Details Black Pair

NOS Vintage Gipiemme Seatpost Binder Bolt / Pin: Outer Bolt Only - Chrome (rare!)

Italian made Campagnolo clone from the 1970's to mid 1980's!  Engraved/pantograph Gipiemme logo on head.  Quite rare.  This is only the threaded bolt, you will have to source your own nut. Fits a standard Campy, Sugino, or otherwise...

Christophe Toe Clip Mounting Hardware: Plates & Bolts (NIB/NOS Pair)

High quality OEM toe clip mounting hardware that comes with Christophe toe clips.  Included is a two mounting plates that go between the toe clip and the pedal cage, four mounting bolts and nuts. Enough for one set of pedals, works with all standard...

NOS Suntour Quick-Band Seatpost Binder QR Clamp: For Lawwill Pro Cruiser - 28.6mm - #1091 - "Quick Pattern" (STUPID RARE!)

Every now and then, you come across that unicorn holy grail part, and this is one of those times! This is a mid 70's to about 1982 Suntour "Quick Band" quick release seat post clamp, that came stock on ~1978 to 1982 Mert Lawwill-Knight Pro Cruiser. ...

NOS Mafac Tandem Dual Cable Brake Lever: Course 121 - 1950's 1960's

This lever is designed to control two brakes from one lever, and was marketed to tandem bikes (particularly when running both a drum brake and rim brakes).  These are a half hood design, and the hoods with 2 cable holes are extremely rare...

NOS DIA-COMPE Bakelite Caliper Brake Bolt Caps (Pair): Dark Grey - BMX Nippon/MX - Threaded

These caps thread onto the back of the caliper mount bolt, outside of the nut.  They essentially cover the section of exposed threads outside of the nut.  They work for ALL nutted caliper and centerpull brakes that have a bit of thread outside...

Set of 6 NOS DIA-COMPE Bakelite Caliper Brake Bolt Caps: Dark Grey - BMX Nippon/MX - Threaded

These caps thread onto the back of the caliper mount bolt, outside of the nut.  They essentially cover the section of exposed threads outside of the nut.  They work for ALL nutted caliper and centerpull brakes that have a bit of thread outside...

NOS DIA-COMPE Bakelite Caliper Brake Bolt Caps (Pair): "D-C" - BMX Nippon/MX - Threaded

These caps thread onto the back of the caliper mount bolt, outside of the nut.  They essentially cover the section of exposed threads outside of the nut.  They work for ALL nutted caliper and centerpull brakes that have a bit of thread outside...

Set of 6 NOS DIA-COMPE Bakelite Caliper Brake Bolt Caps: "D-C" - BMX Nippon/MX - Threaded

These caps thread onto the back of the caliper mount bolt, outside of the nut.  They essentially cover the section of exposed threads outside of the nut.  They work for ALL nutted caliper and centerpull brakes that have a bit of thread outside...

NIB/NOS Dia Compe BRS Road Brake Cable & Housing Set: Black - Vintage 1980's 1990's - Front & Rear - AGC Ferrules

This vintage mid 1980's to mid 1990's cable set was an aftermarket offering of what came with aero DIA COMPE & Aero Gran Compe levers.  It's just standard high quality cable/housing, with the addition of the special cable ferrules required for...

Shimano 10 Speed Chain Pins: 5 Pack - Dura Ace/Ultegra/Tiagra/XTR/XT/SLX...

These chain connecting pins fit all Shimano 10sp chains, including Dura Ace cn-7800, Ultegra, Tiagra, Sora, XTR, XT, SLX, Deore.   The one exception is these do NOT fit Dura Ace 7900 chains, which have their own pin. *This is a pack of FIVE...

NOS Onza H.O. Pedal Elastomers: Black - Extra Firm (Set of 4)

This elastomer set will restore your tired O.N.Z.A. High Output clipless pedals to new function!  These came in four different firmness levels; Clear has an A/58 hardness, Grey an A/71, Blue is A/79 and Black is A/91. The higher the Durometric...

NOS Onza H.O. Pedal Elastomers: Blue - Firm (Set of 4)

This elastomer set will restore your tired O.N.Z.A. High Output clipless pedals to new function!  These came in four different firmness levels; Clear has an A/58 hardness, Grey an A/71, Blue is A/79 and Black is A/91. The higher the Durometric...

NOS Benotto Rubber Handlebar End Caps: Red (Pair)

Cool vintage drop bar end caps, from the 1970's and 1980's. Condition New old stock, pristine and supple. Details Red Pair

NOS Cinelli Rubber Handlebar End Caps: Flying C Logo - Dark Blue (Pair)

Cool vintage drop bar end caps, made with the Flying C logo from 1978 to the late 1980's.  These ones are a dark blue, with an almost purple tint.   We have these in a few other colors HERE Condition New old stock. Details Dark...

NIB/NOS Campagnolo Model Competition Brooks Record Narrow Rail Seatpost: 27.0mm - Model 1045 - 1950s 1960s EXC RARE

From 1958 to roughly 1961, Campagnolo made the Brooks Competition narrow railed version of their 2-bolt Record seatpost.  This one is model 1045, the standard 2-pin Record post is model 1044.  Brooks (Brooks Campagnolo Modell), Ideale, and...

Antique Lauterwasser Handlebar: 1930's Path Racer - Steel - VERY RARE (Exceptional)

This is an original 1920's or 1930's vintage Lauterwasser bar!  These are absurdly scarce, and when they do pop up they're typically covered in rust.  This one is in excellent shape, with an even patina and a decent shine. Lauterwasser bars...

Soma Thick & Zesty Handlebar Tape: 2.5mm Thick - Rose Pink (Neon Pink)

Lovely affordable bar tape from Soma Fabrications.  Shock absorbent, 2.5mm thick, comfy and grippy From the manufacturer: "Primary material is a special formulation of EVA (ethylene vinyl acetate)resin. This material is the result of extensive...

NOS Proflex Swing Arm Cap / Plug: Black Rubber

These are the little black plugs that fit into the pivots that always get lost. Condition New old stock

NOS Vintage Phil Wood Knurled Track Lockring: For 3-Piece Hubs - Left Thread 1.32" x 24 TPI

These are the ridged lock rings that came with early Phil Wood 3 piece pista hubs from the 1970's and early 1980's.  The left hand threaded ring's diameter is 1.32" x 24 TPI, which fits Phil Wood and Campagnolo track hubs.  Stupid rare...

NEW Cane Creek 40 Aheadset IS42 Short Headset: 1 1/8" Threadless

Nice black headset for IS42 bikes.   Condition New in box Details 1 1/8" Bearing Type: Sealed 41.8mm cartridge  Color: Black Crown Race: 30.015 Top stack height: 9mm Bottom stack height: 1mm

Yokozuna Scott/Mathauser Campagnolo 2000+ Brake Pad Inserts: (pair)

Brake pad inserts for modern Campagnolo brakes, from the year 2000 to 2010.  This includes all 10 speed brakesets.   Condition Brand new Details For alloy braking surface wheels One pair (two pads, enough for one wheel) 200RI-BLK Campi 2000 ...

Shimano 10 Speed Chain Pin

This is the only way to connect your genuine Shimano 10 speed chain.  Includes one pin. Condition New Details Width: 6.1mm

Hayes Louisa / Clara Endurance Brake Pads (pair)

Kool Stop sintered pads for Hayes Louise and Hayes Clara Endurance disc brakes. Condition New Details One pair (enough for one wheel) We may have multiple pairs of these. Select your quanity on the right

NOS Campagnolo #617 Steel Coil Derailleur Housing: Custom Length ($1 per CM)

This is sold by the cm.  Want 10cm of housing? Order 10 of these for ~$10. The vast majority of high quality road bicycles from the 1950's through 1970's (especially Italian bikes) used a stainless steel "spring" type housing loop for the rear...

Cane Creek 110 Series Headset 1.5" Crown Race: 52/30 NEW

This is a crown race to fit a Cane Creek 110 series headset, in a 1.5" tapered or straight steerer. Condition Brand new Details 1.5"

Beefy Pyramid Cantilever Brake Pads: Old School Style

These are great if you have a retro mountain bike which came with those oversized cantilever pads.  You can't find pads like these anymore! Details 1 pair black